Items where Division is "Faculty of Engineering and Natural Sciences" and Year is 2018

Budak, Erhan (2018) Special issue: chatter stability of machining processes. [Volumes Edited / Special Issues]

Abbasi, Sanaz (2018) Purification, size separation and ionic fnctionalization of halloysite nanotubes. [Thesis]

Abbasi, Shahbaz and Shafique, Atia and Ceylan, Ömer and Barıştıran Kaynak, Canan and Kaynak, Mehmet and Gürbüz, Yaşar (2018) A test platform for the noise characterization of SiGe microbolometer ROICs. IEEE Sensors Journal, 18 (15). pp. 6217-6223. ISSN 1530-437X (Print) 1558-1748 (Online)

Abbasi, Shahbaz and Shafique, Atia and Ceylan, Ömer and Yazıcı, Melik and Gürbüz, Yaşar (2018) A novel approach to noise shaping in digital pixels for infrared imagers using over-integration. In: IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy

Abbasi, Shahbaz and Shafique, Atia and Ceylan, Ömer and Yazıcı, Melik and Gürbüz, Yaşar (2018) A partially pixel-parallel DROIC for MWIR imagers with columnwise residue quantization. IEEE Transactions on Electron Devices, 65 (11). pp. 4916-4923. ISSN 0018-9383 (Print) 1557-9646 (Online)

Abd-Elmagid Ali, Mohamed Abd-Elaziz and Elbatt, Tamer and Seddik, Karim G. and Erçetin, Özgür (2018) Stable throughput of cooperative cognitive networks with energy harvesting: finite relay buffer and finite battery capacity. IEEE Transactions on Cognitive Communications and Networking, 4 (4). pp. 704-718. ISSN 2332-7731

Abd-Elmagid Ali, Mohamed Abd-Elaziz and Erçetin, Özgür and ElBatt, Tamer (2018) Cache-aided heterogeneous networks: coverage and delay analysis. In: IEEE 86th Vehicular Technology Conference (VTC-Fall), Toronto, ON, Canada

Abdolhosseinzadeh, Sina and Sadighikia, Sina and Alkan Gürsel, Selmiye (2018) Scalable synthesis of sub-nanosized platinum-reduced graphene oxide composite by an ultraprecise photocatalytic method. ACS Sustainable Chemistry and Engineering, 6 (3). pp. 3773-3782. ISSN 2168-0485

Acar, Gizem and Öztürk, Özberk and Yapıcı, Murat Kaya (2018) Wearable graphene nanotextile embedded smart armband for cardiac monitoring. In: 17th IEEE SENSORS Conference, New Delhi, India

Adatoz, E. Beruhil and Hendessi, Saman and Ow-Yang, Cleva W. and Demirel, A. Levent (2018) Restructuring of poly(2-ethyl-2-oxazoline)/tannic acid multilayers into fibers. Soft Matter, 14 (19). pp. 3849-3857. ISSN 1744-683X (Print) 1744-6848 (Online)

Afghah, R. and Özlük, Ö. and Ünlüyurt, Tonguç (2018) Capacity allocation and pricing policies for cloud computing service providers. In: 48th International Conference on Computers and Industrial Engineering, CIE 2018, Auckland

Ahmad, Faseeh and Erdem, Esra and Patoğlu, Volkan (2018) Revisiting robot construction problems as benchmarks for task and motion planning. In: RSS Workshop on Exhibition and Benchmarking of Task and Motion Planners, USA

Ahmad, Fiaz and Rasool, Akhtar and Özsoy, Emre and Rajasekar, S. and Şabanoviç, Asif and Elitaş, Meltem (2018) Distribution system state estimation-a step towards smart grid. Renewable and Sustainable Energy Reviews, 81 (Part 2). pp. 2659-2671. ISSN 1364-0321 (Print) 1879-0690 (Online)

Akbal, Onur and Alpar, M. Ali (2018) Minimum glitch of the Crab pulsar and the crustquake as a trigger mechanism. Monthly Notices of the Royal Astronomical Society, 473 (1). pp. 621-624. ISSN 0035-8711 (Print) 1365-2966 (Online)

Akçapınar, Kudret and Gürbüz, Özgür (2018) Full duplex-ing over two hops under full interference. In: Wireless Advanced (WiAd), London, UK

Akdeniz Skvortsov, Gözde and Piluso, Susanna and Altunbek, Mine and Khani, Navid and Oosterwyck, Hans Van and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin (2018) 3D bioprinting of cell-laden molecularly engineered PEG-based hydrogels. In: Biofabrication Conference 2018, Wurzberg, Germany

Akdoğan, Dilara and Karaoğlan Altop, Duygu and Eskandarian, Laleh and Levi, Albert (2018) Secure key agreement protocols: pure biometrics and cancelable biometrics. Computer Networks, 142 . pp. 33-48. ISSN 1389-1286 (Print) 1872-7069 (Online)

Akdoğan, Dilara and Karaoğlan Altop, Duygu and Levi, Albert (2018) On the use of ordered biometric features for secure key agreement. In: Second International Balkan Conference on Communications and Networking (BalkanCom 2018), Podgorica, Montenegro

Akdoğan, Ozan (2018) Synthesis of hard magnetic Mn3Ga micro-islands by e-beam evaporation. AIP Advances, 8 (5). ISSN 2158-3226

Akgönül, Sarp (2018) The effect of asymmetry on micromixing in curvilinear microchannels. [Thesis]

Akkoç, Yunus and Gözüaçık, Devrim (2018) Autophagy and liver cancer. Turkish Journal of Gastroenterology, 29 (3). pp. 270-282. ISSN 1300-4948 (Print) 2148-5607 (Online)

Akşehir, Yusuf and Erdayandı, Kamil and Özcan, Tevfik Zafer and Hamzaoğlu, İlker (2018) A low energy adaptive motion estimation hardware for H.264 multiview video coding. Journal of Real-Time Image Processing, 15 (1). pp. 3-12. ISSN 1861-8200 (Print) 1861-8219 (Online)

Aktaş, Büşra and Ow-Yang, Cleva W. and Sezen, Meltem and Büyükaksoy, Aligül (2018) La0.8Sr0.2MnO3 – Bi1.44Y0.56O3 thin film cathodes for solid oxide fuel cells. In: IV. International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress (SERES'18), Eskisehir, Turkey

Aktaş, Ethem Utku and Altunel, Haluk and Elalmış, Halil Ibrahim and Nişancı, Songül and Yılmaz, Cemal (2018) Endüstriyel bağlamda yazılım olay kaydı yönetim sürecinin iyileştirilmesi. In: 12. Ulusal Yazılım Mühendisliği Sempozyumu, Istanbul, Turkey (Accepted)

Aktaş, Ethem Utku and Altunel, Haluk and Elalmış, Halil İbrahim and Nişancı, Songül and Yılmaz, Cemal (2018) Improvement of software issue record management process in an industrial context (Endüstriyel bağlamda yazılım olay kaydı yönetim sürecinin iyileştirilmesi). In: 12th Turkish National Software Engineering Symposium, UYMS 2018, Istanbul, Turkey

Aktaş, Ethem Utku and Çalpur, Mehmet Çağrı and Yildirim, Umit Ulkem and Yıldırım, Emrah (2018) Inferring dependencies among web services with predictive and statistical analysis of system logs. In: 7th Turkish National Software Architecture Conference, UYMK 2018, Istanbul, Turkey

Aktaş, Metin and Özkan, Hüseyin (2018) Acoustic direction finding using single acoustic vector sensor under high reverberation. Digital Signal Processing, 75 . pp. 56-70. ISSN 1051-2004 (Print) 1095-4333 (Online)

Aktay, Öznur (2018) Identifying regulation of CANT1 during endoplasmic reticulum stress-induced cell death. [Thesis]

Al-Gebory, Layth and Mengüç, M. Pınar and Koşar, Ali and Şendur, Kürşat (2018) Effect of electrostatic stabilization on thermal radiation transfer in nanosuspensions: Photo-thermal energy conversion applications. Renewable Energy, 119 . pp. 625-640. ISSN 0960-1481 (Print) 1879-0682 (Online)

Alahmadi, Adel and Güneri, Cem and Shoaib, Hatoon and Sole, Patrick (2018) Long quasi-polycyclic t-CIS codes. Advances in Mathematics of Communications, 12 (1). pp. 189-198. ISSN 1930-5346 (Print) 1930-5338 (Online)

Alahmadi, Adel and Özdemir, Funda and Solé, Patrick (2018) On self-dual double circulant codes. Designs, Codes, and Cryptography, 86 (6). pp. 1257-1265. ISSN 0925-1022 (Print) 1573-7586 (Online)

Alcan, Gökhan and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem (2018) Diesel engine NOx emission modeling using a new experiment design and reduced set of regressors. In: Proceedings of 18th IFAC Symposium on System Identification (SYSID 2018), Stockholm, Sweden

Ali Ahmed, Sara Atito and Yanıkoğlu, Berrin (2018) Multi-label networks for face attributes classification. In: IEEE International Conference on Multimedia and Expo (ICME 2018) Workshop, San Diego, CA

Ali Ahmed, Sara Atito and Yanıkoğlu, Berrin and Aptoula, Erchan and Ganiyusufoğlu, İpek and Yıldız, Aras and Yıldırır, Kerem and Sevilmiş, Barış and Şen, Mehmet Umut (2018) Plant identification with deep learning ensembles in ExpertLifeCLEF 2018. In: 19th Working Notes of CLEF Conference and Labs of the Evaluation Forum, CLEF 2018, Avignon

Alijani Alijanvand, Hossein and Özbey, Arzu and Karimzadehkhouei, Mehrdad and Koşar, Ali (2018) The effect of curvature angle on mixing efficiency in curvilinear microchannels. In: 6th Micro and Nano Flows Conference 2018, Atlanta, USA

Altun, Esra and Aydoğdu, Mehmet Onur and Koç, Fatma and Kutlu, Özlem and Gözüaçık, Devrim and Yücel, Sevil and Gündüz, Oğuzhan (2018) Amoxicillin loaded hollow microparticles in the treatment of osteomyelitis disease using single-nozzle electrospinning. BioNanoScience, 8 (3). pp. 790-801. ISSN 2191-1630 (Print) 2191-1649 (Online)

Alver, Muhammed Burak and Ali Ahmed, Sara Atito and Çetin, Müjdat (2018) SAR ATR in the phase history domain using deep convolutional neural networks. In: Conference on Image and Signal Processing for Remote Sensing XXIV, Berlin, Germany

Amati, L. and O'Brien, P. and Götz, D. and Bozzo, E. and Tenzer, C. and Frontera, F. and Ghirlanda, G. and Labanti, C. and Osborne, J. P. and Stratta, G. and Tanvir, N. and Willingale, R. and Attina, P. and Campana, R. and Castro-Tirado, A. J. and Contini, C. and Fuschino, F. and Gomboc, A. and Hudec, R. and Orleanski, P. and Renotte, E. and Rodic, T. and Bagoly, Z. and Blain, A. and Callanan, P. and Covino, S. and Ferrara, A. and Le Floch, E. and Marisaldi, M. and Mereghetti, S. and Rosati, P. and Vacchi, A. and D'Avanzo, P. and Giommi, P. and Piranomonte, S. and Piro, L. and Reglero, V. and Rossi, A. and Santangelo, A. and Salvaterra, R. and Tagliaferri, G. and Vergani, S. and Vinciguerra, S. and Briggs, M. and Campolongo, E. and Ciolfi, R. and Connaughton, V. and Cordier, B. and Morelli, B. and Orlandini, M. and Adami, C. and Argan, A. and Atteia, J. L. and Auricchio, N. and Balazs, L. and Baldazzi, G. and Basa, S. and Basak, R. and Bellutti, P. and Bernardini, M. G. and Bertuccio, G. and Braga, J. and Branchesi, M. and Brandt, S. and Brocato, E. and Budtz-Jorgensen, C. and Bulgarelli, A. and Burderi, L. and Camp, J. and Capozziello, S. and Caruana, J. and Casella, P. and Cenko, B. and Chardonnet, P. and Ciardi, B. and Colafrancesco, S. and Dainotti, M. G. and D'Elia, V. and De Martino, D. and De Pasquale, M. and Del Monte, E. and Della Valle, M. and Drago, A. and Evangelista, Y. and Feroci, M. and Finelli, F. and Fiorini, M. and Fynbo, J. and Gal-Yam, A. and Gendre, B. and Ghisellini, G. and Grado, A. and Guidorzi, C. and Hafizi, M. and Hanlon, L. and Hjorth, J. and Izzo, L. and Kiss, L. and Kumar, P. and Kuvvetli, I. and Lavagna, M. and Li, T. and Longo, F. and Lyutikov, M. and Maio, U. and Maiorano, E. and Malcovati, P. and Malesani, D. and Margutti, R. and Martin-Carrillo, A. and Masetti, N. and McBreen, S. and Mignani, R. and Morgante, G. and Mundell, C. and Nargaard-Nielsen, H. U. and Nicastro, L. and Palazzi, E. and Paltani, S. and Panessa, F. and Pareschi, G. and Pe'er, A. and Penacchioni, A. V. and Pian, E. and Piedipalumbo, E. and Piran, T. and Rauw, G. and Razzano, M. and Read, A. and Rezzolla, L. and Romano, P. and Ruffini, R. and Savaglio, S. and Sguera, V. and Schady, P. and Skidmore, W. and Song, L. and Stanway, E. and Starling, R. and Topinka, M. and Troja, E. and van Putten, M. and Vanzella, E. and Vercellone, S. and Wilson-Hodge, C. and Yonetoku, D. and Zampa, G. and Zampa, N. and Zhang, B. and Zhang, B. B. and Zhang, S. and Zhang, S. N. and Antonelli, A. and Bianco, F. and Boci, S. and Boer, M. and Botticella, M. T. and Boulade, O. and Butler, C. and Campana, S. and Capitanio, F. and Celotti, A. and Chen, Y. and Colpi, M. and Comastri, A. and Cuby, J. G. and Dadina, M. and De Luca, A. and Dong, Y. W. and Ettori, S. and Gandhi, P. and Geza, E. and Greiner, J. and Guiriec, S. and Harms, J. and Hernanz, M. and Hornstrup, A. and Hutchinson, I. and Israel, G. and Jonker, P. and Kaneko, Yuki and Kawai, N. and Wiersema, K. and Korpela, S. and Lebrun, V. and Lu, F. and MacFadyen, A. and Malaguti, G. and Maraschi, L. and Melandri, A. and Modjaz, M. and Morris, D. and Omodei, N. and Paizis, A. and Páta, P. and Petrosian, V. and Rachevski, A. and Rhoads, J. and Ryde, F. and Sabau-Graziati, L. and Shigehiro, N. and Sims, M. and Soomin, J. and Szécsi, D. and Urata, Y. and Uslenghi, M. and Valenziano, L. and Vianello, G. and Vojtech, S. and Watson, D. and Zicha, J. (2018) The THESEUS space mission concept: science case, design and expected performances. Advances in Space Research, 62 (1). pp. 191-244. ISSN 0273-1177 (Print) 1879-1948 (Online)

Amjad, Muhammad Sohaib and Nawaz, Haq and Özsoy, Kerem and Gürbüz, Özgür and Tekin, İbrahim (2018) A low-complexity full-duplex radio implementation with a single antenna. IEEE Transactions on Vehicular Technology, 67 (3). pp. 2206-2218. ISSN 0018-9545 (Print) 1939-9359 (Online)

Amniattalab, Ayda (2018) Estimating the number of product failures: a theoretical approach. [Thesis]

Anbar, Nurdagül and Odžak, Almasa and Patel, Vandita and Quoos, Luciane and Somoza, Anna and Topuzoğlu, Alev (2018) On the Carlitz rank of permutation polynomials over finite fields: recent developments. In: Bouw, Irene I. and Ozman, Ekin and Johnson-Leung, Jennifer and Newton, Rachel, (eds.) Women in Numbers Europe II: Contributions to Number Theory and Arithmetic Geometry. Association for Women in Mathematics Series, 11. Springer Cham, pp. 39-55. ISBN 978-3-319-74997-6 (Print) 978-3-319-74998-3 (Online)

Anbar, Nurdagül and Odz̆ak, Almasa and Patel, Vandita and Quoos, Luciane and Somoza, Anna and Topuzoğlu, Alev (2018) On the difference between permutation polynomials. Finite Fields and Their Applications, 49 . pp. 132-142. ISSN 1071-5797 (Print) 1090-2465 (Online)

Aran, Volkan and Ünel, Mustafa (2018) Gaussian process regression feedforward controller for diesel engine airpath. International Journal of Automotive Technology, 19 (4). pp. 635-642. ISSN 1229-9138 (Print) 1976-3832 (Online)

Arı, Atakan B. and Karakan, M. Çağatay and Yanık, Cenk and Kaya, İsmet İnönü and Hanay, M. Selim (2018) Intermodal coupling as a probe for detecting nanomechanical modes. Physical Review Applied, 9 (3). ISSN 2331-7019

Arıcı, Ece (2018) Platinum nanoparticles supported with graphene nanoplatelets and hybrid carbon materials designed as electrocatalysts for PEM fuel cells. [Thesis]

Arık, İbrahim Utku (2018) Analysis of integrity and segregation seeking models with a product adoption application. [Thesis]

Arın, İnanç and Erpam, Mert Kemal and Saygın, Yücel (2018) I-TWEC: interactive clustering tool for Twitter. Expert Systems with Applications, 96 . pp. 1-13. ISSN 0957-4174 (Print) 1873-6793 (Online)

Arsoy, Elif Gül and Durmaz, Emre Can and Ceylan, Ömer and Özcan, Meriç and Gürbüz, Yaşar (2018) Highly efficient MIM diodes for NIR and SWIR applications. In: Infrared Technology and Applications XLIV 2018, Orlando, USA

Asif, Muhammad and Öztürk, Levent (2018) Interactive effect of elevated carbon dioxide, magnesium deficiency and drought stress on wheat. In: International Conference on Climate Smart Agriculture: The Way of Farming for 21st Century, Multan, Pakistan

Asif, Muhammad and Tunç, Cevza Esin and Öztürk, Levent (2018) Changes in yield attributes and K allocation in wheat as affected by K deficiency and elevated CO2. Plant and Soil, 426 (1-2). pp. 153-162. ISSN 0032-079X (Print) 1573-5036 (Online)

Asif, Muhammad and Tunç, Cevza Esin and Öztürk, Levent (2018) Effect of predicted climate on growth and yield of wheat grown under varied zinc and water supply. In: 17th International Congress of Soil Science, Faisalabad, Pakistan

Asif, Suleman (2018) Modelling and path planning for additive manufacturing of continuous fiber composites. [Thesis]

Asim, Muhammad Omer (2018) Receive sensitivity analysis of CMUT for underwater acoustic communication. [Thesis]

Atabakilachini, Naeimeh (2018) Non-parametric coupled shape priors for segmentation of deformable objects in time-series images using particle filters. [Thesis]

