Items where Subject is "TA401-492 Materials of engineering and construction. Mechanics of materials"

Article

Abdollahzadeh, Mohammadamin and Kefal, Adnan and Yıldız, Mehmet (2020) A comparative and review study on shape and stress sensing of flat/curved shell geometries using C0-continuous family of iFEM elements. Sensors, 20 (14). ISSN 1424-8220

Akhlaghi Baghoojari, Omid and Aytaş, Tunahan and Tatlı, Buse and Sezer, Dilek and Hodaei, Amin and Favier, Aurelie and Scrivener, Karen and Menceloğlu, Yusuf Z. and Akbulut, Özge (2017) Modified poly(carboxylate ether)-based superplasticizer for enhanced flowability of calcined clay-limestone-gypsum blended Portland cement. Cement and Concrete Research, 101 . pp. 114-122. ISSN 0008-8846 (Print) 1873-3948 (Online)

Akhlaghi Baghoojari, Omid and Menceloğlu, Yusuf Z. and Akbulut, Özge (2017) Poly(carboxylate ether)-based superplasticizer achieves workability retention in calcium aluminate cement. Scientific Reports, 7 . ISSN 2045-2322

Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Tufani, Ali and Yıldız, Mehmet (2019) Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission. Composite Structures, 230 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Aliyeva, Nargiz and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2021) Recent developments on the overmolding process for the fabrication of thermoset and thermoplastic composites by the integration of nano/micron-scale reinforcements. Composites Part A: Applied Science and Manufacturing, 149 . ISSN 1359-835X (Print) 1878-5840 (Online)

Alkoy, Ebru Mensur and Papila, Melih (2010) Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics. Ceramics International, 36 (6). pp. 1921-1927. ISSN 0272-8842

Altay, A. and Carter, C. B. and Arslan, I. and Gülgün, Mehmet Ali (2009) Crystallization of CaAl4O7 and CaAl12O19 powders. Philosophical Magazine, 89 (7). pp. 605-621. ISSN 1478-6435 (Print) 1478-6443 (Online)

Atabak, Mehrdad and Ünverdi, Özhan and Özer, H. Özgür and Oral, Ahmet (2009) Sub-Angstrom oscillation amplitude non-contact atomic force microscopy for lateral force gradient measurement. Applied Surface Science, 256 (5). pp. 1299-1303. ISSN 0169-4332

Atwani, Osman and Barıştıran, Canan and Erden, Ayça and Sönmez, Gürsel (2008) A stable, low band gap electroactive polymer: poly(4,7-dithien-2-yl-2,1,3-benzothiadiazole). Synthetic Metals, 158 (3-4). pp. 83-89. ISSN 0379-6779

Avcı, Gökay and Akhlaghi Baghoojari, Omid and Üstbaş, Burçin and Özbay, Ceren and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) A PCE-based rheology modifier allows machining of solid cast green bodies of alumina. Ceramics International, 42 (3). pp. 3757-3761. ISSN 0272-8842 (Print) 1873-3956 (Online)

Berktaş, İlayda and Chaudhari, Ojas and Ghafar, Ali Nejad and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2021) Silanization of SiO2 decorated carbon nanosheets from rice husk ash and its effect on workability and hydration of cement grouts. Nanomaterials, 11 (3). ISSN 2079-4991

Berktaş, İlayda and Ghafar, Ali Nejad and Fontana, Patrick and Çaputcu, Ayten and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) Facile synthesis of graphene from waste tire/silica hybrid additives and optimization study for the fabrication of thermally enhanced cement grouts. Molecules, 25 (4). ISSN 1420-3049

Berktaş, İlayda and Ghafar, Ali Nejad and Fontana, Patrick and Çaputcu, Ayten and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) Synergistic effect of expanded graphite-silane functionalized silica as a hybrid additive in improving the thermal conductivity of cementitious grouts with controllable water uptake. Energies, 13 (14). ISSN 1996-1073

Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2012) Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers. Composites Science and Technology, 72 (14). pp. 1639-1645. ISSN 0266-3538

Büyük, Murat and Atahan, Ali Osman and Kurucuoğlu, Kenan (2018) Impact performance evaluation of a crash cushion design using finite element simulation and full-scale crash testing. Safety, 4 (4). ISSN 2313-576X

Can, Musa Mutlu and Jaffari, G. Hassnain and Aksoy, Seda and Shah, S. Ismat and Fırat, Tezer (2013) Synthesis and characterization of ZnGa2O4 particles prepared by solid state reaction. Journal of Alloys and Compounds, 549 . pp. 303-307. ISSN 0925-8388

Carlier, Aurelli and Akdeniz Skvortsov, Gözde and Hafezi, Forough and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin and Oosterwyck, Hans Van (2016) Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering. Biofabrication, 8 (2). ISSN 1758-5082 (Print) 1758-5090 (Online)

