Items where Division is "Materials Science & Eng." and Year is 2018

Group by: Creators | Item Type | No Grouping
Number of items: 89.

Article

Abdolhosseinzadeh, Sina and Sadighikia, Sina and Alkan Gürsel, Selmiye (2018) Scalable synthesis of sub-nanosized platinum-reduced graphene oxide composite by an ultraprecise photocatalytic method. ACS Sustainable Chemistry and Engineering, 6 (3). pp. 3773-3782. ISSN 2168-0485

Adatoz, E. Beruhil and Hendessi, Saman and Ow-Yang, Cleva W. and Demirel, A. Levent (2018) Restructuring of poly(2-ethyl-2-oxazoline)/tannic acid multilayers into fibers. Soft Matter, 14 (19). pp. 3849-3857. ISSN 1744-683X (Print) 1744-6848 (Online)

Akdoğan, Ozan (2018) Synthesis of hard magnetic Mn3Ga micro-islands by e-beam evaporation. AIP Advances, 8 (5). ISSN 2158-3226

Bagherzadeh, Amin and Budak, Erhan (2018) Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach. Tribology International, 119 . pp. 510-520. ISSN 0301-679X (Print) 1879-2464 (Online)

Bahariqushchi, Rahim and Rosario, Raciti and Kasapoğlu, Ahmet Emre and Gür, Emre and Sezen, Meltem and Kalay, Eren and Mirabella, Salvatore and Aydınlı, Atilla (2018) Stress evolution of Ge nanocrystals in dielectric matrices. Nanotechnology, 29 (18). ISSN 0957-4484 (Print) 1361-6528 (Online)

Bahmani Jalali, Houman and Aria, Mohammad Mohammadi and Dikbaş, Uğur Meriç and Sadeghi, Sadra and Kumar, Baskaran Ganesh and Şahin, Mehmet and Kavaklı, İbrahim Halil and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) Effective neural photostimulation using indium-based type-II quantum dots. Acs Nano, 12 (8). pp. 8104-8114. ISSN 1936-0851 (Print) 1936-086X (Online)

Baysal, Mustafa and Bilge, Kaan and Yıldızhan, Melike Mercan and Yorulmaz, Yelda and Öncel, Çınar and Papila, Melih and Yürüm, Yuda (2018) Catalytic synthesis of boron nitride nanotubes at low temperatures. Nanoscale, 10 (10). pp. 4658-4662. ISSN 2040-3364 (Print) 2040-3372 (Online)

Baysal, Mustafa and Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih and Yürüm, Yuda (2018) Preparation of high surface area activated carbon from waste-biomass of sunflower piths: Kinetics and equilibrium studies on the dye removal. Journal of Environmental Chemical Engineering, 6 (2). pp. 1702-1713. ISSN 2213-3437 (Print) 2213-2929 (Online)

Bilen, Bukem and Ateş Alkan, Fatma and Barutcu, Ümit Bora and Sezen, Meltem and Ünlü, Mehmet Burçin and Aghahev, Kamran (2018) Examination of metal mobilization from a gunshot by scanning acoustic microscopy, scanning electron microscopy, energy-dispersive X-Ray spectroscopy, and inductively coupled plasma optical emission spectroscopy: a case report. Journal of Medical Case Reports, 12 (1). ISSN 1752-1947

Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) Modeling 3D melt electrospinning writing by response surface methodology. Materials & Design, 148 . pp. 87-95. ISSN 0264-1275 (Print) 1873-4197 (Online)

Erdem, Öğüt and Yanık, Cenk and Kaya, İsmet İnönü and Ow-Yang, Cleva W. and Şendur, Kürşat (2018) Focusing short-wavelength surface plasmons by a plasmonic mirror. Optics Letters, 43 (9). pp. 2208-2211. ISSN 0146-9592 (Print) 1539-4794 (Online)

Ertaş Uslu, Merve and Mısırlıoğlu, Burç and Şendur, Kürşat (2018) Selective IR response of highly textured phase change VO2 nanostructures obtained via oxidation of electron beam deposited metallic V films. Optical Materials Express, 8 (8). pp. 2035-2049. ISSN 2159-3930

Ghorbani, Morteza and Chen, Hongjian and Villanueva, Luis Guillermo and Grishenkov, Dmitry and Koşar, Ali (2018) Intensifying cavitating flows in microfluidic devices with poly(vinyl alcohol) (PVA) microbubbles. Physics of Fluids, 30 (10). ISSN 1070-6631 (Print) 1089-7666 (Online)