Atalay, Bora (2018) Maximally random systems, maximally degenerate ordering, and lower lower-critical spin-glass dimension. [Thesis]

Atalay, Bora and Berker, A. Nihat (2018) Lower lower-critical spin-glass dimension from quenched mixed-spatial-dimensional spin glasses. Physical Review E, 98 (4). ISSN 2470-0045 (Print) 2470-0053 (Online)

Atalay, Bora and Berker, A. Nihat (2018) Maximally random discrete-spin systems with symmetric and asymmetric interactions and maximally degenerate ordering. Physical Review E, 97 (5). ISSN 2470-0045 (Print) 2470-0053 (Online)

Atıcı, Ali Can (2018) Methods for finding the sources of leakage in cache-timing attacks and removing the profiling phase. [Thesis]

Atıcı, Ali Can and Yılmaz, Cemal and Savaş, Erkay (2018) Cache-timing attacks without a profiling phase. Turkish Journal of Electrical Engineering and Computer Sciences, 26 (4). pp. 1953-1966. ISSN 1300-0632 (Print) 1303-6203 (Online)

Atılgan, Canan (2018) Computational methods for efficient sampling of protein landscapes and disclosing allosteric regions. In: Karabencheva-Christova, T. G. and Christov, C. Z., (eds.) Advances in Protein Chemistry and Structural Biology. Academic Press, pp. 33-63. ISBN 9780128139165

Atmacasoy, Abdullah and Ok, Ahmet and Şahin, Güvenç (2018) An evaluation of introduction to industrial engineering course at Sabanci University using CIPP model. In: 9th International Conference on Engineering Education for Sustainable Development (EESD2018), Glasboro, New Jersey, USA

Attari, Mahdi Yousefi Nejad and Ebadi Torkayesh, Ali (2018) Developing benders decomposition algorithm for a green supply chain network of mine industry: case of Iranian mine industry. Operations Research Perspectives, 5 . pp. 371-382. ISSN 2214-7160

Avşar, Bihter and Esmaeilialiabadi, Danial (2018) Evolutionary insights into micrornas of kiwifruit actinidia Chinensis and its close relatives. In: IX International Scientific Agriculture Symposium (Agrosym 2018), Jahorina, Bosnia and Herzegovina

Avşar, Bihter and Esmaeilialiabadi, Danial (2018) Identification of in silico mirnas in four plant species from fabaceae family. Agrofor: International Journal, 3 (3). pp. 122-130. ISSN 2490-3434 (Print) 2490-3442 (Online)

Avşar Esmaeilialiabadi, Bihter and Esmaeilialiabadi, Danial (2018) Identification of microRNA elements from genomic data of European hazelnut (Corylus avellana L.) and its close relatives. Kitakanto Medical Journal, 68 (1). pp. 190-196. ISSN 1343-2826

Ay, Atıl Utku and Mancillas-López, Cuauhtémoc and Öztürk, Erdinç and Rodríguez-Henríquez, Francisco and Savaş, Erkay (2018) Constant-time hardware computation of elliptic curve scalar multiplication around the 128 bit security level. Microprocessors and Microsystems, 62 . pp. 79-90. ISSN 0141-9331 (Print) 1872-9436 (Online)

Aydın, Mehmet Serhat and Kızıltaş, Güllü and Kuloğlu, Büşra (2018) Fabrication of composite bone scaffolds with controlled multi-scale porosity using non-solvent induced phase separation based 3D printing. In: Materials Research Society Fall 2018 Meetings, Boston, USA

Aydın, Mehmet Serhat and Kuloğlu, Büşra and Sipahi, Çağla and Çayır, Berkay and Kızıltaş, Güllü (2018) Integrated design scheme based on mechano-biology and level set based topology optimization for bone scaffolds. In: Materials Research Society Fall 2018 Meetings, Boston, USA

Aydın, Yusuf and Tokatlı, Ozan and Patoğlu, Volkan and Başdoğan, Çağatay (2018) Fiziksel insan-robot etkileşimi için kesir dereceli admitans denetleyicisi. In: Türkiye Robotbilim Konferansı (ToRK), İstanbul, Türkiye

Aydin, Yusuf and Tokatli, Ozan and Patoğlu, Volkan and Basdogan, Cagatay (2018) Stable physical human-robot interaction using fractional order admittance control. IEEE Transactions on Haptics, 11 (3). pp. 464-475. ISSN 1939-1412 (Print) 2329-4051 (Online)

Azgın, Hasan and Mert, Ahmet Can and Kalalı, Ercan and Hamzaoğlu, İlker (2018) A reconfigurable fractional interpolation hardware for VVC motion compensation. In: 21st Euromicro Conference on Digital System Design (DSD), Prague, Czech Republic

Azgın, Hasan and Mert, Ahmet Can and Kalalı, Ercan and Hamzaoğlu, İlker (2018) An efficient FPGA implementation of HEVC intra prediction. In: IEEE International Conference on Consumer Electronics (ICCE 2018), Las Vegas, NV, USA

Bagherzadeh, Amin (2018) Experimental investigation of alternative cooling methods in machining operations. [Thesis]

Bagherzadeh, Amin and Budak, Erhan (2018) Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach. Tribology International, 119 . pp. 510-520. ISSN 0301-679X (Print) 1879-2464 (Online)

Bahmani Jalali, Houman and Aria, Mohammad Mohammadi and Dikbaş, Uğur Meriç and Sadeghi, Sadra and Kumar, Baskaran Ganesh and Şahin, Mehmet and Kavaklı, İbrahim Halil and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) Effective neural photostimulation using indium-based type-II quantum dots. Acs Nano, 12 (8). pp. 8104-8114. ISSN 1936-0851 (Print) 1936-086X (Online)

Bajwa, Rayan (2018) Intrinsic stress-induced self-assembly of multilayer thin films for fabrication of three-dimensional micro devices. [Thesis]

Bajwa, Rayan and Yapıcı, Murat Kaya (2018) Self-assembly of high performance on-chip RF-MEMS inductors using internal stress. In: 19th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Toulouse, France

Bakan, Feray (2018) Gene delivery by hydroxyapatite and calcium phosphate nanoparticles: a review of novel and recent applications. In: Thirumalai, Jagannathan, (ed.) Hydroxyapatite: Advances in Composite Nanomaterials, Biomedical Applications and Its Technological Facets. IntechOpen, London, UK, pp. 157-176. ISBN 978-953-51-3804-4 (Print) 978-953-51-3805-1 (Online)

Bakan, Feray and Çokol Çakmak, Melike and Sezen, Meltem and Çelik, Elif and Khan, Zaeema (2018) Direct focused ion litography of biphasic calcium phosphate (BCP) bioceramics surfaces. In: 19th International Metallurgy and Materials Congress (IMMC 2018), Istanbul, Turkey

Ball, Simeon and Lavrauw, Michel (2018) Planar arcs. Journal of Combinatorial Theory, Series A, 160 . pp. 261-287. ISSN 0097-3165 (Print) 1096-0899 (Online)

Bao, Guanlong and Göğüş, Nihat Gökhan and Pouliasis, Stamatis (2018) On Dirichlet spaces with a class of superharmonic weights. Canadian Journal of Mathematics, 70 (4). pp. 721-741. ISSN 0008-414X (Print) 1496-4279 (Online)

Barak, Melike (2018) Synthesis and characterization of highly stable functional silica nanoparticles for LbL assembly. [Thesis]

Baran, Eray A. and Uzunovic, Tarik and Şabanoviç, Asif (2018) Performance improvement of bilateral control systems using derivative of force. Robotica, 36 (11). pp. 1627-1640. ISSN 0263-5747 (Print) 1469-8668 (Online)

Baranauskaite, Juste and Duman, Gülengül and Çorapcıoğlu, Gülcan and Baranauskas, Algirdas and Taralp, Alpay and Ivanauskas, Liudas and Bernatoniene, Jurga (2018) Liposomal incorporation to improve dissolution and stability of rosmarinic acid and carvacrol extracted from oregano (O. onites L.). BioMed Research International, 2018 . ISSN 2314-6133 (Print) 2314-6141 (Online)

Barıştıran Kaynak, Canan and Yamamoto, Yuji and Goeritz, A. and Korndoerfer, F. and Zaumseil, P. and Kulse, P. and Schulz, K. and Wietstruck, M. and Shafique, Atia and Gürbüz, Yaşar and Kaynak, Mehmet (2018) High performance thermistor based on Si1-xGex/Si multi quantum wells. IEEE Electron Device Letters, 39 (5). pp. 753-756. ISSN 0741-3106 (Print) 1558-0563 (Online)

Baristiran Kaynak, C. and Yamamoto, Y. and Göritz, A. and Korndörfer, F. and Zaumseil, P. and Kulse, P. and Schulz, K. and Fraschke, M. and Marschmeyer, S. and Wolansky, D. and Wietstruck, M. and Shafique, Atia and Gürbüz, Yaşar and Kaynak, Mehmet (2018) Si1-xGex/Si MQW based uncooled microbolometer development and integration into 130 nm BiCMOS technology. In: 8th Symposium on SiGe, Ge, and Related Compounds: Materials, Processing, and Devices - AiMES 2018, ECS and SMEQ Joint International Meeting, Cancun, Mexico

Barzegar Osgouei, Zahra and Özlü, Emre and Altan, Erhan and Budak, Erhan (2018) Heat modeling for third deformation zone. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Bayraktar, Öznur and Gözüaçık, Devrim (2018) The crosstalk between miRNAs and autophagy in cancer progression. In: Fayyaz, Sundas and Farooqi, Ammad Ahmad, (eds.) Recent Trends in Cancer Biology: Spotlight on Signaling Cascades and microRNAs. Springer International Publishing, USA, pp. 279-291. ISBN 978-3-319-71552-0 (Print) 978-3-319-71553-7 (Online)

Bayraktar, Turgay (2018) Almost sure invariance principle for non-autonomous holomorphic dynamics in P-k. Conformal Geometry and Dynamics, 22 (4). pp. 45-61. ISSN 1088-4173

Bayraktar, Turgay (2018) Expected number of real roots for random linear combinations of orthogonal polynomials associated with radial weights. Potential Analysis, 48 (4). pp. 459-471. ISSN 0926-2601 (Print) 1572-929X (Online)

Bayraktar, Turgay and Bloom, Thomas and Levenberg, Norman (2018) Pluripotential theory and convex bodies. Sbornik Mathematics, 209 (3). pp. 352-384. ISSN 1064-5616 (Print) 1468-4802 (Online)

Bayraktar, Turgay and Coman, Dan and Hermann, Hendrik and Marinescu, George (2018) A survey on zeros of random holomorphic sections. Dolomites Research Notes on Approximation (SI), 11 (4). pp. 1-19. ISSN 2035-6803

Baysal, Mustafa (2018) Low-Temperature catalytic synthesis of boron nitride nanotubes by alkalı metal ferrites. [Thesis]

Baysal, Mustafa and Bilge, Kaan and Yıldızhan, Melike Mercan and Yorulmaz, Yelda and Öncel, Çınar and Papila, Melih and Yürüm, Yuda (2018) Catalytic synthesis of boron nitride nanotubes at low temperatures. Nanoscale, 10 (10). pp. 4658-4662. ISSN 2040-3364 (Print) 2040-3372 (Online)

Baysal, Mustafa and Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih and Yürüm, Yuda (2018) Preparation of high surface area activated carbon from waste-biomass of sunflower piths: Kinetics and equilibrium studies on the dye removal. Journal of Environmental Chemical Engineering, 6 (2). pp. 1702-1713. ISSN 2213-3437 (Print) 2213-2929 (Online)

Bediz, Bekir (2018) A spectral-Tchebychev solution technique for determining vibrational behavior of thick plates having arbitrary geometry. Journal of Sound and Vibration, 432 . pp. 272-289. ISSN 0022-460X (Print) 1095-8568 (Online)

Bediz, Bekir (2018) Effects of the rotational speed on the dynamics of micro cutting tools. In: 18th International Conference on Machine Design and Production, Eskisehir, Turkey

Bediz, Bekir (2018) Three-dimensional vibration behavior of bi-directional functionally graded curved parallelepipeds using spectral Tchebychev approach. Composite Structures, 191 . pp. 100-112. ISSN 0263-8223 (Print) 1879-1085 (Online)

Bediz, Bekir and Aksoy, Serdar (2018) A spectral-Tchebychev solution for three-dimensional dynamics of curved beams under mixed boundary conditions. Journal of Sound and Vibration, 413 . pp. 26-40. ISSN 0022-460X (Print) 1095-8568 (Online)

Bediz, Bekir and Özdoğanlar, O. Burak (2018) Predicting the rotating tool-tip dynamics in mechanical micromachining using modal testing. In: International Congress on Machining (UTIS 2018), Antalya, Turkey

Beenakker, C. W. J. and Gnezdilov, N. V. and Dresselhaus, E. and Ostroukh, V. P. and Herasymenko, Y. and Adagideli, İnanç and Tworzydło, J. (2018) Valley switch in a graphene superlattice due to pseudo-Andreev reflection. Physical Review B: Condensed Matter and Materials Physics, 97 (24). ISSN 1098-0121 (Print) 1550-235X (Online)

Benli, Onur and Ertan, Ünal (2018) Central compact objects: some of them could be spinning up? Monthly Notices of the Royal Astronomical Society, 478 (4). pp. 4890-4893. ISSN 0035-8711 (Print) 1365-2966 (Online)

Benli, Onur and Ertan, Ünal (2018) Rotational and X-ray luminosity evolution of high-B radio pulsars. New Astronomy, 61 . pp. 78-83. ISSN 1384-1076 (Print) 1384-1092 (Online)

Berkün, Işıl and Kızıltaş, Güllü (2018) Optimization of dry powder deposition parameters for production of large substrates using functionally graded ceramics. International Journal of Applied Ceramic Tecnology, 15 (5). pp. 1199-1211. ISSN 1546-542X (Print) 1744-7402 (Online)

Bharadwaj, Shiv Kumar and Pandey, Ashish and Yağcı, Barış and Özgüz, Volkan and Qureshi, Anjum (2018) Graphene nano-mesh-Ag-ZnO hybrid paper for sensitive SERS sensing and self-cleaning of organic pollutants. Chemical Engineering Journal, 336 . pp. 445-455. ISSN 1385-8947 (Print) 1873-3212 (Online)

Bigdeli, Mina and Herzog, Jürgen and Hibi, Takayuki and Asloob Topaçoğlu, Ayesha and Shikama, Akihiro (2018) Isotonian algebras. Nagoya Mathematical Journal, 230 . pp. 83-101. ISSN 0027-7630 (Print) 2152-6842 (Online)

Bilen, Bukem and Ateş Alkan, Fatma and Barutcu, Ümit Bora and Sezen, Meltem and Ünlü, Mehmet Burçin and Aghahev, Kamran (2018) Examination of metal mobilization from a gunshot by scanning acoustic microscopy, scanning electron microscopy, energy-dispersive X-Ray spectroscopy, and inductively coupled plasma optical emission spectroscopy: a case report. Journal of Medical Case Reports, 12 (1). ISSN 1752-1947

Bilgin Taşdemir, Esma Fatıma (2018) A large vocabulary online handwriting recognition system for Turkish. [Thesis]

Bilgin Taşdemir, Esma Fatıma and Yanıkoğlu, Berrin (2018) Large vocabulary recognition for online Turkish handwriting with sublexical units. Turkish Journal of Electrical Engineering and Computer Sciences, 26 (5). pp. 2218-2233. ISSN 1300-0632 (Print) 1303-6203 (Online)

Borofsky, Talia and Zhou, Rebecca and Barranca, Victor and Mayack, Christopher (2018) Hive minded: like neurons, honeybees collectively integrate inhibitory stop signals to efficiently regulate forager recruitment. In: International Union for the Study of Social Insects (IUSSI 2018), Guarujá, Brazil

Boyd, Laura Susan and Gözüaçık, Devrim and Joubert, Anna Margaretha (2018) The in vitro effects of a novel estradiol analog on cell proliferation and morphology in human epithelial cervical carcinoma. Cellular & Molecular Biology Letters, 23 . ISSN 1425-8153 (Print) 1689-1392 (Online)

Boz, Zeynep and Gunnec, Dilek and Birbil, S. Ilker and Öztürk, M. Kaan (2018) Reassessment and monitoring of loan applications with machine learning. Applied Artificial Intelligence, 32 (9-10). pp. 939-955. ISSN 0883-9514 (Print) 1087-6545 (Online)

Bozkurt, Ahmet Mert and Pekerten, Barış and Adagideli, İnanç (2018) Work extraction and Landauer's principle in a quantum spin Hall device. Physical Review B: Condensed Matter and Materials Physics, 97 (24). ISSN 1098-0121 (Print) 1550-235X (Online)

Bshara, Oday and Liu, Yuqiao and Tekin, İbrahim and Taskin, Baris and Dandekar, Kapil R. (2018) Mm wave antenna gain switching to mitigate indoor blockage. In: IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, Boston, MA, USA

Bshara, Oday and Liu, Yuqiao and Tekin, İbrahim and Taşkın, Barış and Dandekar, Kapil R. (2018) mmWave indoor blockage solution: high/low gain switching. In: IEEE APS/URSI Symposium 2018, Boston, USA (Accepted)

Budak, Erhan (2018) Machining process improvement through process twins. In: Ni, Jun and Majstorovic, Vidosav D. and Djurdjanovic, Dragan, (eds.) Proceedings of 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Switzerland, pp. 164-179. ISBN 978-3-319-89562-8 (Print) 978-3-319-89563-5 (Online)

Bürgy, Reinhard and Bülbül, Kerem (2018) The job shop scheduling problem with convex costs. European Journal of Operational Research, 268 (1). pp. 82-100. ISSN 0377-2217 (Print) 1872-6860 (Online)

Büyük, Murat and Atahan, Ali Osman and Kurucuoğlu, Kenan (2018) Impact performance evaluation of a crash cushion design using finite element simulation and full-scale crash testing. Safety, 4 (4). ISSN 2313-576X

Cakir, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2018) Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face. International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 81-89. ISSN 0268-3768 (Print) 1433-3015 (Online)

Candan, Nilgün and Çakmak, İsmail and Öztürk, Levent (2018) Zinc-biofortified seeds improved seedling growth under zinc deficiency and drought stress in durum wheat. Journal of Plant Nutrition and Soil Science, 181 (3). pp. 388-395. ISSN 1436-8730 (Print) 1522-2624 (Online)

Candan, Ömer Mert and Levi, Albert and Togay, Cengiz (2018) Generating one-time keys for secure multimedia communication. In: IEEE International Conference on Communications Workshops (ICC Workshops), Kansas City, MO, USA

Cantürk, Bilal and Oikonomou, Thomas and Baris Bagci, G. (2018) The parameter space and third law of thermodynamics for the Borges-Roditi, Abe and Sharma-Mittal entropies. International Journal of Modern Physics B, 32 (24). ISSN 0217-9792 (Print) 1793-6578 (Online)

