Items where Subject is "T Technology (General)"

Group by: Creators | Item Type
Jump to: A | B | C | D | E | G | H | J | K | L | M | N | O | P | R | S | T | U | V | Y | Z | Ç | Ö | Ü | İ | Ş
Number of items at this level: 378.

A

Abbasiasl, Taher and Niazi, Soroush and Sheibani Aghdam, Araz and Chen, Hongjian and Cebeci, Fevzi Çakmak and Ghorbani, Morteza and Grishenkov, Dmitry and Koşar, Ali (2020) Effect of intensified cavitation using poly(vinyl alcohol) microbubbles on spray atomization characteristics in microscale. AIP Advances, 10 (2). ISSN 2158-3226

Abdolhosseinzadeh, Sina and Mousavi, Mirsajjad and Haghmoradi, Navid and Alkan Gürsel, Selmiye (2019) A continuous-flow photocatalytic reactor for the precisely controlled deposition of metallic nanoparticles. Journal of Visualized Experiments (JoVE), 146 . ISSN 1940-087X

Aboubakri, Akam and Ebrahimpour Ahmadi, Vahid and Koşar, Ali (2020) Modeling of a passive-valve piezoelectric micro-pump: a parametric study. Micromachines, 11 (8). ISSN 2072-666X

Acemoğlu, Alperen and Temel, Fatma Zeynep and Yeşilyurt, Serhat (2013) Characterization and modeling of micro swimmers with helical tails and cylindrical heads inside circular channels. In: 11th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2013), Sapporo, Japan

Adagideli, İnanç and Bozkurt, Ahmet Mert and Pekerten, Barış (2020) Implementing Maxwell's demon in spintronics devices. In: Spintronics XIII, Online

Adak, Ömer Kemal and Ayit, Orhan and Gülhan, Mert Mehmet and Erbatur, Kemalettin (2015) Genetic tuning of a central pattern generator for quadruped locomotion. In: III. International Electrical & Electronic Engineering and Technologies Conference (ELECTROTECH '15), Istanbul

Adak, Ömer Kemal and Bahçeci, Beste and Erbatur, Kemalettin (2021) Hybrid force-motion control for one-legged robot in operational space. In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Delft, Netherlands

Ahmad, Fiaz and Rasool, Akhtar and Özsoy, Emre and Şabanoviç, Asif and Elitaş, Meltem (2016) Design of a robust cascaded controller for Cuk converter. In: 17th IEEE International Power Electronics and Motion Control Conference (PEMC), Varna, Bulgaria

Ahmed, Kazi Sher and Bediz, Bekir (2022) Design of an active magnetic bearing spindle for micro-milling applications. In: 19th International Conference on Machine Design and Production, Kapadokya, Turkiye (Preprint)

Akcan, Caner and Akşit, Mahmut Faruk and Aksoy, Serdar and Yüksel, Ebubekir (2008) Response surface modeling of a small crossflow hydro turbine rotor. In: International Conference on Small Hydropower, Hidroenergia 2008: "On the Crossroads", Bled, Slovenia

Akşit, Mahmut Faruk and Doğu, Yahya (2005) INGAS2005 uluslararası doğalgaz işletmeciliği ve teknik eğitim sempozyumu bildiriler kitabı. [Volumes Edited / Special Issues]

Akşit, Mahmut Faruk and Çetinsoy, Ertuğrul and Kandemir, İIyas (2006) A study of brush seal oil lift through long bearing analysis. In: STLE/ASME International Joint Tribology Conference, San Antonio, TX, USA

Alan, Salih and Bediz, Bekir (2021) A novel electromechanical spectral element method for piezoelectric energy harvester plates. Journal of Sound and Vibration, 505 . ISSN 0022-460X (Print) 1095-8568 (Online)

Alijani Alijanvand, Hossein and Özbey, Arzu and Karimzadehkhouei, Mehrdad and Koşar, Ali (2019) Inertial micromixing in curved serpentine micromixers with different curve angles. Fluids, 4 (4). ISSN 2311-5521

Alijani Alijanvand, Hossein and Özbey, Arzu and Karimzadehkhouei, Mehrdad and Koşar, Ali (2018) The effect of curvature angle on mixing efficiency in curvilinear microchannels. In: 6th Micro and Nano Flows Conference 2018, Atlanta, USA

Alizadeh, Farid and Noyan, Nilay and Eckstein, Jonathan and Rudolf, Gabor (2008) Arrival rate approximation by nonnegative cubic splines. Operations Research, 56 (1). 140- 156. ISSN 0030-364X (Print) 1526-5463 (Online)

Alper, Başak and Sümengen, Selçuk and Balcısoy, Selim (2007) Dynamic visualization of geographic networks using surface deformations with constraints. In: The 25th Computer Graphics International Conference (CGI'2007), Petropolis, Brazil

Alpkan, Lütfihak and Bulut, Çağrı and Günday, Gürhan and Ulusoy, Gündüz and Kılıç, Kemal (2009) Organizational support for intrapreneurship and its interaction with human capital to enhance innovative performance. [Working Paper / Technical Report] Sabanci University ID:SU_FENS_2009/0010

Altay, Rana and Sadaghiani, Abdolali Khalili and Sevgen, İlker and Şişman, Alper and Koşar, Ali (2020) Numerical and experimental studies on the effect of surface roughness and ultrasonic frequency on bubble dynamics in acoustic cavitation. Energies, 13 (5). ISSN 1996-1073

Altekin, F. Tevhide and Kandiller, Levent and Özdemirel, Nur Evin (2008) Profit-oriented disassembly-line balancing. International Journal of Production Research, 46 (10). pp. 2675-2693. ISSN 0020-7543

Altekin, Tevhide and Yaman, Ulaş (2018) Implications of direct digital manufacturing on sustainable supply chain management. In: International Conference & Exhibition on Digital Transformation & Smart Systems (DTSS 2018), Ankara, Turkey

Altuğ, Sema Nur (2002) Risk management and post project evaluation processes for research and development projects. [Thesis]

Arca, Miray A. and Papila, Melih and Çöker, Demirkan (2016) Experimental investigation of strength of curved beam by thin ply non-crimp fabric laminates. In: Zehnder, Alan T. and Carroll, Jay and Hazeli, Kavan and Berke, Ryan B. and Pataky, Garrett and Cavalli, Matthew and Beese, Alison M. and Xia, Shuman, (eds.) Fracture, Fatigue, Failure and Damage Evolution: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics Series, 8. Springer, Switzerland, pp. 37-42. ISBN 978-3-319-42194-0 (Print) 978-3-319-42195-7 (Online)

Arıcı, Ece and Yarar Kaplan, Begüm and Mert, Ahmet Musap and Alkan Gürsel, Selmiye and Kınayyiğit, Şölen (2019) An effective electrocatalyst based on platinum nanoparticles supported with graphene nanoplatelets and carbon black hybrid for PEM fuel cells. International Journal of Hydrogen Energy, 44 (27). pp. 14175-14183. ISSN 0360-3199 (Print) 1879-3487 (Online)

Arın, İnanç and Erpam, Mert Kemal and Saygın, Yücel (2018) I-TWEC: interactive clustering tool for Twitter. Expert Systems with Applications, 96 . pp. 1-13. ISSN 0957-4174 (Print) 1873-6793 (Online)

Arslan, Mahmut Çağdaş (2002) A Decision support system for machine tool selection. [Thesis]

Artut, Hüseyin Selçuk (2016) Live coding for incorporating self-expression. In: International Conference on Social Sciences and Humanities "Challenges: From Diversity to Synergy" (ICSSH 2016), Skopje, Macedonia

Artut, Selçuk Hüseyin (2013) Amarok Pikap: interactive percussion playing automobile. In: Stockholm Music Acoustics Conference 2013 (SMAC) & Sound and Music Computing Conference 2013 (SMC), Stockholm, Sweden

Asghari Arpatappeh, Farzin and Aydemir, Berk Emre and Bilge, Kaan and Papila, Melih (2019) Multiscale reinforcing interlayers of self-same P(St-co-GMA) nanofibers loaded with MCF for polymer composites and nanocomposites. In: AIAA Scitech Forum, 2019, San Diego, United States

Avoine, Gildas and Bingöl, Muhammed Ali and Kardaş, Süleyman and Lauradoux, Cedric and Martin, Benjamin (2010) A framework for analyzing RFID distance bounding protocols. (Accepted)

Aydemir, Gizem and Koşar, Ali and Uvet, Hüseyin (2019) Design and implementation of a passive micro flow sensor based on diamagnetic levitation. Sensors and Actuators A: Physical, 300 . ISSN 0924-4247

Aydın, Ayhan (2006) Due date quotation in make-to-order systems with lead time sensitive customers. [Thesis]

Aydın, Cenk (2006) Improved rehandling strategies for container retrieval process. [Thesis]

Ayiter, Elif (2011) Becoming creative through self observation: a (second order) cybernetic learning strategy for the metaverse. International Journal of Art, Culture and Design Technologies (IJACDT), 1 (1). pp. 22-35. ISSN 2155-4196 (Print) 2155-420X (Online)

Ayiter, Elif (2010) Embodied in a metaverse: "anatomia" and "body parts". Technoetic Arts: A Journal of Speculative Research, 8 (2). pp. 181-188. ISSN 1477-965X (print) ; 1758-9533 (online)

Ayiter, Elif (2006) The bridge project: a visualisation exercise on free association & internet query and search mechanisms. In: The 33rd International Conference on Computer Graphics and Interactive Techniques SIGGRAPH 2006 Sketches, Boston, Massachusetts, USA

Ayiter, Elif and Balcısoy, Selim and Germen, Murat and Kaşarcı, İsmail and Türker, Uraz Cengiz and Çaylı, Merve (2007) "Space frames": using space, color and animation in the visualization of complex graph systems. In: 17th International Conference on Artificial Reality and Telexistence (ICAT 2007), Esbjerg, Denmark

Ayiter, Elif and Germen, Murat (2007) Looking aside: collective constructs, autarchic assemblage. In: MutaMorphosis: Challenging Arts and Sciences, Prague Municipal Library, Czech Republic

Azeemi, Rehman Yousuf and Erğun, Rıdvan and Taşdemir, Adnan and Alkan Gürsel, Selmiye and Yürüm, Alp (2019) A simple spray assisted method to fabricate high performance layered graphene/silicon hybrid anodes for lithium-ion batteries. International Journal of Hydrogen Energy, 44 (36). pp. 20267-20277. ISSN 0360-3199 (Print) 1879-3487 (Online)

B

Bajard, Alban and Aubreton, Olivier and Bokhabrine, Youssef and Verney, Benjamin and Eren, Gönen and Erçil, Aytül and Truchetet, Frederic (2012) Three-dimensional scanning of specular and diffuse metallic surfaces using an infrared technique. Optical Engineering, 51 (6). ISSN 0091-3286 (Print) 1560-2303 (Online)

Balcısoy, Selim and Ayiter, Elif (2006) Virtual environments for learners with special needs. In: 14th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision, Plzen, Czech Republic

Basmacı, Serdar Osman (2003) Supply chain collaboration : a case study in textile industry. [Thesis]

Başar, Ayfer and Çatay, Bülent and Ünlüyurt, Tonguç (2009) A new model and tabu search approach for planning the emergency service stations. In: Annual International Conference of the German Operations Research Society, 2008, Augsburg, Germany

Başar, Ayfer and Çatay, Bülent and Ünlüyurt, Tonguç (2008) Acil yardım istasyonu yerlerinin planlamasında bir tabu arama yaklaşımı. In: Yöneylem Araştırması ve Endüstri Mühendisliği 28. Ulusal Kongresi (YA/EM'08), İstanbul

Başar, Ayfer and Özşamlı, Nihan and Akçay, Alp Eren and Ertek, Gürdal (2008) A taxonomy of logistics innovations. [Working Paper / Technical Report] Sabanci University ID:SU_FENS_2008/0009

Bayram Akçapınar, Günseli and Gül, Özgür and Sezerman, Uğur (2012) From in silico to in vitro: modelling and production of trichoderma reesei endoglucanase 1 and its mutant in pichia pastoris. Journal of Biotechnology, 159 (1-2). pp. 61-68. ISSN 0168-1656 (print) ; 1873-4863 (online)

Beyhan, Berna (2016) Nanoteknoloji: sektörel analiz, Dünyadan örnekler ve Türkiye. In: Akçomak, İbrahim Semih and Erdil, Erkan and Pamukçu, Mehmet Teoman and Tiryakioğlu, Murad, (eds.) Bilim, Teknoloji ve Yenilik: Kavramlar, Kuramlar ve Politika. Bilgi Üniversitesi Yayınları, İstanbul, pp. 473-490. ISBN 978-605-399-448-0

