Items where Division is "Faculty of Engineering and Natural Sciences" and Year is 2021

Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | R | S | T | U | Y | Z | Ç | Ö | İ | Ş
Number of items: 231.


Abbasiasl, Taher and Mohammadpour Chehrghani, Mirvahid and Khalili Sadaghiani, abdolali and Koşar, Ali (2021) Gradient mixed wettability surfaces for enhancing heat transfer in dropwise flow condensation. International Journal of Heat and Mass Transfer, 179 . ISSN 0017-9310 (Print) 1879-2189 (Online)

Abdennebi, Anes and Elakaş, Anıl and Taşyaran, Fatih and Öztürk, Erdinç and Kaya, Kamer and Yıldırım, Sinan (2021) Machine learning-based load distribution and balancing in heterogeneous database management systems. Concurrency and Computation: Practice and Experience . ISSN 1532-0626 (Print) 1532-0634 (Online) Published Online First

Abdollahzadeh, Mohammadamin and Tabrizi, Isa Emami and Kefal, Adnan and Yıldız, Mehmet (2021) A combined experimental/numerical study on deformation sensing of sandwich structures through inverse analysis of pre-extrapolated strain measurements. Measurement: Journal of the International Measurement Confederation, 185 . ISSN 0263-2241 (Print) 1873-412X (Online)

Aboubakri, Akam (2021) Effect of mixed wettability surfaces on droplet evaporation and flow boiling. [Thesis]

Açılan, Elit (2021) Green's function and density of states of bounded P-wave superconductors. [Thesis]

Adak, Ömer Kemal (2021) Whole-body bound gait control of a quadruped robot equipped with anactive spine joint. [Thesis]

Adak, Ömer Kemal and Bahçeci, Beste and Erbatur, Kemalettin (2021) Hybrid force-motion control for one-legged robot in operational space. In: 2021 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (AIM 2021), Online (Delft, Netherlands)

Aghaei, Vahid Tavakol and Ağababaoğlu, Arda and Yıldırım, Sinan and Onat, Ahmet (2021) A real-world application of Markov chain Monte Carlo method for Bayesian trajectory control of a robotic manipulator. ISA Transactions . ISSN 0019-0578 Published Online First

Ahmad, Waqar (2021) Efficient HEVC and VVC motion estimation hardware. [Thesis]

Ahmad, Waqar and Ayrancıoğlu, Berke and Hamzaoğlu, İlker (2021) Low error efficient approximate adders for FPGAs. IEEE Access . ISSN 2169-3536 Published Online First

Ahmed, Kazi Sher (2021) Design of active magnetic bearing spindles for micro-milling applications. [Thesis]

Akbari, Vahid and Sadatizamanabad, Mirehsan Hesam and Kian, Ramez (2021) A decomposition-based heuristic for a multicrew coordinated road restoration problem. Transportation Research Part D: Transport and Environment, 95 . ISSN 1361-9209 (Print) 1879-2340 (Online)

Aktaş, Ali Furkan (2021) Full-body motion control of a humanoid robot. [Thesis]

Aktaş, Ethem Utku (2021) Automated software issue triage in large scale industrial context. [Thesis]

Akülkü, İrem (2021) Mapping the distribution of the octopamine beta receptor subtype-2 in the honeybee (apis mellifera) brain. [Thesis]

Al Ayoubi, Muhammed Moyasar (2021) Chemical biomarker profiles extraction for honeybee pathogens using machine learning. [Thesis]

Alan, Salih and Bediz, Bekir (2021) A novel electromechanical spectral element method for piezoelectric energy harvester plates. Journal of Sound and Vibration, 505 . ISSN 0022-460X (Print) 1095-8568 (Online)

Alexiadis, Alessio and Albano, Andrea and Rahmat, Amin and Yıldız, Mehmet and Kefal, Adnan and Özbulut, Murat and Bakırcı, Nadi and Garzon Alvarado, Diego Alexander and Duque-Daza, Carlos Alberto and Eslava-Schmalbach, Javier Hernando (2021) Simulation of pandemics in real cities: enhanced and accurate digital laboratories. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2245). ISSN 1364-5021 (Print) 1471-2946 (Online)

Ali Ahmed, Sara Atito (2021) Deep learning ensembles for image understanding. [Thesis]

Ali Ahmed, Sara Atito and Zor, Cemre and Awais, Muhammad and Yanıkoğlu, Berrin and Kittler, Josef (2021) Deep convolutional neural network ensembles using ECOC. IEEE Access, 9 . pp. 86083-86095. ISSN 2169-3536

Ali Pour, Mahdi (2021) Testitalready: A code-free approach for authoring executable and maintainable test cases for non-technical stakeholders. [Thesis]

Aliyeva, Nargiz and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2021) Recent developments on the overmolding process for the fabrication of thermoset and thermoplastic composites by the integration of nano/micron-scale reinforcements. Composites Part A: Applied Science and Manufacturing, 149 . ISSN 1359-835X (Print) 1878-5840 (Online)

Almasi, F. and Shadloo, M. S. and Hadjadj, A. and Özbulut, M. and Tofighi, Nima and Yıldız, Mehmet (2021) Numerical simulations of multi-phase electro-hydrodynamics flows using a simple incompressible smoothed particle hydrodynamics method. Computers and Mathematics with Applications (SI), 81 . pp. 772-785. ISSN 0898-1221 (Print) 1873-7668 (Online)

Alptekin, Halit (2021) Trapdroid: Bare-metal android malware behavior analysis framework. [Thesis]

Anbar Meidl, Nurdagül and Kalaycı, Tekgül and Meidl, Wilfried (2021) Analysis of (n, n)-functions obtained from the Maiorana-McFarland class. IEEE Transactions on Information Theory, 67 (7). pp. 4891-4901. ISSN 0018-9448 (Print) 1557-9654 (Online)

Anbar Meidl, Nurdagül and Kaşıkçı, Canan (2021) Permutations polynomials of the form G(X)(k) - L(X) and curves over finite fields. Cryptography and Communications, 13 (2). pp. 283-294. ISSN 1936-2447 (Print) 1936-2455 (Online)

Anbar Meidl, Nurdagül and Stichtenoth, Henning and Tutdere, Seher (2021) Asymptotically good towers of function fields with small p-rank. Finite Fields and Their Applications, 76 . ISSN 1071-5797 (Print) 1090-2465 (Online)

Ansari Hamedani, Ali (2021) Development of silicon/carbon nanocomposite anodes from simple precursors for lithium-ion batteries. [Thesis]

Atar, Büşra (2021) A study on binomial edge ideals. [Thesis]

Ayar, Hayrettin (2021) Digital self-interference cancellation for in-band full-duplex communication. [Thesis]