Güçlü, Serkan and Sharabati, Jalal-Al-Din and Saffarimiandoab, Farzin and Ağtaş, Meltem and İmer, Derya Y. and Paşaoğlu, Mehmet E. and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) Investigation of pilot scale manufacturing of polysulfone (PSf) membranes by wet phase inversion method. Desalination and Water Treatment, 131 . pp. 66-74. ISSN 1944-3994 (Print) 1944-3986 (Online)

Gül, Burçin and Kılıç, Deniz and Bozkurt, Ayhan and Arıbal, Mustafa Erkin and Akbulut, Özge (2018) Silicone-based composite materials simulate breast tissue to be used as ultrasonography training phantoms. Ultrasonics, 88 . pp. 9-15. ISSN 0041-624X (Print) 1874-9968 (Online)

Güler, Enver and Sadeghi, Sahl and Alkan Gürsel, Selmiye (2018) Characterization and fuel cell performance of divinylbenzene crosslinked phosphoric acid doped membranes based on 4-vinylpyridine grafting onto poly(ethylene-co-tetrafluoroethylene) films. International Journal of Hydrogen Energy, 43 (16). pp. 8088-8099. ISSN 0360-3199 (Print) 1879-3487 (Online)

Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying. ACS Omega, 3 (6). pp. 6400-6410. ISSN 2470-1343

Hodaei, Amin and Akhlaghi Baghoojari, Omid and Khani, Navid and Aytaş, Tunahan and Sezer, Dilek and Tatlı, Buse and Menceloğlu, Yusuf Z. and Koç, Bahattin and Akbulut, Özge (2018) Single additive enables 3D printing of highly loaded iron oxide suspensions. ACS Applied Materials & Interfaces, 10 (11). pp. 9873-9881. ISSN 1944-8244 (Print) 1944-8252 (Online)

Jahangiri, Sassan and Aravi, İpek and Işıkel Şanlı, Lale and Menceloğlu, Yusuf Z. and Özden Yenigün, Elif (2018) Fabrication and optimization of proton conductive polybenzimidazole electrospun nanofiber membranes. Polymers for Advanced Technologies, 29 (1). pp. 594-602. ISSN 1042-7147 (Print) 1099-1581 (Online)

Karahan, Özlem and Biçer, Emre and Taşdemir, Adnan and Yürüm, Alp and Alkan Gürsel, Selmiye (2018) Development of efficient copper-based MOF-derived catalysts for the reduction of aromatic nitro compounds. European Journal of Inorganic Chemistry, 9 . pp. 1073-1079. ISSN 1434-1948 (Print) 1099-0682 (Online)

Karimzadehkhouei, Mehrdad and Shojaeian, Mostafa and Khalili Sadaghiani, Abdolali and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2018) Entropy generation analysis of laminar flows of water-based nanofluids in horizontal minitubes under constant heat flux conditions. Entropy, 20 (4). ISSN 1099-4300

Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology. Ocean Engineering, 147 . pp. 256-267. ISSN 0029-8018

Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Kasap, Sibel and Kaya, İsmet İnönü and Koşar, Ali (2018) Foamlike 3D graphene coatings for cooling systems involving phase change. ACS Omega, 3 (3). pp. 2804-2811. ISSN 2470-1343

Koohestani, Babak and Khodadadi Darban, Ahmad and Darezereshkia, Esmaeel and Mokhtari, Pozhhan and Yılmaz, Erol and Yılmaz, Elif (2018) The influence of sodium and sulfate ions on total solidification and encapsulation potential of iron-rich acid mine drainage in silica gel. Journal of Environmental Chemical Engineering, 6 (2). pp. 3520-3527. ISSN 2213-3437 (Print) 2213-2929 (Online)

Koohestani, Babak and Khodadadi Darban, Ahmad and Mokhtari, Pozhhan (2018) A comparison between the influence of superplasticizer and organosilanes on different properties of cemented paste backfill. Construction and Building Materials, 173 . pp. 180-188. ISSN 0950-0618 (Print) 1879-0526 (Online)

Koohestani, Babak and Khodadadi Darban, Ahmad and Yılmaz, Erol and Mokhtari, Pozhhan and Ganetri, Ikram (2018) Influence of amine and vinyl functional groups of silanes on total performance of thermoplastic-based composites. Construction and Building Materials, 172 . pp. 98-105. ISSN 0950-0618 (Print) 1879-0526 (Online)