Bharadwaj, Shiv Kumar and Pandey, Ashish and Yağcı, Barış and Özgüz, Volkan Hüsnü and Qureshi, Anjum (2018) Graphene nano-mesh-Ag-ZnO hybrid paper for sensitive SERS sensing and self-cleaning of organic pollutants. Chemical Engineering Journal, 336 . pp. 445-455. ISSN 1385-8947 (Print) 1873-3212 (Online)

Bhate, Nitin and Thermos, Anthony C. and Akşit, Mahmut Faruk and Demiroğlu, Mehmet and Kizil, Huseyin (2004) Non-metallic brush seals for gas turbine bearings. In: ASME Turbo Expo 2004:Power for Land, Sea, and Air, Vienna, Austria

Bilen, Hakan and Ünel, Mustafa (2008) Micromanipulation using a microassembly workstation with vision and force sensing. In: Huang, D.-S., (ed.) Advanced Intelligent Computing Theories and Applications. With Aspects of Theoretical and Methodological Issues. Lecture Notes in Computer Science, 5226/2. Springer, Berlin / Heidelberg, pp. 1164-1172. ISBN 978-3-540-87440-9

Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2011) Strength of hybrid composites reinforced with surface modified polymer/MWCNTs nano-composite interlayers. In: 18th International Conference on Composite Materials (ICCM18), Jeju Island, Korea

Bilge, Kaan and Papila, Melih (2014) Interlayer toughening mechanisms of composite materials. In: Qin, Qinghua and Ye, Jianqiao, (eds.) Toughening Mechanisms in Composite Materials. Elsevier - Woodhead Publishing, Amsterdam, Netherlands. ISBN 9781782422792 (Accepted)

Bilge, Kaan and Ürkmez, Ayça and Şimşek, Eren and Papila, Melih (2016) Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self-same nanocomposites. Journal of Applied Polymer Science, 133 (43). ISSN 0021-8995 (Print) 1097-4628 (Online)

Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih (2016) Sound-tracking of failure events in cross-ply composite laminates under tension. Composite Structures, 153 . pp. 421-427. ISSN 0263-8223 (Print) 1879-1085 (Online)

Bilge, Kaan and Yorulmaz, Yelda and Javanshour, Farzin and Ürkmez, Ayça and Yılmaz, Bengisu and Şimşek, Eren and Papila, Melih (2017) Synergistic role of in-situ crosslinkable electrospun nanofiber/epoxy nanocomposite interlayers for superior laminated composites. Composites Science and Technology, 151 . pp. 310-316. ISSN 0266-3538 (Print) 1879-1050 (Online)

Bilge, Ümit and Albey, Erinç and Beşikçi, Umut and Erbatur, Kemalettin and Aslan, Ayşe Nur (2015) Mathematical models for FMS loading and part type selection with flexible process plans. European Journal of Industrial Engineering, 9 (2). pp. 171-194. ISSN 1751-5254 (Print) 1751-5262 (Online)

Bilgin, Orhan and Çetinoğlu, Özlem and Oflazer, Kemal (2004) Building a wordnet for Turkish. Romanian Journal of Information Science and Technology, 7 (1-2). pp. 163-172. ISSN 1453-8245

Bilginer, Özlem (2005) Joint inventory and pricing decisions in retail industry. [Thesis]

Bilici, Eda and Saygın, Yücel (2016) Why do people (not) like me?: mining opinion influencing factors from reviews. (Accepted)

Birbil, Ş. İlker (2005) Challenges for sustainable urban transportation in Turkey. In: 35th International Conference on Computers & Industrial Engineering, İstanbul, Turkey

Birbil, Ş. İlker and Frenk, J. B. G. and Still, G. J. (2007) An elementary proof of the Fritz-John and Karush-Kuhn-Tucker conditions in nonlinear programming. European Journal of Operational Research, 180 (1). pp. 479-484. ISSN 0377-2217

Birdal, Tolga and Erçil, Aytül (2007) Real-time automated road, lane and car detection for autonomous driving. In: DSPincars 2007, Istanbul

Birkan, Burak (2013) Implementing multidisciplinary research center infrastructure. In: 59th Annual Technical Meeting of the Institute of Environmental Sciences and Technology (ESTECH 2013): Connect, Learn, Grow, Recharge, San Diego, California, USA

Bogosyan, Seta and Gadamsetty, Bindu and Gökasan, Metin and Şabanoviç, Asif and Ünel, Mustafa (2010) Experimental evaluation of sliding mode and EKF observers for network delay compensation in bilateral control. International Review of Electrical Engineering, 5 (5). pp. 2484-2493. ISSN 1827-6660

Budak, Ece Polen and Zırhlı, Onur and Stokes, Adam A. and Akbulut, Özge (2015) The breathing wall (brall): triggering life (in)animate surfaces. (Accepted)

Budak, Erhan (2004) High performance milling. In: Aerotrends 2004 Conference, Bilbao, Spain

Budak, Erhan and Tekeli, Erkin (2005) Maximizing chatter free material removal rate in milling through optimal selection of axial and radial depth of cut pairs. In: 55th General Assembly of CIRP, Antalya, Turkey

Bülbül, Kerem and Kaminsky, Philip and Yano, Candace (2004) Flow shop scheduling with earliness, tardiness and intermediate inventory holding costs. Naval research logistics, 51 (3). pp. 407-445. ISSN 0894-069X

Bülbül, Kerem and Kaminsky, Philip and Yano, Candace (2007) Preemption in single machine earliness/tardiness scheduling. Journal of scheduling, 10 (4-5). pp. 271-292. ISSN 1094-6136 (Print) 1099-1425 (Online)

C

Chouhan, Raghuraj Singh and Kolkar Mohammed, Javed Hussain Niazi and Qureshi, Anjum (2014) Chemical toxicity detection using quantum dot encoded E. coli cells. Sensors and Actuators B: Chemical, 196 . pp. 381-387. ISSN 0925-4005

Chouhan, Raghuraj Singh and Kolkar Mohammed, Javed Hussain Niazi and Qureshi, Anjum (2013) E. coli-quantum dot bioconjugates as whole-cell fluorescent reporters for probing cellular damage. Journal of Materials Chemistry B, 1 (21). pp. 2724-2730. ISSN 2050-7518 (Print) 2050-750X (Online)

D

Daş, Elif and Alkan Gürsel, Selmiye and Bayrakçeken Yurtcan, Ayşe (2020) Pt-alloy decorated graphene as an efficient electrocatalyst for PEM fuel cell reactions. Journal of Supercritical Fluids, 165 . ISSN 0896-8446 (Print) 1872-8162 (Online) Published Online First http://dx.doi.org/10.1016/j.supflu.2020.104962

Daş, Elif and Alkan Gürsel, Selmiye and Işıkel Şanlı, Lale and Bayrakçeken Yurtcan, Ayşe (2016) Comparison of two different catalyst preparation methods for graphene nanoplatelets supported platinum catalysts. International Journal of Hydrogen Energy, 41 (23). pp. 9755-9761. ISSN 0360-3199 (Print) 1879-3487 (Online)

Daş, Elif and Alkan Gürsel, Selmiye and Işıkel Şanlı, Lale and Bayrakçeken Yurtcan, Ayşe (2017) Thermodynamically controlled Pt deposition over graphene nanoplatelets: effect of Pt loading on PEM fuel cell performance. International Journal of Hydrogen Energy, 42 (30). pp. 19246-19256. ISSN 0360-3199 (Print) 1879-3487 (Online)

Daş, Elif and Yarar Kaplan, Begüm and Alkan Gürsel, Selmiye and Bayrakçeken Yurtcan, Ayşe (2019) Graphene nanoplatelets-carbon black hybrids as an efficient catalyst support for Pt nanoparticles for polymer electrolyte membrane fuel cells. Renewable Energy, 139 . pp. 1099-1110. ISSN 0960-1481

Demir, Ebru and İzci, Türker and Khudhayer, Wisam J. and Alagöz, Arif Sinan and Karabacak, Tansel and Koşar, Ali (2014) The effect of nanostructure distribution on subcooled boiling heat transfer enhancement over nanostructured plates integrated into a rectangular channel. Nanoscale and Microscale Thermophysical Engineering, 18 (4). pp. 313-328. ISSN 1556-7265 (Print) 1556-7273 (Online)

Demir, Ebru and Şeşen, Muhsincan and İzci, Türker and Khudhayer, Wisam and Karabacak, Tansel and Koşar, Ali (2013) Subcooled flow boiling over nanostructured plate integrated into a rectangular channel. In: 11th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2013), Sapporo, Japan

Demiriz, Ayhan and Ertek, Gürdal and Atan, Tankut and Kula, Ufuk (2011) Re-mining item associations: methodology and a case study in apparel retailing. Decision Support Systems, 52 (1). pp. 284-293. ISSN 0167-9236

Demirok, Ersin (2007) Vehicle routing problem with simultaneous delivery and pickup and intermediary delivery. [Thesis]

Demirok, Ersin and Çatay, Bülent (2007) Vehicle routing problem with simultaneous delivery and pick-up and intermediary delivery. In: 5th International Logistics & Supply Chain Congress, Istanbul

Dikyar, Serhat and Leblebici, Tuğba and Özçelik, Duruhan and Ünel, Mustafa and Şabanoviç, Asif and Bogosyan, Seta (2010) Delay compensation for nonlinear teleoperators using predictor observers. In: 36th Annual Conference of the IEEE Industrial Electronics Society (IECON 2010), Phoenix, Arizona, USA

Duran, Ertuğrul Tolga (2006) Analysis of shear heating and effect of temperature dependant viscosity on hydrodynamic lift of oil brush seals /. [Thesis]

Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk (2008) A study of brush seal oil pressure profile including temperature-viscosity effects. In: 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Hartford, CT, USA

E

Efe, Mehmet Önder and Ünel, Mustafa and Erbatur, Kemalettin and Kaynak, Ünver and Leblebicioğlu, Kemal (2015) İnsansız hava aracı projeleri ve kaynak sağlayan programlar üzerine (On UAV projects and funding agencies). In: Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı (TOK 2015), Pamukkale, Denizli

Elitaş, Meltem and Sadeghi, Sahl and Karamahmutoğlu, Hande and Gözüaçık, Devrim and Turhal, Nazım Serdar (2017) Microfabricated platforms to quantitatively investigate cellular behavior under the influence of chemical gradients. Biomedical Physics and Engineering Express, 3 (3). ISSN 2057-1976

Elitaş, Meltem and Şengül, Esra (2020) Quantifying heterogeneity according to deformation of the U937 monocytes and U937-differentiated macrophages using 3D carbon dielectrophoresis in microfluidics. Micromachines, 11 (6). ISSN 2072-666X

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory. Composite Structures, 223 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Engin, Billur Hatice and Çetinkaya, Mehveş and Ayiter, Elif and Germen, Murat and Balcısoy, Selim (2008) Maestro: design challenges for a group calendar. In: Information Visualisation, 2008. IV '08. 12th International Conference, London South Bank University

Erbatur, Kemalettin (2015) Fuzzy control of direct drive manipulators. In: Yu, Xinghuo and Efe, Mehmet Önder, (eds.) Recent Advances in Sliding Modes: From Control to Intelligent Mechatronics. Studies in Systems, Decision and Control, 24. Springer, Switzerland, pp. 371-401. ISBN 978-3-319-18289-6 (Print) 978-3-319-18290-2 (Online)

Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Yılmaz, Metin and Ünel, Mustafa and Kızıltaş, Güllü and Şabanoviç, Asif and Onat, Ahmet (2011) Design and control of the humanoid robot SURALP. Turkish Journal of Electrical Engineering and Computer Sciences, 19 (5). pp. 725-731. ISSN 1300-0632

Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Yılmaz, Metin and Ünel, Mustafa and Kızıltaş, Güllü and Şabanoviç, Asif and Onat, Ahmet (2009) İnsansı robot platformu SURALP. In: Otomatik Kontrol Ulusal Toplantısı 2009 (TOK'09), İstanbul, Türkiye

Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Yılmaz, Metin and Ünel, Mustafa and Kızıltaş, Güllü and Şabanoviç, Asif and Onat, Ahmet (2009) SURALP: a new full-body humanoid robot platform. In: IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2009), St. Louis, USA

Erçetin, Özgür and Ball, Michael O. and Tassiulas, Leandros (2004) Next generation satellite systems for aeronautical communications. International journal of satellite communications and networking, 22 (2). pp. 157-179. ISSN 1542-0973

Erçil, Aytül and Sağıroğlu, Mahmut Şamil (2006) Dizilim problemine dokusal tabanlı bir yaklaşım=a texture based approach to assembly problem. In: SIU 2006, Antalya

Erdem, Kaan and Ebrahimpour Ahmadi, Vahid and Koşar, Ali and Kuddusi, Lutfullah (2020) Differential sorting of microparticles using spiral microchannels with elliptic configurations. Micromachines, 11 (4). ISSN 2072-666X

Erdoğan, Hakan (2005) Regularizing linear discriminant analysis for speech recognition. In: Interspeech 2005, Lisbon/Portugal