Aydın, Mehmet Serhat and Bilgili, Hatice Kübra and Kızıltaş, Güllü and Emanet, Melis and Özaydın İnce, Gözde (2021) Fabrication and analysis of surface functionalized porous pcl-nha scaffolds with p(hema-co-egdma) hydrogel via icvd and bmp-2 release simulation. In: ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE 2020), Virtual, Online

Aydın, Mustafa (2021) Intelligent cyber attack detection using social media posts. [Thesis]

Azgari, Cem and Kılınç, Zeynep and Turhan, Berk and Çirci, Defne and Adebali, Ogün (2021) The mutation profile of SARS-CoV-2 is primarily shaped by the host antiviral defense. Viruses, 13 (3). ISSN 1999-4915


Bagherzadeh, Amin and Kuram, Emel and Budak, Erhan (2021) Experimental evaluation of eco-friendly hybrid cooling methods in slot milling of titanium alloy. Journal of Cleaner Production, 289 . ISSN 0959-6526 (Print) 1879-1786 (Online)

Balazadeh Koucheh, Amin (2021) Broadband reflectivity and emissivity engineering using patterned surfaces. [Thesis]

Balci, Özge and Buldu, Merve and Ammar, Ameen Uddin and Kiraz, Kamil and Somer, Mehmet and Erdem, Emre (2021) Defect-induced B4C electrodes for high energy density supercapacitor devices. Scientific Reports, 11 (1). ISSN 2045-2322

Barak, Melike and Sheibani Aghdam, Araz and Seviniş, Emine Billur and Ünal, Serkan and Cebeci, Fevzi Çakmak (2021) Layer-by-layer assembly of nanofilms from colloidally stable amine-functionalized silica nanoparticles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 630 . ISSN 0927-7757 (Print) 1873-4359 (Online)

Barsakçı, Burcu (2021) Simultaneous rational periodic points of degree-2 rational maps. [Thesis]

Barzegar Osgouei, Zahra (2021) A novel analytical temprature model development for turning in orthogonal and oblique conditions including the effects of all deformation zones and tool wear. [Thesis]

Başoğlu, Muhammed Fatih and Zerin, Zihni and Kefal, Adnan and Öterkuş, Erkan (2021) Development of a micro-crack toughening mechanism for unidirectional composite plates by using peridynamics. In: 24th International Conference on Composite Structures (ICCS24), Porto, Portugal

Bayraktar, Can (2021) Development of a thermomechanical finite element model for laser powder bed fusion process and its comparison with inherent strain method. [Thesis]

Beken Fikri, Figen and Oflazer, Kemal and Yanıkoğlu, Berrin (2021) Turkish dataset for semantic textual similarity [Anlamsal metin benzerliği için Türkçe veri kümesi]. In: 29th Signal Processing and Communications Applications Conference (SIU), Istanbul, Turkey

Bilal, Diyar Khalis (2021) Developing Learning Algorithms for Enhancing Industrial Machine Vision Systems and Improving Task Accuracy of Robotic Manipulators. [Thesis]

Bilal, Diyar Khalis and Ünel, Mustafa (2021) Increasing trajectory tracking accuracy of industrial robots using SINDYc. (Accepted/In Press)

Bilal, Diyar Khalis and Ünel, Mustafa (2021) Increasing trajectory tracking accuracy of industrial robots using SINDYc. In: Embedded Systems, Computational Intelligence and Telematics in Control - 4th CESCIT 2021, Valenciennes, France

Bilecen, Ali Enver (2021) Anomaly detection for video-based surveillance using covariance features and modeling of sequences via LSTMS. [Thesis]

Bilgili, Hatice Kübra and Özaydın İnce, Gözde and Emanet, Melis and Kızıltaş, Güllü (2021) Fabrication of 3D bone scaffolds functionalized with spatiotemporal release of BMP-2 growth factor via iCVD to enhance osteoregeneration. In: ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE 2020), Virtual, Online

Bozkurt, Ahmet Mert (2021) Quantum thermodynamics, spintronics and zero mode statistics in topological matter. [Thesis]

Burak, Abdurrahman (2021) 4x1 Mimo compact half duplex RF T/R module with high resolution in 130 NM sige bicmos for 5G applications/. [Thesis]


Can, Başarbatu and Özkan, Hüseyin (2021) Bağlam ağaçları ile neyman-pearson sınıflandırması. In: 2020 28th Signal Processing and Communications Applications Conference (SIU), Gaziantep, Turkey

Cantürk, Bilal (2021) Entropic uncertainties in quantum measurements. [Thesis]

Cantürk, Bilal and Gedik, Zafer (2021) Optimal upper bound of entropic uncertainty relation for mutually unbiased bases. Physica A: Statistical Mechanics and Its Applications, 582 (126275). ISSN 0378-4371

Cin, Ayşe Nur (2021) Identifying characteristic properties and antioxidant effect of quercetin loaded titanium dioxide nanoparticles. [Thesis]


Dayan, Alp Recep and Yeşilyurt, Serhat (2021) Modeling and simulations for magnetic manipulation of micro objects with a visual control system. In: Signal Processing and Communications Applications (SIU 2021), Online (Çevrim İçi)

de Sá Rodrigues, Francisco and Marques, Ricardo Emanuel Monteiro Casaca and Emami Tabrizi, Isa and Kefal, Adnan and Ali, Hafiz Qasim and Yıldız, Mehmet and Suleman, Afzal (2021) A new methodology for thermoelastic model identification in composite materials using digital image correlation. Optics and Lasers in Engineering, 146 . ISSN 0143-8166 (Print) 1873-0302 (Online) Published Online First

Demir, Durmuş Ali (2021) Emergent gravity as the eraser of anomalous Gauge Boson masses, and QFT-GR concord. General Relativity and Gravitation, 53 (2). ISSN 0001-7701 (Print) 1572-9532 (Online)

Demir, Durmuş Ali (2021) Naturally-coupled dark sectors. Galaxies, 9 (2). ISSN 2075-4434

Demir, Durmuş Ali and Karahan, Canan and Sargın, Ozan (2021) Type-3/2 seesaw mechanism. Physical Review D, 104 (7). ISSN 2470-0010 (Print) 2470-0029 (Online)

Demir, Simge (2021) Idemix based anonymization for home automation systems. [Thesis]

Diba, Milad (2021) Design of a programmable low-noise and low-power readout channel for solid-state detectors. [Thesis]

Dikyol, Caner and Altunbek, Mine and Koç, Bahattin (2021) Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues. Bioprinting, 24 . ISSN 2405-8866 Published Online First

Dörtkaşlı, Kerem (2021) Thermal finite element model to compute melt pool dimensions for directed energy deposition additive manufacturing process with experimental validation. [Thesis]

Duman, Ece Naz and Taş, Duygu and Çatay, Bülent (2021) Branch-and-price-and-cut methods for the electric vehicle routing problem with time windows. International Journal of Production Research . ISSN 0020-7543 (Print) 1366–588X (Online) Published Online First


Ebadi, Malek (2021) Personalized screening policies for cervical cancer prevention. [Thesis]