Carlet, Claude and Güneri, Cem and Mesnager, Sihem and Özbudak, Ferruh (2018) Construction of some codes suitable for both side channel and fault injection attacks. In: 7th International Workshop on the Arithmetic of Finite Fields (WAIFI 2018), Bergen, Norway

Carlet, Claude and Güneri, Cem and Özbudak, Ferruh and Özkaya, Buket and Sole, Patrick (2018) On linear complementary pairs of codes. IEEE Transactions on Information Theory, 64 (10). pp. 6583-6589. ISSN 0018-9448 (Print) 1557-9654 (Online)

Carlet, Claude and Güneri, Cem and Özbudak, Ferruh and Sole, Patrick (2018) A new concatenated type construction for LCD codes and isometry codes. Discrete Mathematics, 341 (3). pp. 830-835. ISSN 0012-365X (Print) 1872-681X (Online)

Celik, Turku Ozlum and Elias, Yara and Güneş, Burçin and Newton, Rachel and Ozman, Ekin and Pries, Rachel and Thomas, Lara (2018) Non-ordinary curves with a prym variety of low p-rank. In: Bouw, Irene I. and Ozman, Ekin and Johnson-Leung, Jennifer and Newton, Rachel, (eds.) Women in Numbers Europe II: Contributions to Number Theory and Arithmetic Geometry. Association for Women in Mathematics Series, 11. Springer Cham, pp. 117-158. ISBN 978-3-319-74997-6 (Print) 978-3-319-74998-3 (Online)

Ceylan, Ömer and Mishra, Geetesh Kumar and Yazıcı, Melik and Çakmakcı, Rıza Can and Kolkar, Javed and Qureshi, Anjum and Gürbüz, Yaşar (2018) Development of hand-held point-of-care diagnostic device for detection of multiple cancer and cardiac disease biomarkers. In: IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy

Ceylan, Ömer and Mishra, Geetesh Kumar and Yazıcı, Melik and Qureshi, Anjum and Kolkar Mohammed, Javed Hussain Niazi and Gürbüz, Yaşar (2018) A hand-held point-of-care biosensor device for detection of multiple cancer and cardiac disease biomarkers using interdigitated capacitive arrays. IEEE Transactions on Biomedical Circuits and Systems, 12 (6). pp. 1440-1449. ISSN 1932-4545 (Print) 1940-9990 (Online)

Chouhan, Raghuraj Singh and Kolkar Mohammed, Javed Hussain Niazi and Qureshi, Anjum (2018) Development of an immunoblot assay for carcinoembryonic antigen (CEA) in human serum using a portable UV illuminator. Analytical Methods, 10 (9). pp. 947-949. ISSN 1759-9660 (Print) 1759-9679 (Online)

Cousins, David Bruce and Di Crescenzo, Giovanni and Gür, Kamil Doruk and King, Kevin and Polyakov, Yuriy and Rohloff, Kurt and Ryan, Gerard W. and Savaş, Erkay (2018) Implementing conjunction obfuscation under entropic ring LWE. In: IEEE Symposium on Security and Privacy (SP 2018), San Francisco, California, USA

Cuckovic, Zeljko and Şahutoğlu, Sönmez and Zeytuncu, Yunus E. (2018) A local weighted Axler-Zheng theorem in C-n. Pacific Journal of Mathematics, 294 (1). pp. 89-106. ISSN 0030-8730

Çakmak, İsmail and Kutman, U. B. (2018) Agronomic biofortification of cereals with zinc: a review. European Journal of Soil Science, 69 (1). pp. 172-180. ISSN 1351-0754 (Print) 1365-2389 (Online)

Çakmak, Umut Can and Apaydın, Serkan Mehmet and Çatay, Bülent (2018) Traffic speed prediction with neural networks. In: Annual International Conference of the German Operations Research Society (GOR), Berlin, Germany

Çakmak, Umut Can and Çatay, Bülent and Apaydın, Serkan Mehmet (2018) A neural network approach for predicting speeds on road networks. In: 26th Signal Processing and Communications Applications Conference (SIU 2018), Izmir, Turkey

Çaldağ, Hakan Osman and Yeşilyurt, Serhat (2018) Dynamics of artificial helical microswimmers under confinement. In: 16th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2018), Dubrovnik, Croatia

Çalışkan, Umut and Apaydın, Ardan and Otaran, Ata and Patoğlu, Volkan (2018) A series elastic brake pedal to preserve conventional pedal feel under regenerative braking. In: 25th IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Madrid, Spain

Çalpur, Mehmet Çağrı and Tatlidede, Mehmet Utku and Cataloglu, Irmak (2018) Domain specific conversational intelligent agents: natural language processing in real world applications. In: 12th Turkish National Software Engineering Symposium, UYMS 2018, Istanbul, Turkey

Çamiç, Büşra Tuğba and Oytun, Faruk and Sezen, Meltem and Aslan, Muhammed Hasan and Başarır, Fevzihan (2018) Fabrication of graphene/silver nanowire based transparent conductive solar cell electrodes via LbL deposition. In: 19th International Metallurgy and Materials Congress (IMMC 2018), Istanbul, Turkey

Çamiç, Büşra Tuğba and Shin, Hee Jeong and Aslan, M. Hasan and Başarır, Fevzihan and Choi, Hyosung (2018) Solution-processable transparent conducting electrodes via the self-assembly of silver nanowires for organic photovoltaic devices. Journal of Colloid and Interface Science, 512 . pp. 158-164. ISSN 0021-9797 (Print) 1095-7103 (Online)

Çelik, Alihan (2018) How do local interaction patterns affect the global behavior of a community: schelling model revisited. [Thesis]

Çetin Karayumak, Süheyla and Özarslan, Evren and Unal, Gozde (2018) Asymmetric Orientation Distribution Functions (AODFs) revealing intravoxel geometry in diffusion MRI. Magnetic Resonance Imaging, 49 . pp. 145-158. ISSN 0730-725X (Print) 1873-5894 (Online)

Çetindoğan, Barbaros and Üstündağ, Berktuğ and Burak, Abdurrahman and Wietstruck, Matthias and Kaynak, Mehmet and Gürbüz, Yaşar (2018) A 5-13 GHz 6-Bit vector-sum phase shifter with+3.5 dBm IP1dB in 0.25-mu m SiGe BiCMOS. In: IEEE Asia Pacific Microwave Conference (APMC), Kuala Lumpur, Malaysia

Çetindoğan, Barbaros and Üstündağ, Berktuğ and Türkmen, Eşref and Wietstruck, Matthias and Kaynak, Mehmet and Gürbüz, Yaşar (2018) A d-band SPDT switch utilizing reverse-saturated SiGe HBTs for dicke-radiometers. In: 11th German Microwave Conference (GeMiC), Freiburg, Germany

Çiftçi, Özgün Cem (2018) Investigation of gene transfer potential with classical hybridization in vuralia turcica and identification of rhizobacterial species contributing its development. [Thesis]

Çirişci, Berk and Kahraman, Muhammed Kerem and Yıldırımoğlu, Çağrı Uluç and Kaya, Kamer and Yenigün, Hüsnü (2018) Using structure of automata for faster synchronizing heuristics. In: 6th International Conference on Model-Driven Engineering and Software Development (MODELSWARD 2018), Funchal, Madeira, Portugal

Çokol, Murat and Li, Chen and Chandrasekaran, Sriram (2018) Chemogenomic model identifies synergistic drug combinations robust to the pathogen microenvironment. PLoS Computational Biology, 14 (12). ISSN 1553-734X (Print) 1553-7358 (Online)

Çokol-Çakmak, Melike and Bakan, Feray and Çetiner, Selim and Çokol, Murat (2018) Diagonal method to measure synergy among any number of drugs. Journal of Visualized Experiments (JoVE), 2018 (136). ISSN 1940-087X

Çoskun, Sıla and Baytok, Esma and Özlü, Emre and Sert Alağaç, Melike and Akın, Cenk (2018) Experimental analysis of orange peel problem in turning of titanium alloys. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Dabbour, Abdul Rahman and Şabanoviç, Asif and Elitaş, Meltem (2018) PID-controlled laparoscopic appendectomy device. In: Avdaković, Samir, (ed.) Advanced Technologies, Systems, and Applications III: Proceedings of the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT), Volume 1. Lecture Notes in Networks and Systems, 59. Springer, pp. 375-382. ISBN 978-3-030-02573-1 (Print) 978-3-030-02574-8 (Online)

Dabbour, Abdul Rahman and Şabanoviç, Asif and Elitaş, Meltem (2018) PID-controlled laparoscopic appendectomy device. In: The International Symposium on Mechatronics, Robotics and Embedded Systems (MRES 2018), Bosnia and Herzegovina (Accepted)

Dai, Wei and Doroz, Yarkın and Polyakov, Yuriy and Rohloff, Kurt and Sajjadpour, Hadi and Savaş, Erkay and Sunar, Berk (2018) Implementation and evaluation of a lattice-based key-policy ABE scheme. IEEE Transactions on Information Forensics & Security, 13 (5). pp. 1169-1184. ISSN 1556-6013 (Print) 1556-6021 (Online)

Datsuk, A. and Kaynak, Mehmet and Krupkina, T. (2018) Automation of electro-thermal simulations based on thermal conductivity optimization. In: 19th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Toulouse, France

Davari, Amirabbas and Aptoula, Erchan and Yanıkoğlu, Berrin and Maier, Andreas and Riess, Christian (2018) GMM-based synthetic samples for classification of hyperspectral images with limited training data. IEEE Geoscience and Remote Sensing Letters, 15 (6). pp. 942-946. ISSN 1545-598X (Print) 1558-0571 (Online)

Davulcu, Murat and Çalışkan, Can and Kalyoncu, İlker and Gürbüz, Yaşar (2018) An X-band SiGe BiCMOS triple-cascode LNA with boosted gain and P1dB. IEEE Transactions on Circuits and Systems II: Express Briefs, 65 (8). pp. 994-998. ISSN 1549-7747 (Print) 1558-3791 (Online)

Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) Modeling 3D melt electrospinning writing by response surface methodology. Materials & Design, 148 . pp. 87-95. ISSN 0264-1275 (Print) 1873-4197 (Online)

Degenaar, Nathalie and Ballantyne, David R. and Belloni, Tomaso and Chakraborty, Manoneeta and Chen, Yu Peng and Ji, Long and Kretschmar, Peter and Kuulkers, Erik and Li, Jian and Maccarone, Thomas J. and Malzac, Julien and Zhang, Shu and Zhang, Shuang Nan (2018) Accretion disks and coronae in the x-ray flashlight. Space Science Reviews, 214 (1). ISSN 0038-6308 (Print) 1572-9672 (Online)

Demir, Ebru (2018) Low Reynolds number swimming of helical structures and rigid spheres. [Thesis]

Demir, Ebru and Yeşilyurt, Serhat (2018) Rolling and sliding of spheres inside horizontal channels. In: International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Nagoya, Japan

Demir, Eralp and Mercan, Safiye Canset (2018) A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response. International Journal of Machine Tools and Manufacture, 134 . pp. 25-41. ISSN 0890-6955 (Print) 1879-2170 (Online)

Deretic, Vojo and Prossnitz, Eric and Burge, Mark and Campen, Matthew J. and Cannon, Judy and Liu, Ke Jian and Sklar, Larry A. and Allers, Lee and Garcia, Sally Ann and Baehrecke, Eric H. and Behrends, Christian and Cecconi, Francesco and Codogno, Patrice and Chen, Guang-Chao and Elazar, Zvulun and Eskelinen, Eeva-Liisa and Fourie, Bernard and Gözüaçık, Devrim and Hong, Wanjin and Hotamisliği, Gökhan and Jaattela, Marja and Jo, Eun-Kyeong and Johansen, Terje and Juhasz, Gabor and Kimchi, Adi and Ktistakis, Nicholas and Kroemer, Guido and Mlzushima, Noboru and Münz, Christian and Reggiori, Fulvio and Rubinsztein, David and Ryan, Kevin and Schroder, Kate and Simonsen, Anne and Tooze, Sharon and Vaccaro, Maria I. and Yoshimori, Tamotsu and Yu, Li and Zhang, Hong and Klionsky, Daniel J. (2018) Autophagy, Inflammation, and Metabolism (AIM) Center of Biomedical Research Excellence: supporting the next generation of autophagy researchers and fostering international collaborations. Autophagy . ISSN 1554-8627 (Print) 1554-8635 (Online) Published Online First http://dx.doi.org/10.1080/15548627.2018.1465784

Diker, Fırat (2018) Quantum delayed-choice protocol by means of the polarization degree of freedom of a photon. Journal of the Optical Society of America B: Optical Physics, 35 (2). pp. 284-286. ISSN 0740-3224 (Print) 1520-8540 (Online)

Dufossé, Fanny and Kaya, Kamer and Panagiotas, Ioannis and Uçar, Bora (2018) Further notes on Birkhoff-von Neumann decomposition of doubly stochastic matrices. Linear Algebra and Its Applications, 554 . pp. 68-78. ISSN 0024-3795 (Print) 1873-1856 (Online)

Dufossé, Fanny and Kaya, Kamer and Panagiotas, Ioannis and Uçar, Bora (2018) Scaling matrices and counting the perfect matchings in graphs. [Working Paper / Technical Report] Sabanci University ID:9161

Durası, İlknur Melis (2018) Identification of miRNA regulatory pathways in complex diseases. [Thesis]

Durmaz, Emre Can (2018) HfO2, Al2O3, and ZnO based Metal-Insulator-Metal photovoltaic structures for solar cell applications. [Thesis]

Ebrahimi Araghizad, Arash (2018) Geometrical optimization of the broaching tools by leveling of the cutting forces. [Thesis]

Elçi, Özgün and Noyan, Nilay (2018) A chance-constrained two-stage stochastic programming model for humanitarian relief network design. Transportation Research Part B: Methodological, 108 . pp. 55-83. ISSN 0191-2615

Elçi, Özgün and Noyan, Nilay and Bülbül, Kerem (2018) Chance-constrained stochastic programming under variable reliability levels with an application to humanitarian relief network design. Computers and Operations Research, 96 . pp. 91-107. ISSN 0305-0548 (Print) 1873-765X (Online)

Elitaş, Meltem (2018) On-chip isoniazid exposure of mycobacterium smegmatis penicillin-binding protein (PBP) mutant using time-lapse fluorescent microscopy. Micromachines, 9 (11). ISSN 2072-666X

Erbay, Hüsnü A. and Erbay, Saadet and Erkip, Albert (2018) Convergence of a semi-discrete numerical method for a class of nonlocal nonlinear wave equations. ESAIM: Mathematical Modelling and Numerical Analysis, 52 (3). pp. 803-826. ISSN 0764-583X (Print) 1290-3841 (Online)

Erdem, Esra (2018) Teaching logic with a socratic method. In: Sabanci University 1st Internal Education Conference, Istanbul, Turkey

Erdem, Esra and Patoğlu, Volkan (2018) Applications of ASP in robotics. Künstliche Intelligenz, 32 (2-3). pp. 143-149. ISSN 0933-1875 (Print) 1610-1987 (Online)

Erdem, Esra and Patoğlu, Volkan (2018) Developing an educational tool for teaching cognitive robotics. In: Sabanci University 1st Internal Education Conference, Istanbul, Turkey

Erdem, Öğüt and Yanık, Cenk and Kaya, İsmet İnönü and Ow-Yang, Cleva W. and Şendur, Kürşat (2018) Focusing short-wavelength surface plasmons by a plasmonic mirror. Optics Letters, 43 (9). pp. 2208-2211. ISSN 0146-9592 (Print) 1539-4794 (Online)

Erdemir, Oytun (2018) Design of a Co-simulation environment for the docking maneuver of an autonomous underwater vehicle using radio frequency and acoustic hybrid communication. [Thesis]

Erdil, Ertunç (2018) Bayesian methods for segmentation of objects from multimodal and complex shape densities using statistical shape priors. [Thesis]

Erdöl, Sevim and Ow-Yang, Cleva W. and Sezen, Meltem and Büyükaksoy, Aligül (2018) La0.6 Sr0.4 CoO3 thin film cathodes prepared by polymeric precursors for solid oxid fuel cells. In: IV. International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress (SERES'18), Eskisehir, Turkey

Erduran, Erol and Deǧer, Orhan and Birinci, Yelda and Ayar, Ahmet and Bahadır, Ayşenur (2018) Augmented mitochondrial cytochrome c oxidase activity in children with iron deficiency: a tandem between iron and copper? Archives of Medical Science, 14 (1). pp. 151-156. ISSN 1734-1922 (Print) 1896-9151 (Online)

Eren, Tolga Mustafa and Balcısoy, Selim (2018) Evaluation of X-ray visualization techniques for vertical depth judgments in underground exploration. Visual Computer, 34 (3). pp. 405-416. ISSN 0178-2789 (Print) 1432-2315 (Online)

Erman, Batu and Piepoli, Sofia and Mancini, Erika and Alt, Aaron (2018) (1 July 2018) BTB domain of mouse PATZ1. [Dataset]

Erman, Batu and Piepoli, Sofia and Mancini, Erika and Alt, Aaron (2018) (1 July 2018) Structure of the BTB domain of zebrafish PATZ1. [Dataset]

Eroglu, Fatih and Yildirim, Afsin T. and Yesilyurt, Ogulcan and Şaş Çaycı, Hatice Sinem and Ciftci, Cihan (2018) Investigation of compressive performance of 3D printed carbon fiber reinforced plastics. In: SAMPE Long Beach 2018 Conference and Exhibition, Long Beach, CA, usa

Eroğlu, Günet and Aydın, Serap and Çetin, Müjdat and Balcısoy, Selim (2018) Improving cognitive functions of dyslexies using multi-sensory learning and EEG neurofeedback. In: 26th Signal Processing and Communications Applications Conference (SIU 2018), Izmir, Turkey

Eroğlu, Günet and Çetin, Müjdat and Balcısoy, Selim (2018) Electroencephalographic identifiers of reading abilities in turkish language. In: 26th Signal Processing and Communications Applications Conference (SIU 2018), Izmir, Turkey

Eroğlu, Günet and Ekici, Bariş and Arman, Fehim and Gürkan, Mert and Çetin, Müjdat and Balcısoy, Selim (2018) Can we predict who will respond more to neurofeedback with resting state EEG? In: Medical Technologies National Congress (TIPTEKNO), Magusa, Cyprus

Ertan, Ünal (2018) Accretion and propeller torque in the spin-down phase of neutron stars: the case of transitional millisecond pulsar PSR J1023+0038. Monthly Notices of the Royal Astronomical Society, 479 (1). L12-L16. ISSN 0035-8711 (Print) 1365-2966 (Online)

Ertaş Uslu, Merve and Mısırlıoğlu, Burç and Şendur, Kürşat (2018) Selective IR response of highly textured phase change VO2 nanostructures obtained via oxidation of electron beam deposited metallic V films. Optical Materials Express, 8 (8). pp. 2035-2049. ISSN 2159-3930

Ertekin, Elifnas (2018) On a dynamic pricing model with a possibility to exit the market. [Thesis]