Eren, Gönen and Aubreton, Olivier and Meriaudeau, Fabrice and Secades, L. A. Sanchez and Fofi, David and Naskali, A. Teoman and Truchetet, Frederic and Erçil, Aytül (2009) Scanning from heating: 3D shape estimation of transparent objects from local surface heating. Optics Express, 17 (14). pp. 11457-11468. ISSN 1094-4087

Eren, Gönen and Aubreton, Olivier and Meriaudeau, Fabrice and Secades, L. A. Sanchez and Fofi, David and Naskali, Ahmet Teoman and Truchetet, Frederic and Erçil, Aytül (2009) A 3D scanner for transparent glass. In: 15th International Conference on Image Analysis and Processing (ICIAP 2009), Salerno, Italy

Ertan, Ünal and Cheng, K. S. (2004) On the radio emission following the August 27 giant flare of SGR 1900+14. New astronomy, 9 (7). pp. 503-507. ISSN 1384-1076

Ertek, Gürdal (2007) Teaching warehousing concepts through interactive animations and 3D models. In: Lahmar, Maher, (ed.) Facility Logistics: Approaches and Solutions to Next Generation Challenges. Engineering and Management Innovation, 2. Auerbach, USA. ISBN 978-0849385186

Ertek, Gürdal and Kaya, Murat and Kefeli, Cemre and Onur, Özge and Uzer, Kerem (2012) Scoring and predicting risk preferences. In: Cao, Longbing and Yu, Philip S., (eds.) Behavior Computing: Modeling, Analysis, Mining and Decision. Springer, Berlin, pp. 143-163. ISBN 978-1-4471-2968-4 (Print) 978-1-4471-2969-1 (Online)

Ertek, Gürdal and Kuruca, Can and Aydın, Cenk and Erel, Besim Ferit and Doğan, Harun and Duman, Mustafa and Öcal, Mete and Ok, Zeynep Damla (2004) Visual and analytical mining of sales transaction data for production planning and marketing. In: 4th International Symposium on Intelligent Manufacturing Systems, Sakarya, Turkey

Ertek, Gürdal and Tunç, Murat Mustafa (2012) Re-mining association mining results through visualization, data envelopment analysis, and decision trees. In: Kahraman, Cengiz, (ed.) Computational Intelligence Systems in Industrial Engineering. Atlantis Computational Intelligence Systems; 6. Atlantis Press/Springer, Germany, pp. 601-622. ISBN 978-94-91216-76-3

Erzin, Engin and Yemez, Yücel and Tekalp, A. Murat and Erçil, Aytül and Erdoğan, Hakan and Abut, Hüseyin (2006) Multimodal person recognition for human-vehicle interaction. IEEE Multimedia, 13 (2). pp. 18-31. ISSN 1070-986X

Esin, Yeşim Hümay and Ünel, Mustafa (2010) Formation control of nonholonomic mobile robots using implicit polynomials and elliptic Fourier descriptors. Turkish Journal of Electrical Engineering & Computer Sciences, 18 (5). pp. 765-780. ISSN 1300-0632

Esmerdağ, Emir and Gürsoy, Mehmet Emre and İnan, Ali and Saygın, Yücel (2016) Explode: an extensible platform for differentially private data analysis. In: 16th International Conference on Data Mining Workshops (ICDMW), Barcelona, Spain

Evliyaoğlu, Kemal Oltun and Elitaş, Meltem (2017) Design and development of a self-adaptive, reconfigurable and low-cost robotic arm. In: 2nd International Conference on Mechatronics and Robotics Engineering (ICMRE), Nice, France

G

Ghobadi, Sajjad and Işıkel Şanlı, Lale and Bakhtiari, Rokhsareh and Alkan Gürsel, Selmiye (2017) Green composite papers via use of natural binders and graphene for PEM fuel cell electrodes. ACS Sustainable Chemistry and Engineering, 5 (9). pp. 8407-8415. ISSN 2168-0485

Ghobadi, Sajjad and Mehraeen, Shayan and Bakhtiari, Rokhsareh and Shamloo, Bahar and Sadhu, Veera Bhadraiah and Papila, Melih and Cebeci, Fevzi Çakmak and Alkan Gürsel, Selmiye (2016) PVA/PANI/rGO ternary electrospun mats as metal-free anti-bacterial substrates. RSC Advances, 6 (95). pp. 92434-92442. ISSN 2046-2069 (Print) 2046-2069 (Online)

Ghorbani, Morteza and Chen, Hongjian and Villanueva, Luis Guillermo and Grishenkov, Dmitry and Koşar, Ali (2018) Intensifying cavitating flows in microfluidic devices with poly(vinyl alcohol) (PVA) microbubbles. Physics of Fluids, 30 (10). ISSN 1070-6631 (Print) 1089-7666 (Online)

Ghorbani, Morteza and Deprem, Gökberk and Özdemir, Ece and Motezakker, Ahmad Reza and Villanueva, L. G. and Koşar, Ali (2019) On "cavitation on chip" in microfluidic devices with surface and sidewall roughness elements. Journal of Microelectromechanical Systems . ISSN 1057-7157 (Print) 1941-0158 (Online) Published Online First http://dx.doi.org/10.1109/JMEMS.2019.2925541

Ghorbani, Morteza and Sadaghiani, Abdolali Khalili and Yıldız, Mehmet and Koşar, Ali (2017) Experimental and numerical investigations on spray structure under the effect of cavitation phenomenon in a microchannel. Journal of Mechanical Science and Technology, 31 (1). pp. 235-247. ISSN 1738-494X (Print) 1976-3824 (Online)

Ghorbani, Morteza and Sheibani Aghdam, Araz and Talebian Gevari, Moein and Koşar, Ali and Cebeci, Fevzi Çakmak and Grishenkov, Dmitry and Svagan, Anna J. (2020) Facile hydrodynamic cavitation on chip via cellulose nanofibers stabilized perfluorodroplets inside layer-by-layer assembled slips surfaces. Chemical Engineering Journal, 382 . ISSN 1385-8947 (Print) 1873-3212 (Online)

Ghorbani, Morteza and Sözer, Canberk and Alcan, Gökhan and Ünel, Mustafa and Ekici, Sinan and Üvet, Hüseyin and Koşar, Ali (2018) Biomedical device prototype based on small scale hydrodynamic cavitation. AIP Advances, 8 (3). ISSN 2158-3226

Ghorbani, Morteza and Villanueva, Guillermo and Koşar, Ali (2018) An optimization study on thermal energy harvesting from micro cavitating flows. In: 6th Micro and Nano Flows Conference 2018, Atlanta, USA

Gökçe, Elif İlke (2004) A Revised ant colony system approach to vehicle routing problems /. [Thesis]

Grais, Emad Mounir and Erdoğan, Hakan (2011) Adaptation of speaker-specific bases in non-negative matrix factorization for single channel speech-music separation. In: 12th Annual Conference of the International Speech Communication Association (Interspeech 2011), Florence, Italy

Grais, Emad Mounir and Erdoğan, Hakan (2011) Single channel speech music separation using nonnegative matrix factorization with sliding windows and spectral masks. In: 12th Annual Conference of the International Speech Communication Association (Interspeech 2011), Florence, Italy

Grais, Emad Mounir and Erdoğan, Hakan (2011) Single channel speech music separation using nonnegative matrix factorization and spectral masks. In: 17th International Conference on Digital Signal Processing (DSP 2011), Corfu, Greece

Grais, Emad Mounir and Erdoğan, Hakan (2013) Spectro-temporal post-enhancement using MMSE estimation in NMF based single-channel source separation. In: 14th Annual Conference of the International Speech Communication Association (InterSpeech 2013), Lyon, France

Grais, Emad Mounir and Topkaya, İbrahim Saygın and Erdoğan, Hakan (2012) Audio-visual speech recognition with background music using single-channel source separation. In: 20th IEEE Conference on Signal Processing and Communications Applications (SIU2012), Mugla, Turkey

Güler, Enver and Sadeghi, Sahl and Alkan Gürsel, Selmiye (2018) Characterization and fuel cell performance of divinylbenzene crosslinked phosphoric acid doped membranes based on 4-vinylpyridine grafting onto poly(ethylene-co-tetrafluoroethylene) films. International Journal of Hydrogen Energy, 43 (16). pp. 8088-8099. ISSN 0360-3199 (Print) 1879-3487 (Online)

Günday, Gürhan (2007) Innovation models and implementations at firm level in manufacturing industry. [Thesis]

Günday, Gürhan and Ulusoy, Gündüz and Kılıç, Kemal and Alpkan, Lütfihak (2009) Determining the factor structure of an integrated innovation model. [Working Paper / Technical Report] Sabanci University ID:SU_FENS_2009/0009

Günday, Gürhan and Ulusoy, Gündüz and Kılıç, Kemal and Alpkan, Lütfihak (2009) Effects of innovation types on firm performance. [Working Paper / Technical Report] Sabanci University ID:SU_FENS_2009/0007

Günday, Gürhan and Ulusoy, Gündüz and Kılıç, Kemal and Alpkan, Lütfihak (2009) Innovative capabilities, operations priorities and corporate performance in manufacturing firms. [Working Paper / Technical Report] Sabanci University ID:SU_FENS_2009/0008

Gürbüz, Yaşar and Kaynak, Mehmet and Tekin, İbrahim and Bozkurt, Ayhan (2005) Low noise amplifier design using 0.35µm SiGe BiCMOS technology for IEEE 802.11a standard. In: IEEE Mediterranean Microwave Symposium , 2005, Greece - Athens

Gürsoy, Mehmet Emre and İnan, Ali and Nergiz, Mehmet Ercan and Saygın, Yücel (2016) Privacy-preserving learning analytics: challenges and techniques. (Accepted)

H

Hançer, Cevdet and Öner, Kaan Taha and Sırımoğlu, Efe and Çetinsoy, Ertuğrul and Ünel, Mustafa (2010) Robust hovering control of a quad tilt-wing UAV. In: 36th Annual Conference of the IEEE Industrial Electronics Society, Phoenix, Arizona, USA

Hançer, Cevdet and Öner, Kaan Taha and Sırımoğlu, Efe and Çetinsoy, Ertuğrul and Ünel, Mustafa (2010) Robust position control of a tilt-wing quadrotor. In: The 49th IEEE Conference on Decision and Control, Atlanta, Georgia, USA (Accepted)

Hızır, Ahmet Esat (2006) Using emission functions in mathematical programming models for sustainable urban transportation: an application in bilevel optimization. [Thesis]

Hocaoğlu, Muhammet Ali and Ünel, Mustafa (2008) HK segmentation of 3D micro-structures reconstructed from focus. In: Huang, D.-S., (ed.) Advanced Intelligent Computing Theories and Applications. With Aspects of Theoretical and Methodological Issues. Lecture Notes in Computer Science, 5226/2. Springer, Berlin / Heidelberg, pp. 1173-1180. ISBN 978-3-540-87440-9

Hosseinpour Shafaghi, Ali and Rokhsar Talabazar, Farzad and Koşar, Ali and Ghorbani, Morteza (2020) On the effect of the respiratory droplet generation condition on COVID-19 transmission. Fluids, 5 (3). ISSN 2311-5521

Hun, Şilan (2003) Algorithms for dynamic forward area allocation in a warehouse. [Thesis]

Husaini, MusAb Habib and Koçyiğit, Ahmet and Tapucu, Dilek and Yanıkoğlu, Berrin and Saygın, Yücel (2012) An aspect-lexicon creation and evaluation tool for sentiment analysis researchers. In: ECML PKDD 2012, Bristol, UK

J

Jamalabadi, Mohammad Yaghoub Abdollahzadeh and DaqiqShirazi, Mohammadreza and Koşar, Ali and Shadloo, Mostafa Safdari (2017) Effect of injection angle, density ratio, and viscosity on droplet formation in a microfluidic T-junction. Theoretical and Applied Mechanics Letters . ISSN 2095-0349 Published Online First http://dx.doi.org/10.1016/j.taml.2017.06.002

Jouan de Kervenoael, Ronan and Bisson, Christophe and Palmer, Mark (2015) Dissidents with an innovation cause? Non-institutionalized actors' online social knowledge sharing, solution-finding tensions and technology management innovation. Information Technology and People, 28 (3). pp. 653-676. ISSN 0959-3845 (Print) 1758-5813 (Online)

K

Kanero, Junko and Tunalı, Elif Tutku and Oranç, Cansu and Göksun, Tilbe and Küntay, Aylin C. (2021) When even a robot tutor Zooms: a study of embodiment, attitudes, and impressions. Frontiers in Robotics and AI, 8 . ISSN 2296-9144

Kaplan, Emre and Gürsoy, Mehmet Emre and Nergiz, Mehmet Ercan and Saygın, Yücel (2018) Location disclosure risks of releasing trajectory distances. Data and Knowledge Engineering, 113 . pp. 43-63. ISSN 0169-023X (Print) 1872-6933 (Online)