Egil, Abdurrahim Can (2021) Design and synthesis of stimuli responsive polymeric nanostructures for drug delivery applications. [Thesis]

Ekmen, Erhan (2021) Discovery of amino acid compositions and motifs responsible for topological transitions in protein complexes. [Thesis]

Ene, Viviana and Herzog, Jürgen and Asloob Qureshi, Ayesha and Romeo, Francesco (2021) Regularity and the Gorenstein property of L-convex polyominoes. Electronic Journal of Combinatorics, 28 (1). ISSN 1077-8926

Eren, Guncem Ozgun and Sadeghi, Sadra and Bahmani Jalali, Houman and Ritter, Maximilian and Han, Mertcan and Baylam, Isinsu and Melikov, Rustamzhon and Onal, Asim and Oz, Fatma and Sahin, Mehmet and Ow-Yang, Cleva W. and Sennaroglu, Alphan and Lechner, Rainer and Nizamoglu, Sedat (2021) Cadmium-free and efficient type-II InP/ZnO/ZnS quantum dots and their application for LEDs. ACS Applied Materials & Interfaces, 13 (27). pp. 32022-32030. ISSN 1944-8244 (Print) 1944-8252 (Online)

Eroğlu, Emrah (2021) Multiparametric imaging approaches to dissect the role of ROS and eNOS signaling pathways using chemogenetic tools and genetically encoded biosensors. In: 45th FEBS Congress, Molecules of Life: Towards New Horizons, Ljubljana, Slovenia

Eroğlu, Günet and Teber, Serap and Ertürk, Kardelen and Kırmızı, Meltem and Ekici, Barış and Arman, Fehim and Balcısoy, Selim and Özcan, Yusuf Ziya and Çetin, Müjdat (2021) A mobile app that uses neurofeedback and multi-sensory learning methods improves reading abilities in dyslexia: a pilot study. Applied Neuropsychology: Child . ISSN 2162-2965 (Print) 2162-2973 (Online) Published Online First

Erol, Lütfi Yiğit and Uzun, Abdulkadir and Seyyedesfahlan, Mirmehdi and Tekin, İbrahim (2021) Broadband full-duplex antenna for IEEE 802.11 protocols. IEEE Antennas and Wireless Propagation Letters . ISSN 1536-1225 (Print) 1548-5757 (Online) Published Online First

Ertan, Ünal (2021) On the torque reversals of accreting neutron stars. Monthly Notices of the Royal Astronomical Society, 500 (3). pp. 2928-2936. ISSN 0035-8711 (Print) 1365-2966 (Online)

Ertan, Ünal and Alpar, M. Ali (2021) The minimum rotation period of millisecond pulsars. Monthly Notices of the Royal Astronomical Society: Letters, 505 (1). L112-L114. ISSN 1745-3925 (Print) 1745-3933 (Online)


Fındık, Yasin and Boz, Hasan Alp and Balcısoy, Selim (2021) Facilitating decision-making with multimodal interfaces in collaborative analytical sessions. In: Thalmann, Nadia Magnenat and Zhang, Jian Jun and Ramanathan, Manoj and Thalmann, Daniel, (eds.) Intelligent Scene Modeling and Human-Computer Interaction. Human–Computer Interaction Series. Springer, Switzerland, pp. 199-220. ISBN 978-3-030-71004-0 (Print) 978-3-030-71002-6 (Online)

Firouzmandi, Reza (2021) Fabrication and characterization of AI/AIOX/AI Josephson junctions for superconducting qubits. [Thesis]

Fuchs, Jacob and Barth, Michael and Gorini, Cosimo and Adagideli, İnanç and Richter, Klaus (2021) Crossed Andreev reflection in topological insulator nanowire T junctions. Physical Review B, 104 (8). ISSN 2469-9950 (Print) 2469-9969 (Online)


Genç, Ezgi (2021) Mathematical and statistical analysis of excitement score in penalty shootouts. [Thesis]

Gençali, Ali Arda and Ertan, Ünal (2021) On the long-term evolution of rotating radio transients. Monthly Notices of the Royal Astronomical Society, 500 (3). pp. 3281-3289. ISSN 0035-8711 (Print) 1365-2966 (Online)

Ghanem, Saleh Bader Saleh (2021) Determining which octopamine receptor links appetite and fluctuating trehalose levels in the honey bee. [Thesis]

Ghobadi Ulusoy, Gamze and Ghobadi, Amir and Demirtas, Merve and Buyuktemiz, Muhammed and Ozvural, Kubra and Akhuseyin, Elif and Erdem, Emre and Yaglioglu, Gül and Durgun, Engin and Ozbay, Ekmel and Karadas, Ferdi (2021) Building an iron chromophore incorporating prussian blue analogue for photoelectrochemical water oxidation. Chemistry - A European Journal (SI), 27 (35). pp. 8966-8976. ISSN 0947-6539 (Print) 1521-3765 (Online)

Girişken, Çağla (2021) Novel low shrinkage thermoplastic olefins with cool pigments additives: Desing, preparation and performance evaluation. [Thesis]

Göğebakan, Umut Barış (2021) High-Performance Dielectric Substrate Development with Low Dk and Df for RF and mm-wave Applications. [Thesis]

Göktürk, Gökhan (2021) Ultra-fast influence maximization with fused sampling and sketches. [Thesis]

Gönen, Emre Cemal (2021) Hybrid planning for free climbing robots: combining task and motion planning with dynamics and control. [Thesis]

Güçlü, Tandaç Fürkan (2021) Molecular level understanding of the functionality of PDZ3 variants via advanced all-atom simulations and dynamic residue network analyses. [Thesis]

Günay, Gülizar (2021) Geometric and combinatorial aspects of normal rational curves in PG(2,Q) and PG(3,Q). [Thesis]

Güney, Osman Berke and Koç, Emirhan and Aksoy, Can and Çatak, Yiğit and Arslan, Şuayb and Özkan, Hüseyin (2021) Adaptive boosting of DNN ensembles for brain-computer interface spellers. In: 2021 29th Signal Processing and Communications Applications Conference (SIU), Istanbul, Turkey

Gürel, Derya Berkin (2021) Design and prototyping of sub-millimeter-period undulators for free electron laser. [Thesis]

Gürkan, Mert (2021) Leveraging innovative data sources for analysis of migration patterns. [Thesis]


Habibian, Anahita and Sohouli, Abdolrasoul and Kefal, Adnan and Nadler, Ben and Yıldız, Mehmet and Suleman, Afzal (2021) Multi-material topology optimization of structures with discontinuities using peridynamics. Composite Structures, 258 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Hacisuleyman, Aysima and Erkip, Albert and Erman, Batu and Erman, Burak (2021) Synchronous and asynchronous response in dynamically perturbed proteins. Journal of Physical Chemistry B, 125 (3). pp. 729-739. ISSN 1520-6106 (Print) 1520-5207 (Online)