Cebeci, Fevzi Çakmak and Schmidt, Daniel J. and Hammond, Paula T. (2014) Multilayer transfer printing of electroactive thin film composites. ACS Applied Materials & Interfaces, 6 (22). pp. 20519-20523. ISSN 1944-8244 (Print) 1944-8252 (Online)

Coşkun, Mustafa and Can, Musa Mutlu and Coşkun, Özlem Duyar and Korkmaz, Mustafa and Fırat, Tezer (2012) Surface anisotropy change of CoFe2O4 nanoparticles depending on thickness of coated SiO2 shell. Journal of Nanoparticle Research, 14 (10). ISSN 1388-0764 (Print) 1572-896X (Online)

Demircan, Özgür (2014) Initial and final fracture behaviors of woven fabric composites. Science and Engineering of Composite Materials . ISSN 0792-1233 (Print) 2191-0359 (Online) Published Online First http://dx.doi.org/10.1515/secm-2014-0178

Demircan, Özgür and Ashibe, Shinsuke and Kosui, Tatsuya and Nakai, Asami (2014) Effect of various knitting techniques on mechanical properties of biaxial weft-knitted thermoplastic composites. Journal of Thermoplastic Composite Materials . ISSN 0892-7057 (Print) 1530-7980 (Online) Published Online First http://dx.doi.org/10.1177/0892705713519121

Demircan, Özgür and Ashibe, Shinsuke and Kosui, Tatsuya and Nakai, Asami (2014) Effect of various loop lengths on mechanical properties of biaxial weft-knitted thermoplastic composites. Journal of Thermoplastic Composite Materials . ISSN 0892-7057 (Print) 1530-7980 (Online) Published Online First http://dx.doi.org/10.1177/0892705714526918

Demircan, Özgür and Ashibe, Shinsuke and Kosui, Tatsuya and Nakai, Asami (2014) Modeling of tensile and bending properties of biaxial weft knitted composites. Science and Engineering of Composite Materials . pp. 1-11. ISSN 0792-1233 (Print) 2191-0359 (Online) Published Online First http://dx.doi.org/10.1515/secm-2013-0274

Demircan, Özgür and Ashibe, Shinsuke and Kosui, Tatsuya and Nakai, Asami (2014) Tensile and bending properties of biaxial weft-knitted and cross-ply thermoplastic composites. Journal of Thermoplastic Composite Materials . ISSN 0892-7057 (Print) 1530-7980 (Online) Published Online First http://dx.doi.org/10.1177/0892705714530751

Demircan, Özgür and Kosui, Tatsuya and Ashibe, Shinsuke and Nakai, Asami (2014) Effect of surface treatment and twisting on tensile and bending properties of aramid unidirectional composites. Composite Interfaces (SI), 21 (4). pp. 287-299. ISSN 0927-6440 (Print) 1568-5543 (Online)

Dongxing, Yang and Velamakanni, Aruna and Bozoklu, Gülay and Park, Sungjin and Stoller, Meryl and Piner, Richard D. and Stankovich, Sasha and Jung, Inhwa and Field, Daniel A. and Ventrice, Carl A., Jr. and Ruoff, Rodney S. (2009) Chemical analysis of graphene oxide films after heat and chemical treatments by X-ray photoelectron and Micro-Raman spectroscopy. Carbon, 47 (1). pp. 145-152. ISSN 0008-6223

Dursun, Sinan and Mensur-Alkoy, Ebru and Sabuncu, Abdulsamet and Berksoy-Yavuz, Ayşe and Gülgün, Mehmet Ali and Alkoy, Sedat (2017) Growth of NBT template particles through topochemical microcrystal conversion and their structural characterization. Journal of the American Ceramic Society, 100 (3). pp. 937-944. ISSN 0002-7820 (Print) 1551-2916 (Online)

Ercan, Batur and Taylor, Erik and Alpaslan, Ece and Webster, Thomas J. (2011) Diameter of titanium nanotubes influences anti-bacterial efficacy. Nanotechnology, 22 (29). ISSN 0957-4484

Ghobadi, Sajjad and Işıkel Şanlı, Lale and Bakhtiari, Rokhsareh and Alkan Gürsel, Selmiye (2017) Green composite papers via use of natural binders and graphene for PEM fuel cell electrodes. ACS Sustainable Chemistry and Engineering, 5 (9). pp. 8407-8415. ISSN 2168-0485

Glowacki, Eric Daniel and Leonat, Lucia and Voss, Gundula and Bodea, Marius-Aurel and Bozkurt, Zeynep and Ramil, Alberto Montaigne and Irimia-Vladu, Mihai and Bauer, Siegfried and Sarıçiftçi, Niyazi Serdar (2011) Ambipolar organic field effect transistors and inverters with the natural material Tyrian Purple. AIP Advances, 1 (4). ISSN 2158-3226