Eskin, Murat Gökhan (2018) Polymer electrolyte membrane fuel cells operating under ultra-low stoichiometric anode flow conditions. [Thesis]

Esmaeilialiabadi, Danial (2018) Carbon capture, utilization and storage in the context of Turkish energy market. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Farhanieh, Omid (2018) Design and implementation of intravascular hifu catheter ablation system. [Thesis]

Ferrère, Thomas and Henzinger, Thomas A. and Saraç, Naci Ege (2018) A theory of register monitors. In: 33rd Annual ACM/IEEE Symposium on Logic in Computer Science, LICS 2018, Oxford, England

Fındık, Yasin (2018) Introducing assistive analytical agent for exploratory and decision making in analytical multi-user sessions. [Thesis]

Fuad, Zain (2018) Improving human action recognition using decision level fusion of classifiers trained with depth and inertial data. [Thesis]

Fuad, Zain and Ünel, Mustafa (2018) Human action recognition using fusion of depth and inertial sensors. In: 15th International Conference on Image Analysis and Recognition, ICIAR 2018, Povoa de Varzim, Portugal

Gamayun, O. V. and Ostroukh, V. P. and Gnezdilov, N. V. and Adagideli, İnanç and Beenakker, C. W. J. (2018) Valley-momentum locking in a graphene superlattice with Y-shaped Kekulé bond texture. New Journal of Physics, 20 (2). ISSN 1367-2630

Gençali, Ali Arda (2018) Long-term evolution and physical properties of rotating radio transients. [Thesis]

Gençali, Ali Arda and Ertan, Ünal (2018) Long-term evolution of RRAT J1819-1458. Monthly Notices of the Royal Astronomical Society, 481 (1). pp. 244-249. ISSN 0035-8711 (Print) 1365-2966 (Online)

Gezici, Gizem and Yanıkoğlu, Berrin (2018) Sentiment analysis in Turkish. In: Oflazer, Kemal and Saraçlar, Murat, (eds.) Turkish Natural Language Processing. Theory and Applications of Natural Language Processing. Springer International Publishing, Switzerland, pp. 255-271. ISBN 978-3-319-90163-3 (Print) 978-3-319-90165-7 (Online)

Ghorbani, Morteza (2018) Numerical study of cavitating flow in orifices and its effect on spray characteristics. Journal of Hydrodynamics, 30 (5). pp. 908-919. ISSN 1001-6058 (Print) 1878-0342 (Online)

Ghorbani, Morteza and Alcan, Gökhan and Khalili Sadaghiani, Abdolali and Mohammadi, Ali and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali (2018) Characterization and pressure drop correlation for sprays under the effect of micro scale cavitation. Experimental Thermal and Fluid Science, 91 . pp. 89-102. ISSN 0894-1777 (Print) 1879-2286 (Online)

Ghorbani, Morteza and Chen, Hongjian and Villanueva, Luis Guillermo and Grishenkov, Dmitry and Koşar, Ali (2018) Intensifying cavitating flows in microfluidic devices with poly(vinyl alcohol) (PVA) microbubbles. Physics of Fluids, 30 (10). ISSN 1070-6631 (Print) 1089-7666 (Online)

Ghorbani, Morteza and Khalili Sadaghiani, Abdolali and Villanueva, L. Guillermo and Koşar, Ali (2018) Hydrodynamic cavitation in microfluidic devices with roughened surfaces. Journal of Micromechanics and Microengineering, 28 (7). ISSN 0960-1317 (Print) 1361-6439 (Online)

Ghorbani, Morteza and Sözer, Canberk and Alcan, Gökhan and Ünel, Mustafa and Ekici, Sinan and Üvet, Hüseyin and Koşar, Ali (2018) Biomedical device prototype based on small scale hydrodynamic cavitation. AIP Advances, 8 (3). ISSN 2158-3226

Ghorbani, Morteza and Villanueva, Guillermo and Koşar, Ali (2018) An optimization study on thermal energy harvesting from micro cavitating flows. In: 6th Micro and Nano Flows Conference 2018, Atlanta, USA

Gilg, Brady and Klug, Torsten and Martienssen, Rosemarie and Paat, Joseph and Schlechte, Thomas and Schulz, Christof and Seymen, Senan and Tesch, Alexander (2018) Conflict-free railway track assignment at depots. Journal of Rail Transport Planning and Management, 8 (1). pp. 16-28. ISSN 2210-9706 (Print) 2210-9714 (Online)

Göğüş, Nihat Gökhan and Şahutoğlu, Sönmez (2018) Schatten class Hankel and (partial derivative)over-bar-Neumann operators on pseudoconvex domains in C-n. Monatshefte für Mathematik, 187 (2). pp. 237-245. ISSN 0026-9255 (Print) 1436-5081 (Online)

Gözüaçık, Devrim and Karakaş Schüller, Hacer Ezgi and Akkoç, Yunus and Özata, Başak (2018) Otofaji ve kanser (Autophagy and cancer). In: Baran, Yusuf, (ed.) Kanser Moleküler Biyolojisi. Kısayol Yayıncılık, Ankara, pp. 239-254. ISBN 9786052329306

Grujcic, Djordje and Drinic, Milanka and Zivanovic, Iva and Çakmak, İsmail and Singh, Bal Ram (2018) Micronutrient availability in soils of Northwest Bosnia and Herzegovina in relation to silage maize production. Acta Agriculturae Scandinavica, Section B - Soil and Plant Science, 68 (4). pp. 301-310. ISSN 0906-4710 (Print) 1651-1913 (Online)

Güçlü, Serkan and Sharabati, Jalal-Al-Din and Saffarimiandoab, Farzin and Ağtaş, Meltem and İmer, Derya Y. and Paşaoğlu, Mehmet E. and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) Investigation of pilot scale manufacturing of polysulfone (PSf) membranes by wet phase inversion method. Desalination and Water Treatment, 131 . pp. 66-74. ISSN 1944-3994 (Print) 1944-3986 (Online)

Güçlü, Utku (2018) Monitoring and identification of progressive damage in fiber reinforced composite structures using non-destructive testing. [Thesis]

Gül, Burçin (2018) Design and fabrication of silicone-based composite tissue-mimicking phantoms for medical training. [Thesis]

Gül, Burçin and Kılıç, Deniz and Bozkurt, Ayhan and Arıbal, Mustafa Erkin and Akbulut, Özge (2018) Silicone-based composite materials simulate breast tissue to be used as ultrasonography training phantoms. Ultrasonics, 88 . pp. 9-15. ISSN 0041-624X (Print) 1874-9968 (Online)

Güler, Alara (2018) Applications of Bayesian inference for the origin destination matrix problem. [Thesis]

Güler, Enver and Sadeghi, Sahl and Alkan Gürsel, Selmiye (2018) Characterization and fuel cell performance of divinylbenzene crosslinked phosphoric acid doped membranes based on 4-vinylpyridine grafting onto poly(ethylene-co-tetrafluoroethylene) films. International Journal of Hydrogen Energy, 43 (16). pp. 8088-8099. ISSN 0360-3199 (Print) 1879-3487 (Online)

Gülhan, Mehmet Mert (2018) Kinematic arrangement optimization of a quadruped robot with genetic algorithms. [Thesis]

Gülhan, Mehmet Mert and Erbatur, Kemalettin (2018) Kinematic arrangement optimization of a quadruped robot with genetic algorithms. Measurement and Control, 51 (9-10). pp. 406-416. ISSN 0020-2940 (Print) 2051-8730 (Online)

Güner, Alper (2018) Ka-band full duplex system with electrical balance duplexer for 5G applications using SiGe BiCMOS technology. [Thesis]

Güneri, Cem and Özdemir, Funda and Sole, Patrick (2018) On the additive cyclic structure of quasi-cyclic codes. Discrete Mathematics, 341 (10). pp. 2735-2741. ISSN 0012-365X (Print) 1872-681X (Online)

Güneri, Cem and Özkaya, Buket and Sayıcı, Selcen (2018) On linear complementary pair of nD cyclic codes. IEEE Communications Letters, 22 (12). pp. 2404-2406. ISSN 1089-7798 (Print) 1558-2558 (Online)

Gür, Kamil Doruk and Polyakov, Yuriy and Rohloff, Kurt and Ryan, Gerard W. and Savaş, Erkay (2018) Implementation and evaluation of improved Gaussian sampling for lattice trapdoors. In: 6th Annual Workshop on Encrypted Computing and Applied Homomorphic Cryptography. WAHC 208, co-located with CCS 2018, Toronto, Canada

Gürtan, Mert (2018) Kinematic and dynamic modeling of grinding processes. [Thesis]

Hacısalihoğlu, Gökhan and Burton, Amy L. and Gustin, Jeffery L. and Eker, Selim and Asıklı, Safiye and Heybet, Elif Haklı and Öztürk, Levent and Çakmak, İsmail and Yazıcı, Mustafa Atilla and Burkey, Kent O. and Orf, James and Settles, Mark A. (2018) Quantitative trait loci associated with soybean seed weight and composition under different phosphorus levels. Journal of Integrative Plant Biology, 60 (3). pp. 232-241. ISSN 1672-9072 (Print) 1744-7909 (Online)

Haghighi Poudeh, Leila (2018) Design and manufacturing of dimensionally controlled graphene based hybrid structures by core-shell electrospinning for energy storage systems. [Thesis]

Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying. ACS Omega, 3 (6). pp. 6400-6410. ISSN 2470-1343

Haghmoradi, Navid and Dehghanian, C. and Khanlarkhani, H. (2018) The correlation among deposition parameters, structure and corrosion behaviour of ZnNi/nano-SiC composite coating deposited by pulsed and pulsed reverse current. Transactions of the Institute of Metal Finishing, 96 (3). pp. 155-162. ISSN 0020-2967 (Print) 1745-9192 (Online)

Han, Y. and Siegel, J. B. and Rizzo, Denise M. and Yeşilyurt, Serhat (2018) Temperature and stress distributions in micro-tubular SOFC. In: European Hydrogen Energy Conference (EHEC 2018), Malaga, Spain

Hayat Soytaş, Serap and Oğuz, Oğuzhan and Menceloğlu, Yusuf Z. (2018) Polymer nanocomposites with decorated metal oxides. In: Pielichowski, Krzysztof and Majka, Tomasz, (eds.) Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications. Elsevier, United States, pp. 287-323. ISBN 9780128140642 (Print) 9780128140659 (Online)

Herrmann, Julien and Özkaya, M. Yusuf and Uçar, Bora and Kaya, Kamer and Çatalyürek, Ümit V. (2018) Acyclic partitioning of large directed acyclic graphs. [Working Paper / Technical Report] Sabanci University ID:9163

Hodaei, Amin (2018) A single additive for 3D printing of highly-concentrated iron oxide inks. [Thesis]

Hodaei, Amin and Akhlaghi Baghoojari, Omid and Khani, Navid and Aytaş, Tunahan and Sezer, Dilek and Tatlı, Buse and Menceloğlu, Yusuf Z. and Koç, Bahattin and Akbulut, Özge (2018) Single additive enables 3D printing of highly loaded iron oxide suspensions. ACS Applied Materials & Interfaces, 10 (11). pp. 9873-9881. ISSN 1944-8244 (Print) 1944-8252 (Online)

Hodaei, Amin and Dezfuli, Amin Shiralizadeh and Naderi, Hamid Reza (2018) A high-performance supercapacitor based on N-doped TiO2 nanoparticles. Journal of Materials Science: Materials in Electronics, 29 (17). pp. 14596-14604. ISSN 0957-4522 (Print) 1573-482X (Online)

Hussain, Babar (2018) Genetic and genomic architecture of salt tolerance in bread wheat. [Thesis]

Hussain, Babar and Lucas, Stuart J. and Budak, Hikmet (2018) CRISPR/Cas9 in plants: at play in the genome and at work for crop improvement. Briefings in Functional Genomics, 17 (5). pp. 319-328. ISSN 2041-2649 (Print) 2041-2657 (Online)

Inac, M. and Wietstruck, M. and Goritz, A. and Cetindogan, B. and Baristiran-Kaynak, C. and Lisker, M. and Kruger, A. and Trusch, A. and Saarow, U. and Heinrich, P. and Voss, T. and Kaynak, Mehmet (2018) Oxide surface roughness optimization of BiCMOS beol wafers for 200 mm wafer level microfluidic packaging based on fusion bonding. In: IEEE 19th Electronics Packaging Technology Conference (EPTC), Singapore

Işıkel Şanlı, Lale and Yarar Kaplan, Begüm and Bayram, Vildan and Alkan Gürsel, Selmiye (2018) Correction to: Electrosprayed catalyst layers based on graphene–carbon black hybrids for the next-generation fuel cell electrodes (Journal of Materials Science, (2017), 52, 4, (2091-2102), 10.1007/s10853-016-0497-0). Journal of Materials Science, 53 (20). p. 14884. ISSN 0022-2461 (Print) 1573-4803 (Online)

İlker, Efe and Madran, Melihat and Konuk, Mine and Durukanoǧlu, Sondan (2018) Growth and shape stability of Cu-Ni core-shell nanoparticles: an atomistic perspective. Chemical Communications, 54 (96). pp. 13583-13586. ISSN 1359-7345 (Print) 1364-548X (Online)

İzmirlioğlu, Yusuf and Erdem, Esra (2018) Qualitative reasoning about cardinal directions using answer set programming. In: 32nd AAAI Conference on Artificial Intelligence, AAAI 2018, New Orleans, US

Jahangiri, Sassan and Aravi, İpek and Işıkel Şanlı, Lale and Menceloğlu, Yusuf Z. and Özden Yenigün, Elif (2018) Fabrication and optimization of proton conductive polybenzimidazole electrospun nanofiber membranes. Polymers for Advanced Technologies, 29 (1). pp. 594-602. ISSN 1042-7147 (Print) 1099-1581 (Online)

Jamshidi, Hamid and Budak, Erhan (2018) Grinding temperature modeling based on a time dependent heat source. In: 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary

Janipour, Mohsen and Şendur, Kürşat (2018) Broadband infrared reflective surfaces using doped and stacked polar dielectric layers. AIP Advances, 8 (2). ISSN 2158-3226

Janipour, Mohsen and Şendur, Kürşat (2018) Temperature and pressure effects on the spectral reflection of layered polar dielectrics. Materials Research Express, 5 (11). ISSN 2053-1591

Javadi Khatab, Sonya (2018) On the end-of-life inventory problem. [Thesis]

Javanmardi, Mehran and Lanfredi, Ricardo Bigolin and Çetin, Müjdat and Taşdizen, Tolga (2018) Image segmentation by deep learning of disjunctive normal shape model shape representation. In: IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR), Salt Lake City, UT

Jedari Golparvar, Ata and Yapıcı, Murat Kaya (2018) Electrooculography by wearable graphene textiles. IEEE Sensors Journal, 18 (21). pp. 8971-8978. ISSN 1530-437X (Print) 1558-1748 (Online)

Jedari Golparvar, Ata and Yapıcı, Murat Kaya (2018) Graphene-coated wearable textiles for EOG-based human-computer interaction. In: IEEE 15th International Conference on Wearable and Implantable Body Sensor Networks (BSN 2018), Las Vegas, NV, USA

Kalalı, Ercan (2018) Low energy video processing and compression hardware designs. [Thesis]

Kalalı, Ercan and Adıbelli, Yusuf and Hamzaoğlu, İlker (2018) A low energy intra prediction hardware for high efficiency video coding. Journal of Real-Time Image Processing, 15 (2). pp. 221-234. ISSN 1861-8200 (Print) 1861-8219 (Online)

Kalalı, Ercan and Hamzaoğlu, İlker (2018) Approximate HEVC fractional interpolation filters and their hardware implementations. IEEE Transactions on Consumer Electronics, 64 (3). pp. 285-291. ISSN 0098-3063 (Print) 1558-4127 (Online)

Kalaycı, Tekgül (2018) On factorization of some permutation polynomials over finite fields. [Thesis]

Kalemci, Emrah (2018) Summary of the past, present and future of the X-ray astronomy. European Physical Journal Plus, 133 (10). ISSN 2190-5444

Kalemci, Emrah and Maccarone, Thomas J. and Tomsick, John A. (2018) A dust-scattering halo of 4U 1630-47 observed with chandra and swift: new constraints on the source distance. Astrophysical Journal, 859 (2). ISSN 0004-637X (Print) 1538-4357 (Online)

Kaneko Göğüş, Yuki and Bakkal, Emine Süphan and Sayers, Zehra (2018) Active learning in university: an approach to a freshman science course. In: 46th SEFI Annual Conference 2018, Copenhagen, Denmark

Kaplan, Emre and Gürsoy, Mehmet Emre and Nergiz, Mehmet Ercan and Saygın, Yücel (2018) Location disclosure risks of releasing trajectory distances. Data and Knowledge Engineering, 113 . pp. 43-63. ISSN 0169-023X (Print) 1872-6933 (Online)

Kaporo, Hemed Hamisi (2018) Cross collection aspect based opinion mining using topic models. [Thesis]

Kara, Özdemir Can (2018) Design of a stylus with variable tip compliance. [Thesis]

Karadeniz Alver, Özlem (2018) A Multi-criteria reverse logistics network design for waste electrical and electronic equipments. [Thesis]

Karadeniz Alver, Özlem and Ayvaz, Berk and Çatay, Bülent (2018) A multi-objective reverse logistics network design for waste electrical and electronic equipment: the case of Istanbul (Atık elektrikli ve elektronik eşyalar için çok amaçlı bir tersine lojistik ağ tasarımı: İstanbul uygulaması). Uludağ University Journal of The Faculty of Engineering, 23 (4). pp. 41-54. ISSN 2148-4147 (Print) 2148-4155 (Online)

Karadeniz Alver, Özlem and Ayvaz, Berk and Çatay, Bülent (2018) Elektrikli ve elektronik atıklar için tersine lojistik ağ tasarımı: İstanbul örneği. In: 7. Ulusal Lojistik ve Tedarik Zinciri Kongresi, Bursa, Türkiye

Karaguzel, Umut and Budak, Erhan (2018) Investigating effects of milling conditions on cutting temperatures through analytical and experimental methods. Journal of Materials Processing Technology, 262 . pp. 532-540. ISSN 0924-0136 (Print) 1873-4774 (Online)

Karahan, Özlem and Biçer, Emre and Taşdemir, Adnan and Yürüm, Alp and Alkan Gürsel, Selmiye (2018) Development of efficient copper-based MOF-derived catalysts for the reduction of aromatic nitro compounds. European Journal of Inorganic Chemistry, 9 . pp. 1073-1079. ISSN 1434-1948 (Print) 1099-0682 (Online)

Karahoda, Sertaç (2018) Algorithmic optimization and parallelization of eppstein's synchronizing heuristic. [Thesis]

Karahoda, Sertaç and Kaya, Kamer and Yenigün, Hüsnü (2018) Synchronizing heuristics: speeding up the fastest. Expert Systems with Applications, 94 . pp. 265-275. ISSN 0957-4174 (Print) 1873-6793 (Online)