Hamed, Salimkhani and Erdem, Emre and Alkan Gürsel, Selmiye and Yürüm, Alp (2021) Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity. Journal of the American Ceramic Society, 104 (8). pp. 4257-4271. ISSN 0002-7820 (Print) 1551-2916 (Online)

Hashimoto, Tetsuya and Goto, Tomotsugu and Lu, Ting-Yi and On, Alvina Y. L. and Santos, Daryl Joe D. and Kim, Seong Jin and Kilerci Eser, Ece and Ho, Simon C-C. and Hsiao, Tiger Y-Y. and Lin, Leo Y-W. (2021) Revealing the cosmic reionization history with fast radio bursts in the era of square kilometre array. Monthly Notices of the Royal Astronomical Society, 502 (2). pp. 2346-2355. ISSN 0035-8711 (Print) 1365-2966 (Online)

Haşim, Kazım Ahmet and Kefal, Adnan (2021) Isogeometric static analysis of laminated plates with curvilinear fibers based on refined zigzag theory. Composite Structures, 256 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Hesam Sadati, Mir Ehsan and Çatay, Bülent and Aksen, Deniz (2021) An efficient variable neighborhood search with tabu shaking for a class of multi-depot vehicle routing problems. Computers and Operations Research, 133 . ISSN 0305-0548 (Print) 1873-765X (Online)

Hocaoğlu, Yarkın (2021) Fault Tolerant Control of a Quadrotor Helicopter. [Thesis]

Hürriyetoğlu, Ali and Tanev, Hristo and Zavarella, Vanni and Piskorski, Jakub and Yeniterzi, Reyyan and Yörük, Erdem and Mutlu, Osman and Yüret, Deniz and Villavicencio, Aline (2021) Challenges and Applications of Automated Extraction of Socio-political Events from Text (CASE 2021): Workshop and Shared Task Report. In: Challenges and Applications of Automated Extraction of Sociopolitical Events from Text (CASE 2021) Workshop, Association for Computational Linguistics (ACL), Virtual


Jafarpour, Mohammad (2021) Preparation of 2D Materials with Small Scale Multiphase Flows. [Thesis]

Jafarpour, Mohammad and Sheibani Aghdam, Araz and Koşar, Ali and Cebeci, Fevzi Çakmak and Ghorbani, Morteza (2021) Electrospinning of ternary composite of PMMA-PEG-SiO2 nanoparticles: comprehensive process optimization and electrospun properties. Materials Today Communications, 29 . ISSN 2352-4928

Jafarpour, Mohammad and Sheibani Aghdam, Araz and Talebian Gevari, Moein and Koşar, Ali and Bayazıt, Mustafa Kemal and Ghorbani, Morteza (2021) An ecologically friendly process for graphene exfoliation based on the "hydrodynamic cavitation on a chip" concept. RSC Advances, 11 (29). pp. 17965-17975. ISSN 2046-2069 (Print) 2046-2069 (Online)

Jamshidi, Hamid (2021) Analytical modeling of grinding process for improved productivity, part quality and material properties. [Thesis]

Jamshidi, Hamid and Budak, Erhan (2021) A 3D analytical thermal model in grinding considering a periodic heat source under dry and wet conditions. Journal of Materials Processing Technology, 295 . ISSN 0924-0136 (Print) 1873-4774 (Online)

Jamshidi, Hamid and Budak, Erhan (2021) On the prediction of surface burn and its thickness in grinding processes. CIRP Annals - Manufacturing Technology . ISSN 0007-8506 (Print) 1726-0604 (Online) Published Online First


Karakaş, Bahriye and Başağa, Hüveyda (2021) Mitochondrial estrogen receptors alter mitochondrial priming and response to endocrine therapy in breast cancer cells. Cell Death Discover, 7 (1). ISSN 2058-7716 (Online)

Karakaş, Bahriye and Başağa, Hüveyda and Gül, Özgür and Kütük, Özgür (2021) Kinome-wide RNAi screening for mediators of ABT-199 resistance in breast cancer cells identifies Wee1 as a novel therapeutic target. International Journal of Biochemistry and Cell Biology, 137 . ISSN 1357-2725 (Print) 1878-5875 (Online)

Karataş, Gamze and Özsahin, Orkun and Ozguven, Nevzat and Budak, Erhan (2021) Design optimization of tool holder extension for enhanced chatter stability by using component mode tuning method. In: 9th CIRP Conference on High Performance Cutting, Sheffield, UK

Karatum, Onuralp and Eren, Guncem Ozgun and Melikov, Rustamzhon and Onal, Asim and Ow-Yang, Cleva W. and Sahin, Mehmet and Nizamoglu, Sedat (2021) Quantum dot and electron acceptor nano-heterojunction for photo-induced capacitive charge-transfer. Scientific Reports, 11 (1). ISSN 2045-2322

Kaya, Erdem and Alpan, Eray and Balcısoy, Selim and Bozkaya, Burçin (2021) Quantifying insurance agency channel dynamics using premium sales big data and external factors. Big Data, 9 (2). pp. 116-131. ISSN 2167-6461 (Print) 2167-647X (Online)

Kefal, Adnan and Emami Tabrizi, Isa and Tansan, Murat and Kısa, Erdal and Yıldız, Mehmet (2021) An experimental implementation of inverse finite element method for real-time shape and strain sensing of composite and sandwich structures. Composite Structures, 258 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet (2021) Real-time monitoring of crack propagation in fiber-reinforced composite plates using iFEM methodology. In: 8th International Conference on Marine Structures (MARSTRUCT), Trondheim, Norway

Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet and Tessler, Alexander (2021) A smoothed iFEM approach for efficient shape-sensing applications: numerical and experimental validation on composite structures. Mechanical Systems and Signal Processing, 152 . ISSN 0888-3270 (Print) 1096-1216 (Online)

Kefal, Adnan and Tessler, Alexander (2021) Delamination damage identification in composite shell structures based on inverse finite element method and refined zigzag theory. In: 8th International Conference on Marine Structures (MARSTRUCT), Trondheim, Norway

Kesim, Hale (2021) Investigation of molecular mechanisms of lipid droplets catabolic pathways and their interactions in ichthyosis disease. [Thesis]

Keskin, Özge (2021) Comparative studies of astrophysical gamma-ray events detected with FERMI/GBM. [Thesis]

Keskin Özel, Merve and Çatay, Bülent and Laporte, Gilbert (2021) A simulation-based heuristic for the electric vehicle routing problem with time windows and stochastic waiting times at recharging stations. Computers and Operations Research, 125 . ISSN 0305-0548 (Print) 1873-765X (Online)

Khalili Sadaghiani, Abdolali (2021) Numerical and experimental studies on flow condensation in hydrophilic microtubes. Applied Thermal Engineering, 197 . ISSN 1359-4311 (Print) 1873-5606 (Online) Published Online First