Kumar, Baskaran Ganesh and Sadeghi, Sadra and Melikov, Rustamzhon and Mohammadi Aria, Mohammad and Bahmani Jalali, Houman and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) Structural control of InP/ZnS core/shell quantum dots enables high-quality white LEDs. Nanotechnology, 29 (34). ISSN 0957-4484 (Print) 1361-6528 (Online)

Levanyuk, Arkadi P. and Minyukov, Sergey A. and Mısırlıoğlu, Burç (2018) Loss of elastic stability and formation of inhomogeneous states at phase transitions in thin films on substrates. Ferroelectrics, 533 (1). pp. 1-9. ISSN 0015-0193 (Print) 1563-5112 (Online)

Mehraeen, Shayan and Taşdemir, Adnan and Alkan Gürsel, Selmiye and Yürüm, Alp (2018) Homogeneous growth of TiO2-based nanotubes on nitrogen-doped reduced graphene oxide and its enhanced performance as a Li-ion battery anode. Nanotechnology, 29 (25). ISSN 0957-4484 (Print) 1361-6528 (Online)

Mohammad Moradi, Omid and Şen, Canhan and Boni, A. G. and Pintilie, L. and Mısırlıoğlu, Burç (2018) Strong composition dependence of resistive switching in Ba1-xSrxTiO3 thin films on semiconducting substrates and its thermodynamic analysis. Acta Materialia, 148 . pp. 419-431. ISSN 1359-6454 (Print) 1873-2453 (Online)

Oğuz, Oğuzhan and Şimşek, Eren and Kosak Soz, Çağla and Heinz, Özge and Yilgor, Emel and Yilgor, İskender and Menceloğlu, Yusuf Z. (2018) Effect of filler content on the structure-property behavior of poly(ethylene oxide) based polyurethaneurea-silica nanocomposites. Polymer Engineering and Science, 58 (7). pp. 1097-1107. ISSN 0032-3888 (Print) 1548-2634 (Online)

Ormancı-Acar, Türkan and Çelebi, Ferda and Keskin, Başak and Mutlu-Salmanlı, Öykü and Agtas, Meltem and Turken, Türker and Tufani, Ali and İmer, Derya Y. and Özaydın İnce, Gözde and Uçar Demir, Tuğba and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection. Desalination, 429 . pp. 20-32. ISSN 0011-9164 (Print) 1873-4464 (Online)

Oruç, Betül and Çelik, Süleyman and Hayat Soytaş, Serap and Ünal, Hayriye (2018) DNA directed self-assembly of single walled carbon nanotubes into three-way junction nanostructures. ACS Omega, 3 (4). pp. 4157-4162. ISSN 2470-1343

Özbey, Arzu and Karimzadehkhouei, Mehrdad and Bayrak, Özgecan and Koşar, Ali (2018) Inertial focusing of microparticles in curvilinear microchannels with different curvature angles. Microfluidics and Nanofluidics, 22 (6). ISSN 1613-4982 (Print) 1613-4990 (Online)

Özdemir, Mehmed Rafet and Sadaghiani, Abdolali Khalili and Motezakker, Ahmad Reza and Parapari, Sorour Semsari and Park, Hyun Sun and Acar, Havva Yağcı and Koşar, Ali (2018) Experimental studies on ferrofluid pool boiling in the presence of external magnetic force. Applied Thermal Engineering, 139 . pp. 598-608. ISSN 1359-4311 (Print) 1873-5606 (Online)

Papila, Melih (2018) Design of and with thin-ply non-crimp fabric as building blocks for composites. Science and Engineering of Composite Materials, 25 (3). pp. 501-516. ISSN 0792-1233 (Print) 2191-0359 (Online)

Penkler, David L. and Atılgan, Canan and Taştan Bishop, Özlem (2018) Allosteric modulation of human Hsp90α conformational dynamics. Journal of Chemical Information and Modeling, 58 (2). pp. 383-404. ISSN 1549-9596 (Print) 1549-960X (Online)

Rahmat, Amin and Yıldız, Mehmet (2018) A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence. International Journal of Multiphase Flow, 105 . pp. 32-44. ISSN 0301-9322 (Print) 1879-3533 (Online)

Ross, Caroline Jane and Atılgan, Ali Rana and Taştan Bishop, Özlem and Atılgan, Canan (2018) Unraveling the motions behind Enterovirus 71 uncoating. Biophysical Journal, 114 (4). pp. 822-838. ISSN 0006-3495 (Print) 1542-0086 (Online)