Karakaş, Bahriye and Özmay, Yeliz and Başağa, Hüveyda and Gül, Özgür and Kütük, Özgür (2018) Distinct apoptotic blocks mediate resistance to panHER inhibitors in HER2+breast cancer cells. Biochimica et Biophysica Acta (BBA) - Molecular Cell Research, 1865 (8). pp. 1073-1087. ISSN 0167-4889 (Print) 0006-3002 (Online)

Karakaş, Vedat and Gökçe, Aisha and Habiboğlu, Ali Taha and Arpacı, Sevdenur and Özbozduman, Kaan and Çınar, İbrahim and Yanık, Cenk and Tomasello, Ricardo and Tacchi, Silvia and Siracusano, Giulio and Carpentieri, Mario and Finocchio, Giovanni and Hauet, Thomas and Özatay, Özhan (2018) Observation of magnetic radial vortex nucleation in a multilayer stack with tunable anisotropy. Scientific Reports, 8 (1). ISSN 2045-2322

Karamahmutoğlu, Hande and Çetin, Metin and Yağcı, Tamer and Elitaş, Meltem (2018) Behavior of HepG2 liver cancer cells using microfluidic-microscopy: a preliminary study. In: Microfluidics, BioMEMS, and Medical Microsystems XVI, San Francisco, USA

Karataş, Sevde Nur (2018) Designing selective small molecule inhibitor screening through BH3 profiling. [Thesis]

Kari, Dariush and Mirza, Ali H. and Khan, Farhan and Özkan, Hüseyin and Kozat, Süleyman S. (2018) Boosted adaptive filters. Digital Signal Processing, 81 . pp. 61-78. ISSN 1051-2004 (Print) 1095-4333 (Online)

Karimzadehkhouei, Mehrdad and Shojaeian, Mostafa and Khalili Sadaghiani, Abdolali and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2018) Entropy generation analysis of laminar flows of water-based nanofluids in horizontal minitubes under constant heat flux conditions. Entropy, 20 (4). ISSN 1099-4300

Kasap, Sibel and Kaya, İsmet İnönü (2018) γ-Fe2O3 nanoparçacık katkılı üç boyutlu grafen köpüklerin üretimi ve karakterizasyonu. Dokuz Eylül Üniversitesi Mühendislik Fakültesi - Fen ve Mühendislik Dergisi, 20 (60). pp. 743-754. ISSN 1302-9304 (Print) 2547-958X (Online)

Kaya, Cengiz and Avcıoğlu, Suna and Kaya, Figen (2018) Low temperature synthesis and characterization of high purity nano boron carbide (B4C) structures. In: IV. International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress (SERES'18), Eskisehir, Turkey

Kaya, Erdem and Alacam, Sema and Fındık, Yasin and Balcısoy, Selim (2018) Low-fidelity prototyping with simple collaborative tabletop computer-aided design systems. Computers & Graphics (SI), 70 . pp. 307-315. ISSN 0097-8493 (Print) 1873-7684 (Online)

Kaya, Erdem and Dong, Xiaowen and Suhara, Yoshihiko and Balcısoy, Selim and Bozkaya, Burçin and Pentland, Alex Sandy (2018) Behavioral attributes and financial churn prediction. EPJ Data Science, 7 (1). ISSN 2193-1127 (Print) 2193-1127 (Online)

Kaya, Kamer and Birbil, Ş. İlker and Öztürk, Mehmet Kaan and Emami Gohari, Amir (2018) Parallelized preconditioned model building algorithm for matrix factorization. In: 3rd International Conference on Machine Learning, Optimization, and Big Data, MOD 2017, Volterra, Italy

Kayıkçı, Yaşanur and Mutlu, Aysun and Çatay, Bülent (2018) A decision support system and its application for international sea-rail multimodal freight transportation operations (Uluslararası deniz-demir yolu kombine yük taşımacılığı operasyonları için bir karar destek sistemi ve uygulaması). Uludağ University Journal of The Faculty of Engineering, 23 (4). pp. 99-116. ISSN 2148-4147 (Print) 2148-4155 (Online)

Kaynak, C. Baristiran and Yamamoto, Y. and Göritz, A. and Korndörfera, F. and Zaumseil, P. and Kulse, P. and Schulz, K. and Wietstruck, M. and Costina, I. and Shafique, Atia and Gürbüz, Yaşar and Kaynak, Mehmet (2018) Pixel resistance optimization of a Si0.5Ge0.5/Si MQWs thermistor based on in-situ B doping for microbolometer applications. In: Infrared Technology and Applications XLIV 2018, Orlando, FL, USA

Kazemy, Omid Khorsand (2018) Hybrid generalized multi-agent pathfinding: a hierarchical method using ASP. [Thesis]

Keçebaş, Muhammed Ali and Şendur, Kürşat (2018) Enhancing the spectral reflectance of refractory metals by multilayer optical thin-film coatings. Journal of the Optical Society of America B, 35 (8). pp. 1845-1853. ISSN 0740-3224 (Print) 1520-8540 (Online)

Kefal, Adnan and Haşim, Ahmet Kazım and Yıldız, Mehmet (2018) Isogeometric analysis of moderately thick composite beams and plates based on refined zigzag theory. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology. Ocean Engineering, 147 . pp. 256-267. ISSN 0029-8018

Kefal, Adnan and Sohouli, A. and Öterkuş, E. and Yıldız, Mehmet and Suleman, A. (2018) Topology optimization of cracked structures using peridynamics. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Keskin Özel, Merve (2018) Recharge strategies for the electric vehicle routing problem with time windows in deterministic and stochastic environments. [Thesis]

Keskin Özel, Merve and Çatay, Bülent (2018) A matheuristic method for the electric vehicle routing problem with time windows and fast chargers. Computers and Operations Research, 100 . pp. 172-188. ISSN 0305-0548 (Print) 1873-765X (Online)

Keskin Özel, Merve and Laporte, Gilbert and Çatay, Bülent (2018) Electric vehicle routing problem with time dependent waiting times at recharging stations. In: 7th International Workshop on Freight Transportation and Logistics (ODYSSEUS 2018), Cagliari, Italy

Khaksaran, Mohammad Hadi and Kaya, İsmet İnönü (2018) Spontaneous nucleation and growth of graphene flakes on copper foil in the absence of external carbon precursor in chemical vapor deposition. ACS Omega, 3 (10). pp. 12575-12583. ISSN 2470-1343

Khalid, Maria and Khalid, Zoya and Gul, Alvina and Amir, Rabia and Ahmad, Zubair (2018) Characterization of wheat cell wall invertase genes associated with drought tolerance in synthetic-derived wheat. International Journal of Agriculture and Biology, 20 (12). pp. 2677-2684. ISSN 1560-8530 (Print) 1814-9596 (Online)

Khalid, Zoya and Sezerman, Osman Ugur (2018) Computational drug repurposing to predict approved and novel drug-disease associations. Journal of Molecular Graphics and Modelling, 85 . pp. 91-96. ISSN 1093-3263 (Print) 1873-4243 (Online)

Khalid, Zoya and Sezerman, Osman Ugur (2018) Prediction of HIV drug resistance by combining sequence and structural properties. IEEE/ACM Transactions on Computational Biology and Bioinformatics, 15 (3). pp. 966-973. ISSN 1545-5963 (Print) 1557-9964 (Online)

Khalili Sadaghiani, Abdolali and Koşar, Ali (2018) Numerical investigations on the effect of fin shape and surface roughness on hydrothermal characteristics of slip flows in microchannels with pin fins. International Journal of Thermal Sciences, 124 . pp. 375-386. ISSN 1290-0729 (Print) 1778-4166 (Online)

Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Kasap, Sibel and Kaya, İsmet İnönü and Koşar, Ali (2018) Foamlike 3D graphene coatings for cooling systems involving phase change. ACS Omega, 3 (3). pp. 2804-2811. ISSN 2470-1343

Khan, Zaeema (2018) Brachypodium distachyon seedling growth visualization under osmotic stress and overexpression of MIR7757 to increase drought tolerance. [Thesis]

Khorsand Kheirabad, Atefeh (2018) Synthesis and characterization of self-crosslinking polyurethanes and their waterborne dispersions. [Thesis]

Khwaja, Ahmed Shaharyar and Çetin, Müjdat (2018) Sparse 4D TomoSAR imaging in the presence of non-linear deformation. In: Algorithms for Synthetic Aperture Radar Imagery XXV 2018, Orlando, FL, USA

Kılıç Kurt, Zuhal and Bakar Ateş, Filiz and Karakaş, Bahriye and Kütük, Özgür (2018) Cytotoxic and apoptotic effects of novel pyrrolo[2,3-d]pyrimidine derivatives containing urea moieties on cancer cell lines. Anti-Cancer Agents in Medicinal Chemistry, 18 (9). pp. 1303-1312. ISSN 1871-5206 (Print) 1875-5992 (Online)

Knijnenburg, Jesper T. N. and Hilty, Florentine M. and Oelofse, Janro and Buitendag, Riaan and Zimmermann, Michael B. and Çakmak, İsmail and Grobler, Anne F. (2018) Nano- and Pheroid technologies for development of foliar iron fertilizers and iron biofortification of soybean grown in South Africa. Chemical and Biological Technologies in Agriculture, 5 (1). ISSN 2196-5641

Koca, Çağla (2018) An FPGA based approach for Černý conjecture falsification. [Thesis]

Koca, Esra and Yaman, Hande and Aktürk, M. Selim (2018) Stochastic lot sizing problem with nervousness considerations. Computers and Operations Research, 94 . pp. 23-37. ISSN 0305-0548 (Print) 1873-765X (Online)

Kocaman, Esat Selim and Yılmaz, Çağatay and Deniz, Ataman and Yıldız, Mehmet (2018) The performance of embedded fiber Bragg grating sensors for monitoring failure modes of foam cored sandwich structures under flexural loads. Journal of Sandwich Structures and Materials, 20 (5). pp. 553-577. ISSN 1099-6362 (Print) 1530-7972 (Online)

Kocatuğ, Nazlı (2018) Computational assessment of the effect of allosteric mutations on the dynamics of PDZ domains. [Thesis]

Kocatürk, Nur Mehpare (2018) Cross-link between the ubiquitin-proteasome system (UPS) and autophagy in the regulation of mitophagy. [Thesis]

Kocatürk, Nur Mehpare and Gözüaçık, Devrim (2018) Crosstalk between mammalian autophagy and the ubiquitin-proteasome system. Frontiers in Cell and Developmental Biology, 6 . ISSN 2296-634X

Kocuk, Burak and Dey, Santanu S. and Andy, X. Sun (2018) Matrix minor reformulation and SOCP-based spatial branch-and-cut method for the AC optimal power flow problem. Mathematical Programming Computation, 10 (4). pp. 557-596. ISSN 1867-2949 (Print) 1867-2957 (Online)

Koç, Uğur and Yılmaz, Cemal (2018) Approaches for computing test-case-aware covering arrays. Software Testing, Verification and Reliability, 28 (7). ISSN 0960-0833 (Print) 1099-1689 (Online)

Koçak, Muhammed (2018) Development of protein-conjugated spion-based theranostic nanoparticles as small rna gene therapy vehicles in cancer treatment. [Thesis]

Koçhan, Didem (2018) Scalable Monte Carlo inference in regression models with missing data. [Thesis]

Kolak, Orhan İlker and Feyzioğlu, Orhan and Noyan, Nilay (2018) Bi-level multi-objective traffic network optimisation with sustainability perspective. Expert Systems with Applications, 104 . pp. 294-306. ISSN 0957-4174 (Print) 1873-6793 (Online)

Koohestani, Babak and Khodadadi Darban, Ahmad and Darezereshkia, Esmaeel and Mokhtari, Pozhhan and Yılmaz, Erol and Yılmaz, Elif (2018) The influence of sodium and sulfate ions on total solidification and encapsulation potential of iron-rich acid mine drainage in silica gel. Journal of Environmental Chemical Engineering, 6 (2). pp. 3520-3527. ISSN 2213-3437 (Print) 2213-2929 (Online)

Koohestani, Babak and Khodadadi Darban, Ahmad and Mokhtari, Pozhhan (2018) A comparison between the influence of superplasticizer and organosilanes on different properties of cemented paste backfill. Construction and Building Materials, 173 . pp. 180-188. ISSN 0950-0618 (Print) 1879-0526 (Online)

Koohestani, Babak and Khodadadi Darban, Ahmad and Yılmaz, Erol and Mokhtari, Pozhhan and Ganetri, Ikram (2018) Influence of amine and vinyl functional groups of silanes on total performance of thermoplastic-based composites. Construction and Building Materials, 172 . pp. 98-105. ISSN 0950-0618 (Print) 1879-0526 (Online)

Kumar, Baskaran Ganesh and Sadeghi, Sadra and Melikov, Rustamzhon and Mohammadi Aria, Mohammad and Bahmani Jalali, Houman and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) Structural control of InP/ZnS core/shell quantum dots enables high-quality white LEDs. Nanotechnology, 29 (34). ISSN 0957-4484 (Print) 1361-6528 (Online)

Kus Khalilov, Merve Can and Levi, Albert (2018) A survey on anonymity and privacy in bitcoin-like digital cash systems. IEEE Communications Surveys & Tutorials, 20 (3). pp. 2543-2585. ISSN 1553-877X

Kutlu, Özlem and Kaleli, Hümeyra Nur and Özer, Ebru (2018) Molecular pathogenesis of nonalcoholic steatohepatitis- (NASH-) related hepatocellular carcinoma. Canadian Journal of Gastroenterology and Hepatology, 2018 . ISSN 2291-2789 (Print) 2291-2797 (Online)

Kuzu, Ahmet and Baran, Eray A. and Bogosyan, Seta and Gökaşan, Metin and Şabanoviç, Asif (2018) Improved bilateral teleoperation with proactive haptic sensing and transmission. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 232 (1). pp. 79-91. ISSN 0959-6518 (Print) 2041-3041 (Online)

Küçüksayacıgil, Fikri and Ulusoy, Gündüz (2018) A hybrid genetic algorithm application for a bi-objective, multi-project, multi-mode, resource-constrained project scheduling problem. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Levanyuk, Arkadi P. and Minyukov, Sergey A. and Mısırlıoğlu, Burç (2018) Loss of elastic stability and formation of inhomogeneous states at phase transitions in thin films on substrates. Ferroelectrics, 533 (1). pp. 1-9. ISSN 0015-0193 (Print) 1563-5112 (Online)

Liu, Gökşin and Atılgan, Canan and Sayers, Zehra (2018) Structural characterization of haemophilus influenzae ferric bindind protein in different environmental conditions. In: XVII International Small Angle Scattering Conference - SAS2018, Traverse City, Michigan

Liu, Yuqiao and Bshara, Oday and Tekin, İbrahim and Dandekar, Kapil R. (2018) A 4 by 10 series 60 GHz microstrip array antenna fed by Butler matrix for 5G applications. In: IEEE 19th Wireless and Microwave Technology Conference (WAMICON), Florida, USA

Lucas, Stuart J. and Sezer, A. and Boztepe, Ö. and Kahraman, Kadriye and Budak, Hikmet (2018) Genetic analysis of powdery mildew disease in Turkish hazelnut. In: IX International Congress on Hazelnut, Atakum, Samsun, Turkey

Madenci, Erdoğan and Kefal, Adnan and Dördüncü, Mehmet and Barut, Atila and Yıldız, Mehmet (2018) Isogeometric analysis using peridynamics and XFEM. In: 59th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Kissimmee, USA

Manda, Gina and Hinescu, Mihail E. and Neagoe, Ionela V. and Ferreira, Luis F. V. and Boscencu, Rica and Vasos, Paul and Başağa, Hüveyda and Cuadrado, Antonio (2018) Emerging therapeutic targets in oncologic photodynamic therapy. Current Pharmaceutical Design, 24 (44). pp. 5268-5295. ISSN 1381-6128 (Print) 1873-4286 (Online)

Mehraeen, Shayan (2018) Bending actuators based on ionic electroactive polymers. [Thesis]

Mehraeen, Shayan and Sadeghi, Sahl and Cebeci, Fevzi Çakmak and Papila, Melih and Alkan Gürsel, Selmiye (2018) Polyvinylidene fluoride grafted poly(styrene sulfonic acid) as ionic polymer-metal composite actuator. Sensors and Actuators A: Physical, 279 . pp. 157-167. ISSN 0924-4247

Mehraeen, Shayan and Taşdemir, Adnan and Alkan Gürsel, Selmiye and Yürüm, Alp (2018) Homogeneous growth of TiO2-based nanotubes on nitrogen-doped reduced graphene oxide and its enhanced performance as a Li-ion battery anode. Nanotechnology, 29 (25). ISSN 0957-4484 (Print) 1361-6528 (Online)

Mehrtash, Mehdi and Tari, İlker and Yeşilyurt, Serhat (2018) Numerical modeling of visco-elasto-plastic hygro-thermal stresses and the effects of operating conditions on the mechanical degradation of PEFC membranes. Journal of Power Sources, 396 . pp. 164-174. ISSN 0378-7753 (Print) 1873-2755 (Online)

Mercan, Hanefi and Kaya, Kamer and Yılmaz, Cemal (2018) Enumerator: an efficient approach for enumerating all valid t-tuples. In: 11th IEEE International Conference on Software Testing, Verification and Validation Workshops (ICSTW 2018), Vasteras, Sweden

Mercan, Safiye Canset (2018) A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response. [Thesis]

Mert, Ahmet Can and Azgın, Hasan and Kalalı, Ercan and Hamzaoğlu, İlker (2018) Efficient multiple constant multiplication using DSP blocks in FPGA. In: 28th International Conference on Field Programmable Logic and Applications (FPL), Dublin, Ireland

Mert, Ahmet Can and Kalalı, Ercan and Hamzaoğlu, İlker (2018) A low power versatile video coding (VVC) fractional interpolation hardware. In: 12th Conference on Design and Architectures for Signal and Image Processing (DASIP), Porto, Portugal

Mert, Ahmet Can and Kalalı, Ercan and Hamzaoğlu, İlker (2018) An HEVC fractional interpolation hardware using memory based constant multiplication. In: IEEE International Conference on Consumer Electronics (ICCE 2018), Las Vegas, NV, USA

Mesadi, Fitsum and Erdil, Ertunç and Çetin, Müjdat and Taşdizen, Tolga (2018) Image segmentation using disjunctive normal Bayesian shape and appearance models. IEEE Transactions on Medical Imaging, 37 (1). pp. 293-305. ISSN 0278-0062 (Print) 1558-254X (Online)

Mohammad, Akbar and Ahmad, Khursheed and Qureshi, Anjum and Tauqeer, Mohd and Mobin, Shaikh M. (2018) Zinc oxide-graphitic carbon nitride nanohybrid as an efficient electrochemical sensor and photocatalyst. Sensors and Actuators B: Chemical, 277 . pp. 467-476. ISSN 0925-4005

Mohammad Moradi, Omid and Şen, Canhan and Boni, A. G. and Pintilie, L. and Mısırlıoğlu, Burç (2018) Strong composition dependence of resistive switching in Ba1-xSrxTiO3 thin films on semiconducting substrates and its thermodynamic analysis. Acta Materialia, 148 . pp. 419-431. ISSN 1359-6454 (Print) 1873-2453 (Online)