Khalilian Motamed Bonab, Ali (2021) Simulation Based Optimal Design of Exoskeletons to Reduce Metabolic Cost and Improve Energy Efficiency. [Thesis]

Khan, Raja Muhammad Awais (2021) Failure investigation of composite materials using multi-instrument experimental techniques and numerical method. [Thesis]

Khandar Shahabad, Peiman (2021) Vibration analysis of composite laminated shells using 2D spectral Chebyshev method and lamination parameters. [Thesis]

Khandar Shahabad, Peiman and Rafiei Anamagh, Mirmeysam and Bediz, Bekir (2021) Buckling analysis of laminated composite panels using 2D spectral Chebyshev and lamination parameters. In: 24th International Conference on Composite Structures (ICCS24), Porto, Portugal

Kılıç, Altan Berdan (2021) The geometric representations of rank-metric codes. [Thesis]

Kjamilji, Artrim (2021) Blockchain driven secure and private machine learning algorithms for post-quantum 5G/6G enabled industrial IOT with applications to cyber-security and health. [Thesis]

Koç, Bahattin and Acar, Anıl Ahmet and Fallah, Ali and Daskalakis, Evangelos and Xu, Zhanyan and Omar, Abdalla M. and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Bartolo, Paulo (2021) Designing novel synthetic grafts for large bone defects: experimental and numerical studies. In: Kyratsis, Panagiotis and Davim, J. Paulo, (eds.) Experiments and simulations in advanced manufacturing. Springer, Cham, Switzerland, pp. 71-89. ISBN 978-3-030-69471-5 (print), 978-3-030-69472-2 (online)

Koç, Bahattin and Akdeniz Skvortsov, Gözde and Altunbek, Mine and Afghah, Seyedeh Ferdows and Khani, Navid (2021) 3D Bioprinting of molecularly engineered PEG-based hydrogels utilizing gelatin fragments. Biofabrication, 13 (4). ISSN 1758-5082 (Print) 1758-5090 (Online)

Koç, Bahattin and Fallah, Ali and Zarrabi, Ali and Afghah, Seyedeh Ferdows (2021) Effect of zinc-doped hydroxyapatite/graphene nanocomposite on the physicochemical properties and osteogenesis differentiation of 3D-printed polycaprolactone scaffolds for bone tissue engineering. Chemical Engineering Journal, 426 . ISSN 1385-8947 (Print) 1873-3212 (Online) Published Online First

Kolukısa, Deniz Can and Özbulut, Murat and Yıldız, Mehmet (2021) The effect of iterative procedures on the robustness and fidelity of augmented lagrangian SPH. Symmetry, 13 (3). ISSN 2073-8994

Korkmaz, Ömer and Yılmaz, Cemal (2021) SYSMODIS: a systematic model discovery approach. In: International Workshop on Combinatorial Testing, Virtual

Köksalan, Güniz Irmak (2021) Multi-mode capacitated lot sizing problem with periodic carbon emission constraints. [Thesis]

Küçüksarı, Zeynep (2021) Dynamic hedonic and utilitarian segmentation based on individual customer purchase patterns. [Thesis]


Lahe, Peyman and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Başdoğan, İpek (2021) Electromechanical analysis of functionally graded panels with surface-integrated piezo-patches for optimal energy harvesting. Composite Structures, 263 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Lahe Mothlag, Peyman and Kefal, Adnan (2021) Comparative study of peridynamics and finite element method for practical modeling of cracks in topology optimization. Symmetry, 13 (8). ISSN 2073-8994

Lotfan, Saeed and Biglari, Hasan and Choupani, Andisheh and Bediz, Bekir (2021) Dynamics of carbon nanotubes under thermally induced nanoparticle transport on helical tracks. Applied Mathematical Modelling, 93 . pp. 684-707. ISSN 0307-904X (Print) 1872-8480 (Online)

Lotfan, Saeed and Rafiei Anamagh, Mirmeysam and Bediz, Bekir (2021) A general higher-order model for vibration analysis of axially moving doubly-curved panels/shells. Thin-Walled Structures, 164 . ISSN 0263-8231 (Print) 1879-3223 (Online)


Mahdavi, Hossein and Azgın, Hasan and Hamzaoğlu, İlker (2021) Approximate versatile video coding fractional interpolation filters and their hardware implementations. IEEE Transactions on Consumer Electronics . ISSN 0098-3063 (Print) 1558-4127 (Online) Published Online First

Marques, Ricardo and Rodrigues, Francisco and Emami Tabrizi, Isa and Kefal, Adnan and Ali, Hafiz Qasim and Yıldız, Mehmet and Suleman, Afzal (2021) Probabilistic approach for thermoelastic signal source identification in carbon fiber/epoxy composite materials using digital image correlation. In: 24th International Conference on Composite Structures (ICCS24), Porto, Portugal

Massarwa, Eyass and Emami Tabrizi, Isa and Yıldız, Mehmet (2021) Mechanical behavior and failure of glass/carbon fiber hybrid composites: multiscale computational predictions validated by experiments. Composite Structures, 260 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Menceloğlu, Yeşim (2021) Synthesis and swelling-release behavior of superabsorbent nanocomposites. [Thesis]

Mengilli, Uğur (2021) Coupled stability and performance of interaction control through series viscoelastic actuation. [Thesis]

Mengilli, Uğur and Orhan, Zeynep Özge and Çalışkan, Umut and Patoğlu, Volkan (2021) Passivity of series damped elastic actuation under velocity-sourced impedance control. In: IEEE WorldHaptics 2021, Online (Montreal, QC, Canada)

Mercan, Hanefi (2021) Unified combinatorial interaction testing. [Thesis]

Mercan, Hanefi and Yilmaz, Cemal (2021) Computing sequence covering arrays using unified combinatorial interaction testing. In: International Workshop on Combinatorial Testing, Virtual

Mert, Ahmet Can (2021) Efficient hardware implementations for lattice-based cryptography primitives. [Thesis]

Mısırlıoğlu, Burç and Aldulaimi, Wael and Şendur, Kürşat and Akaoğlu, Can and Okatan, Mahmut Barış (2021) Chirality switching in ferromagnetic nanostructures via nanosecond electric pulses. Annalen der Physik . ISSN 0003-3804 (Print) 1521-3889 (Online)

Mohammadmoradi, Omid and Celik, Umit and Mısırlıoğlu, Burç and İnce, Gözde (2021) Vapor phase synthesis of ferroelectric microislands on PVDF thin films. Nanotechnology, 32 (43). ISSN 0957-4484 (Print) 1361-6528 (Online)

Mohammadpour Chehrghani, Mirvahid (2021) Phase Change Heat Transfer Enhancement Using Engineered Surfaces. [Thesis]