Gül, Burçin and Kılıç, Deniz and Aslan, Dilan and Bayramiçli, Mehmet and Akbulut, Özge (2019) Silicone-based simulation models for peripheral nerve microsurgery. Journal of Plastic Reconstructive & Aesthetic Surgery, 72 (3). pp. 477-483. ISSN 1748-6815 (Print) 1878-0539 (Online)

Gül, Burçin and Kılıç, Deniz and Bozkurt, Ayhan and Arıbal, Mustafa Erkin and Akbulut, Özge (2018) Silicone-based composite materials simulate breast tissue to be used as ultrasonography training phantoms. Ultrasonics, 88 . pp. 9-15. ISSN 0041-624X (Print) 1874-9968 (Online)

Gül, S. and Tabrizi, Isa Emami and Saner Okan, Burcu and Kefal, Adnan and Yıldız, Mehmet (2021) An experimental investigation on damage mechanisms of thick hybrid composite structures under flexural loading using multi-instrument measurements. Aerospace Science and Technology, 117 . ISSN 1270-9638 (Print) 1626-3219 (Online)

Güven, Zekiye Pelin and Üstbaş, Burçin and Harkness, Kellen M. and Coşkun, Hikmet and Joshi, Chakra P. and Besong, Tabot M. D. and Stellacci, Francesco and Bakr, Osman M. and Akbulut, Özge (2016) Synthesis and characterization of mixed ligand chiral nanoclusters. Dalton Transactions, 45 (28). pp. 11297-11300. ISSN 1477-9226 (Print) 1477-9234 (Online)

Habibian, Anahita and Sohouli, Abdolrasoul and Kefal, Adnan and Nadler, Ben and Yıldız, Mehmet and Suleman, Afzal (2021) Multi-material topology optimization of structures with discontinuities using peridynamics. Composite Structures, 258 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Hassannezhad, Kosar and Akyol, Yasemin and Dursun, Mehmet Can and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali (2022) Effect of metakaolin and lime on strength development of blended cement paste. Construction Materials, 2 (4). pp. 297-313. ISSN 2673-7108

Haşim, Kazım Ahmet and Kefal, Adnan (2021) Isogeometric static analysis of laminated plates with curvilinear fibers based on refined zigzag theory. Composite Structures, 256 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Hodaei, Amin and Akhlaghi Baghoojari, Omid and Khani, Navid and Aytaş, Tunahan and Sezer, Dilek and Tatlı, Buse and Menceloğlu, Yusuf Z. and Koç, Bahattin and Akbulut, Özge (2018) Single additive enables 3D printing of highly loaded iron oxide suspensions. ACS Applied Materials & Interfaces, 10 (11). pp. 9873-9881. ISSN 1944-8244 (Print) 1944-8252 (Online)

İnceoğlu, Şebnem and Aytun, Taner and Menceloğlu, Yusuf Z. and Özen, İlhan and Acar, Metin H. (2012) Morphological similarity of a tri-block copolymer processed at ambient and elevated temperatures. Korea-Australia Rheology Journal, 24 (4). pp. 313-321. ISSN 1226-119X (Print) 2093-7660 (Online)

Kefal, Adnan (2020) A novel four-node inverse-plate element for shape and stress sensing of laminated composite and sandwich plates [Lamine kompozit ve sandviç plakaların şekil ve gerilme algılaması için yeni bir dört-düğüm noktalı ters-plaka eleman]. Journal of the Faculty of Engineering and Architecture of Gazi University, 35 (4). pp. 1767-1781. ISSN 1300-1884 (Print) 1304-4915 (Online)

Kefal, Adnan (2019) An efficient curved inverse-shell element for shape sensing and structural health monitoring of cylindrical marine structures. Ocean Engineering, 188 . ISSN 0029-8018

Kefal, Adnan and Maruccio, Claudio and Quaranta, Giuseppe and Öterkuş, Erkan (2019) Modelling and parameter identification of electromechanical systems for energy harvesting and sensing. Mechanical Systems and Signal Processing, 121 . pp. 890-912. ISSN 0888-3270 (Print) 1096-1216 (Online)

Kefal, Adnan and Öterkuş, Erkan (2020) Isogeometric iFEM analysis of thin shell structures. Sensors, 20 (9). ISSN 1424-8220

Kefal, Adnan and Sohouli, Abdolrasoul and Öterkuş, Erkan and Yıldız, Mehmet and Suleman, Afzal (2019) Topology optimization of cracked structures using peridynamics. Continuum Mechanics and Thermodynamics (SI), 31 (6). pp. 1645-1672. ISSN 0935-1175 (Print) 1432-0959 (Online)