Mohammadi, Ali and Koşar, Ali (2018) Review on heat and fluid flow in micro pin fin heat sinks under single-phase and two-phase flow conditions. Nanoscale and Microscale Thermophysical Engineering, 22 (3). pp. 153-197. ISSN 1556-7265 (Print) 1556-7273 (Online)

Mohammadi, Yaser and Azvar, Milad and Budak, Erhan (2018) Suppressing vibration modes of spindle-holder-tool assembly through FRF modification for enhanced chatter stability. CIRP Annals - Manufacturing Technology, 67 (1). pp. 397-400. ISSN 0007-8506 (Print) 1726-0604 (Online)

Motezakker, Ahmad Reza (2018) Phase change heat transfer on micro/nano structured enhanced surfaces. [Thesis]

Mumcuyan, Aras and Usta, Baran and Kaya, Kamer and Yenigün, Hüsnü (2018) Optimally bipartitioning sparse matrices with reordering and parallelization. Concurrency and Computation: Practice and Experience (SI), 30 (21). ISSN 1532-0626 (Print) 1532-0634 (Online)

Muslu, Batin and Oztoprak, Burak and Baran, Eray A. and Şabanoviç, Asif (2018) Robust motion modification for robot manipulators in constrained environments. In: 6th International Conference on Control Engineering & Information Technology (CEIT), Istanbul, Turkey

Musul, Biran (2018) The role of tumor stroma and cancer associated fibroblasts in tumor growth through cytokines. [Thesis]

Muter, İbrahim and Birbil, Ş. İlker and Bülbül, Kerem (2018) Benders decomposition and column-and-row generation for solving large-scale linear programs with column-dependent-rows. European Journal of Operational Research, 264 (1). pp. 29-45. ISSN 0377-2217 (Print) 1872-6860 (Online)

Mutlu, Aysun (2018) Revenue-driven dynamic pricing and operational planning in multimodal freight transportation. [Thesis]

Mutlu, Aysun and Kayıkçı, Yaşanur and Çatay, Bülent (2018) Deniz-demir yolu uluslararası kombine yük taşımacılığı operasyonları için karar destek sistemi. In: 7. Ulusal Lojistik ve Tedarik Zinciri Kongresi, Bursa, Türkiye

Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Koç, Bahattin (2018) Nanocomposite hydrogels of agarose/nanosilicates for 3D bioprinting applications. In: Biofabrication Conference 2018, Wurzberg, Germany

Nar, Fatih and Okman, Osman Erman and Özgür, Atilla and Çetin, Müjdat (2018) Fast target detection in radar images using Rayleigh mixtures and summed area tables. Digital Signal Processing (SI), 77 . pp. 86-101. ISSN 1051-2004 (Print) 1095-4333 (Online)

Nar, Fatih and Okman, Osman Erman and Özgür, Atilla and Çetin, Müjdat (2018) RmSAT-CFAR: fast and accurate target detection in radar images. SoftwareX (SI), 8 . pp. 39-42. ISSN 2352-7110

Nawaz, Haq and Gürbüz, Özgür and Tekin, İbrahim (2018) High isolation slot coupled antenna with integrated tunable self-interference cancellation circuitry. Electronics Letters, 54 (23). pp. 1311-1312. ISSN 0013-5194 (Print) 1350-911X (Online)

Nawaz, Haq and Tekin, İbrahim (2018) Design, implementation and experimental comparison between two dual polarized 2.4GHz microstrip patch antennas. In: Second International Balkan Conference on Communications and Networking (BalkanCom 2018), Podgorica, Montenegro

Nawaz, Haq and Tekin, İbrahim (2018) Double-differential-fed, dual-polarized patch antenna with 90 dB interport RF isolation for a 2.4 GHz in-band full-duplex transceiver. IEEE Antennas and Wireless Propagation Letters, 17 (2). pp. 287-290. ISSN 1536-1225 (Print) 1548-5757 (Online)

Niazi, Sarfaraz and Purohit, Madhusudan and Sonawani, Archana and Kolkar Mohammed, Javed Hussain Niazi (2018) Revealing the molecular interactions of aptamers that specifically bind to the extracellular domain of HER2 cancer biomarker protein: an in silico assessment. Journal of Molecular Graphics and Modelling, 83 . pp. 112-121. ISSN 1093-3263 (Print) 1873-4243 (Online)

Nouman, Ahmed (2018) Hybrid conditional planning for service robotics. [Thesis]

Nouman, Ahmed and Erdem, Esra and Patoğlu, Volkan (2018) Solving the kitchen benchmark using HCplan. In: RSS Workshop on Exhibition and Benchmarking of Task and Motion Planners, USA

Noyan, Nilay (2018) Risk-averse stochastic modeling and optimization. In: Gel, Esma and NTAIMO, LEWIS, (eds.) Recent Advances in Optimization and Modeling of Contemporary Problems. INFORMS (Institute for Operations Research and Management Sciences), Catonsville, MD, USA, pp. 221-254. ISBN 978-0-9906153-2-3

Noyan, Nilay and Kahvecioğlu, Gökçe (2018) Stochastic last mile relief network design with resource reallocation. OR Spectrum, 40 (1). pp. 187-231. ISSN 0171-6468 (Print) 1436-6304 (Online)

Noyan, Nilay and Rudolf, Gabor (2018) Optimization with stochastic preferences based on a general class of scalarization functions. Operations Research, 66 (2). pp. 463-486. ISSN 0030-364X (Print) 1526-5463 (Online)

Oğuz, Oğuzhan and Seyyed Monfared Zanjani, Jamal and Hayat Soytaş, Serap and Menceloğlu, Yusuf Z. (2018) Specific interactions and self-organization in polymer: functionalized nanoparticle systems. In: Pielichowski, Krzysztof and Majka, Tomasz, (eds.) Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications. Elsevier, United States, pp. 85-117. ISBN 9780128140642 (Print) 9780128140659 (Online)

Oğuz, Oğuzhan and Şimşek, Eren and Kosak Soz, Çağla and Heinz, Özge and Yilgor, Emel and Yilgor, İskender and Menceloğlu, Yusuf Z. (2018) Effect of filler content on the structure-property behavior of poly(ethylene oxide) based polyurethaneurea-silica nanocomposites. Polymer Engineering and Science, 58 (7). pp. 1097-1107. ISSN 0032-3888 (Print) 1548-2634 (Online)

Olgun, Gülden and Şahin, Özgür and Taştan, Öznur (2018) Discovering lncRNA mediated sponge interactions in breast cancer molecular subtypes. BMC Genomics, 19 (1). ISSN 1471-2164 (Print) 1471-2164 (Online)

Ormancı-Acar, Türkan and Çelebi, Ferda and Keskin, Başak and Mutlu-Salmanlı, Öykü and Agtas, Meltem and Turken, Türker and Tufani, Ali and İmer, Derya Y. and Özaydın İnce, Gözde and Uçar Demir, Tuğba and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection. Desalination, 429 . pp. 20-32. ISSN 0011-9164 (Print) 1873-4464 (Online)

Oruç, Betül (2018) Carbon nanotube based hybrid nanostructures as photothermal antimicrobial nanomaterials. [Thesis]

Oruç, Betül and Çelik, Süleyman and Hayat Soytaş, Serap and Ünal, Hayriye (2018) DNA directed self-assembly of single walled carbon nanotubes into three-way junction nanostructures. ACS Omega, 3 (4). pp. 4157-4162. ISSN 2470-1343

Otaran, Ata and Tokatlı, Ozan and Patoğlu, Volkan (2018) HandsOn-computing: promoting algorithmic thinking through haptic educational robots. In: 11th International Conference on Haptics: Science, Technology, and Applications, EuroHaptics 2018, Pisa, Italy

Ozbulut, M. and Tofighi, N. and Goren, O. and Yıldız, Mehmet (2018) Investigation of wave characteristics in oscillatory motion of partially filled rectangular tanks. Journal of Fluids Engineering, Transactions of the ASME, 140 (4). ISSN 0098-2202 (Print) 1528-901X (Online)

Ozdemir, F. B. and Selcuk, A. B. and Ozkorucuklu, S. and Alpat, Ali Behçet and Ozdemir, T. and Ӧzek, N. (2018) Simulation and experimental measurement of radon activity using a multichannel silicon-based radiation detector. Applied Radiation and Isotopes, 135 . pp. 61-66. ISSN 0969-8043 (Print) 1872-9800 (Online)

Ozsoy, Emre and Padmanaban, Sanjeevikumar and Ahmad, Fiaz and Mihet-Popa, Lucian and Colak, Ilhami (2018) Modified SEPIC boost converter with constant switching frequency modulation using sliding mode controller. In: IEEE International Conference on Industrial Technology (ICIT), Lyon, France

Ozsoy, Emre and Soner, Burak and Ahmad, Fiaz and Rasool, Akhtar and Şabanoviç, Asif and Gokasan, Metin and Bogosyan, Seta and Sanjeevikumar, P. (2018) Disturbance observer based power control of DFIG under unbalanced network conditions. Electric Power Components and Systems, 46 (13). pp. 1448-1461. ISSN 1532-5008 (Print) 1532-5016 (Online)

Oztoprak, Burak and Baran, Eray A. and Şabanoviç, Asif (2018) Bilateral control with continuously variable scaling. In: 6th International Conference on Control Engineering & Information Technology (CEIT), Istanbul, Turkey

Önal, Ege Can and Ersen, Enver and Elitaş, Meltem (2018) Low-cost, robotic-assisted laparoscope. In: ICME 2018: 20th International Conference on Medical Engineering, Venice (Accepted)

Özbey, Arzu and Karimzadehkhouei, Mehrdad and Alijani Alijanvand, Hossein and Koşar, Ali (2018) Microparticle inertial focusing in an asymmetric curved microchannel. Fluids, 3 (3). ISSN 2311-5521

Özbey, Arzu and Karimzadehkhouei, Mehrdad and Bayrak, Özgecan and Koşar, Ali (2018) Inertial focusing of microparticles in curvilinear microchannels with different curvature angles. Microfluidics and Nanofluidics, 22 (6). ISSN 1613-4982 (Print) 1613-4990 (Online)

Özcan, Meriç and Sardari Ghojehbeiglou, Behzad (2018) Broadband and high-resolution static fourier transform spectrometer with bandpass sampling. Applied Spectroscopy, 72 (7). pp. 1116-1121. ISSN 0003-7028 (Print) 1943-3530 (Online)

Özcan, Yiğit (2018) Analytical modeling of kerf profile for 3-axis abrasive waterjet machining (AWJM). [Thesis]

Özcan, Yiğit and Tunç, Lütfi Taner (2018) Investigation of surface mophology and integrity in multi axis abrasive waterjet machining (AWJM). In: International Symposium on Machining, Antalya, Turkey

Özdemir, Ece and Özer, Berk and Deprem, Gökberk and Motezakker, Ahmad Reza and Villanueva, Luis Guillermo and Ghorbani, Morteza and Koşar, Ali (2018) Hysteresis in cavitating flows within transparent microchips. In: Cav2018, USA (Accepted)

Özdemir, Mehmed Rafet and Sadaghiani, Abdolali Khalili and Motezakker, Ahmad Reza and Parapari, Sorour Semsari and Park, Hyun Sun and Acar, Havva Yağcı and Koşar, Ali (2018) Experimental studies on ferrofluid pool boiling in the presence of external magnetic force. Applied Thermal Engineering, 139 . pp. 598-608. ISSN 1359-4311 (Print) 1873-5606 (Online)

Özden, İpeknaz (2018) Decellularized extracellular matrix-agarose hybrid bioink development for 3D bioprinting applications. [Thesis]

Özfatura, Emre and Rarris, Thomas and Gündüz, Deniz and Erçetin, Özgür (2018) Delay-aware coded caching for mobile users. In: 29th IEEE Annual International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC), Bologna, Italy

Özfatura, Mehmet Emre and Erçetin, Özgür and İnaltekin, Hazer (2018) Optimal network-assisted multiuser DASH video streaming. IEEE Transactions on Broadcasting, 64 (2). pp. 247-265. ISSN 0018-9316 (Print) 1557-9611 (Online)

Özgürün, Baturay (2018) A simple and low cost structured illumination microscopy using a pico-projector. In: Conference on Single Molecule Spectroscopy and Superresolution Imaging XI, San Francisco, CA

Öztoprak, Figen and Birbil, Ş. İlker (2018) An alternative globalization strategy for unconstrained optimization. Optimization, 67 (3). pp. 377-392. ISSN 0233-1934 (Print) 1029-4945 (Online)

Pacholski, M. J. and Beenakker, C. W. J. and Adagideli, İnanç (2018) Topologically protected Landau level in the vortex lattice of a weyl superconductor. Physical Review Letters, 121 (3). ISSN 0031-9007 (Print) 1079-7114 (Online)

Papila, Melih (2018) Design of and with thin-ply non-crimp fabric as building blocks for composites. Science and Engineering of Composite Materials, 25 (3). pp. 501-516. ISSN 0792-1233 (Print) 2191-0359 (Online)

Park, J. S. and Yildizli, K. and Demir, Eralp and Dawson, P. R. and Miller, M. P. (2018) Non-destructive characterization of subsurface residual stress fields and correlation with microstructural conditions in a shot-peened inconel component. Experimental Mechanics, 58 (9). pp. 1389-1406. ISSN 0014-4851 (Print) 1741-2765 (Online)

Penkler, David L. and Atılgan, Canan and Taştan Bishop, Özlem (2018) Allosteric modulation of human Hsp90α conformational dynamics. Journal of Chemical Information and Modeling, 58 (2). pp. 383-404. ISSN 1549-9596 (Print) 1549-960X (Online)

Phuphong, Piyawan and Çakmak, İsmail and Dell, Bernard and Prom-u-thai, Chanakan (2018) Effects of foliar application of zinc on grain yield and zinc concentration of rice in farmers' fields. Chiang Mai University Journal of Natural Sciences, 17 (3). pp. 181-190. ISSN 1685-1994

Posselt, B. and Pavlov, G. G. and Ertan, Ünal and Kaya, Şirin and Luhman, K. L. and Williams, C. C. (2018) Discovery of extended infrared emission around the neutron star RXJ0806.4-4123. Astrophysical Journal, 865 (1). ISSN 0004-637X (Print) 1538-4357 (Online)

Rabiger, Stefan (2018) Analyzing crowd workers' learning behavior to obtain more reliable labels. [Thesis]

Rabiger, Stefan and Gezici, Gizem and Saygın, Yücel and Spiliopoulou, Myra (2018) Predicting worker disagreement for more effective crowd labeling. In: 5th IEEE International Conference on Data Science and Advanced Analytics (IEEE DSAA), Turin, Italy

Rabiger, Stefan and Spiliopoulou, Myra and Saygın, Yücel (2018) How do annotators label short texts? toward understanding the temporal dynamics of tweet labeling. Information Sciences, 457 . pp. 29-47. ISSN 0020-0255 (Print) 1872-6291 (Online)

Rada, Lavdie and Kılıç, Bike and Erdil, Ertunç and Ramiro-Cortes, Yasmin and Israely, Inbal and Ünay, Devrim and Çetin, Müjdat and Argunşah, Ali Özgür (2018) Tracking-assisted detection of dendritic spines in time-lapse microscopic images. Neuroscience, 394 . pp. 189-205. ISSN 0306-4522 (Print) 1873-7544 (Online)

Rahimi, Eesa and Şendur, Kürşat (2018) Chimera states in plasmonic nanoresonators. Photonics Research, 6 (5). pp. 427-433. ISSN 2327-9125

Rahimi, Eesa and Şendur, Kürşat (2018) Thermally controlled femtosecond pulse shaping using metasurface based optical filters. Nanophotonics, 7 (3). pp. 659-668. ISSN 2192-8606 (Print) 2192-8614 (Online)

Rahimzadeh Berenji, Kaveh and Kara, Mehmet Emre and Budak, Erhan (2018) Investigating high productivity conditions for turn-milling in comparison to conventional turning. In: 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary

Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan (2018) An experimental study on surface errors in orthogonal turn-milling process. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Rahmat, Amin and Tofighi, Nima and Yıldız, Mehmet (2018) A numerical study of Rayleigh-Taylor instability for various Atwood numbers using ISPH method. Progress in Computational Fluid Dynamics, 18 (5). pp. 267-276. ISSN 1468-4349 (Print) 1741-5233 (Online)

Rahmat, Amin and Yıldız, Mehmet (2018) A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence. International Journal of Multiphase Flow, 105 . pp. 32-44. ISSN 0301-9322 (Print) 1879-3533 (Online)

Rajabalizadeh Mojarrad, Naeimeh (2018) Proton exchange membranes prepared by radiation grafting of n-vinyl imidazole/4-vinyl pyridine onto poly (ethylene-co-tetrafluoroethylene) for high-temperature PEM fuel cells. [Thesis]

Rehman, Abdul and Farooq, Muhammad and Naveed, Muhammad and Öztürk, Levent and Nawaz, Ahmad (2018) Pseudomonas-aided zinc application improves the productivity and biofortification of bread wheat. Crop and Pasture Science, 69 (7). pp. 659-672. ISSN 1836-0947 (Print) 1836-5795 (Online)

Rehman, Abdul and Farooq, Muhammad and Öztürk, Levent and Asif, Muhammad and Siddique, Kadambot H. M. (2018) Zinc nutrition in wheat-based cropping systems. Plant and Soil (SI), 422 (1-2). pp. 283-315. ISSN 0032-079X (Print) 1573-5036 (Online)

Rehman, Raheela and Çakmak, İsmail and Öztürk, Levent (2018) Differences in absorption and distribution of foliarly-applied zinc in maize and wheat by using stable isotope of 70Zn and Zn-responsive fluorescent dye Zinpyr. In: Borlaug Global Rust Initiative Technical Workshop 2018, Marrakech, Morocco

Rehman, Raheela and Çakmak, İsmail and Öztürk, Levent (2018) Uptake, transport and seed deposition of zinc (Zn) in wheat and maize. In: 2018 IFS Agronomic Conference, Robinson College, Cambridge, UK

Rehman, Raheela and Öztürk, Levent and Çakmak, İsmail (2018) Studying the differences in absorption and distribution of foliar-applied zinc in maize and wheat grown with low or adequate Zn supply. In: International Congress on Agriculture and Animal Sciences (ICAGAS), Alanya, Turkey

Rempelos, Leonidas and Almuayrifi, Abujawad M. and Baranski, Marcin and Tetard-Jones, Catherine and Eyre, Mick and Shotton, Peter and Çakmak, İsmail and Öztürk, Levent and Cooper, Julia and Volakakis, Nikolaos and Schmidt, Christoph and Sufar, Enas and Wang, Juan and Wilkinson, Andrew and Rosa, Eduardo A. S. and Zhao, Bingqiang and Rose, Terry J. and Leifert, Carlo and Bilsborrow, Paul (2018) Effects of agronomic management and climate on leaf phenolic profiles, disease severity, and grain yield in organic and conventional wheat production systems. Journal of Agricultural and Food Chemistry, 66 (40). pp. 10369-10379. ISSN 0021-8561 (Print) 1520-5118 (Online)