Mohammadpour Chehrghani, Mirvahid and Abbasiasl, Taher and Sadaghiani, Abdolali Khalili and Koşar, Ali (2021) Copper-based superhydrophobic nanostructures for heat transfer in flow condensation. ACS Applied Nano Materials, 4 (2). pp. 1719-1732. ISSN 2574-0970

Motlagh, Peyman Lahe and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Başdoğan, İpek (2021) A spectral Tchebychev solution for electrostatic analysis of functionally graded composite plates with integrated piezo-patches. In: 7th International Conference on Mechanics of Composites (MECHCOMP7), Porto, Portugal

Mousavi Gargari, Seyyed Saber (2021) Effects of regret in supply chain decisions: An experimental study. [Thesis]


Nabi, Afshan (2021) Discovering coding LNCRNAS using deep learning training dynamics. [Thesis]

Niazi, Soroush (2021) Porous and rough micro/nano structures for enhancing the performance of phase change cooling systems. [Thesis]

Niazi, Soroush and Khalili Sadaghiani, Abdolali and Gharıb, Ghazaleh and Kaya, Veysel Ogulcan and Çelik, Süleyman and Kutlu, Özlem and Koşar, Ali (2021) Bio-coated surfaces with micro-roughness and micro-porosity: Next generation coatings for enhanced energy efficiency. Energy, 222 . ISSN 0360-5442 (Print) 1873-6785 (Online)

Nouman, Ahmed and Patoğlu, Volkan and Erdem, Esra (2021) Hybrid conditional planning for robotic applications. International Journal of Robotics Research, 40 (2-3). pp. 594-623. ISSN 0278-3649 (Print) 1741-3176 (Online)


Orman, Günce Keziban and Türe, Nadir and Balcısoy, Selim and Boz, Hasan Alp (2021) Finding proper time intervals for dynamic network extraction. Journal of Statistical Mechanics: Theory and Experiment, 2021 (3). ISSN 1742-5468

Osman, Usamah Yaaseen Haji Alimohamed (2021) Bayesian reinforcement learning with mcmc to maximize energy output in hardware-in-the-loop simulations of vertical axis wind turbine. [Thesis]

Otaran, Ata and Tokatlı, Ozan and Patoğlu, Volkan (2021) Physical human-robot interaction using handsOn-SEA: an educational robotic platform with series elastic actuation. IEEE Transactions on Haptics . ISSN 1939-1412 (Print) 2329-4051 (Online) Published Online First

Oztolan-Erol, Nihal and Helmstetter, Andrew J. and İnan, Asuman and Buggs, Richard J.A. and Lucas, Stuart J. (2021) Unraveling genetic diversity amongst european hazelnut (corylus avellana l.) varieties in Turkey. Frontiers in Plant Science, 12 . ISSN 1664-462X (Print) 1664-462X (Online)


Pagano, Giovanni and Pallardó, Federico V. and Lyakhovich, Alex and Tiano, Luca and Trifuoggi, Marco (2021) Mitigating the pro-oxidant state and melanogenesis of Retinitis pigmentosa: by counteracting mitochondrial dysfunction. Cellular and Molecular Life Sciences, 78 (23). pp. 7491-7503. ISSN 1420-682X (Print) 1420-9071 (Online)

Parlar, Ayhan (2021) Characterization of structural and functional properties of anti-VEGF-IgG molecules under certain environmental stress conditions. [Thesis]

Pehlivan, Ahmet Selim and Akşit, Mahmut Faruk and Erbatur, Kemalettin (2021) Fatigue analysis design approach, manufacturing and implementation of a 500 kW wind turbine main load frame. Energies, 14 (12). ISSN 1996-1073

Pirouzfam, Niloufar and Şendur, Kürşat (2021) Tungsten based spectrally selective absorbers with anisotropic rough surface texture. Nanomaterials, 11 (8). ISSN 2079-4991

Pishva, Parsa (2021) A novel Staphylococcus aureus-modified electrochemical biosensor for determination of heavy metals. [Thesis]


Rafiei Anamagh, Mirmeysam (2021) Development of a new spectral modeling approach to investigate the dynamic and buckling behavior of composite structures. [Thesis]

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2021) An improved ordinary-state based peridynamic formulation for modeling FGMs with sharp interface transitions. International Journal of Mechanical Sciences, 197 . ISSN 0020-7403 (Print) 1879-2162 (Online)

Rahimzadeh Berenji, Kaveh and Ozsahin, Orkun and Budak, Erhan (2021) Effect of spindle design on spindle dynamics and chatter stability. In: International Symposium on Precision Engineering and Sustainable Manufacturing PRESM2021, Jeju, South Korea

Rastani, Sina and Çatay, Bülent (2021) A large neighborhood search-based matheuristic for the load-dependent electric vehicle routing problem with time windows. Annals of Operations Research . ISSN 0254-5330 (Print) 1572-9338 (Online) Published Online First

Rehman, Raheela and Asif, Muhammad and Çakmak, İsmail and Öztürk, Levent (2021) Differences in uptake and translocation of foliar‐applied Zn in maize and wheat. Plant and soil, 462 (1-2). pp. 235-244. ISSN 0032-079X (Print) 1573-5036 (Online)


Sadatizamanabad, Mirehsan Hesam and Çatay, Bülent (2021) A hybrid variable neighborhood search approach for the multi-depot green vehicle routing problem. Transportation Research Part E: Logistics and Transportation Review, 149 . ISSN 1366-5545 (Print) 1878-5794 (Online)

Saeed, Akhtar (2021) Terahertz-band communications at various atmospheric altitudes. [Thesis]

Saeed, Akhtar and Saleem, Ammar and Gürbüz, Özgür and Akkaş, Mustafa Alper (2021) Characterization of terahertz band transmittance from sea-level to drone altitudes. In: International Balkan Conference on Communications and Networking (BalkanCom), Novi Sad, Serbia

Saghatchi, Roozbeh and Özbulut, Murat and Yıldız, Mehmet (2021) Dynamics of double emulsion interfaces under the combined effects of electric field and shear flow. Computational Mechanics, 68 (4). pp. 775-793. ISSN 0178-7675 (Print) 1432-0924 (Online)

Saleh, Heba Ahmed Hamed Shaker and Bajwa, Rayan and Tekin, İbrahim and Yapıcı, Murat Kaya (2021) Design and optimization of cantilever based RF-MEMS shunt switch for 5G applications. In: 16th International Conference on Design & Technology of Integrated Systems in Nanoscale Era (DTIS), Montpellier, France

Santos, Daryl Joe D. and Goto, Tomotsugu and Kim, Seong Jin and Wang, Ting-Wen and Ho, Simon C-C and Hashimoto, Tetsuya and Huang, Ting-Chi and Lu, Ting-Yi and On, Alvina Y. L. and Wong, Yi-Hang Valerie and Hsiao, Tiger Yu-Yang and Pollo, Agnieszka and Malkan, Matthew A. and Miyaji, Takamitsu and Toba, Yoshiki and Kilerci Eser, Ece and Hwang, Ho Seong and Jeong, Woong-Seob and Shim, Hyunjin and Pearson, Chris and Poliszczuk, Artem and Chen, Bo Han and Mack, Katarzyna (2021) Environmental effects on AGN activity via extinction-free mid-infrared census. Monthly Notices of the Royal Astronomical Society, 507 (2). pp. 3070-3088. ISSN 0035-8711 (Print) 1365-2966 (Online)