Sadeghi, Sadra and Bahmani Jalali, Houman and Melikov, Rustamzhon and Kumar, Baskaran Ganesh and Mohammadi Aria, Mohammad and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2018) Stokes-shift-engineered indium phosphide quantum dots for efficient luminescent solar concentrators. ACS Applied Materials & Interfaces, 10 (15). pp. 12975-12982. ISSN 1944-8244 (Print) 1944-8252 (Online)

Sadeghi, Sahl and Işıkel Şanlı, Lale and Güler, Enver and Alkan Gürsel, Selmiye (2018) Enhancing proton conductivity via sub-micron structures in proton conducting membranes originating from sulfonated PVDF powder by radiation-induced grafting. Solid State Ionics, 314 . pp. 66-73. ISSN 0167-2738 (Print) 1872-7689 (Online)

Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors. Thin-Walled Structures, 130 . pp. 458-466. ISSN 0263-8231 (Print) 1879-3223 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification. Composites Part A: Applied Science and Manufacturing, 106 . pp. 1-10. ISSN 1359-835X (Print) 1878-5840 (Online)

Shakoorioskooie, Mahdieh and Menceloğlu, Yusuf Z. and Ünal, Serkan and Hayat Soytaş, Serap (2018) Rapid microwave-assisted synthesis of platinum nanoparticles immobilized in electrospun carbon nanofibers for electrochemical catalysis. ACS Applied Nano Materials, 1 (11). pp. 6236-6246. ISSN 2574-0970

Shawuti, Shalima and Can, Musa Mutlu and Gülgün, Mehmet Ali and Kaneko, Satoru and Endo, Tamio (2018) Influence of grain boundary interface on ionic conduction of (Zn1-x,Co-x)O. Composites Part B: Engineering, 147 . pp. 252-258. ISSN 1359-8368 (Print) 1879-1069 (Online)

Shojaeian, Mostafa and Nedaei, Masoumeh and Yıldız, Mehmet and Koşar, Ali (2018) Numerical heat transfer and entropy analysis on liquid slip flows through parallel-plate microchannels. Journal of Thermal Science and Engineering Applications, 10 (2). ISSN 1948-5085 (Print) 1948-5093 (Online)

Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2018) Efficient strategies for reliability-based design optimization of variable stiffness composite structures. Structural and Multidisciplinary Optimization, 57 (2). pp. 689-704. ISSN 1615-147X (Print) 1615-1488 (Online)

Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) Cost analysis of variable stiffness composite structures with application to a wind turbine blade. Composite Structures, 203 . pp. 681-695. ISSN 0263-8223 (Print) 1879-1085 (Online)

Şimşek, Eren and Oğuz, Oğuzhan and Bilge, Kaan and Çıtak, Mehmet Kerem and Çolak, Oğuzhan and Menceloğlu, Yusuf Z. (2018) Poly(propylene)/waste vulcanized ethylene- propylene-diene monomer (PP/WEPDM) blends prepared by high-shear thermo-kinetic mixer. Journal of Elastomers and Plastics, 50 (6). pp. 537-553. ISSN 0095-2443 (Print) 1530-8006 (Online)

Taheri, M. H. and Mohammadpourfard, Mousa and Khalili Sadaghiani, Abdolali and Koşar, Ali (2018) Wettability alterations and magnetic field effects on the nucleation of magnetic nanofluids: a molecular dynamics simulation. Journal of Molecular Liquids, 260 . pp. 209-220. ISSN 0167-7322 (Print) 1873-3166 (Online)

Ünal, Özlem and Khodadust, Rouhollah and Durmuşoğlu, Emek G. and Erdem, Emre and Yağcı, Mustafa Barış and Ow-Yang, Cleva W. and Yurtsever, Ersin and Yağcı Acar, Havva (2018) Discovery of an exceptionally strong luminescence of polyethyleneimine-superparamagnetic iron oxide nanoparticles. Macromolecular Chemistry and Physics, 219 (9). ISSN 1022-1352 (Print) 1521-3935 (Online)

Yarar Kaplan, Begüm and Haghmoradi, Navid and Biçer, Emre and Merino, Cesar and Alkan Gürsel, Selmiye (2018) High performance electrocatalysts supported on graphene based hybrids for polymer electrolyte membrane fuel cells. International Journal of Hydrogen Energy, 43 (52). pp. 23221-23230. ISSN 0360-3199 (Print) 1879-3487 (Online)

