Items where Division is "Sabancı University Nanotechnology Research and Application Center" and Year is 2021

Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | E | H | J | K | M | N | T | Ş
Number of items: 20.

A

Abbasiasl, Taher and Mohammadpour Chehrghani, Mirvahid and Khalili Sadaghiani, abdolali and Koşar, Ali (2021) Gradient mixed wettability surfaces for enhancing heat transfer in dropwise flow condensation. International Journal of Heat and Mass Transfer, 179 . ISSN 0017-9310 (Print) 1879-2189 (Online)

Aydın, Mehmet Serhat and Bilgili, Hatice Kübra and Kızıltaş, Güllü and Emanet, Melis and Özaydın İnce, Gözde (2021) Fabrication and analysis of surface functionalized porous pcl-nha scaffolds with p(hema-co-egdma) hydrogel via icvd and bmp-2 release simulation. In: ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE 2020), Virtual, Online

B

Barak, Melike and Sheibani Aghdam, Araz and Seviniş, Emine Billur and Ünal, Serkan and Cebeci, Fevzi Çakmak (2021) Layer-by-layer assembly of nanofilms from colloidally stable amine-functionalized silica nanoparticles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 630 . ISSN 0927-7757 (Print) 1873-4359 (Online)

Bilgili, Hatice Kübra and Özaydın İnce, Gözde and Emanet, Melis and Kızıltaş, Güllü (2021) Fabrication of 3D bone scaffolds functionalized with spatiotemporal release of BMP-2 growth factor via iCVD to enhance osteoregeneration. In: ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE 2020), Virtual, Online

D

Dikyol, Caner and Altunbek, Mine and Koç, Bahattin (2021) Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues. Bioprinting, 24 . ISSN 2405-8866 Published Online First http://dx.doi.org/10.1016/j.bprint.2021.e00159

E

Eren, Guncem Ozgun and Sadeghi, Sadra and Bahmani Jalali, Houman and Ritter, Maximilian and Han, Mertcan and Baylam, Isinsu and Melikov, Rustamzhon and Onal, Asim and Oz, Fatma and Sahin, Mehmet and Ow-Yang, Cleva W. and Sennaroglu, Alphan and Lechner, Rainer and Nizamoglu, Sedat (2021) Cadmium-free and efficient type-II InP/ZnO/ZnS quantum dots and their application for LEDs. ACS Applied Materials & Interfaces, 13 (27). pp. 32022-32030. ISSN 1944-8244 (Print) 1944-8252 (Online)

H

Hamed, Salimkhani and Erdem, Emre and Alkan Gürsel, Selmiye and Yürüm, Alp (2021) Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity. Journal of the American Ceramic Society, 104 (8). pp. 4257-4271. ISSN 0002-7820 (Print) 1551-2916 (Online)

J

Jafarpour, Mohammad and Sheibani Aghdam, Araz and Koşar, Ali and Cebeci, Fevzi Çakmak and Ghorbani, Morteza (2021) Electrospinning of ternary composite of PMMA-PEG-SiO2 nanoparticles: comprehensive process optimization and electrospun properties. Materials Today Communications, 29 . ISSN 2352-4928

Jafarpour, Mohammad and Sheibani Aghdam, Araz and Talebian Gevari, Moein and Koşar, Ali and Bayazıt, Mustafa Kemal and Ghorbani, Morteza (2021) An ecologically friendly process for graphene exfoliation based on the "hydrodynamic cavitation on a chip" concept. RSC Advances, 11 (29). pp. 17965-17975. ISSN 2046-2069 (Print) 2046-2069 (Online)

K

Karatum, Onuralp and Eren, Guncem Ozgun and Melikov, Rustamzhon and Onal, Asim and Ow-Yang, Cleva W. and Sahin, Mehmet and Nizamoglu, Sedat (2021) Quantum dot and electron acceptor nano-heterojunction for photo-induced capacitive charge-transfer. Scientific Reports, 11 (1). ISSN 2045-2322

Khalili Sadaghiani, Abdolali (2021) Numerical and experimental studies on flow condensation in hydrophilic microtubes. Applied Thermal Engineering, 197 . ISSN 1359-4311 (Print) 1873-5606 (Online) Published Online First http://dx.doi.org/10.1016/j.applthermaleng.2021.117359

Koç, Bahattin and Acar, Anıl Ahmet and Fallah, Ali and Daskalakis, Evangelos and Xu, Zhanyan and Omar, Abdalla M. and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Bartolo, Paulo (2021) Designing novel synthetic grafts for large bone defects: experimental and numerical studies. In: Kyratsis, Panagiotis and Davim, J. Paulo, (eds.) Experiments and simulations in advanced manufacturing. Springer, Cham, Switzerland, pp. 71-89. ISBN 978-3-030-69471-5 (print), 978-3-030-69472-2 (online)

Koç, Bahattin and Akdeniz Skvortsov, Gözde and Altunbek, Mine and Afghah, Seyedeh Ferdows and Khani, Navid (2021) 3D Bioprinting of molecularly engineered PEG-based hydrogels utilizing gelatin fragments. Biofabrication, 13 (4). ISSN 1758-5082 (Print) 1758-5090 (Online)

Koç, Bahattin and Fallah, Ali and Zarrabi, Ali and Afghah, Seyedeh Ferdows (2021) Effect of zinc-doped hydroxyapatite/graphene nanocomposite on the physicochemical properties and osteogenesis differentiation of 3D-printed polycaprolactone scaffolds for bone tissue engineering. Chemical Engineering Journal, 426 . ISSN 1385-8947 (Print) 1873-3212 (Online) Published Online First http://dx.doi.org/10.1016/j.cej.2021.131321

M

Mohammadmoradi, Omid and Celik, Umit and Mısırlıoğlu, Burç and İnce, Gözde (2021) Vapor phase synthesis of ferroelectric microislands on PVDF thin films. Nanotechnology, 32 (43). ISSN 0957-4484 (Print) 1361-6528 (Online)

Mohammadpour Chehrghani, Mirvahid and Abbasiasl, Taher and Sadaghiani, Abdolali Khalili and Koşar, Ali (2021) Copper-based superhydrophobic nanostructures for heat transfer in flow condensation. ACS Applied Nano Materials, 4 (2). pp. 1719-1732. ISSN 2574-0970

N

Niazi, Soroush and Khalili Sadaghiani, Abdolali and Gharıb, Ghazaleh and Kaya, Veysel Ogulcan and Çelik, Süleyman and Kutlu, Özlem and Koşar, Ali (2021) Bio-coated surfaces with micro-roughness and micro-porosity: Next generation coatings for enhanced energy efficiency. Energy, 222 . ISSN 0360-5442 (Print) 1873-6785 (Online)

T

Tajeddin, Alireza and Mustafaoğlu, Nur (2021) Design and fabrication of organ-on-chips: promises and challenges. Micromachines, 12 (12). ISSN 2072-666X

Taş, Cüneyt Erdinç and Ünal, Hayriye (2021) Thermally buffering polyethylene/halloysite/phase change material nanocomposite packaging films for cold storage of foods. Journal of Food Engineering, 292 . ISSN 0260-8774 (Print) 1873-5770 (Online)

Ş

Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü (2021) Initial study towards the integrated design of bone scaffolds based on cell diffusion, growth factor release and tissue regeneration. In: International Mechanical Engineering Congress & Exposition, Virtual Conference

This list was generated on Sun Jul 3 22:38:19 2022 +03.