Santos Pires, JP and Amorim, B and Ferreira, A and Adagideli, İnanç and Mucciolo, E.R. and Viana Parente Lopes, JM (2021) Breakdown of universality in three-dimensional Dirac semimetals with random impurities. Physical Review Research, 3 (1). ISSN 2643-1564 (Online)

Sarabi, Misagh Rezapour and Bediz, Bekir and Falo, Louis D. and Korkmaz, Emrullah and Tasoğlu, Savaş (2021) 3D printing of microneedle arrays: challenges towards clinical translation. Journal of 3D Printing in Medicine, 5 (2). pp. 65-70. ISSN 2059-4755 (Print) 2059-4763 (Online)

Sarıkaya, Sinem (2021) Investigation of links and crosstalk between autophagy and DNA damage responses. [Thesis]

Sayar Irani, Farid and Yapıcı, Murat Kaya (2021) Elastomeric stamp-assisted exfoliation and transfer of patterned graphene layers. In: IEEE 21st International Conference on Nanotechnology (NANO), Montreal, QC, Canada

Sermet, Barış (2021) Detection and remediation of Turkish phishing websites. [Thesis]

Seyednourani, Mahsa and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2021) A two-stage optimization methodology for gate and vent locations and distribution media layout for liquid composite molding process. Composites Part A: Applied Science and Manufacturing, 149 . ISSN 1359835X (Print) 1878-5840 (Online) Published Online First

Seyyed Monfared Zanjani, Jamal and Yousefi Louyeh, Pouya and Emami Tabrizi, Isa and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2021) Thermo-responsive and shape-morphing CF/GF composite skin: full-field experimental measurement, theoretical prediction, and finite element analysis. Thin-Walled Structures, 160 . ISSN 0263-8231 (Print) 1879-3223 (Online)

Shojaeian, Milad (2021) Self-assembly microfabrication of multilayered helical nanomembrane and its application as microswimming robots. [Thesis]

Sümbül Boztaş, Ayşe Nur (2021) Cure cycle determination of neat and nano-reinforced carbon/epoxy composites used in aerospace applications through investigation of cure kinetics by differentaial scanning calorimetry and rheometer. [Thesis]


Tajeddin, Alireza and Mustafaoğlu, Nur (2021) Design and fabrication of organ-on-chips: promises and challenges. Micromachines, 12 (12). ISSN 2072-666X

Tajeddin, Alireza and Mustafaoğlu, Nur and Yapıcı, Murat Kaya (2021) On-chip measurement of pH using a microcantilever: a biomimetic design approach. In: Symposium on Design, Test, Integration & Packaging of MEMS and MOEMS (DTIP), Paris, France

Tanoumand, Neda and Ünlüyurt, Tonguç (2021) An exact algorithm for the resource constrained home health care vehicle routing problem. Annals of Operations Research, 304 (1-2). pp. 397-425. ISSN 0254-5330 (Print) 1572-9338 (Online)

Taş, Cüneyt Erdinç (2021) Hybrid polymeric materials comprising clay nanotubes, photothermal agents and phase change materials for food, water and energy applications. [Thesis]

Taş, Cüneyt Erdinç and Berksun, Ekin and Köken, Deniz and Ünal, Serkan and Ünal, Hayriye (2021) Photothermal waterborne polydopamine/polyurethanes with light-to-heat conversion properties. ACS Applied Polymer Materials, 3 (8). pp. 3929-3940. ISSN 2637-6105

Taş, Cüneyt Erdinç and Ünal, Hayriye (2021) Thermally buffering polyethylene/halloysite/phase change material nanocomposite packaging films for cold storage of foods. Journal of Food Engineering, 292 . ISSN 0260-8774 (Print) 1873-5770 (Online)

Taşpınar, Rabia (2021) Discretization based solution approaches for the circle packing problem. [Thesis]

Tehranizadeh, Faraz (2021) Design and optimization of end mills with special geometries for high productivity and their use in different applications. [Thesis]

Tezer, Vatan Aksoy (2021) Automated test case generation for self-driving cars using CCTV videos. [Thesis]

Ti, Chaoyang and Ari, Atakan and Karakan, Çağatay and Yanık, Cenk and Kaya, İsmet İnönü and Hanay, Selim and Svitelskiy, Oleksiy and González, Miguel and Seren, Huseyin and Ekinci, Kamil (2021) Frequency-dependent piezoresistive effect in top-down fabricated gold nanoresistors. Nano Letters, 21 (15). pp. 6533-6539. ISSN 1530-6984 (Print) 1530-6992 (Online)

Tiger Yu-Yang, Hsiao and Tomotsugu, Goto and Tetsuya, Hashimoto and Daryl Joe D., Santos and Alvina Y. L., On and Kilerci Eser, Ece and Yi Hang Valerie, Wong and Seong Jin, Kim and Cossas K-W, Wu and Simon C-C, Ho and Ting-Yi, Lu (2021) A Dyson sphere around a black hole. Monthly Notices of the Royal Astronomical Society, 506 (2). pp. 1723-1732. ISSN 0035-8711 (Print) 1365-2966 (Online)

Tuncer, Deniz (2021) Misocp-based solution approaches to the unit commitment problem with AC power flows. [Thesis]


Ulutaş, Tuğçe (2021) Concatenated codes, matrix-product codes and their schur product. [Thesis]

Uyar, Murat (2021) Rational preperiodic points of cubic post-critically finite polynomials. [Thesis]


Yağlıoğlu, Berk (2021) Computing matrix permanents and counting perfect matchings on GPUS. [Thesis]

Yang, Deheng and Liu, Kui and Kim, Dongsun and Koyuncu, Anıl and Kim, Kisub and Tian, Haoye and Lei, Yan and Mao, Xiaoguang and Klein, Jacques and Bissyandé, Tegawendé F. (2021) Where were the repair ingredients for Defects4j bugs? Exploring the impact of repair ingredient retrieval on the performance of 24 program repair systems. Empirical Software Engineering, 26 (6). ISSN 1382-3256 (Print) 1573-7616 (Online)

Yazıcı, Mustafa Atilla and Asif, Muhammad and Tutuş, Yusuf and Ortas, Ibrahim and Lambers, Hans and Öztürk, Levent and Çakmak, İsmail (2021) Reduced root mycorrhizal colonization as affected by phosphorus fertilization is responsible for high cadmium accumulation in wheat. Plant and Soil . ISSN 0032-079X (Print) 1573-5036 (Online) Published Online First