Kefal, Adnan and Tessler, Alexander and Öterkuş, Erkan (2017) An enhanced inverse finite element method for displacement and stress monitoring of multilayered composite and sandwich structures. Composite Structures, 179 . pp. 514-540. ISSN 0263-8223 (Print) 1879-1085 (Online)

Khani, Navid and Nadernezhad, Ali and Bartolo, Paulo and Koç, Bahattin (2017) Hierarchical and spatial modeling and bio-additive manufacturing of multi-material constructs. CIRP Annals - Manufacturing Technology, 66 (1). pp. 229-232. ISSN 0007-8506 (Print) 1726-0604 (Online)

Khoda, A. K. M. and Özbolat, İbrahim T. and Koç, Bahattin (2011) A functionally gradient variational porosity architecture for hollowed scaffolds fabrication. Biofabrication (Special Issue), 3 (3). ISSN 1758-5082

Koohestani, Babak and Khodadadi Darban, Ahmad and Mokhtari, Pozhhan (2018) A comparison between the influence of superplasticizer and organosilanes on different properties of cemented paste backfill. Construction and Building Materials, 173 . pp. 180-188. ISSN 0950-0618 (Print) 1879-0526 (Online)

Koohestani, Babak and Khodadadi Darban, Ahmad and Yılmaz, Erol and Mokhtari, Pozhhan and Ganetri, Ikram (2018) Influence of amine and vinyl functional groups of silanes on total performance of thermoplastic-based composites. Construction and Building Materials, 172 . pp. 98-105. ISSN 0950-0618 (Print) 1879-0526 (Online)

Laikhtman, Alex and Makrinich, Gennady and Sezen, Meltem and Yıldızhan, Melike Mercan and Martinez, Jose I. and Dinescu, Doru and Prodana, Mariana and Enachescu, Marius and Alonso, Julio A. and Zak, Alla (2017) Hydrogen chemical configuration and thermal stability in tungsten disulfide nanoparticles exposed to hydrogen plasma. Journal of Physical Chemistry C, 121 (21). pp. 11747-11756. ISSN 1932-7447

Li, Mingyang and Kefal, Adnan and Öterkuş, Erkan and Öterkuş, Selda (2020) Structural health monitoring of an offshore wind turbine tower using iFEM methodology. Ocean Engineering, 204 . ISSN 0029-8018

Lisker, Marco and Marschmeyer, Steffen and Kaynak, Mehmet and Tekin, İbrahim (2011) A sub-atmospheric chemical vapor deposition process for deposition of oxide liner in high aspect ratio through silicon vias. Journal of Nanoscience and Nanotechnology, 11 (9). pp. 8061-8067. ISSN 1533-4880

Mallik, Awadesh Kumar and Açıkbaş, Nurcan Çalış and Kara, Ferhat and Mandal, Hasan and Basu, Debabrata (2012) A comparative study of SiAlON ceramics. Ceramics International, 38 (7). pp. 5757-5767. ISSN 0272-8842

Mallik, Awadesh Kumar and Reddy, K. Madhav and Açıkbaş, Nurcan Çalış and Kara, Ferhat and Mandal, Hasan and Basu, Debabrata and Basu, Bikramjit (2011) Influence of SiC addition on tribological properties of SiAlON. Ceramics International, 37 (7). pp. 2495-2504. ISSN 0272-8842

Mehraeen, Shayan and Alkan Gürsel, Selmiye and Papila, Melih and Cebeci, Fevzi Çakmak (2017) Investigation of electrochemical actuation by polyaniline nanofibers. Smart Materials and Structures, 26 (9). ISSN 0964-1726 (Print) 1361-665X (Online)

Menşur Alkoy, Ebru and Shiosakiy, Tadashi (2009) Investigation of the effect of cerium doping on the electrical properties and leakage current behavior of lead zirconate thin films derived by the sol-gel method. Journal of the American Ceramic Society, 92 (2). pp. 396-404. ISSN 0002-7820

Nicoara, Adrian Ionut and Stoica, Alexandra Elena and Vrabec, Mirijam and Smuc Rogan, Nastja and Sturm, Saso and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali and Basaran Bundur, Zeynep and Ciuca, Ion and Vasile, Bogdan Stefan (2020) End-of-life materials used as supplementary cementitious materials in the concrete industry. Materials, 13 (8). ISSN 1996-1944

Öğüt, Erdem and Şendur, Kürşat (2011) Tuning the polarization states of optical spots at the nanoscale on the Poincar, sphere using a plasmonic nanoantenna. Applied Physics A - Materials Science & Processing, 103 (3). pp. 855-858. ISSN 0947-8396 (Print) 1432-0630 (Online)

Özden, Elif and Menceloğlu, Yusuf Z. and Papila, Melih (2010) Engineering chemistry of electrospun nanofibers and interfaces in nanocomposites for superior mechanical properties. ACS Applied Materials & Interfaces, 2 (7). pp. 1788-1793. ISSN 1944-8244 (Print) 1944-8252 (Online)