Yılmaz, Çağatay and Akalın, Çağdaş and Günal, İbrahim and Çelik, Hakan and Büyük, Murat and Suleman, Afzal and Yıldız, Mehmet (2018) A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading. Composite Structures, 186 . pp. 347-354. ISSN 0263-8223 (Print) 1879-1085 (Online)

Yılmaz, Melike Sevim and Yarar, Begüm and Metin, Önder and Alkan Gürsel, Selmiye (2018) A facile synthesis and assembly of ultrasmall Pt nanoparticles on reduced graphene oxide‑carbon black hybrid for enhanced performance in PEMFC. Materials & Design, 151 . pp. 29-36. ISSN 0261-3069 (Print) 0264-1275 (Online)

Yüce, Meral and Kurt, Hasan and Hussain, Babar and Ow-Yang, Cleva W. and Budak, Hikmet (2018) Exploiting stokes and anti-stokes type emission profiles of aptamer-functionalized luminescent nanoprobes for multiplex sensing applications. Chemistry Select, 3 (21). pp. 5814-5823. ISSN 2365-6549

Zitani, Mahboubeh Kiani and Ebadzadeh, Touradj and Banijamali, Sara and Riahifar, Reza and Rüssel, Christian and Khabbazabkenar, Sirous and Ren, Haishen (2018) High quality factor microwave dielectric diopside glass-ceramics for the low temperature co-fired ceramic (LTCC) applications. Journal of Non-Crystalline Solids, 487 . pp. 65-71. ISSN 0022-3093 (Print) 1873-4812 (Online)

Papers in Conference Proceedings

Aktaş, Büşra and Ow-Yang, Cleva W. and Sezen, Meltem and Büyükaksoy, Aligül (2018) La0.8Sr0.2MnO3 – Bi1.44Y0.56O3 thin film cathodes for solid oxide fuel cells. In: IV. International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress (SERES'18), Eskisehir, Turkey

Çamiç, Büşra Tuğba and Oytun, Faruk and Sezen, Meltem and Aslan, Muhammed Hasan and Başarır, Fevzihan (2018) Fabrication of graphene/silver nanowire based transparent conductive solar cell electrodes via LbL deposition. In: 19th International Metallurgy and Materials Congress (IMMC 2018), Istanbul, Turkey

Erdöl, Sevim and Ow-Yang, Cleva W. and Sezen, Meltem and Büyükaksoy, Aligül (2018) La0.6 Sr0.4 CoO3 thin film cathodes prepared by polymeric precursors for solid oxid fuel cells. In: IV. International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress (SERES'18), Eskisehir, Turkey

Ghorbani, Morteza and Villanueva, Guillermo and Koşar, Ali (2018) An optimization study on thermal energy harvesting from micro cavitating flows. In: 6th Micro and Nano Flows Conference 2018, Atlanta, USA

Kaya, Cengiz and Avcıoğlu, Suna and Kaya, Figen (2018) Low temperature synthesis and characterization of high purity nano boron carbide (B4C) structures. In: IV. International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress (SERES'18), Eskisehir, Turkey

Kefal, Adnan and Haşim, Ahmet Kazım and Yıldız, Mehmet (2018) Isogeometric analysis of moderately thick composite beams and plates based on refined zigzag theory. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Kefal, Adnan and Sohouli, A. and Öterkuş, E. and Yıldız, Mehmet and Suleman, A. (2018) Topology optimization of cracked structures using peridynamics. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Madenci, Erdoğan and Kefal, Adnan and Dördüncü, Mehmet and Barut, Atila and Yıldız, Mehmet (2018) Isogeometric analysis using peridynamics and XFEM. In: 59th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Kissimmee, USA

Taşdemir, Adnan and Biçer, Emre and Alkan Gürsel, Selmiye and Yürüm, Alp (2018) Cerium dioxide catalyst nanorods decorated three-dimensional nitrogen doped and reduced graphene oxide electrodes for Li-air batteries. In: 256th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nanoscience, Nanotechnology and Beyond, Boston, MA

Yılmaz, C. and Akalın, C. and Günal, I. and Çelik, H. and Büyük, M. and Suleman, A. and Yıldız, Mehmet (2018) Observation of damage accumulation under in-plane shear loading. In: Specialists' Meeting AVT-305 on Sensing Systems for Integrated Vehicle Health Management (IVHM) of Military Vehicles (NATO STO AVT-305), Athens, Greece