Karabatı, Selçuk and Akkan, Can (2006) Minimizing sum of completion times on a single machine with sequence-dependent family setup times. Journal of the operational research society, 57 (3). pp. 271-280. ISSN 0160-5682

Karakaya, Nursel and Papila, Melih and Özkoç, Güralp (2020) Effects of hot melt adhesives on the interfacial properties of overmolded hybrid structures of polyamide-6 on continuous carbon fiber/epoxy composites. Composites Part A: Applied Science and Manufacturing . ISSN 1359-835X (Print) 1878-5840 (Online) Published Online First http://dx.doi.org/10.1016/j.compositesa.2020.106106

Karakaya, Nursel and Papila, Melih and Özkoç, Güralp (2020) Overmolded hybrid composites of polyamide-6 on continuous carbon and glass fiber/epoxy composites: 'an assessment of the interface'. Composites Part A: Applied Science and Manufacturing, 131 . ISSN 1359-835X (Print) 1878-5840 (Online)

Karimzadehkhouei, Mehrdad and Ghorbani, Morteza and Sezen, Meltem and Şendur, Kürşat and Mengüç, M. Pınar and Leblebici, Yusuf and Koşar, Ali (2016) Increasing the stability of nanofluids with cavitating flows in micro orifices. Applied Physics Letters, 109 (10). pp. 247-251. ISSN 0003-6951 (Print) 1077-3118 (Online)

Karimzadehkhouei, Mehrdad and Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Akgönül, Sarp and Özbey, Arzu and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2019) Experimental and numerical investigation of inlet temperature effect on convective heat transfer of gamma-Al2O3/water nanofluid flows in microtubes. Heat Transfer Engineering, 40 (9-10). pp. 738-752. ISSN 0145-7632 (Print) 1521-0537 (Online)

Karimzadehkhouei, Mehrdad and Özbey, Arzu and MacKenzie-Dover, C. and Christy, John R. E. and Sefiane, Khellil and Koşar, Ali (2019) Investigation of single air bubble dynamics and the effect of nanoparticles in rectangular minichannels. Journal of Molecular Liquids, 279 . pp. 510-517. ISSN 0167-7322 (Print) 1873-3166 (Online)

Karimzadehkhouei, Mehrdad and Sezen, Meltem and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2017) Subcooled flow boiling heat transfer of gamma-Al2O3/water nanofluids in horizontal microtubes and the effect of surface characteristics and nanoparticle deposition. Applied Thermal Engineering, 127 . pp. 536-546. ISSN 1359-4311 (Print) 1873-5606 (Online)

Karimzadehkhouei, Mehrdad and Shojaeian, Mostafa and Khalili Sadaghiani, Abdolali and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2018) Entropy generation analysis of laminar flows of water-based nanofluids in horizontal minitubes under constant heat flux conditions. Entropy, 20 (4). ISSN 1099-4300

Karimzadehkhouei, Mehrdad and Yalçın, Sinan Eren and Şendur, Kürşat and Mengüç, Pınar and Koşar, Ali (2014) Heat transfer characteristics of nanofluids in horizontal microtubes. In: 5th International Conference on Heat Transfer and Fluid Flow in Microscale, Marseille, France

Karimzadehkhouei, Mehrdad and Yalçın, Sinan Eren and Şendur, Kürşat and Mengüç, Pınar and Koşar, Ali (2015) Pressure drop and heat transfer characteristics of nanofluids in horizontal microtubes under thermally developing flow conditions. Experimental Thermal and Fluid Science (SI), 67 . pp. 37-47. ISSN 0894-1777 (Print) 1879-2286 (Online)

Kasap, Nihat and Aytuğ, Haldun and Paul, Anand (2006) Minimizing makespan on a single machine subject to random breakdowns. Operations Research Letters, 34 (1). pp. 29-36. ISSN 0167-6377

Kasap, Suat and Kasap, Nihat (2005) Development of a database and decision support system for performance evaluation of soccer players. In: 35th International Conference on Computers and Industrial Engineering, Istanbul, Turkey

Kavlak, Nursel (2006) Client-contractor bargaining problem in the context of multi-mode project scheduling with limited resources. [Thesis]

Kaya, Alihan and Özdemir, Mehmed Rafet and Keskinöz, Mehmet and Koşar, Ali (2014) The effects of inlet restriction and tube size on boiling instabilities and detection of resulting premature critical heat flux in microtubes using data analysis. Applied Thermal Engineering, 65 (1-2). pp. 575-587. ISSN 1359-4311

Kaya, Alihan and Özdemir, Mehmed Rafet and Koşar, Ali (2013) High mass flux flow boiling and critical heat flux in microscale. International Journal of Thermal Sciences, 65 . pp. 70-78. ISSN 1290-0729

Kaygusuz, Doğukan and Vural, Sümeyra and Aytekin, Ali Özhan and Lucas, Stuart J. and Elitaş, Meltem (2019) DaimonDNA: a portable, low-cost loop-mediated isothermal amplification platform for naked-eye detection of genetically modified organisms in resource-limited settings. Biosensors and Bioelectronics . ISSN 0956-5663 (Print) 1873-4235 (Online) Published Online First http://dx.doi.org/10.1016/j.bios.2019.111409

Kayhan, Mehmet (2004) Tool wear under dynamic cutting conditions. [Thesis]

Kayhan, Mehmet and Budak, Erhan (2004) Investigating effects of chatter vibrations on tool wear in turning. In: 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy

Kaynar, Bahar (2006) Application of a general risk management model to portfolio problems with elliptical distributions /. [Thesis]

Kazmi, Mishal and Schüller, Peter and Saygın, Yücel (2017) Improving scalability of inductive logic programming via pruning and best-effort optimisation. Expert Systems with Applications, 87 . pp. 291-303. ISSN 0957-4174 (Print) 1873-6793 (Online)

Kefal, Adnan and Emami Tabrizi, Isa and Tansan, Murat and Kısa, Erdal and Yıldız, Mehmet (2021) An experimental implementation of inverse finite element method for real-time shape and strain sensing of composite and sandwich structures. Composite Structures, 258 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Keskin Özel, Merve and Laporte, Gilbert and Çatay, Bülent (2018) Electric vehicle routing problem with time dependent waiting times at recharging stations. In: 7th International Workshop on Freight Transportation and Logistics (ODYSSEUS 2018), Cagliari, Italy

Khalil, Islam S. M. and Çelebi, Beşir and Çevik, Gülnihal and Golubovic, Edin and Mehmet, B. and Şabanoviç, Asif (2011) Optimal motion control and vibration suppression of flexible systems with inaccessible outputs. In: IEEE International Conference of Mechatronics (ICM 2011), Istanbul, Turkey

Khalil, Islam S. M. and Golubovic, Edin and Şabanoviç, Asif (2011) High precision motion control of parallel robots with imperfections and manufacturing tolerances. In: IEEE International Conference of Mechatronics (ICM 2011), Istanbul, Turkey

Khalil, Islam S. M. and Nergiz, Ahmet Özcan and Şabanoviç, Asif (2011) A novel state observer for dynamical systems with inaccessible outputs. In: IEEE International Conference of Mechatronics (ICM 2011), Istanbul, Turkey

Khalili Sadaghiani, Abdolali and Koşar, Ali (2016) Numerical and experimental investigation on the effects of diameter and length on high mass flux subcooled flow boiling in horizontal microtubes. International Journal of Heat and Mass Transfer, 92 . pp. 824-837. ISSN 0017-9310 (Print) 1879-2189 (Online)

Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Kasap, Sibel and Kaya, İsmet İnönü and Koşar, Ali (2018) Foamlike 3D graphene coatings for cooling systems involving phase change. ACS Omega, 3 (3). pp. 2804-2811. ISSN 2470-1343

Khalili Sadaghiani, Abdolali and Şişman, Yağmur and Özaydın İnce, Gözde and Koşar, Ali (2016) An experimental study on flow boiling characteristics of phema nano-coated surfaces in a microchannel. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer (MNHMT2016), Biopolis, Singapore

Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2016) Numerical modeling of convective heat transfer of thermally developing nanofluid flows in a horizontal microtube. International Journal of Thermal Sciences, 109 . pp. 54-69. ISSN 1290-0729 (Print) 1778-4166 (Online)

Khan, Zaeema and Karamahmutoğlu, Hande and Elitaş, Meltem and Yüce, Meral and Budak, Hikmet (2019) Through the looking glass: real-time imaging in brachypodium roots and osmotic stress analysis. Plants, 8 (1). ISSN 2223-7747

Khodabakhsh, Mohammadreza and Şen, Canhan and Khassaf, Hamidreza and Gülgün, Mehmet Ali and Mısırlıoğlu, Burç (2014) Strong smearing and disappearance of phase transitions into polar phases due to inhomogeneous lattice strains induced by A-site doping in Bi(1-x)A(x)FeO(3) (A: La, Sm, Gd). Journal of Alloys and Compounds, 604 . pp. 117-129. ISSN 0925-8388 (Print) 1873-4669 (Online)

Kılıç, Kemal and Ertek, Gürdal (2006) Decision support for packing in warehouses. In: ISCIS 2006, 21th International Symposium, Istanbul, Turkey

Kılıç, Murat (2003) Multiobjective genetic algorithm approaches to project scheduling under risk. [Thesis]

Kılıç, Murat and Ulusoy, Gündüz and Sivrikaya Şerifoğlu, Funda (2004) Risk altında proje çizelgelemeye iki amaçlı genetik algoritma yaklaşımı. In: Yöneylem Araştırması ve Endüstri Mühendisliği XXIV. Ulusal Kongresi, Adana, Turkey

Kıvanç, Evren Burcu (2003) Modeling statics and dynamics of milling machine components. [Thesis]

Kızıleniş, Güler (2006) Optimal sensor locations in water distribution networks /. [Thesis]

Kim, Junyoung and Karakaş Schüller, Hacer Ezgi and Choi, Yong-Jun and Gözüaçık, Devrim and Cho, Yoon-Kyoung (2015) Kinetic study of autophagy activation in fibroblasts interacted with single tumor cell in microfluidic platform. In: Annual Autumn Meeting of The Korean BioChip Society, Gangwon, S. Korea

Kim, Junyoung and Karakaş Schüller, Hacer Ezgi and Choi, Yongjun and Gözüaçık, Devrim and Cho, Yoon-Kyoung (2016) Monitoring single tumor interactions with fibroblasts in autophagy activation. In: 8th International Conference on Microtechnologies in Medicine and Biology (MMB), Seoul, S. Korea

Koç, Bahattin and Küçükgül, Can and Özler, Saime Burçe and Altunbek, Mine and Sen, O. and Çulha, M. (2014) 3D Bioprinting of branched vessel constructs. In: Termis EU 2014 Congress, Genova, Italy

Koç, Bahattin and Özler, Saime Burçe and Küçükgül, Can and Altunbek, Mine and Sen, O. and Çulha, M. (2014) 3D Bioprinting of aortic structures with HDF cells. In: Termis EU 2014 Congress, Genova, Italy

Kolkar Mohammed, Javed Hussain Niazi and Pandey, Ashish and Gürbüz, Yaşar and Özgüz, Volkan Hüsnü and Qureshi, Anjum (2016) Cells-on-chip based transducer platform for probing toxicity of metal nanoparticles. Sensors and Actuators B: Chemical, 231 . pp. 659-665. ISSN 0925-4005

Koşar, Ali (2012) Flow boiling in microscale at high flowrates. In: 9th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM 2011), Edmonton, Canada

Koşar, Ali and Çıkım, Taha Abdullah and Özaydın İnce, Gözde and Armağan, Efe (2013) Flow boiling enhancement in microtubes with pHEMA coatings. In: ASME International Mechanical Engineering Congress and Exposition, San Diego, USA

Koşar, Ali and Schneider, Brandon and Peles, Yoav (2011) Hydrodynamic characteristics of crossflow over MEMS-based pillars. Journal of Fluids Engineering, 133 (8). ISSN 0098-2202 (print) ; 1528-901X (electronic)

Koşar, Ali and Şeşen, Muhsincan and Oral, Özlem and İtah, Zeynep and Gözüaçık, Devrim (2011) Bubbly cavitating flow generation and investigation of its erosional nature for biomedical applications. IEEE Transactions on Biomedical Engineering, 58 (5). pp. 1337-1346. ISSN 0018-9294

Koz, Mustafa and Koşar, Ali (2011) Parameter optimization of a micro heat sink with circular pin-fins. In: 8th International Conference on Nanochannels, Microchannels and Minichannels - 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Microchannels and Minichannels (FEDSM2010-ICNMM2010), Montreal, Canada

Koz, Mustafa and Koşar, Ali (2012) The effect of micro pin-fin shape on the heat transfer performance of micro pin-fin heat sinks. In: ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada

Koz, Mustafa and Özdemir, Mehmed Rafet and Koşar, Ali (2011) Parametric study on the effect of end walls on heat transfer and fluid flow across a micro pin-fin. International Journal of Thermal Sciences, 50 (6). pp. 1073-1084. ISSN 1290-0729

Köktürk, Utku (2004) Optimization of broaching tool design /. [Thesis]

Köktürk, Utku and Budak, Erhan (2004) Optimization of broaching tool geometry. In: International Seminar on Intelligent Computation i, Sorrento, Italy

Kumar, Baskaran Ganesh and Sadeghi, Sadra and Melikov, Rustamzhon and Mohammadi Aria, Mohammad and Bahmani Jalali, Houman and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) Structural control of InP/ZnS core/shell quantum dots enables high-quality white LEDs. Nanotechnology, 29 (34). ISSN 0957-4484 (Print) 1361-6528 (Online)

Kumatani, Kenichi and Ekenel, Hazım K. and Gao, Hua and Stiefelhagen, Rainer and Erçil, Aytül (2008) Multi-stream gaussian mixture model based facial feature localization=Çoklu gauss karışım modeli tabanlı yüz öznitelikleri bulma algoritması. In: IEEE 16th Signal Processing, Communication and Applications Conference, 2008. SIU 2008., Aydın, Turkey

Kundakcıoğlu, Erhun Ömer (2004) Classification via sequential testing. [Thesis]

Kurtoğlu, Evrim and Bilgin, Alp and Şeşen, Muhsincan and Mısırlıoğlu, Burç and Yıldız, Mehmet and Acar, Funda Yağcı and Koşar, Ali (2012) Ferrofluid actuation with varying magnetic fields for micropumping applications. Microfluidics and Nanofluidics (Sl), 13 (4). pp. 683-694. ISSN 1613-4982 (Print) 1613-4990 (Online)

Kurtoğlu, Evrim and Kaya, Alihan and Gözüaçık, Devrim and Acar, Funda Yağcı and Koşar, Ali (2014) Experimental study on convective heat transfer performance of iron oxide based ferrofluids in microtubes. Journal of Thermal Science and Engineering Applications, 6 (3). ISSN 1948-5085 (Print) 1948-5093 (Online)

Kurtoğlu, Evrim and Kaya, Alihan and Gözüaçık, Devrim and Acar, Funda Yağcı and Koşar, Ali (2013) Heat transfer enhancement with iron oxide nanoparticle based ferrofluids. In: 11th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2013), Sapporo, Japan

Küçük, Bilge (2003) A model for determining the number of storage blocks and block lengths in a rectangular warehouse. [Thesis]

Küçükgül, Can and Özler, Saime Burçe and İnci, İlyas and Karakaş, Hacer Ezgi and Irmak, Ster and Gözüaçık, Devrim and Taralp, Alpay and Koç, Bahattin (2015) 3D bioprinting of biomimetic aortic vascular constructs with self-supporting cells. Biotechnology and Bioengineering, 112 (4). pp. 811-821. ISSN 0006-3592 (Print) 1097-0290 (Online)

Küçükgül, Can and Özler, Saime Burçe and Karakaş, Hacer Ezgi and Gözüaçık, Devrim and Koç, Bahattin (2013) 3D hybrid bioprinting of macrovascular structures. In: 3rd ECCOMAS Thematic Conference on Tissue Engineering (ICTE 2013), Leiria, Portugal

Kümek, Mustafa (2007) Ship self air defense analysis for different operation conditions via simulation. [Thesis]

L

Lahe, Peyman and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Başdoğan, İpek (2021) Electromechanical analysis of functionally graded panels with surface-integrated piezo-patches for optimal energy harvesting. Composite Structures, 263 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Lotfan, Saeed and Biglari, Hasan and Choupani, Andisheh and Bediz, Bekir (2021) Dynamics of carbon nanotubes under thermally induced nanoparticle transport on helical tracks. Applied Mathematical Modelling, 93 . pp. 684-707. ISSN 0307-904X (Print) 1872-8480 (Online)

Lotfan, Saeed and Rafiei Anamagh, Mirmeysam and Bediz, Bekir (2021) A general higher-order model for vibration analysis of axially moving doubly-curved panels/shells. Thin-Walled Structures, 164 . ISSN 0263-8231 (Print) 1879-3223 (Online)

M

Massarwa, Eyass and Emami Tabrizi, Isa and Yıldız, Mehmet (2021) Mechanical behavior and failure of glass/carbon fiber hybrid composites: multiscale computational predictions validated by experiments. Composite Structures, 260 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Mataracı, Berat and Ertek, Gürdal (2006) Spreadsheet optimization of flow for WIP goods at a yarn and tire cord manufacturer:. In: 5th International Symposium on Intelligent Manufacturing Systems, Sakarya, Turkey, Sakarya, Turkey

Mehraeen, Shayan and Alkan Gürsel, Selmiye and Papila, Melih and Cebeci, Fevzi Çakmak (2017) Investigation of electrochemical actuation by polyaniline nanofibers. Smart Materials and Structures, 26 (9). ISSN 0964-1726 (Print) 1361-665X (Online)

Mehraeen, Shayan and Taşdemir, Adnan and Alkan Gürsel, Selmiye and Yürüm, Alp (2018) Homogeneous growth of TiO2-based nanotubes on nitrogen-doped reduced graphene oxide and its enhanced performance as a Li-ion battery anode. Nanotechnology, 29 (25). ISSN 0957-4484 (Print) 1361-6528 (Online)

Mısırlıoğlu, Burç and Yıldız, Mehmet and Şendur, Kürşat (2015) Domain control of carrier density at a semiconductor-ferroelectric interface. Scientific Reports, 5 . ISSN 2045-2322

Mohamadi, Mahboube and Garmabi, Hamid and Papila, Melih (2017) Conjugated dual-phase transitions in crystalline/crystalline blend of poly(vinylidene fluoride)/poly(ethylene oxide). Polymer Bulletin, 74 (6). pp. 2117-2135. ISSN 0170-0839 (Print) 1436-2449 (Online)

Mohamadi, Mahboube and Garmabi, Hamid and Papila, Melih (2016) Effect of miscibility state on crystallization behavior and polymorphism in crystalline/crystalline blends of poly(vinylidene fluoride)/poly(ethylene oxide). Macromolecular Research, 24 (8). pp. 698-709. ISSN 1598-5032 (Print) 2092-7673 (Online)

Mohamadi, Mahboube and Papila, Melih and Garmabi, Hamid and Goharibajestani, Zahra (2019) Morphological evaluation and phase behavior of PVDF/PEO blends in the presence of graphene nanoplatelets through rheological measurements. Journal of Applied Polymer Science . ISSN 0021-8995 (Print) 1097-4628 (Online) Published Online First http://dx.doi.org/10.1002/app.48017

Mohammadi, Ali and Koşar, Ali (2016) Hydrodynamic and thermal characteristics of the flow inside a rectangular microchannel with different cylindrical micro pin fins. In: 14th International Conference on Nanochannels, Microchannels, and Minichannels, Washington DC (Accepted)

Mohammadi, Ali and Koşar, Ali (2016) Hydrodynamic and thermal performance of microchannels with different in-line arrangements of cylindrical micropin fins. Journal of Heat Transfer, 138 (12). ISSN 0022-1481 (Print) 1528-8943 (Online)

Mohammadi, Ali and Koşar, Ali (2018) Review on heat and fluid flow in micro pin fin heat sinks under single-phase and two-phase flow conditions. Nanoscale and Microscale Thermophysical Engineering . ISSN 1556-7265 (Print) 1556-7273 (Online) Published Online First http://dx.doi.org/10.1080/15567265.2018.1475525

Mohammadi, Ali and Koşar, Ali (2020) The effect of arrangement type and pitch ratio on the performance of micro-pin-fin heat sinks. Journal of Thermal Analysis and Calorimetry, 140 (3). pp. 1057-1068. ISSN 1388-6150 (Print) 1572-8943 (Online)

Mokkapati, Raghu Sarma and Köseoğlu İmer, Derya Yüksel and Yılmaz, Nurmiray and Özgüz, Volkan Hüsnü and Koyuncu, İsmail (2015) Protein mediated textile dye filtration using graphene oxide-polysulfone composite membranes. RSC Advances, 5 (87). pp. 71011-71021. ISSN 2046-2069 (Print) 2046-2069 (Online)

Motezakker, Ahmad Reza and Khalili Sadaghiani, Abdolali and Akkoç, Yunus and Semsari Parapari, Sorour and Gözüaçık, Devrim and Koşar, Ali (2017) Surface modifications for phase change cooling applications via crenarchaeon Sulfolobus solfataricus P2 bio-coatings. Scientific Reports, 7 . ISSN 2045-2322

Motezakker, Ahmad Reza and Khalili Sadaghiani, Abdolali and Çelik, Süleyman and Larsen, Tom and Villanueva, Luis Guillermo and Koşar, Ali (2019) Optimum ratio of hydrophobic to hydrophilic areas of biphilic surfaces in thermal fluid systems involving boiling. International Journal of Heat and Mass Transfer, 135 . pp. 164-174. ISSN 0017-9310 (Print) 1879-2189 (Online)

N

Naskali, Ahmet Teoman and Kunt, Emrah Deniz and Shoukry Mohammed Khalil, Islam and Yüksel, Ebubekir and Şabanoviç, Asif (2010) SU mikro montaj istasyonu gerçek zamanlı kontrol mimarisi. In: Otomatik Kontrol Ulusal Toplantısı 2010 (TOK'2010), Gebze, Kocaeli

Nedaei, Masoumeh and Armağan, Efe and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali (2016) Enhancemet of flow boiling heat transfer in pHEMA/pPFDA coated microtubes with longitudinal variations in wettability. AIP Advances, 6 (3). ISSN 2158-3226

Nedaei, Masoumeh and Motezakker, Ahmad Reza and Zeybek, Mehmet Can and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali (2017) Subcooled flow boiling heat transfer enhancement using polyperfluorodecylacrylate (pPFDA) coated microtubes with different coating thicknesses. Experimental Thermal and Fluid Science, 86 . pp. 130-140. ISSN 0894-1777 (Print) 1879-2286 (Online)

Nedaei, Masoumeh and Saadi, Nawzat and Karabacak, Tansel and Koşar, Ali (2017) Nucleate boiling heat transfer investigation using micro and nanostructured plates. In: 3rd World Congress on Mechanical, Chemical, and Material Engineering (MCM'17), Rome, Italy

Negin, Farhood and Özdemir, Fırat and Yüksel, Kamer Ali and Akgül, Ceyhun Burak and Erçil, Aytül (2013) A decision forest based feature selection framework for action recognition from RGB-Depth cameras. In: 21st Signal Processing and Communications Applications Conference (SIU 2013), Haspolat, Cyprus

Nergiz, Zeynep Saide and Kızıltaş, Güllü (2007) Optimization of dry powder deposition parameters for the production of dielectric and magneto-dielectric composites. In: Materials Science & Technology 2007 Conference and Exhibit, Detroit, Michigan

Nowroozi, Ehsan and Mekdad, Yassine and Berenjestanaki, Mohammad Hajian and Conti, Mauro and El Fergougui, Abdeslam (2022) Demystifying the transferability of adversarial attacks in computer networks. IEEE Transactions on Network and Service Management . ISSN 1932-4537 Published Online First http://dx.doi.org/10.1109/TNSM.2022.3164354

Noyan, Nilay and Rudolf, Gábor and Ruszczynski, Andrzej (2006) Relaxations of linear programming problems with first order stochastic dominance constraints. Operations research letters, 34 (6). pp. 653-659. ISSN 0167-6377

Noyan, Nilay and Ruszczynski, Andrzej (2008) Valid inequalities and restrictions for stochastic programming problems with first order stochastic dominance constraints. Mathematical programming, 114 (2). pp. 249-275. ISSN 0025-5610 (Print) 1436-4646 (Online)

O

Oflezer, Öykü (2002) Operations reversal: An Investigation of capacitated and uncapacitated models. [Thesis]

Okatan, M. B. and Mısırlıoğlu, Burç and Alpay, S. P. (2010) Contribution of space charges to the polarization of ferroelectric superlattices and its effect on dielectric properties. Physical Review B: Condensed Matter and Materials Physics, 82 (9). ISSN 1098-0121

Orhun, Kara and Kardaş, Süleyman and Bingöl, Muhammed Ali and Avoine, Gildas (2010) Optimal security limits of RFID distance bounding protocols. In: 6th Workshop on RFID Security (RFIDSec10), Istanbul, Turkey

P

Papila, Melih (2018) Design of and with thin-ply non-crimp fabric as building blocks for composites. Science and Engineering of Composite Materials, 25 (3). pp. 501-516. ISSN 0792-1233 (Print) 2191-0359 (Online)

Papila, Melih (2020) Double-double laminated skin/grid architecture in structural composite design. Project Report. Tübitak.