Özden-Yenigün, Elif and Bilge, Kaan and Sünbüloğlu, Emin and Bozdağ, Ergün and Papila, Melih (2017) High strain rate response of nanofiber interlayered structural composites. Composite Structures, 168 . pp. 47-55. ISSN 0263-8223 (Print) 1879-1085 (Online)

Özen, İlhan and Menceloğlu, Yusuf Z. (2010) Barrier properties of polypropylene/poly (m-xylene adipamide) and polypropylene/poly (ethylene-co-vinyl alcohol) blend films. Journal of Plastic Film and Sheeting, 26 (4). pp. 377-394. ISSN 8756-0879

Özler, Saime Burçe and Bakırcı, Ezgi and Küçükgül, Can and Koç, Bahattin (2016) Three-dimensional direct cell bioprinting for tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials . ISSN 1552-4973 (Print) 1552-4981 (Online) Published Online First http://dx.doi.org/10.1002/jbm.b.33768

Popilevsky, L. and Skripnyuk, V. M. and Beregovsky, M. and Sezen, Meltem and Amouyal, Y. and Rabkin, E. (2016) Hydrogen storage and thermal transport properties of pelletized porous Mg-2 wt.% multiwall carbon nanotubes and Mg-2 wt.% graphite composites. International Journal of Hydrogen Energy, 41 (32). pp. 14461-14474. ISSN 0360-3199 (Print) 1879-3487 (Online)

Qureshi, Anjum and Mergen, Ayhan and Singh, N. L. (2010) Swift heavy ion induced modifications in nano-crystalline microwave dielectric BaTi4O9 ceramics. Journal of Alloys and Compounds, 504 (2). pp. 407-412. ISSN 0925-8388

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2021) An improved ordinary-state based peridynamic formulation for modeling FGMs with sharp interface transitions. International Journal of Mechanical Sciences, 197 . ISSN 0020-7403 (Print) 1879-2162 (Online)

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes. International Journal of Mechanical Sciences, 182 . ISSN 0020-7403 (Print) 1879-2162 (Online)

Saner Okan, Burcu (2017) Fabrication of multilayer graphene oxide reinforced high density polyethylene nanocomposites with enhanced thermal and mechanical properties via thermokinetic mixing. Turkish Journal of Chemistry, 41 (3). pp. 381-390. ISSN 1300-0527 (Print) 1303-6130 (Online)

Saner Okan, Burcu and Marset Castro, Azucena and Seyyed Monfared Zanjani, Jamal and Akkuş Sut, Pınar and Şen, Özlem and Çulha, Mustafa and Menceloğlu, Yusuf Z. (2016) Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l-lactide-co-ε-caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation. Journal of Applied Polymer Science, 133 (22). ISSN 0021-8995 (Print) 1097-4628 (Online)

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpiççi, Hüsnü (2010) Effect of R600a on tribological behavior of sintered steel under starved lubrication. Tribology International (Sp. Iss. SI), 43 (5-6). pp. 1054-1058. ISSN 0301-679X

Seyyedrahmani, Farzad and Khandar Shahabad, Peiman and Serhat, Gökhan and Bediz, Bekir and Başdoğan, İpek (2022) Multi-objective optimization of composite sandwich panels using lamination parameters and spectral Chebyshev method. Composite Structures, 289 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Sohouli, Abdol Rasoul and Kefal, Adnan and Abdelhamid, Ahmed and Yıldız, Mehmet and Suleman, Afzal (2020) Continuous density-based topology optimization of cracked structures using peridynamics. Structural and Multidisciplinary Optimization, 62 (5). pp. 2375-2389. ISSN 1615-147X (Print) 1615-1488 (Online)

Sturm, Saso and Bencan, Andreja and Gülgün, Mehmet Ali and Malic, Barbara and Kosec, Marija (2011) Determining the stoichiometry of (K,Na)NbO(3) using optimized energy-dispersive x-ray spectroscopy and electron energy-loss spectroscopy analyses in a transmission electron microscope. Journal of the American Ceramic Society, 94 (8). pp. 2633-2639. ISSN 0002-7820

Şendur, Kürşat and Koşar, Ali and Mengüç, M. P. (2011) Localized radiative energy transfer from a plasmonic bow-tie nano-antenna to a magnetic thin film stack. Applied Physics A - Materials Science & Processing, 103 (3). pp. 703-707. ISSN 0947-8396 (Print) 1432-0630 (Online)

Topal, Serra and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldırım, Ceren and Beylergil, Bertan and Kan, Cihan and Ünal, Serkan and Yıldız, Mehmet (2023) Multiscale nano-integration in the scarf-bonded patches for enhancing the performance of the repaired secondary load-bearing aircraft composite structures. Carbon, 204 . pp. 112-125. ISSN 0008-6223 (Print) 1873-3891 (Online)