Yürüm, Alp and Goharibajestani, Zahra and Yürüm, Yuda (2018) Faceted TiO2/Fe2O3 nanoparticles with carbon-based supports for water treatment applications. In: 255th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nexus of Food, Energy, and Water, New Orleans, LA

Book Section / Chapter

Hayat Soytaş, Serap and Oğuz, Oğuzhan and Menceloğlu, Yusuf Z. (2018) Polymer nanocomposites with decorated metal oxides. In: Pielichowski, Krzysztof and Majka, Tomasz, (eds.) Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications. Elsevier, United States, pp. 287-323. ISBN 9780128140642 (Print) 9780128140659 (Online)

Oğuz, Oğuzhan and Seyyed Monfared Zanjani, Jamal and Hayat Soytaş, Serap and Menceloğlu, Yusuf Z. (2018) Specific interactions and self-organization in polymer: functionalized nanoparticle systems. In: Pielichowski, Krzysztof and Majka, Tomasz, (eds.) Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications. Elsevier, United States, pp. 85-117. ISBN 9780128140642 (Print) 9780128140659 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Self-healing thermosetting composites: concepts, chemistry and future advances. In: Delville, Marie-Helene and Taubert, Andreas, (eds.) Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials. Wiley, UK. ISBN 9783527342556 (Print) 9783527807130 (Online)

Thesis

Abbasi, Sanaz (2018) Purification, size separation and ionic fnctionalization of halloysite nanotubes. [Thesis]

Arıcı, Ece (2018) Platinum nanoparticles supported with graphene nanoplatelets and hybrid carbon materials designed as electrocatalysts for PEM fuel cells. [Thesis]

Baysal, Mustafa (2018) Low-Temperature catalytic synthesis of boron nitride nanotubes by alkalı metal ferrites. [Thesis]

Eskin, Murat Gökhan (2018) Polymer electrolyte membrane fuel cells operating under ultra-low stoichiometric anode flow conditions. [Thesis]

Güçlü, Utku (2018) Monitoring and identification of progressive damage in fiber reinforced composite structures using non-destructive testing. [Thesis]

Gül, Burçin (2018) Design and fabrication of silicone-based composite tissue-mimicking phantoms for medical training. [Thesis]

Haghighi Poudeh, Leila (2018) Design and manufacturing of dimensionally controlled graphene based hybrid structures by core-shell electrospinning for energy storage systems. [Thesis]

Hodaei, Amin (2018) A single additive for 3D printing of highly-concentrated iron oxide inks. [Thesis]

Khorsand Kheirabad, Atefeh (2018) Synthesis and characterization of self-crosslinking polyurethanes and their waterborne dispersions. [Thesis]

Mehraeen, Shayan (2018) Bending actuators based on ionic electroactive polymers. [Thesis]

Oruç, Betül (2018) Carbon nanotube based hybrid nanostructures as photothermal antimicrobial nanomaterials. [Thesis]

Özden, İpeknaz (2018) Decellularized extracellular matrix-agarose hybrid bioink development for 3D bioprinting applications. [Thesis]

Rajabalizadeh Mojarrad, Naeimeh (2018) Proton exchange membranes prepared by radiation grafting of n-vinyl imidazole/4-vinyl pyridine onto poly (ethylene-co-tetrafluoroethylene) for high-temperature PEM fuel cells. [Thesis]

Saeidi Harzand, Sahand (2018) Carbon dioxide capture by adsorption on a biomass based activated carbon. [Thesis]

Şen, Canhan (2018) Electric field control of interfacial spins in ferroelectric/ferromagnetic junctions. [Thesis]

Şenuysal, Hilal (2018) Automated nanomaterial integrated repair patch production and its implementation for carbon fiber-reinforced composites. [Thesis]

Tufani, Ali (2018) Vapor phase synthesis of smart membranes for macromolecule separation applications. [Thesis]

Yılmaz, Çağatay (2018) Monitoring micro-damage accumulation based on reduction in elastic properties using fiber bragg grating sensors, and acoustic emission and thermography methods in fiber reinforced polymeric composites. [Thesis]

Yorulmaz, Yelda (2018) Optimization of synthesis conditions of boron nitride nanotubes (BNNTS) and their effects on epoxy resin curing. [Thesis]

This list was generated on Sat Dec 21 14:05:59 2024 +03.