Pehlivan, Ahmet Selim and Erbatur, Kemalettin (2020) Genetic algorithm optimization of PID pitch angle controller for a 2 MW wind turbine. In: International 2nd Conference on Sustainable Energy and Energy Calculations (ICSEEC2020), Online Live Conference

Pehlivan, Ahmet Selim and Erbatur, Kemalettin (2020) Performance comparison of pitch angle controllers for 2 MW wind turbine. In: International 2nd Conference on Sustainable Energy and Energy Calculations (ICSEEC2020), Online Live Conference

Pourakbar, M. and Frenk, J. B. G. and Dekker, R. (2012) End-of-life inventory decisions for consumer electronics service parts. Production and Operations Management, 21 (5). pp. 889-906. ISSN 1059-1478 (Print) 1937-5956 (Online)

Prom-u-thai, C. and Huang, L. and Çakmak, İsmail and Rerkasem, B. (2011) Simultaneous fortification of iron and zinc in parboiled rice kernel. ScienceAsia, 37 (4). pp. 296-302. ISSN 1513-1874

R

Rabiger, Stefan and Kazmi, Mishal and Saygın, Yücel and Schüller, Peter and Spiliopoulou, Myra (2016) SteM at SemEval-2016 task 4: applying active learning to improve sentiment classification. In: 10th International Workshop on Semantic Evaluation (SemEval-2016), San Diego, CA, USA

Rabiger, Stefan and Spiliopoulou, Myra and Saygın, Yücel (2018) How do annotators label short texts? toward understanding the temporal dynamics of tweet labeling. Information Sciences, 457 . pp. 29-47. ISSN 0020-0255 (Print) 1872-6291 (Online)

Rajabalizadeh Mojarrad, Naeimeh and Sadeghi, Sahl and Yarar Kaplan, Begüm and Güler, Enver and Alkan Gürsel, Selmiye (2020) Metal-salt enhanced grafting of vinylpyridine and vinylimidazole monomer combinations in radiation grafted membranes for high-temperature PEM fuel cells. ACS Applied Energy Materials, 3 (1). pp. 532-540. ISSN 2574-0962

Reisman, Arnold and Konduk, Burak Cem and Oral, Muhittin (2005) Meta research in OR/MS: a taxonomy, bibliography and classification of the literature. International Journal of Operations and Quantitative Management, 12 (1). ISSN 1082-1910

Römheld, V. and Guldner, M. G. and Yamada, T. and Öztürk, Levent and Çakmak, İsmail and Neumann, G. (2005) Relevance of glyphosate in the rhizosphere of non-target plants in. In: XV international plant nutrition colloquium, China

S

Sadaghiani, Abdolali Khalili and Altay, Rana and Noh, H. and Kwak, H. J. and Şendur, Kürşat and Mısırlıoğlu, Burç and Park, H. S. and Koşar, Ali (2020) Effects of bubble coalescence on pool boiling heat transfer and critical heat flux - a parametric study based on artificial cavity geometry and surface wettability. International Journal of Heat and Mass Transfer, 147 . ISSN 0017-9310 (Print) 1879-2189 (Online)

Sadaghiani, Abdolali Khalili and Rajabnia, Hossein and Çelik, Süleyman and Noh, H. and Kwak, H. J. and Nejatpour, Mona and Park, Hyun Sun and Acar, H. Y. and Mısırlıoğlu, Burç and Özdemir, Mehmed Rafet and Koşar, Ali (2020) Pool boiling heat transfer of ferrofluids on structured hydrophilic and hydrophobic surfaces: the effect of magnetic field. International Journal of Thermal Sciences, 155 . ISSN 1290-0729 (Print) 1778-4166 (Online)

Sadaghiani, Abdolali Khalili and Saadi, Nazwat S. and Semsari Parapari, Sorour and Karabacak, Tansel and Keskinöz, Mehmet and Koşar, Ali (2017) Boiling heat transfer performance enhancement using micro and nano structured surfaces for high heat flux electronics cooling systems. Applied Thermal Engineering, 127 . pp. 484-498. ISSN 1359-4311 (Print) 1873-5606 (Online)

Sadeghi, Sadra and Bahmani Jalali, Houman and Melikov, Rustamzhon and Kumar, Baskaran Ganesh and Mohammadi Aria, Mohammad and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) Stokes-shift-engineered indium phosphide quantum dots for efficient luminescent solar concentrators. ACS Applied Materials & Interfaces, 10 (15). pp. 12975-12982. ISSN 1944-8244 (Print) 1944-8252 (Online)

Sadeghi, Sahl and Işıkel Şanlı, Lale and Güler, Enver and Alkan Gürsel, Selmiye (2018) Enhancing proton conductivity via sub-micron structures in proton conducting membranes originating from sulfonated PVDF powder by radiation-induced grafting. Solid State Ionics, 314 . pp. 66-73. ISSN 0167-2738 (Print) 1872-7689 (Online)

Sağıroğlu, Mahmut Şamil and Erçil, Aytül (2010) Optimization for automated assembly of puzzles. Top, 18 (2). pp. 321-338. ISSN 1134-5764 (Print) 1863-8279 (Online)

Sahin, Turker and Ünel, Mustafa (2008) Stable algebraic surfaces for 3D object representation. Journal of Mathematical Imaging and Vision, 32 (2). pp. 127-137. ISSN 0924-9907 (Print) 1573-7683 (Online)

Saner Okan, Burcu and Marset Castro, Azucena and Seyyed Monfared Zanjani, Jamal and Akkuş Sut, Pınar and Şen, Özlem and Çulha, Mustafa and Menceloğlu, Yusuf Z. (2016) Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l-lactide-co-ε-caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation. Journal of Applied Polymer Science, 133 (22). ISSN 0021-8995 (Print) 1097-4628 (Online)

Sarabi, Misagh Rezapour and Bediz, Bekir and Falo, Louis D. and Korkmaz, Emrullah and Tasoğlu, Savaş (2021) 3D printing of microneedle arrays: challenges towards clinical translation. Journal of 3D Printing in Medicine, 5 (2). pp. 65-70. ISSN 2059-4755 (Print) 2059-4763 (Online)

Sarıgöl, İlkan and Çatay, Bülent (2007) A clustering based heuristic for location routing problems. In: 5th International Logistics & Supply Chain Congress,

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Birol, Feriha S. (2008) A study on wear rates of 100Cr6 steel running against sintered steel surfaces under dry and starved lubrication. In: The 47th Annual Conference of Metallurgists, COM 2008, Winnipeg, Manitoba, Canada

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpicci, Hüsnü (2008) Tribological behavior of sintered steel under starved lubrication in R600A environment. In: 2nd International Conference on Advanced Tribology, iCAT 2008, Singapore

Saygın, Yücel and Nergiz, Mehmet Ercan (2010) Condensation-based methods in emerging application domains. In: Bonchi, Francesco and Ferrari, Elena, (eds.) Privacy-Aware Knowledge Discovery: Novel Applications and New Techniques. CRC Press, Boca Raton, FL, USA. ISBN 9781439803653 ; 143980365X

Saygın, Yücel and Reisman, Arnold and Wang, Yungtong (2004) Value of information gained from data mining in the context of information sharing. IEEE Transactions on Engineering Management, 51 (4). pp. 441-450. ISSN 0018-9391

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. (2016) Manufacturing of multilayer graphene oxide/poly(ethylene terephthalate) nanocomposites with tunable crystallinity, chain orientations and thermal transitions. Materials Chemistry and Physics, 176 . pp. 58-67. ISSN 0254-0584 (Print) 1879-3312 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Self-healing thermosetting composites: concepts, chemistry and future advances. In: Delville, Marie-Helene and Taubert, Andreas, (eds.) Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials. Wiley, UK. ISBN 9783527342556 (Print) 9783527807130 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Yılmaz, Çağatay and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2017) Monitoring the interface and bulk self-healing capability of tri-axial electrospun fibers in glass fiber reinforced epoxy composites. Composites Part A: Applied Science and Manufacturing, 99 . pp. 221-232. ISSN 1359-835X (Print) 1878-5840 (Online)

Sezen, Meltem (2016) Focused ion beams (FIB): novel methodologies and recent applications for multidisciplinary sciences. In: Janeček, Miloš and Kral, Robert, (eds.) Modern Electron Microscopy in Physical and Life Sciences. InTech, Rijeka, Croatia. ISBN 978-953-51-2252-4

Sezer, Osman Gökhan and Erçil, Aytül and Ertüzün, Ayşın (2007) Using perceptual relation of regularity and anisotropy in the texture with independent component model for defect detection. Pattern recognition, 40 (1). pp. 121-133. ISSN 0031-3203

Sezer, Osman Gökhan and Ertüzün, Ayşın and Erçil, Aytül (2004) Independent component analysis for texture defect detection. Pattern Recognition and Image Analysis, 14 (2). pp. 303-307. ISSN 1054-6618

Shawuti, Shalima and Difiglio, Carmine and Esmaeilialiabadi, Danial and Gülgün, Mehmet Ali and Öncel, Çınar and Yeşilyurt, Serhat (2018) Using natural gas as an environmentally sustainable power source with solid oxide fuel cells. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Sheibani Aghdam, Araz and Ghorbani, Morteza and Deprem, Gökberk and Cebeci, Fevzi Çakmak and Koşar, Ali (2019) A new method for intense cavitation bubble generation on layer-by-layer assembled slips. Scientific Reports, 9 . ISSN 2045-2322

Shojaeian, Mostafa and Koşar, Ali (2013) Numerical investigation of fully developed fluid flow and heat transfer in double-trapezoidal microchannels. In: ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, California, USA

Shojaeian, Mostafa and Koşar, Ali (2017) Numerical investigation of slip flows through 2-d u-shaped microchannels. In: ASME International Mechanical Engineering Congress and Exposition (IMECE2016), Phoenix, Arizona

Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2014) Heat transfer characteristics of plug flows with temperature-jump boundary conditions in parallel-plate channels and concentric annuli. International Journal of Thermal Sciences, 84 . pp. 252-259. ISSN 1290-0729 (Print) 1778-4166 (Online)

Simpson, Adam John (2014) Bridging the gap between prep classes and freshman year. In: Sarp Simpson, Çağla, (ed.) Innovations in English Language Teaching and Learning: The Turkish Perspective. Crowd Source ELT, Istanbul, Turkey, pp. 138-150. ISBN 978-605-86489-0-6

Simpson, Adam John (2013) Email English (2nd Edition) by Paul Emmerson. [Book Review]

Simpson, Adam John (2013) Leveraging young learners' use of technology. International Teacher Development Institute .

Simpson, Adam John (2014) The 10 commandments of teaching 'generation Y' with technology. Humanising Language Teaching, 16 (6). ISSN 1755-9715

Simpson, Adam John (2016) The successful incorporation of blended learning into the language curriculum. Advanced Education, 3 (5). pp. 96-107. ISSN 2409-3351 (Print) 2410-8286 (Online)

Simpson, Adam John and Dodigovic, Marina (2014) How to teach generation Y with technology. In: Dodigovic, Marina, (ed.) Attitudes to Technology in ESL/EFL Pedagogy. TESOL Arabia Publications, Dubai, United Arab Emirate, pp. 333-341. ISBN 978-9948-20-690-3

Solda, Giulia and Makunin, Igor V. and Sezerman, Uğur and Corradin, Alberto and Corti, Giorgio and Guffanti, Alessandro (2009) An Ariadne's thread to the identification and annotation of noncoding RNAs in eukaryotes. Briefings in Bioinformatics, 10 (5). pp. 475-489. ISSN 1467-5463

Soldea, Octavian and Ekin, Ahmet and Soldea, Diana F. and Ünay, Devrim and Çetin, Müjdat and Erçil, Aytül and Uzunbaş, Mustafa Gökhan and Fırat, Zeynep and Cihangiroğlu, Mutlu and Initiative, The Alzheimers Disease Neuroimaging (2010) Segmentation of anatomical structures in brain MR images using atlases in FSL - a quantitative approach. In: 20th International Conference on Pattern Recognition (ICPR), Istanbul, Turkey

Soldea, Octavian and Ünel, Mustafa and Erçil, Aytül (2010) Moments of elliptic fourier descriptors. In: 20th International Conference on Pattern Recognition (ICPR), Istanbul, Turkey

Stallkamp, Johannes and Ekenel, Hazım Kemal and Erdoğan, Hakan and Stiefelhagen, Rainer and Erçil, Aytül (2007) Video-based driver identification using local appearance face recognition. In: DSPincars 2007,

T

Tabak, Ahmet Fatih and Solak, Altuğ and Erdem, Emine Yegan and Akcan, Caner and Yeşilyurt, Serhat (2007) Simulation-based analysis of 3D flow inside a micropump with passive valves. In: 2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, USA

Tacettin, Mustafa (2002) A Polynomial transformation from vertex cover problem to exact inference problem in bayesian belief networks. [Thesis]