Ürk, Deniz and Demir, Elif and Bulut, Osman and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Öveçoğlu, Lütfi and Cebeci, Hülya (2016) Understanding the polymer type and CNT orientation effect on the dynamic mechanical properties of high volume fraction CNT polymer nanocomposites. Composite Structures, 155 . pp. 255-262. ISSN 0263-8223 (Print) 1879-1085 (Online)

Yaman, Bilge and Mandal, Hasan (2017) Friction and wear behavior of spark plasma-sintered cBN-added Al2O3-PSZ-based composites. Journal of the Australian Ceramic Society, 53 (1). pp. 163-172. ISSN 0004-881X

Yang, Rong and Xu, Jingjing and Özaydın İnce, Gözde and Wong, Sze Yinn and Gleasont, Karen K. (2011) Surface-tethered zwitterionic ultrathin antifouling coatings on reverse osmosis membranes by initiated chemical vapor deposition. Chemistry of Materials, 23 (5). pp. 1263-1272. ISSN 0897-4756

Yılmaz, Çağatay and Yıldız, Mehmet (2017) A study on correlating reduction in Poisson's ratio with transverse crack and delamination through acoustic emission signals. Polymer Testing, 63 . pp. 47-53. ISSN 0142-9418 (Print) 1873-2348 (Online)

Yılmaz, Melike Sevim and Yarar, Begüm and Metin, Önder and Alkan Gürsel, Selmiye (2018) A facile synthesis and assembly of ultrasmall Pt nanoparticles on reduced graphene oxide‑carbon black hybrid for enhanced performance in PEMFC. Materials & Design, 151 . pp. 29-36. ISSN 0261-3069 (Print) 0264-1275 (Online)

Papers in Conference Proceedings

Akşit, Mahmut Faruk and Kızıl, Hüseyin and Efeoğlu, İhsan and Sariibrahimoğlu, Kemal (2009) Wear performance of titanium and niobium added MOS2 coatings under isobutane exposure. In: ASME/STLE International Joint Tribology Conference (IJTC 2009), Memphis, Tennessee, USA

Demircan, Özgür and Yılmaz, C. and Kocaman, E. S. and Akay, E. and Yıldız, Mehmet (2014) Tensile and bending properties of biaxial warp knitted textile composites. In: 1st Joint Turkey-Japan Workshop (JTJW) on Polymeric Composite Materials, Istanbul, Turkey

Glowacki, Eric Daniel and Leonat, Lucia and Voss, Gundula and Bodea, Marius and Bozkurt, Zeynep and Irimia-Vladu, Mihai and Bauer, Siegfried and Sarıçiftçi, Niyazi Serdar (2011) Natural and nature-inspired semiconductors for organic electronics. In: Conference on Organic Semiconductors in Sensors and Bioelectronics IV, San Diego, CA, USA

Kefal, Adnan and Tessler, Alexander (2021) Delamination damage identification in composite shell structures based on inverse finite element method and refined zigzag theory. In: 8th International Conference on Marine Structures (MARSTRUCT), Trondheim, Norway

Khandar Shahabad, Peiman and Rafiei Anamagh, Mirmeysam and Serhat, Gokhan and Basdogan, İpek and Bediz, Bekir (2024) Design and fabrication of variable stiffness composite laminates with enhanced dynamic behavior. In: 21st European Conference on Composite Materials (ECCM21), Nantes, France

Kılıç, Deniz and Üstbaş, Burçin and Budak, Ece Polen and Eyisoylu, Hande and Yılmaz, Cem and Eldem, Barkin and Akbulut, Özge (2016) Silicone-based composites as surgical breast models for oncoplasty training. In: Humanitarian Technology: Science, Systems and Global Impact (HumTech2016), Boston, United States

Qureshi, Anjum and Gürbüz, Yaşar and Howell, Mick and Kang, Weng P. and Davidson, Jımmy L. (2010) Nanocrystalline diamond film for biosensor applications. In: 20th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes and Nitrides, Athens, Greece

Salamatgharamaleki, Saeed and Ateşpare, Asu Ece and Kohlan, Taha Behroozi and Ünal, Serkan and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Dızman, Bekir (2022) Synthesis and characterization of hydrolyzed polyoxazolines and investigation of their curing capabilities. In: 5th International Eurasian Conference on Biological and Chemical Sciences (EurasianBioChem 2022), Ankara, Turkey

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Birol, Feriha S. (2008) A study on wear rates of 100Cr6 steel running against sintered steel surfaces under dry and starved lubrication. In: The 47th Annual Conference of Metallurgists, COM 2008, Winnipeg, Manitoba, Canada

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpicci, Hüsnü (2008) Tribological behavior of sintered steel under starved lubrication in R600A environment. In: 2nd International Conference on Advanced Tribology, iCAT 2008, Singapore