Renken, Malte and Ahmadi Digehsara, Amin and Borndörfer, Ralf and Şahin, Güvenç and Schlechte, Thomas (2018) Demand-driven line planning with selfish routing. In: Annual International Conference of the German Operations Research Society (GOR), Berlin, Germany

Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2018) Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1617-1634. ISSN 0268-3768 (Print) 1433-3015 (Online)

Rizvandi, Omid Babaie and Yeşilyurt, Serhat (2018) Modeling of flow distribution in proton exchange membrane fuel cell. In: 16th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2018), Dubrovnik, Croatia

Rizwan, Momina and Erdem, Esra and Patoğlu, Volkan (2018) Addressing challenges of theory of mind using hybrid conditional planning. In: RSS2018 Workshop: Towards a Framework for Joint Action - What About Theory of Mind?, USA

Rizwan, Momina and Patoğlu, Volkan and Erdem, Esra (2018) A formal model for human robot collaboration using hybrid conditional planning. In: RSS Workshop on Models and Representations for Natural Human-Robot Communication, USA

Rizwan, Momina and Patoğlu, Volkan and Erdem, Esra (2018) Human-robot collaborative assembly planning using hybrid conditional planning. In: FAIM/ISCA Workshop on Artificial Intelligence for Multimodal Human Robot Interaction, Stockholm, Sweden

Rodríguez-Henríquez, Francisco and Savaş, Erkay (2018) Special issue in honor of Peter Lawrence Montgomery. Journal of Cryptographic Engineering (SI), 8 (3). pp. 185-187. ISSN 2190-8508 (Print) 2190-8516 (Online)

Ross, Caroline and Nizami, Bilal and Glenister, Michael and Amamuddy, Olivier Sheik and Atılgan, Ali Rana and Atılgan, Canan and Bishop, Özlem Tastan (2018) MODE-TASK: large-scale protein motion tools. Bioinformatics, 34 (21). pp. 3759-3763. ISSN 1367-4803 (Print) 1460-2059 (Online)

Ross, Caroline Jane and Atılgan, Ali Rana and Taştan Bishop, Özlem and Atılgan, Canan (2018) Unraveling the motions behind Enterovirus 71 uncoating. Biophysical Journal, 114 (4). pp. 822-838. ISSN 0006-3495 (Print) 1542-0086 (Online)

Saçıkara Karıksız, Elif (2018) Concatenated structure and construction of certain code families. [Thesis]

Sadeghi, Sadra and Bahmani Jalali, Houman and Melikov, Rustamzhon and Kumar, Baskaran Ganesh and Mohammadi Aria, Mohammad and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) Stokes-shift-engineered indium phosphide quantum dots for efficient luminescent solar concentrators. ACS Applied Materials & Interfaces, 10 (15). pp. 12975-12982. ISSN 1944-8244 (Print) 1944-8252 (Online)

Sadeghi, Sahl and Işıkel Şanlı, Lale and Güler, Enver and Alkan Gürsel, Selmiye (2018) Enhancing proton conductivity via sub-micron structures in proton conducting membranes originating from sulfonated PVDF powder by radiation-induced grafting. Solid State Ionics, 314 . pp. 66-73. ISSN 0167-2738 (Print) 1872-7689 (Online)

Saeidi Harzand, Sahand (2018) Carbon dioxide capture by adsorption on a biomass based activated carbon. [Thesis]

Sahba, Pedram and Balcıoğlu, Barış and Banjevic, Dragan (2018) Multilevel rationing policy for spare parts when demand is state dependent. OR Spectrum, 40 (3). pp. 751-780. ISSN 0171-6468 (Print) 1436-6304 (Online)

Salehi Heydar Abad, Mehdi and Erçetin, Özgür and Elbatt, Tamer and Nafie, Mohammed (2018) SWIPT using hybrid ARQ over time varying channels. IEEE Transactions on Green Communications and Networking, 2 (4). pp. 1087-1100. ISSN 2473-2400

Salehi Heydar Abad, Mehdi and Erçetin, Özgür and Elbatt, Tamer and Nafie, Mohammed (2018) Wireless energy and information transfer in networks with hybrid ARQ. In: IEEE Wireless Communications and Networking Conference (WCNC), Barcelona, Spain

Salehi Heydar Abad, Mehdi and Erçetin, Özgür and Gündüz, Deniz (2018) Channel sensing and communication over a time-correlated channel with an energy harvesting transmitter. IEEE Transactions on Green Communications and Networking, 2 (1). pp. 114-126. ISSN 2473-2400

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Kinematic based selection of the workpiece location in robotic milling. In: International Symposium on Machining, Antalya, Turkey

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Tool axis optimization for robotic 5-axis milling considering kinematics. In: 14th Conference on High Speed Machining Conference, San Sebastian (Accepted)

Sardari Ghojehbeiglou, Behzad and Özcan, Meriç (2018) Investigation of brass as a real-time substrate for surface-enhanced Raman spectroscopy. In: Biophotonics: Photonic Solutions for Better Health Care VI 2018, Strasbourg, France

Sarıkaya, Yunus and Erçetin, Özgür and Gürbüz, Özgür (2018) Control of cognitive networks with friendly jamming as a service. IEEE Transactions on Cognitive Communications and Networking, 4 (2). pp. 299-313. ISSN 2332-7731

Sarıkaya, Yunus and Inaltekin, Hazer and Alpcan, Tansu and Evans, Jamie (2018) Stability and dynamic control of underlay mobile edge networks. IEEE Transactions on Mobile Computing, 17 (9). pp. 2195-2208. ISSN 1536-1233 (Print) 1558-0660 (Online)

Savaş, Erkay and Koç, Çetin Kaya (2018) Montgomery inversion. Journal of Cryptographic Engineering, 8 (3). pp. 201-210. ISSN 2190-8508 (Print) 2190-8516 (Online)

Saving, T. V. and Abugaliyeva, A. I. and Çakmak, İsmail and Kozhakhmetov, K. (2018) Mineral composition of wild relatives and introgressive forms in wheat selection. Vavilovskii Zhurnal Genetiki i Selektsii, 22 (1). pp. 88-96. ISSN 2500-0462 (Print) 2500-3259 (Online)

Sayers, Zehra (2018) International Cooperation for Enhancing Nuclear Safety, Security, Safeguards and Non-proliferation-60 Years of IAEA and EURATOM Introduction. In: 20th Edoardo Amaldi Conference on International Cooperation for Enhancing Nuclear Safety, Security, Safeguards and Non-Proliferation, Accad Nazl Lincei, Rome, ITALY

Schick, Sassicaia and Broadrup, Robert L. and Mayack, Christopher and White, Helen K. and Macherone, Anthony (2018) Integrating GC/TOF exposome profiling and genetic disease screening to provide a holistic perspective on honey bee health. American Laboratory, 50 (3). pp. 21-23. ISSN 0044-7749

Schüller, Peter and Benz, Mishal (2018) Best-effort inductive logic programming via fine-grained cost-based hypothesis generation: the inspire system at the inductive logic programming competition. Machine Learning, 107 (7). pp. 1141-1169. ISSN 0885-6125 (Print) 1573-0565 (Online)

Seymen, Sinan (2018) A three-stage solution approach to Turkish day-ahead electricity market. [Thesis]

Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors. Thin-Walled Structures, 130 . pp. 458-466. ISSN 0263-8231 (Print) 1879-3223 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Self-healing thermosetting composites: concepts, chemistry and future advances. In: Delville, Marie-Helene and Taubert, Andreas, (eds.) Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials. Wiley, UK. ISBN 9783527342556 (Print) 9783527807130 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification. Composites Part A: Applied Science and Manufacturing, 106 . pp. 1-10. ISSN 1359-835X (Print) 1878-5840 (Online)

Sezen, Meltem and Ow-Yang, Cleva W. and Karahan, Özlem and Kıtıki, Burak (2018) Micro and nanostructural analysis of a human tooth using correlated focused ion beam (FIB) and transmission Electron microscopy (TEM) investigations. Micron, 115 . pp. 17-24. ISSN 0968-4328 (Print) 1878-4291 (Online)

Shafique, Atia (2018) Modeling and characterization of high TCR, low noise Si/Si1-xGex multi-quantum well detector for uncooled microbolometers. [Thesis]

Shafique, Atia and Abbasi, Shahbaz and Ceylan, Ömer and Barıştıran Kaynak, Canan and Kaynak, Mehmet and Gürbüz, Yaşar (2018) Physical device modeling of Si/Si1-xGex multi-quantum well detector to optimize Ge content for higher thermal sensitivity. In: Infrared Technology and Applications XLIV 2018, Orlando, USA

Shafique, Atia and Abbasi, Shahbaz and Ceylan, Ömer and Goeritz, Alexander and Yamamoto, Yuji and Kaynak, Canan Baristiran and Kaynak, Mehmet and Gürbüz, Yaşar (2018) A behavioral model for high Ge content in Si/Si1-xGex multi-quantum well detector. IEEE Sensors Journal, 18 (20). pp. 8280-8286. ISSN 1530-437X (Print) 1558-1748 (Online)

Shafique, Atia and Abbasi, Shahbaz and Ceylan, Ömer and Yamamoto, Yuji and Barıştıran Kaynak, Canan and Kaynak, Mehmet and Gürbüz, Yaşar (2018) Comprehensive predictive device modeling and analysis of a Si/Si1-xGex multiquantum-well detector. IEEE Transactions on Electron Devices, 65 (10). pp. 4353-4361. ISSN 0018-9383 (Print) 1557-9646 (Online)

Shafique, Atia and Ceylan, Ömer and Yazıcı, Melik and Kaynak, Mehmet and Gürbüz, Yaşar (2018) A low-power CMOS readout IC with on-chip column-parallel SAR ADCs for microbolometer applications. In: Infrared Technology and Applications XLIV 2018, Orlando, USA

Shahmoradi, Zahed and Ünlüyurt, Tonguç (2018) Failure detection for series systems when tests are unreliable. Computers & Industrial Engineering, 118 . pp. 309-318. ISSN 0360-8352 (Print) 1879-0550 (Online)

Shakoorioskooie, Mahdieh and Menceloğlu, Yusuf Z. and Ünal, Serkan and Hayat Soytaş, Serap (2018) Rapid microwave-assisted synthesis of platinum nanoparticles immobilized in electrospun carbon nanofibers for electrochemical catalysis. ACS Applied Nano Materials, 1 (11). pp. 6236-6246. ISSN 2574-0970

Shawuti, Shalima and Can, Musa Mutlu and Gülgün, Mehmet Ali and Kaneko, Satoru and Endo, Tamio (2018) Influence of grain boundary interface on ionic conduction of (Zn1-x,Co-x)O. Composites Part B: Engineering, 147 . pp. 252-258. ISSN 1359-8368 (Print) 1879-1069 (Online)

Shawuti, Shalima and Difiglio, Carmine and Esmaeilialiabadi, Danial and Gülgün, Mehmet Ali and Öncel, Çınar and Yeşilyurt, Serhat (2018) Using natural gas as an environmentally sustainable power source with solid oxide fuel cells. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Shende, Nirmal and Gürbüz, Özgür and Erkip, Elza (2018) Half-duplex or full-duplex communications: degrees of freedom analysis under self-interference. IEEE Transactions on Wireless Communications, 17 (2). pp. 1081-1093. ISSN 1536-1276 (Print) 1558-2248 (Online)

Shojaeian, Mostafa and Nedaei, Masoumeh and Yıldız, Mehmet and Koşar, Ali (2018) Numerical heat transfer and entropy analysis on liquid slip flows through parallel-plate microchannels. Journal of Thermal Science and Engineering Applications, 10 (2). ISSN 1948-5085 (Print) 1948-5093 (Online)

Simsekli, Umut and Erdoğan, Halil and Leglaive, Simon and Liutkus, Antoine and Badeau, Roland and Richard, Gael (2018) Alpha-stable low-rank plus residual decomposition for speech enhancement. In: IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), Calgary, AB, Canada

Sinjushin, Andrey A. and Tekdal, Dilek and Çiftçi, Özgün Cem and Çetiner, Selim (2018) Floral development in Thermopsis turcica, an unusual multicarpellate papilionoid legume. Plant Systematics and Evolution, 304 (4). pp. 461-471. ISSN 0378-2697 (Print) 1615-6110 (Online)

Sogutmaz Ozdemir, Bahar and Budak, Hikmet (2018) Application of tissue culture and transformation techniques in model species Brachypodium distachyon. In: Sablok, Gaurav and Budak, Hikmet and Ralph, Peter J., (eds.) Brachypodium Genomics: Methods and Protocols. Methods in Molecular Biology, 1667. Humana, New York, NY, pp. 289-310. ISBN 978-1-4939-8439-8 (Print) 978-1-4939-7278-4 (Online)

Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2018) Efficient strategies for reliability-based design optimization of variable stiffness composite structures. Structural and Multidisciplinary Optimization, 57 (2). pp. 689-704. ISSN 1615-147X (Print) 1615-1488 (Online)

Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) Cost analysis of variable stiffness composite structures with application to a wind turbine blade. Composite Structures, 203 . pp. 681-695. ISSN 0263-8223 (Print) 1879-1085 (Online)

Sonbas, E. and Dhuga, K. S. and Göğüş, Ersin (2018) A study of low-mass x-ray binaries in the low-luminosity regime. Astrophysical Journal, 853 (2). ISSN 0004-637X (Print) 1538-4357 (Online)

Sonbaş, E. and Dhuga, K. S. and Göğüş, Ersin (2018) The bright x-ray source in NGC 3413. Astrophysical Journal, 865 (2). ISSN 0004-637X (Print) 1538-4357 (Online)

Soomro, Mehrullah and Nourizadeh Azar, Saeed and Gürbüz, Özgür and Onat, Ahmet (2018) Work-in-progress: networked control of autonomous underwater vehicles with acoustic and radio frequency hybrid communication. In: IEEE Real-Time Systems Symposium (RTSS), Paris, France

Suhail, Faizan (2018) Privacy risks of ranked data publication. [Thesis]

Suwannapong, Guntima and Samrit, Maksong and Phainchajoen, Mananya and Benbow, Mark and Mayack, Christopher (2018) Survival and health improvement of Nosema infected Apis florea (Hymenoptera: Apidae) bees after treatment with propolis extract. Journal of Asia-Pacific Entomology, 21 (2). pp. 437-444. ISSN 1226-8615

Şen, Canhan (2018) Electric field control of interfacial spins in ferroelectric/ferromagnetic junctions. [Thesis]

Şen, Mehmet Umut and Yanıkoğlu, Berrin (2018) Document classification of SuDer Turkish news corpora [SuDer Türkçe haber derlemlerinin doküman sınıflandırması]. In: 26th Signal Processing and Communications Applications Conference (SIU), Izmir, Turkey

Şendur, Kürşat and Ertaş Uslu, Merve and Mısırlıoğlu, Burç (2018) Fabrication and spectral properties of textured phase change VO2 nanostructures obtained via oxidation of thermally evaporated metallic vanadium films. In: Materials Research Society Fall 2018 Meetings, Boston, USA

Şengör, Mustafa and Özgün, Alp and Çorapcıoğlu, Gülcan and İpekoğlu, Mehmet and Garipcan, Bora and Ersoy, Nuri and Altıntaş, Sabri (2018) Core-shell PVA/gelatin nanofibrous scaffolds using co-solvent, aqueous electrospinning: toward a green approach. Journal of Applied Polymer Science, 135 (32). ISSN 0021-8995 (Print) 1097-4628 (Online)

Şentürk, İzzet F. and Balakrishnan, P. and Abu-Doleh, Anas and Kaya, Kamer and Malluhi, Qutaibah and Çatalyürek, Ümit V. (2018) A resource provisioning framework for bioinformatics applications in multi-cloud environments. Future Generation Computer Systems, 78 (Part1). pp. 379-391. ISSN 0167-739X (Print) 1872-7115 (Online)

Şentürk, Yusuf Mert and Patoğlu, Volkan (2018) MRI-VisAct: a Bowden-cable-driven MRI-compatible series viscoelastic actuator. Transactions of the Institute of Measurement and Control (SI), 40 (8). pp. 2440-2453. ISSN 0142-3312 (Print) 1477-0369 (Online)

Şenuysal, Hilal (2018) Automated nanomaterial integrated repair patch production and its implementation for carbon fiber-reinforced composites. [Thesis]

Şimşek, Eren and Oğuz, Oğuzhan and Bilge, Kaan and Çıtak, Mehmet Kerem and Çolak, Oğuzhan and Menceloğlu, Yusuf Z. (2018) Poly(propylene)/waste vulcanized ethylene- propylene-diene monomer (PP/WEPDM) blends prepared by high-shear thermo-kinetic mixer. Journal of Elastomers and Plastics, 50 (6). pp. 537-553. ISSN 0095-2443 (Print) 1530-8006 (Online)

Taheri, M. H. and Mohammadpourfard, Mousa and Khalili Sadaghiani, Abdolali and Koşar, Ali (2018) Wettability alterations and magnetic field effects on the nucleation of magnetic nanofluids: a molecular dynamics simulation. Journal of Molecular Liquids, 260 . pp. 209-220. ISSN 0167-7322 (Print) 1873-3166 (Online)

Talay, Beril (2018) Yee's bijective proof of Bousquet-Mélou and Eriksson's refinement of the lecture hall partition theorem. [Thesis]

Taş, Mustafa Kemal and Mercan, Hanefi and Demiröz, Gülşen and Kaya, Kamer and Yılmaz, Cemal (2018) Generating cost-aware covering arrays for free. In: 4th International Conference on Tools and Methods of Program Analysis (TMPA 2017), Moscow, Russia

Taşdemir, Adnan and Biçer, Emre and Alkan Gürsel, Selmiye and Yürüm, Alp (2018) Cerium dioxide catalyst nanorods decorated three-dimensional nitrogen doped and reduced graphene oxide electrodes for Li-air batteries. In: 256th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nanoscience, Nanotechnology and Beyond, Boston, MA

Taşkıran, Hakan (2018) Screening of p53-MDM2 interaction inhibitors through genome editing, high-content screening, and surface plasmon resonance. [Thesis]

Tavakol, Ershad and Jakli, Balint and Çakmak, İsmail and Dittert, Klaus and Karlovsky, Petr and Pfohl, Katharina and Senbayram, Mehmet (2018) Optimized potassium nutrition improves plant-water-relations of barley under PEG-induced osmotic stress. Plant and Soil, 430 (1-2). pp. 23-35. ISSN 0032-079X (Print) 1573-5036 (Online)

Tavakol Aghaei, Vahid and Onat, Ahmet and Yıldırım, Sinan (2018) A Markov chain Monte Carlo algorithm for Bayesian policy search. Systems Science and Control Engineering, 6 (1). pp. 438-455. ISSN 2164-2583