Tajeddin, Alireza and Mustafaoğlu, Nur (2021) Design and fabrication of organ-on-chips: promises and challenges. Micromachines, 12 (12). ISSN 2072-666X

Talebian Gevari, Moein and Abbasiasl, Taher and Niazi, Soroush and Ghorbani, Morteza and Koşar, Ali (2020) Direct and indirect thermal applications of hydrodynamic and acoustic cavitation: a review. Applied Thermal Engineering, 171 . ISSN 1359-4311

Talebian Gevari, Moein and Ghorbani, Morteza and Svagan, Anna J. and Grishenkov, Dmitry and Koşar, Ali (2019) Energy harvesting with micro scale hydrodynamic cavitation-thermoelectric generation coupling. AIP Advances, 9 (10). ISSN 2158-3226

Talebian Gevari, Moein and Hosseinpour Shafaghi, Ali and Villanueva, Guillermo and Ghorbani, Morteza and Koşar, Ali (2020) Engineered lateral roughness element implementation and working fluid alteration to intensify hydrodynamic cavitating flows on a chip for energy harvesting. Micromachines, 11 (1). ISSN 2072-666X

Talebian Gevari, Moein and Parlar, Ayhan and Torabfam, Milad and Koşar, Ali and Yüce, Meral and Ghorbani, Morteza (2020) Influence of fluid properties on intensity of hydrodynamic cavitation and deactivation of salmonella typhimurium. Processes, 8 (3). ISSN 2227-9717

Tansuğ, Tuğrul and Taşkın, Elif and Kurt, Eray and Elitaş, Meltem (2019) Design and development of a multi-functional laparoscopic device. Journal of Mechanics Engineering and Automation . pp. 173-176. ISSN 2159-5275 (Print) 2159-5283 (Online)

Taşkıran, Duygu (2006) A revised multiple ant colony system for vehicle routing problems with time windows. [Thesis]

Taşkıran, Evrim and Seven, Utku and Koca, Özer and Yılmaz, Metin and Erbatur, Kemalettin (2009) Walking control of a biped robot on an inclined plane. In: ICONS 2009 - The 2nd International Conference on Intelligent Systems and Control, Istanbul, Turkey

Tekeli, Alper and Budak, Erhan (2004) Increasing chatter free material removal rate in die and mold machining. In: 7th International Symposium on Advances in Abrasive Technology, Bursa/Turkey

Tekeli, Alper and Budak, Erhan (2005) Maximization of chatter-free material removal rate in end milling using analytical methods. Machining science and technology, 9 (2). pp. 147-167. ISSN 1091-0344 print / 1532-2483 online

Teker, Demet (2002) An Exploratory study into the manufacturing strategies in the Turkish machine manufacturing industry. [Thesis]

Tekin, İbrahim (2005) UWB microstrip filter design using a time-domain technique. Microwave and Optical Technology Letters, 47 (4). pp. 387-391. ISSN 0895-2477 (Print) 1098-2760 (Online)

Tekiner, Hatice (2006) Robust crew pairing for managing extra flights /. [Thesis]

Tekiner, Hatice and Birbil, Ş. İlker and Bülbül, Kerem (2009) Robust crew pairing for managing extra flights. Computers & Operations Research, 36 (6). pp. 2031-2048. ISSN 0305-0548

Timuçin, Can and Gül, Özgür and Kütük, Özgür and Başağa, Hüveyda (2012) Antibody array-based immunosensor for detecting cardiovascular disease risk markers. Journal of Immunoassay and Immunochemistry, 33 (3). pp. 275-290. ISSN 1532-1819

Tunç, Lütfi Taner (2016) Rapid extraction of machined surface data through inverse geometrical solution of tool path information. International Journal of Advanced Manufacturing Technology, 87 (1-4). pp. 353-362. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Taner L. (2006) Geometrical Analysis and Optimization of 5-Axis Milling Processes. [Thesis]

Tunç, Taner L. and Budak, Erhan (2009) Extraction of 5-axis milling conditions from CAM data for process simulation. International Journal of Advanced Manufacturing Technology, 43 (5-6). pp. 538-550. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunçalp, Deniz and Öncü, Ahmet and Denizel, Meltem (2005) Recursive dualism of technology: reconstructing the process of technology adaptation in organizations. In: The 21st EGOS Colloquium 2005, European Group for Organizational Studies, Berlin, Germany

Türkseven, Can Hulusi and Ertek, Gürdal (2003) Simulation modeling for quality and productivity in steel cord manufacturing. In: 2003 Winter Simulation Conference, New Orleans, Louisiana, USA

U

Ulus, Firdevs and Köse, Özlem and Ertek, Gürdal and Şen, Simay (2006) Financial benchmarking of transportation companies in the New York Stock Exchange (NYSE) through data envelopment analysis (DEA) and visualization. In: 4th International Logistics and Supply Chain Congress, İzmir, Turkey

Ulusoy, Gündüz and Günday, Gürhan and Kılıç, Kemal and Alpkan, Lütfihak (2009) An empirical study into the determinants of innovativeness in manufacturing firms. In: 3rd International Conference on Innovation, Technology and Knowledge Economics, Ankara, Turkey

Ulusoy, Gündüz and Kılıç, Kemal and Özlü, Emre and Altekin, Fatma Tevhide and Çatay, Bülent and Budak, Erhan and Pasin, Merih and Karaata, Enver Selçuk and Varandi, Siamak (2017) Sanayide Dijitalleşme Stratejileri Çalıştayı - Taslak rapor. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Uzbaş, Fatma and Sezerman, Uğur and Hartl, Lukas and Kubicek, Christian P. and Seiboth, Bernhard (2012) A homologous production system for Trichoderma reesei secreted proteins in a cellulase-free background. Applied Microbiology and Biotechnology, 93 (4). pp. 1601-1608. ISSN 0175-7598 (print) ; 1432-0614 (online)

V

Vural, Arif Volkan (2003) A GA based meta-heuristic for capacitated vehicle routing problem with simultaneous pick-up and deliveries. [Thesis]

Vural, Arif Volkan and Çatay, Bülent and Ekşioğlu, B. (2005) A dual GA approach to capacitated vehicle routing problem with simultaneous pick-up and deliveries. In: IIE Annual Conference 2005, Atlanta-GA, USA

Vural, Esra and Bartlett, Marian and Littlewort, Gwen and Çetin, Müjdat and Erçil, Aytül and Movellan, Javier (2010) Discrimination of moderate and acute drowsiness based on spontaneous facial expressions. In: 20th International Conference on Pattern Recognition (ICPR), Istanbul, Turkey

Vural, Esra and Çetin, Müjdat and Erçil, Aytül and Littlewort, Gwen and Bartlett, Marian and Movellan, Javier (2008) Automated drowsiness detection for improved driving safety. In: ICAT 2008: International Conference on Automotive Technologies, Istanbul

Y

Yarar Kaplan, Begüm and Haghmoradi, Navid and Jamil, Esaam and Merino, Cesar and Alkan Gürsel, Selmiye (2020) Platinum nanoparticles decorated carbon nanofiber hybrids as highly active electrocatalysts for polymer electrolyte membrane fuel cells. lnternational Journal of Energy Research . ISSN 0363-907X (Print) 1099-114X (Online) Published Online First http://dx.doi.org/10.1002/er.5646

Yarar Kaplan, Begüm and Işıkel Şanlı, Lale and Alkan Gürsel, Selmiye (2017) Flexible carbon–cellulose fiber-based composite gas diffusion layer for polymer electrolyte membrane fuel cells. Journal of Materials Science, 52 (9). pp. 4968-4976. ISSN 0022-2461 (Print) 1573-4803 (Online)

Yazıcıgil, Onur and Senan, Emre Müze Mono Variable Font. [Creative Activity in Art and Design]

Yazıcıgil, Onur Fatih Hey moments typeface design project. [Creative Activity in Art and Design]

Yeniterzi, Süveyda and Sezerman, Uğur (2009) Enzyminer: automatic identification of protein level mutations and their impact on target enzymes from PubMed abstracts. BMC Bioinformatics, 10 (Supple). ISSN 1471-2105

Yeşilyurt, Serhat (2007) Three-dimensional simulations of transient response of PEM fuel cells. In: 2007 ASME International Mechanical Engineering Congress and Exhibition, Seattle, Washington, USA

Yetişgin, Abuzer Alp and Çetinel, Sibel and Zuvin, Merve and Koşar, Ali and Kutlu, Özlem (2020) Therapeutic nanoparticles and their targeted delivery applications. Molecules, 25 (9). ISSN 1420-3049

Yıldırım, Mahir Umman and Çatay, Bülent (2009) An ant colony algorithm for time-dependent vehicle routing problem with time windows. In: Annual International Conference of the German Operations Research Society, 2008, Augsburg, Germany

Yılmaz, Hazal (2014) Modifications on protein termini of bacillus thermocatenulatus lipase and their impacts on activity and stability. [Thesis]

Yılmaz, Melike Sevim and Yarar Kaplan, Begüm and Alkan Gürsel, Selmiye and Metin, Önder (2019) Binary CuPt alloy nanoparticles assembled on reduced graphene oxide-carbon black hybrid as efficient and cost-effective electrocatalyst for PEMFC. International Journal of Hydrogen Energy, 44 (27). pp. 14184-14192. ISSN 0360-3199 (Print) 1879-3487 (Online)

Yılmaz, Melike Sevim and Yarar Kaplan, Begüm and Metin, Önder and Alkan Gürsel, Selmiye (2018) A facile synthesis and assembly of ultrasmall Pt nanoparticles on reduced graphene oxide‑carbon black hybrid for enhanced performance in PEMFC. Materials & Design, 151 . pp. 29-36. ISSN 0261-3069 (Print) 0264-1275 (Online)

Yılmaz, Pınar (2004) Strategic level three-stage production distribution planning with capacity expansion. [Thesis]

Yiğitalp, Ayça and Taşdemir, Adnan and Alkan Gürsel, Selmiye and Yürüm, Alp (2020) Nafion-coated LiNi0.80Co0.15Al0.05O2(NCA) cathode preparation and its influence on the Li-ion battery cycle performance. Energy Storage . ISSN 2578-4862 Published Online First http://dx.doi.org/10.1002/est2.154

Yüksel, Kamer Ali and Erçil, Aytül and Bozkurt, Batuhan (2012) Digital sound synthesis via parallel evolutionary optimization (Paralel evrimsel eniyileme ile sayısal ses sentezleme). In: IEEE 20th Signal Processing and Communications Applications Conference (SIU 2012), Fethiye, Muğla

Yüksel, Kamer Ali and Erçil, Aytül and Cansoy, Murat Çelik and Balcısoy, Selim (2011) Augmenting conversations through context-aware multimedia retrieval based on speech recognition. In: 5th Workshop on Human-Computer Interaction and Information Retrieval (HCIR 2011), Mountain view, CA

Yüksel, Kamer Ali and Erçil, Aytül and Yücebilgin, Alp and Balcısoy, Selim (2011) Using image morphing for memory-efficient impostor rendering on GPU. In: 2011 International Conference on Cyberworlds (CW), Calgary, AB, Canada

Yürüm, Yuda and Dumanlı, Ahu Gümrah (2006) Production of carbon nanofibers using sodium chloride supported metal catalysts. In: Production of carbon nanfibers using sodium chloride supported metal catalysts, San Fransisco, USA

Z

Zuvin, Merve and Koçak, Muhammed and Ünal, Özlem and Akkoç, Yunus and Kutlu, Özlem and Yağcı Acar, Havva and Gözüaçık, Devrim and Koşar, Ali (2019) Nanoparticle based induction heating at low magnitudes of magnetic field strengths for breast cancer therapy. Journal of Magnetism and Magnetic Materials, 483 . pp. 169-177. ISSN 0304-8853 (Print) 1873-4766 (Online)

Zuvin, Merve and Kuruoğlu, Efe and Kaya, Veysel Oğulcan and Ünal, Özlem and Kutlu, Özlem and Acar, Funda Yağcı and Gözüaçık, Devrim and Koşar, Ali (2019) Magnetofection of green fluorescent protein encoding DNA-bearing polyethyleneimine-coated superparamagnetic iron oxide nanoparticles to human breast cancer cells. ACS Omega, 4 (7). pp. 12366-12374. ISSN 2470-1343

Ç

Çakmak, Umut Can and Apaydın, Serkan Mehmet and Çatay, Bülent (2018) Traffic speed prediction with neural networks. In: Annual International Conference of the German Operations Research Society (GOR), Berlin, Germany

Çallı, Berk and Erbatur, Kemalettin and Ünel, Mustafa (2009) Visually aided force control with fuzzy parameter tuning. In: ICONS 2009 - The 2nd International Conference on Intelligent Systems and Control,

Çapar, İsmail (2002) A Supply chain performance measurement system: A Case study in automotive industry. [Thesis]

Çatay, Bülent (2008) An ant colony algorithm for the mixed vehicle routing problem with backhauls. In: 3rd World Conference on Production and Operations Management, Tokyo, Japan

Çatay, Bülent and Erengüç, Ş. Selçuk and Vakharia, Asoo J. (2005) Capacity allocation with machine duplication in semiconductor manufacturing. Naval research logistics, 52 (7). pp. 659-667. ISSN 0894-069X

Çelebi, Beşir and Çevik, Gülnihal and Mehmet, Berkem and Shoukry Mohammed Khalil, Islam and Şabanoviç, Asif (2011) Motion control and vibration suppression of flexible lumped systems via sensorless LQR control. Automatika, 51 (4). pp. 313-324. ISSN 0005-1144

Çelik, Sercan and Simpson, Adam John (2013) English language teacher education. In: Baran, Evrim, (ed.) The Many Faces of TPACK: Perspectives and Approaches. Wikibooks / Wikimedia, The Wikimedia Foundation.