Sohouli, Abdolrasoul and Kefal, Adnan and Yıldız, Mehmet and Suleman, Afzal (2019) Multi-material topology optimization of structures using peridynamics. In: 30th International Conference on Adaptive Structures and Technologies (ICAST2019), Montreal, Canada

Ünal, Serkan and Kızıldağ, Nuray and Güçlü, Serkan and Dızman, Bekir and Menceloğlu, Yusuf Z. (2022) Sustainability for polymeric fibers and textiles. In: 11th International Fiber and Polymer Research Symposium, Gebze, Kocaeli

Book

Menceloğlu, Yusuf Z. and Kırca, Mehmet B. (2008) Uluslararası rekabet stratejileri: nanoteknoloji ve Türkiye. Uluslararası Rekabet Stratejileri Dizisi; 11 . Yayın No. TÜSİAD-T/2008-11/474. TÜSİAD (Türk Sanayicileri ve İşadamları Derneği) / Sabancı Üniversitesi Rekabet Forumu, İstanbul. ISBN 978-9944-405-47-4

Volumes Edited / Special Issues

Mandal, Hasan and Komeya, Katsutoshi and Turan, Servet (2012) Special issue: SiAIONs and non-oxide ceramics preface. [Volumes Edited / Special Issues]

Thesis

(2023) Polydiacetylene-Based Supramolecular Systems: Synthesis, Characterization, And Applications. [Thesis]

Abakay, Ayça (2012) Controlled synthesis and surface modification of titanium dioxide. [Thesis]

Abbasi, Sanaz (2018) Purification, size separation and ionic fnctionalization of halloysite nanotubes. [Thesis]

Abdizadeh, Haleh (2017) Modeling and simulation of processes regulating protein binding in various environments. [Thesis]

Abdolhosseinzadeh, Sina (2017) Bandgap modulation of graphene oxide and its application in the photocatalytic deposition of metallic nanoparticles. [Thesis]

Abulizi, Anaguli (2016) Titanate nanotubes combined with graphene-based materials as a novel anode material for lithium-ion batteries. [Thesis]

Afghah, Seyedeh Ferdows (2020) Hybrid 3D bioprinting of functionalized structures for tissue engineering. [Thesis]

Akalın, Çağdaş (2017) Peridynamic modelling of deformation field on isotropic medium. [Thesis]

Akhlaghi Baghoojari, Omid (2017) Rheological investigation of colloidal systems. [Thesis]

Akkaş, Tuğçe (2015) Novel methods to prepare cross-linked enzyme aggregates (CLEA) challenging immobilization models-urease and pepsin. [Thesis]

Aktürk, Merve (2022) Synergistic effects of b4c and zno nanomaterials as electrodes for supercapacitors. [Thesis]

Al-dulaimi, Wael Ali Saeed (2022) Switching analysis of magnetic vortices in reduced dimensions under pulsed electric fields. [Thesis]

Aleinawi, Mohamad (2022) Utilization of piezoelectric effect in zinc oxide nanowires as a nanogenerator. [Thesis]

Ali, Hafiz Qasim (2019) Experimental study on static and dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors, acoustic emission, digital image correlation and scanning electron microscopy. [Thesis]

Ali, Mariamu Kassim (2014) Fabrication of poly (m-Tolyloxy-co-4-pyridinoxy phosphazene) based proton exchange membranes for fuel cell applications. [Thesis]

Alkan Taş, Buket (2022) Molecular level design of engineered coatings for antimicrobial and antibiofilm surfaces. [Thesis]

Alpaslan, Ece (2013) Deducing the role of functionalizing macromolecules in the nucleation of colloidal nanoparticles. [Thesis]

Ammar, Ameen Uddin (2022) Metal oxide and 2D material electrodes for next generation supercapacitor: ZNO and mxene. [Thesis]

Anıl, Deniz (2019) Halloysite containing polyurethane foams as insulation materials with enhanced flame retardance. [Thesis]

Ansari Hamedani, Ali (2021) Development of silicon/carbon nanocomposite anodes from simple precursors for lithium-ion batteries. [Thesis]

Araç, Özlem (2023) Gelatın nanoparticle loaded polycaprolactone-nanohydroxyapatite functionally graded scaffolds. [Thesis]

Arıcı, Ece (2018) Platinum nanoparticles supported with graphene nanoplatelets and hybrid carbon materials designed as electrocatalysts for PEM fuel cells. [Thesis]

Armağan, Efe (2016) Fabrication of stimuli responsive and conducting polymeric nanotubes by chemical vapor deposition: loading/release and sensor studies. [Thesis]

Asadipakdel, Kamal (2022) Engineering of poly(glycerol sebacate) scaffolds. [Thesis]