Tavşanoğlu, Başak (2018) Decision support system for search engine advertising campaign management by determining negative keywords. [Thesis]

Tekdal, Dilek and Çetiner, Selim (2018) Investigation of the effects of salt (NaCl) stress and cadmium (cd) toxicity on growth and mineral acquisition of Vuralia turcica. South African Journal of Botany, 118 . pp. 274-279. ISSN 0254-6299 (Print) 1727-9321 (Online)

Tekdal, Dilek and Çıngay, Burçin and Çetiner, Selim (2018) Determination of soil nutrient status in Vuralia turcica populations growing at different locations in the Central Anatolia Region of Turkey. Turkish Journal of Botany, 42 (3). pp. 317-326. ISSN 1300-008X (Print) 1303-6106 (Online)

Telciyan, Ayk (2018) On the existence of the solutions for the inextensible string equations. [Thesis]

Tokatlı, Ozan and Patoğlu, Volkan (2018) Using fractional order elements for haptic rendering. In: Bicchi, Antonio and Burgard, Wolfram, (eds.) Robotics Research. Springer Proceedings in Advanced Robotics (SPAR, Volume 2), 1. Springer International Publishing, pp. 373-388. ISBN 978-3-319-51531-1 (Print) 978-3-319-51532-8 (Online)

Tolay, Nazife (2018) Generation of reporter cell lines by genome editing to probe p53 activity. [Thesis]

Topcuoğlu, Cem and Kaya, Kamer and Savaş, Erkay (2018) A generic private information retrieval scheme with parallel multi-exponentiations on multicore processors. Concurrency and Computation: Practice and Experience (SI), 30 (21). ISSN 1532-0626 (Print) 1532-0634 (Online)

Topdemir, Süleyman (2018) A mathematical model and application on the prevention of gerrymandering. [Thesis]

Toprakhisar, Burak and Nadernezhad, Ali and Bakırcı, Ezgi and Khani, Navid and Akdeniz Skvortsov, Gözde and Koç, Bahattin (2018) Development of bioink from decellularized tendon extracellular matrix for 3D bioprinting. Macromolecular Bioscience, 18 (10). ISSN 1616-5187 (Print) 1616-5195 (Online)

Topuz, Fuat and Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Menceloğlu, Yusuf Z. and Koç, Bahattin (2018) Nanosilicate embedded agarose hydrogels with improved bioactivity. Carbohydrate Polymers, 201 . pp. 105-112. ISSN 0144-8617 (Print) 1879-1344 (Online)

Topuz, Fuat and Uyar, Tamer (2018) Cyclodextrin-assisted synthesis of tailored mesoporous silica nanoparticles. Beilstein Journal of Nanotechnology, 9 (1). pp. 693-703. ISSN 2190-4286

Tufani, Ali (2018) Vapor phase synthesis of smart membranes for macromolecule separation applications. [Thesis]

Tuğcuoğlu Musapaşaoğlu, Aslı (2018) Algebraic and homological properties of polymatroidal ideals. [Thesis]

Tunç, Lütfi Taner (2018) Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1891-1909. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems. Mechanical Systems and Signal Processing, 111 . pp. 423-441. ISSN 0888-3270 (Print) 1096-1216 (Online)

Tunç, Lütfi Taner and Ozsahin, Orkun (2018) Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes. Advances in Manufacturing, 6 (3). pp. 308-318. ISSN 2095-3127 (Print) 2195-3597 (Online)

Turan, Mehmet and Pilavci, Yusuf Yigit and Ganiyusufoğlu, İpek and Araujo, Helder and Konukoglu, Ender and Sitti, Metin (2018) Sparse-then-dense alignment-based 3D map reconstruction method for endoscopic capsule robots. Machine Vision and Applications, 29 (2). pp. 345-359. ISSN 0932-8092 (Print) 1432-1769 (Online)

Türkmen, Eşref (2018) W/D-Bands single-chip systems in a 0.13μm SiGe BiCMOS technology-dicke radiometer, and frequency extension module for VNAs. [Thesis]

Türkmen, Eşref and Burak, Abdurrahman and Güner, Alper and Kalyoncu, İlker and Kaynak, Mehmet and Gürbüz, Yaşar (2018) A SiGe HBT d-band LNA with butterworth response and noise reduction technique. IEEE Microwave and Wireless Components Letters, 28 (6). pp. 524-526. ISSN 1531-1309 (Print) 1558-1764 (Online)

Tüysüz, Hilal (2018) Changepoint model for Bayesian online fraud detection in call data. [Thesis]

Uğurlu, Devran (2018) Novel mathematical methods for analysis of brain white matter fibers using diffusion MRI. [Thesis]

Uğurlu, Devran and Firat, Zeynep and Türe, Uğur and Unal, Gozde (2018) Neighborhood resolved fiber orientation distributions (NRFOD) in automatic labeling of white matter fiber pathways. Medical Image Analysis, 46 . pp. 130-145. ISSN 1361-8415 (Print) 1361-8423 (Online)

Ulusoy, Gündüz (2018) İmalat sektöründe endüstri 4.0 dönüşümü çabaları: bazı gözlemler. İktisat ve Toplum, 8 (92). pp. 121-123. ISSN 1309-9418

Usta, Baran (2018) Optimal hypergraph partitioning. [Thesis]

Uzunovic, Tarik and Şabanoviç, Asif (2018) A novel approach to motion control design for functionally related systems. International Journal of Control, Automation and Systems, 16 (5). pp. 2043-2054. ISSN 1598-6446 (Print) 2005-4092 (Online)

Ünal, Özlem and Khodadust, Rouhollah and Durmuşoğlu, Emek G. and Erdem, Emre and Yağcı, Mustafa Barış and Ow-Yang, Cleva W. and Yurtsever, Ersin and Yağcı Acar, Havva (2018) Discovery of an exceptionally strong luminescence of polyethyleneimine-superparamagnetic iron oxide nanoparticles. Macromolecular Chemistry and Physics, 219 (9). ISSN 1022-1352 (Print) 1521-3935 (Online)

Ünlüyurt, Tonguç and Aydın, Cenk (2018) (1 January 2018) Data for container relocation problem. [Dataset]

Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter (2018) Identification of the CIRP expertise network based on public data. In: 51st CIRP Conference on Manufacturing Systems, Stockholm, Sweden

Vuruşaner Aktaş, Beyza and Gargiulo, Simona and Testa, Gabriella and Gamba, Paola and Leonarduzzi, Gabriella and Poli, Giuseppe and Başağa, Hüveyda (2018) The role of autophagy in survival response induced by 27-hydroxycholesterol in human promonocytic cells. Redox Biology, 17 . pp. 400-410. ISSN 2213-2317

Wakeel, Abdul and Farooq, Muhammad and Bashir, Khurram and Öztürk, Levent (2018) Micronutrient malnutrition and biofortification: recent advances and future perspectives. In: Hossain, Mohammad Anwar and Kamiya, Takehiro and Burritt, David J. and Tran, Lam-Son Phan and Fujiwara, Toru, (eds.) Plant Micronutrient Use Efficiency: Molecular and Genomic Perspectives in Crop Plants. Elsevier, UK, USA, pp. 225-243. ISBN 9780128122433 (Print) 9780128121047 (Online)

Weinstein, Zohar B. and Kuru, Nurdan and Kiriakov, Szilvia and Palmer, Adam C. and Khalil, Ahmad S. and Clemons, Paul A. and Zaman, Muhammad H. and Roth, Frederick P. and Çokol, Murat (2018) Modeling the impact of drug interactions on therapeutic selectivity. Nature Communications, 9 . ISSN 2041-1723

Wietstruck, M. and Marschmeyer, S. and Lisker, M. and Kruger, A. and Wolansky, D. and Fraschke, M. and Kulse, P. and Goritz, A. and Inac, M. and Voss, T. and Mai, A. and Kaynak, Mehmet (2018) Through-Silicon Via process module with backside metallization and redistribution layer within a 130 nm SiGe BiCMOS technology. In: IEEE 19th Electronics Packaging Technology Conference (EPTC), Singapore

Wietstruck, M. and Marschmeyer, S. and Tolunay Wipf, S. and Wipf, C. and Voß, T. and Bertrand, M. and Pistono, E. and Acri, G. and Podevin, F. and Ferrari, P. and Kaynak, Mehmet (2018) Design optimization of through-silicon vias for substrate-integrated waveguides embedded in high-resistive silicon interposer. In: IEEE 20th Electronics Packaging Technology Conference (EPTC), Singapore

Wietstruck, Matthias and Marschmeyer, Steffen and Kulse, Philipp and Vob, Thomas and Lisker, Marco and Krüger, Andreas and Wolansky, Dirk and Fraschke, Mirko and Kaynak, Mehmet (2018) Development of a through-silicon via (TSV) process module for multi-project wafer SiGe BiCMOS and silicon interposer. In: IEEE 68th Electronic Components and Technology Conference (ECTC), San Diego, CA, USA

Wipf, C. and Sorge, R. and Göritz, A. and Wipf, S. Tolunay and Scheit, A. and Kissinger, D. and Kaynak, Mehmet (2018) High voltage LDMOS inverter for on-chip RF-MEMS actuation. In: IEEE 18th Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems (SiRF), Anaheim, CA, USA

Yağış, Ekin (2018) An ANN based combined classifier approach for facial emotion recognition. [Thesis]

Yağış, Ekin and Ünel, Mustafa (2018) Facial expression based emotion recognition using neural networks. In: 15th International Conference on Image Analysis and Recognition, ICIAR 2018, Povoa de Varzim, Portugal

Yalçıner, İbrahim Faruk (2018) HCP-ASP: a parallel algorithm for hybrid conditional planning using answer set programming. [Thesis]

Yar, Yasemin and Khodadust, Rouhollah and Akkoç, Yunus and Utkur, Mustafa and Sarıtaş, Emine Ülkü and Gözüaçık, Devrim and Acar, Havva Yağcı (2018) Development of tailored SPION-PNIPAM nanoparticles by ATRP for dually responsive doxorubicin delivery and MR imaging. Journal of Materials Chemistry B, 6 (2). pp. 289-300. ISSN 2050-750X (Print) 2050-7518 (Online)

Yarar Kaplan, Begüm and Haghmoradi, Navid and Biçer, Emre and Merino, Cesar and Alkan Gürsel, Selmiye (2018) High performance electrocatalysts supported on graphene based hybrids for polymer electrolyte membrane fuel cells. International Journal of Hydrogen Energy, 43 (52). pp. 23221-23230. ISSN 0360-3199 (Print) 1879-3487 (Online)

Yasin, Mubashar and Khwaja, Ahmed Shaharyar and Çetin, Müjdat (2018) A subaperture based approach for SAR moving target imaging by low-rank and sparse decomposition. In: Algorithms for Synthetic Aperture Radar Imagery XXV 2018, Orlando, FL, USA

Yavuz, Ayşegül (2018) Ramanujan's congruences for the partition function modulo 5,7,11. [Thesis]

Yazıcı, Melik and Ceylan, Ömer and Shafique, Atia and Abbasi, Shahbaz and Gürbüz, Yaşar (2018) High dynamic range smart pixel architecture for infrared focal plane arrays. In: IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy

Yelbay, Belma and Birbil, Ş. İlker and Bülbül, Kerem and Jamil, Hasan M. (2018) Trade-offs computing minimum hub cover toward optimized labeled graph query processing. AJIT-e: Online Academic Journal of Information Technology, 9 (33). pp. 39-68. ISSN 1309-1581

Yenenler, Aslı and Venturini, Alessandro and Burduroglu, Huseyin Cahit and Sezerman, Osman Uğur (2018) Investigating the structural properties of the active conformation BTL2 of a lipase from Geobacillus thermocatenulatus in toluene using molecular dynamic simulations and engineering BTL2 via in-silico mutation. Journal of Molecular Modeling, 24 (9). ISSN 1610-2940 (Print) 0948-5023 (Online)

Yenigün, Hüsnü and Yevtushenko, Nina and Kushik, Natalia and Lopez, Jorge (2018) The effect of partiality and adaptivity on the complexity of FSM state identification problems. Proceedings of the Institute for System Programming, 30 (1). pp. 7-24. ISSN 2079-8156 (Print) 2220-6426 (Online)

Yeşilırmak, Filiz and Ozturk Gökçe, Zahide Neslihan and Metin, Banu and Sayers, Zehra (2018) Functional analysis of Triticum durum type 1 metallothionein gene (dMT) in response to varying levels of cadmium. Indian Journal of Plant Physiology, 23 (1). pp. 140-147. ISSN 0019-5502 (Print) 0974-0252 (Online)

Yıldızhan, Yağmur (2018) Dielectrophoretic characterization and separation of leukocytes. [Thesis]

Yıldızhan, Yağmur and Göğebakan, Umut Barış and Altay, Alara and Islam, Monsur and Martinez-Duarte, Rodrigo and Elitaş, Meltem (2018) Quantitative investigation for the dielectrophoretic effect of fluorescent dyes at single-cell resolution. ACS Omega, 3 (7). pp. 7243-7246. ISSN 2470-1343

Yılmaz, Bengisu and Adanova, Venera and Acar, Rüyam and Tari, Sibel (2018) Shape patterns in digital fabrication: a survey on negative poisson's ratio metamaterials. In: Genctav, Aslı and Leonard, Kathryn and Tari, Sibel and Hubert, Evelyne and Morin, Geraldine and El-Zehiry, Noha and Chambers, Erin, (eds.) Research in Shape Analysis: WiSH2, Sirince, Turkey, June 2016. Association for Women in Mathematics Series, 12. Springer Cham, pp. 161-172. ISBN 978-3-319-77065-9 (Print) 978-3-319-77066-6 (Online)

Yılmaz, C. and Akalın, C. and Günal, I. and Çelik, H. and Büyük, M. and Suleman, A. and Yıldız, Mehmet (2018) Observation of damage accumulation under in-plane shear loading. In: Specialists' Meeting AVT-305 on Sensing Systems for Integrated Vehicle Health Management (IVHM) of Military Vehicles (NATO STO AVT-305), Athens, Greece

Yılmaz, Çağatay (2018) Monitoring micro-damage accumulation based on reduction in elastic properties using fiber bragg grating sensors, and acoustic emission and thermography methods in fiber reinforced polymeric composites. [Thesis]

Yılmaz, Çağatay and Akalın, Çağdaş and Günal, İbrahim and Çelik, Hakan and Büyük, Murat and Suleman, Afzal and Yıldız, Mehmet (2018) A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading. Composite Structures, 186 . pp. 347-354. ISSN 0263-8223 (Print) 1879-1085 (Online)

Yılmaz, Çağatay and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2018) Semi-intrinsic self-healing performance of liquid-cored microcapsules in epoxy matrix. Advances in Polymer Technology, 37 (5). pp. 1435-1443. ISSN 0730-6679 (Print) 1098-2329 (Online)

Yılmaz, Melike Sevim and Yarar, Begüm and Metin, Önder and Alkan Gürsel, Selmiye (2018) A facile synthesis and assembly of ultrasmall Pt nanoparticles on reduced graphene oxide‑carbon black hybrid for enhanced performance in PEMFC. Materials & Design, 151 . pp. 29-36. ISSN 0261-3069 (Print) 0264-1275 (Online)

Yildirim, Afsin T. and Eroglu, Fatih and Yesilyurt, Ogulcan and Albayrak, Kubilay and Şaş Çaycı, Hatice Sinem and Ciftci, Cihan (2018) Effect of ambient temperature on the flexural behavior of 3D printed composite beams. In: SAMPE Long Beach 2018 Conference and Exhibition, Long Beach, CA, USA

Yorulmaz, Yelda (2018) Optimization of synthesis conditions of boron nitride nanotubes (BNNTS) and their effects on epoxy resin curing. [Thesis]

Yuksel, Recep and Yarar Kaplan, Begüm and Biçer, Emre and Yürüm, Alp and Alkan Gürsel, Selmiye and Unalan, Husnu Emrah (2018) All-carbon hybrids for high performance supercapacitors. International Journal of Energy Research, 42 (11). pp. 3575-3587. ISSN 0363-907X (Print) 1099-114X (Online)

Yüce, Meral and Kurt, Hasan and Hussain, Babar and Budak, Hikmet (2018) Systematic evolution of ligands by exponential enrichment for aptamer selection. In: Sarmento, Bruno and Neves, José Das, (eds.) Biomedical Applications of Functionalized Nanomaterials: Concepts, Development and Clinical Translation. Elsevier, Amsterdam, pp. 211-243. ISBN 9780323508780 (Print) 9780323508797 (Online)

Yüce, Meral and Kurt, Hasan and Hussain, Babar and Ow-Yang, Cleva W. and Budak, Hikmet (2018) Exploiting stokes and anti-stokes type emission profiles of aptamer-functionalized luminescent nanoprobes for multiplex sensing applications. Chemistry Select, 3 (21). pp. 5814-5823. ISSN 2365-6549

Yüceoğlu, Birol and Birbil, Ş. İlker and Gürbüz, Özgür (2018) Dispersion with connectivity in wireless mesh networks. Journal of Industrial and Management Optimization, 14 (2). pp. 759-784. ISSN 1547-5816 (Print) 1553-166X (Online)

Yüksel, Kamer Ali (2018) Using information retrieval for interaction with mobile devices. Information Retrieval and Management: Concepts, Methodologies, Tools, and Applications. IGI Global, pp. 2112-2131. ISBN 9781522551911 (Print) 9781522551928 (Online)

Yürüm, Alp and Goharibajestani, Zahra and Yürüm, Yuda (2018) Faceted TiO2/Fe2O3 nanoparticles with carbon-based supports for water treatment applications. In: 255th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nexus of Food, Energy, and Water, New Orleans, LA

Zakharyuta, Vyacheslav (2018) Spaces of analytic functions on essentially pluripolar compacta. Functiones et Approximatio, Commentarii Mathematici, 59 (1). pp. 141-152. ISSN 0208-6573 (Print) 2080-9433 (Online)

Zaki, Hammad and Ünel, Mustafa (2018) Control of a hovering quadrotor UAV subject to periodic disturbances. In: 6th International Conference on Control Engineering & Information Technology (CEIT), Istanbul, Turkey

Zengin, Oğuzcan (2018) Sparsity-driven coupled imaging and autofocusing for interferometric SAR. [Thesis]

Zengin, Oğuzcan and Khwaja, Ahmed Shaharyar and Çetin, Müjdat (2018) Sparsity-driven coupled imaging and autofocusing for interferometric SAR. In: Algorithms for Synthetic Aperture Radar Imagery XXV 2018, Orlando, FL, USA

Zitani, Mahboubeh Kiani and Ebadzadeh, Touradj and Banijamali, Sara and Riahifar, Reza and Rüssel, Christian and Khabbazabkenar, Sirous and Ren, Haishen (2018) High quality factor microwave dielectric diopside glass-ceramics for the low temperature co-fired ceramic (LTCC) applications. Journal of Non-Crystalline Solids, 487 . pp. 65-71. ISSN 0022-3093 (Print) 1873-4812 (Online)