Çetindamar, Dilek (2006) Teknoloji yönetiminde ortaklıklar. Stratejik İşbirlikleri: Teknolojiyi İşbirliği Ağları İçinde Yönetmek. [s.l.], [s.n.].

Çetindamar, Dilek and Başağa, Hüveyda (2006) Türkiye'de biyoteknoloji işbirlikleri. Rekabet Stratejileri. TÜSİAD, İstanbul.

Çetindamar, Dilek and Can, Özge and Pala, Okan (2006) Technology management activities and tools: the practice in Turkey. In: PICMET’06 Conference, Istanbul, Turkey

Çetindamar, Dilek and Ulusoy, Gündüz (2006) Innovation performance and partnerships. In: 2nd European Management of Technology Conference, Birmingham, UK

Çetindamar, Dilek and Ünsal, Hacer (2006) Technology management through partnerships. In: 13th IFTM Conference, Istanbul, Turkey

Çetiner, Selim (2015) Biyoteknoloji stratejisi mi dediniz? Tarla Sera Dergisi, 5 (60). pp. 22-23. ISSN 1309-9116

Çetinsoy, Ertuğrul (2006) Analysis of hydrodynamic lift for gas turbine oil brush seals /. [Thesis]

Çetinsoy, Ertuğrul and Öner, Kaan Taha and Kandemir, İlyas and Akşit, Mahmut Faruk and Ünel, Mustafa and Gülez, Kayhan (2008) Yeni bir insansız hava aracının (SUAVi) mekanik ve aerodinamik tasarımı. In: Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul, Türkiye

Çıkım, Taha Abdullah and Gözüaçık, Devrim and Koşar, Ali (2014) Power reclamation efficiency of a miniature energy-harvesting device using external fluid flows. lnternational Journal of Energy Research, 38 (10). pp. 1318-1330. ISSN 0363-907X (Print) 1099-114X (Online)

Çıkım, Taha Abdullah and Koşar, Ali and Gözüaçık, Devrim and Tatar, Oğuz (2012) Power reclamation efficiency of a miniature energy harvesting device using internal fluid flows. In: ASME International Mechanical Engineering Congress and Exposition, Houston, Texas

Çiçek, İhsan and Bozkurt, Ayhan and Karaman, Mustafa (2005) Design of a front-end integrated circuit for 3D acoustic imaging using 2D CMUT arrays. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 52 (12). pp. 2235-2241. ISSN 0885-3010

Çilingir, Halime Didem and Alkan Gürsel, Selmiye (2011) Preparation and characterization of novel composites based on a radiation grafted membrane for fuel cells. Fuel Cells, 11 (3). pp. 361-371. ISSN 1615-6846

Çimren, Emrah (2004) An Intelligent decision support system for machine tool selection. [Thesis]

Çimren, Emrah and Çatay, Bülent and Budak, Erhan (2004) Development of a machine tool selection system using analytic hierarchy process. In: 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (CIRP ICME '04), Sorrento, Italy

Çinicioğlu, Esma Nur and Ertek, Gürdal and Demirer, Deniz and Yörük, Ersin Hasan (2011) A framework for automated association mining over multiple databases. In: International Symposium on Innovations in Intelligent Systems and Applications (INISTA 2011), Istanbul, Turkey

Çoban, Elvin and Muter, İbrahim and Taş, Duygu and Birbil, Ş. İlker and Bülbül, Kerem and Şahin, Güvenç and Topçu, Y. İlker and Tüzün, Dilek and Yenigün, Hüsnü (2009) Column generation approaches to a robust airline crew pairing model for managing extra flights. In: Operations Research 2008: OR and Global Business, Augsburg, Germany

Çorapcıoğlu, Gülcan and Gülgün, Mehmet Ali and Kisslinger, Kim and Sturm, Saso and Jha, Shikhar K. and Raj, Rishi (2016) Microstructure and microchemistry of flash sintered K0.5Na0.5NbO3. Journal of the Ceramic Society of Japan, 124 (4). pp. 321-328. ISSN 1882-0743 (Print) 1882-0743 (Online)

Ö

Övütmen, Tamer (2007) The multinomial selection problem. [Thesis]

Özaydın, Ekim (2003) Capacitated vehicle routing problem with time windows. [Thesis]

Özbey, Arzu and Karimzadehkhouei, Mehrdad and Alijani Alijanvand, Hossein and Koşar, Ali (2018) Microparticle inertial focusing in an asymmetric curved microchannel. (Accepted)

Özbey, Arzu and Karimzadehkhouei, Mehrdad and Bayrak, Özgecan and Koşar, Ali (2018) Inertial focusing of microparticles in curvilinear microchannels with different curvature angles. Microfluidics and Nanofluidics, 22 (6). ISSN 1613-4982 (Print) 1613-4990 (Online)

Özbey, Arzu and Karimzadehkhouei, Mehrdad and Kocatürk, Nur Mehpare and Erbil Bilir, Seçil and Kutlu, Özlem and Gözüaçık, Devrim and Koşar, Ali (2019) Inertial focusing of cancer cell lines in curvilinear microchannels. Micro and Nano Engineering, 2 . pp. 53-63. ISSN 2590-0072

Özbey, Arzu and Karimzadehkhouei, Mehrdad and Kurtoğlu, Evrim and Koşar, Ali (2013) Simulation of magnetic actuation of ferrofluids in microtubes. In: 11th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2013), Sapporo, Japan

Özbey, Arzu and Karimzadehkhouei, Mehrdad and Sefiane, Khellil and Koşar, Ali and Christy, John R. E. (2019) On bubble dynamics in subcooled nucleate boiling on a platinum wire. International Journal of Thermal Sciences, 137 . pp. 1-12. ISSN 1290-0729 (Print) 1778-4166 (Online)

Özbey, Arzu and Karimzadehkhouei, Mehrdad and Yalçın, Sinan Eren and Gözüaçık, Devrim and Koşar, Ali (2015) Modeling of ferrofluid magnetic actuation with dynamic magnetic fields in small channels. Microfluidics and Nanofluidics, 18 (3). pp. 447-460. ISSN 1613-4982 (Print) 1613-4990 (Online)

Özcan, Meriç (2005) Heterodyne source modules for microwave photonic applications. In: Photonics West Conference, San Jose, CA, USA

Özcan, Meriç (2004) Transient CFD simulations and response of a constant-temperature hot-wire anemometer. In: 10th Brazilian Congress of Thermal Sciences and Engineering, Rio de Janerio, Brazil

Özdemir, Hacı Murat (2003) Hierarchical modeling and analysis of container terminal operations. [Thesis]

Özdemir, Mehmed Rafet and Sadaghiani, Abdolali Khalili and Motezakker, Ahmad Reza and Parapari, Sorour Semsari and Park, Hyun Sun and Acar, Havva Yağcı and Koşar, Ali (2018) Experimental studies on ferrofluid pool boiling in the presence of external magnetic force. Applied Thermal Engineering, 139 . pp. 598-608. ISSN 1359-4311 (Print) 1873-5606 (Online)

Özden, Elif and Menceloğlu, Yusuf Z. and Papila, Melih (2010) Engineering chemistry of electrospun nanofibers and interfaces in nanocomposites for superior mechanical properties. ACS Applied Materials & Interfaces, 2 (7). pp. 1788-1793. ISSN 1944-8244 (Print) 1944-8252 (Online)

Özgüz, Volkan Hüsnü (2013) Ultra low energy vertically integrated circuits. Project Report. Sabancı Üniversitesi.

Özgüz, Volkan Hüsnü and Mandal, Hasan (2013) İleri teknolojilerde üniversite sanayi işbirliği ve kurumsal Ar-Ge merkezlerinin yönetişimi. In: 3. Sanayi Şurası, Ankara, Congresium

Özler, Saime Burçe and Küçükgül, Can and Koç, Bahattin (2015) Bioprinting with live cells. In: Türksen, Kürşad, (ed.) Bioprinting in Regenerative Medicine. Stem Cell Biology and Regenerative Medicine. Springer, Switzerland, pp. 67-88. ISBN 978-3-319-21385-9 (Print) 978-3-319-21386-6 (Online)

Öztürk, Erdem and Budak, Erhan (2005) Modeling of 5-axis forces. In: Proceedings of the 8th International Workshop on Modeling of Machining Operations, Chemnitz, Germany

Öztürk, Övgü and Akgül, Ceyhun Burak and Erçil, Aytül and Şahiner, Melike and Şahiner, Türker (2011) Automatic analysis of hands clapping in severe Alzheimer patient via computer vision techniques. Alzheimer's and Dementia, 7 (4). ISSN 1552-5260 (Print) 1552-5279 (Online)

Öztürk, Özkan (2003) Modeling of broaching for optimization purposes. [Thesis]

Ü

Ünal, Hayriye and Kolkar Mohammed, Javed Hussain Niazi (2013) Carbon nanotube decorated magnetic microspheres as an affinity matrix for biomolecules. Journal of Materials Chemistry B, 1 (14). pp. 1894-1902. ISSN 2050-750X

Ünel, Mustafa and Soldea, Octavian and Özgür, Erol and Bassa, Alp (2010) 3D object recognition using invariants of 2D projection curves. Pattern Analysis and Applications, 13 (4). pp. 451-468. ISSN 1433-7541

İ

İnal, Arzu Gülay (2003) A Model for duopoly competition in the durable household goods market. [Thesis]

İnan, Ali and Nergiz, Mehmet Ercan and Saygın, Yücel (2017) Öğrenci verilerinin korunması: Fatih projesi ışığında teknik değerlendirme. Bilişim Teknolojileri Dergisi, 10 (1). pp. 67-77. ISSN 1307-9697

Ş

Şahin, Osman and Elitaş, Meltem and Yapıcı, Murat Kaya (2020) Simulation of dielectrophoresis based separation of red blood cells (RBC) from bacteria cells. In: 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Cracow, Poland

Şeşen, Muhsincan and Akkartal, Cem Baha and Khudhayer, Wisam and Karabacak, Tansel and Koşar, Ali (2010) A compact nanostructure integrated pool boiler for microscale cooling applications. In: ASME International Mechanical Engineering Congress and Exposition (IMECE 2009), Lake Buena Vista, Florida

Şeşen, Muhsincan and Bahçeci, Beste and Koşar, Ali and Ulun, Soner and Su, Çağlar Hüseyin and Acar, Havva Funda Yağcı (2011) Magnetic actuation of nanofluids with ferromagnetic particles. In: 8th International Conference on Nanochannels, Microchannels and Minichannels - 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Microchannels and Minichannels (FEDSM2010-ICNMM2010), Montreal, Canada

Şeşen, Muhsincan and Koşar, Ali and Demir, Ebru and Kurtoğlu, Evrim and Kaplan, Nazlı and Erk, Hadi Çağdaş and Khudhayer, Wisam and Karabacak, Tansel (2012) Submerged jet impingement cooling of a nanostructured plate. In: ASME International Mechanical Engineering Congress and Exposition (IMECE), Vancouver, Canada

Şeşen, Muhsincan and Tekşen, Yiğit and Şahin, Berna and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2013) Boiling heat transfer enhancement of magnetically actuated nanofluids. Applied Physics Letters, 102 (16). ISSN 0003-6951 (Print) 1077-3118 (Online)

Şeşen, Muhsincan and Tekşen, Yiğit and Şendur, Kürşat and Mengüç, Pınar M. and Öztürk, Hande and Acar, Funda Yağcı and Koşar, Ali (2012) Heat transfer enhancement with actuation of magnetic nanoparticles suspended in a base fluid. Journal of Applied Physics, 112 (6). ISSN 0021-8979

Şişman, Yağmur and Sadaghiani, Abdolali Khalili and Khedir, Ramazan and Karabacak, Tansel and Koşar, Ali (2016) Nucleate boiling heat transfer enhancement using nanostructured al-alloy plates. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis, Singapore

This list was generated on Sat Sep 24 17:12:29 2022 +03.