Yılan, Mikail and Gürbüz, Özgür and Özkan, Hüseyin (2021) Integrated linear and nonlinear digital cancellation for full duplex communication. IEEE Wireless Communications, 28 (1). pp. 20-27. ISSN 1536-1284 (Print) 1558-0687 (Online)

Yıldırım, Sinan and Kurutmaz, M. Burak and Barsbey, Melih and Şimşekli, Umut and Cemgil, A. Taylan (2021) Bayesian allocation model: marginal likelihood-based model selection for count tensors. IEEE Journal of Selected Topics in Signal Processing, 15 (3). pp. 560-573. ISSN 1932-4553 (Print) 1941-0484 (Online)

Yılmaz, Cemal (2021) The software aspect of preserving digital arts. In: Artut, Selçuk and Karaman, Osman Serhat and Yılmaz, Cemal, (eds.) Technological arts preservation. Sabancı University Sakıp Sabancı Museum (SSM), Istanbul, Turkey, pp. 102-115. ISBN 978-625-7329-16-3

Yılmaz, Emir Alaattin (2021) Recommendation System by Link Prediction Approach on Transactional Data. [Thesis]

Yolcu, Seher and Alavilli, Hemasundar and Ganesh, Pushpalatha and Panigrahy, Madhusmita and Song, Kihwan (2021) Salt and drought stress responses in cultivated beets (Beta vulgaris L.) and wild beet (Beta maritima L.). Plants-Basel, 10 (9). ISSN 2223-7747

Yurdakul, Nihal (2021) On exceptional almost perfect non-linear functions. [Thesis]

Yüksel, Esra and Budak, Erhan and Özlü, Emre and Oral, Ahmet and İğrek, Fatih and Tosun, Fulya (2021) Prediction of thermal growth in a high-speed spindle by considering thermo-mechanical behavior. In: 2nd International Conference on Thermal Issues in Machine Tools, Prague, Czech Republic


Zafar, Farjad (2021) Vision based localization and control of UGVs using a UAV. [Thesis]


Çelebi, Gizem and Özçelik, Elif and Vardar, Emre and Demir, Durmuş Ali (2021) Time delay during the proton tunneling in the base pairs of the DNA double helix. Progress in Biophysics and Molecular Biology . ISSN 0079-6107 (Print) 1873-1732 (Online) Published Online First

Çetin, Beril (2021) Parameter selection approach and optimization in abrasive water jet machining. [Thesis]

Çimdiker, İlim İrfan (2021) Constraints from inflation and black-holes on emergent gravity theories. [Thesis]

Çimdiker, İrfan and Demir, Durmuş Ali and Övgün, Ali (2021) Black hole shadow in symmergent gravity. Physics of the Dark Universe, 34 . ISSN 2212-6864

Çokluk, Zeynep (2021) Manipulating and visualizing the energy metabolism in single cells using chemogenetic tools and genetically encoded biosensors. [Thesis]

Çoruhlu, Gökay (2021) Explainable robotic plan execution monitoring under partial observability. [Thesis]


Ömrüuzun Seyrek, Halime (2021) Construction of evidently positive series and an alternative construction for a family of partition generating functions deu to Kanade and Russell. [Thesis]

Örs, Faik Kerem (2021) Data driven intrusion detection for 6LoWPAN based IoT systems. [Thesis]

Özbaygın, Gizem and Koca, Esra and Yaman, Hande (2021) An exact solution approach for the inventory routing problem with time windows. Computers and Operations Research, 134 . ISSN 0305-0548 (Print) 1873-765X (Online)

Özbaygın, Gizem and Koca, Esra and Yaman, Hande (2021) (18 February 2021) An exact solution approach for the inventory routing problem with time windows. [Dataset]

Özcan, Yiğit and Tunç, Lütfi Taner and Kopacka, Jan and Çetin, Beril and Sulitka, Matej (2021) Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces. International Journal of Advanced Manufacturing Technology . ISSN 0268-3768 (Print) 1433-3015 (Online) Published Online First

Özçelik, Necdet (2021) Preparation and incorporation of multi-functional carbon nano materials into fiber reinforced polymeric composites. [Thesis]

Özdemir, Anıl (2021) Data driven exploration of document collection to understand underlying social fabric using graph representation learning. [Thesis]

Özerk, Özgün (2021) Winpen: A fast clustering approach for black-box penetration testing. [Thesis]

Özerk, Özgün and Elgezen, Can and Mert, Ahmet Can and Öztürk, Erdinç and Savaş, Erkay (2021) Efficient number theoretic transform implementation on GPU for homomorphic encryption. The Journal of Supercomputing . ISSN 0920-8542 (Print) 1573-0484 (Online) Published Online First

Özkan, Hüseyin and Temelli, Recep and Gürbüz, Özgür and Köksal, Oğuz Kaan and İpekören, Ahmet Kaan and Canbal, Furkan and Karahan, Baran Deniz and Kuran, Mehmet Şükrü (2021) Multimedia traffic classification with mixture of Markov components. Ad Hoc Networks, 121 . ISSN 1570-8705 (Print) 1570-8713 (Online) Published Online First

Özsaygın, Oğuz (2021) Applications of unified combinatorial interaction testing. [Thesis]

Öztürk, Ülkü and Boz, Hasan Alp and Balcısoy, Selim (2021) Visual analytic based ship collision probability modeling for ship navigation safety. Expert Systems with Applications, 175 . ISSN 0957-4174 (Print) 1873-6793 (Online)


İnan, Asuman (2021) In silico analysis of the food allergy-related pathways and the potential role of dietary mirnas. [Thesis]


Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü (2021) Initial study towards the integrated design of bone scaffolds based on cell diffusion, growth factor release and tissue regeneration. In: International Mechanical Engineering Congress & Exposition, Virtual Conference

Şengül, Esra (2021) Understanding cancer and immune cell heterogeneity using microfluidics, dielectrophoresis, and conventional methods. [Thesis]

Şengül Tezel, Yasemin (2021) Nonlinear viscoelasticity of strain rate type: an overview. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2245). ISSN 1364-5021 (Print) 1471-2946 (Online)

Şengül Tezel, Yasemin (2021) Viscoelasticity with limiting strain. Discrete and Continuous Dynamical Systems - Series S (SI), 14 (1). pp. 57-70. ISSN 1937-1632 (Print) 1937-1179 (Online)

Şimşek, Şevval (2021) Privacy preserving identification in home automation systems. [Thesis]

Şimşek, Uğur and Gayir, Cemal Efe and Parlayan, Onur and Kızıltaş, Güllü (2021) Design of graded TPMS with performance preserving density mapping strategy based on adjoint sensitivities. In: 4th International Conference on Building Materials and Materials Engineering (ICBMM 2020), Virtual Conference

This list was generated on Mon Jul 4 02:16:04 2022 +03.