Asghari Arpatappeh, Farzin (2022) Multiphase multiscale particle-nanofiber interactions in composites. [Thesis]

Avaz, Merve Senem (2017) Experimental and theoretical approaches in macromolecules design, synthesis, modification and nanosensor applications. [Thesis]

Avcı, Gökay (2015) Investigation of machinability of green bodies of solid cast alumina through the addition of a poly(carboxylate ether)-based superplasticizer. [Thesis]

Aydın, Kinyas (2013) Self-crosslinkable superabsorbent hydrogels based on vinlalkoxysilanes as crosslinker. [Thesis]

Aykut, Ayşe Özlem (2013) Redistribution of states and inducing new channels for conformational change: computational studies on calmodulin. [Thesis]

Aytun, Taner (2010) Building lithium fluoride nanoparticle films for organic photovoltaics. [Thesis]

Bakhtiari, Bahareh (2019) Fabrication of graphene oxide and graphene foams for Li-ion batteries. [Thesis]

Bakhtiari, Rokhsareh (2017) Macroscopic assembly of flexible and strong graphene fibers. [Thesis]

Bakırcı, Ezgi (2016) Development of cell sheet based bioink for 3D bioprinting applications. [Thesis]

Barak, Melike (2018) Synthesis and characterization of highly stable functional silica nanoparticles for LbL assembly. [Thesis]

Bayram, Vildan (2015) Development of graphene supported catalyst nanoparticles for polymer electrolyte membrane (PEM) fuel cells. [Thesis]

Baysal, Mustafa (2012) Coal bed methane potential and biogasification of soma lignite. [Thesis]

Baysal, Mustafa (2018) Low-Temperature catalytic synthesis of boron nitride nanotubes by alkalı metal ferrites. [Thesis]

Belce, Yonca (2019) Functional thin film coatings of porphyrins and phthalocyanines by layer-by-layer assembly. [Thesis]

Belen, Ece (2014) An experimental study on the interfacial characteristics of fiber reinforced polymeric composites enhanced with nano-scale materials. [Thesis]

Benli, Ahmet Deniz (2019) Nanocomposite fuel cells. [Thesis]

Berktaş, İlayda (2020) Facile synthesis of graphite-and graphene-based hybrid additives by silanization and effects of these additives on the thermal conductivity of cementitious grouts used in shallow geothermal systems. [Thesis]

Bilge, Kaan (2012) Multi-scale nature of composite materials: three case studies. [Thesis]

Bilge, Kaan (2017) Sub-phase design for electrospun nanofibrous interlayer toughening in hierarchical composites. [Thesis]

Birgün, Nihan (2022) Preparation and characterization of aliphatic cyclopolymer derived membranes for water treatment. [Thesis]

Birkan, Burak (2009) Polymer assisted fabrication of nanoparticles on electrospun nanofibers. [Thesis]

Boz, Emre Burak (2019) Metal-Organic framework/graphene oxide derived porous carbons for platinum based electrocatalysts for oxygen reduction reaction. [Thesis]

Bozat, Özgür (2008) Decoherence and entanglement in single molecule magnets. [Thesis]

Bozoklu, Gülay (2008) Improvement in barrier properties of polymers used in packaging industry: pet/N-MXD6 blends. [Thesis]

Charkhesht, Vahid (2020) Novel Electrospun Anatase/Poly(3,4-Ethylenedioxythiophene) Polystyrene Sulfonate-based Li-ion Battery Anodes and their Electrochemical Performances. [Thesis]

Çakıroğlu, Dilek (2016) An investigation on electrochemical performance of supercapacitors assembled with vertically aligned & entangled carbon nanotube and conductive polymer. [Thesis]

Çavuşlar, Özge (2015) Fluorescent nanohybrids based on asymmetrical cyanine dyes decorated carbon nanotubes. [Thesis]

Çetin, Ebru (2023) Deciphering The Underlying Resistance-Conferring Mechanisms Of Dihydrofolate Reductase Using Energy Landscape Theory. [Thesis]

Çilingir, Halime Didem (2008) "Equivalent" material properties for designing ionic polymer metal composite actuators by equivalent bimorph beam theory. [Thesis]

Çolak, Oğuzhan (2020) Multiscale modelling of squid inspired tandem repeat proteins. [Thesis]

Çorapcıoğlu, Gülcan (2016) Conventional and flash sintering of stoichiometric alkaline or niobium excess sodium potassium niobate ceramics. [Thesis]

Çöloğlu, Hale Nur (2011) Phase transitions into multidomain states in ferroelectric thin films with depletion charges and partial electrode screening. [Thesis]

Dağdeviren, Canan (2009) Dielectric behavior characterization of functional fibrous-ceramic/polymer nanocomposites. [Thesis]

Dalgıçdir, Cahit (2009) Investigation of barrier properties of as cast and biaxially stretched pet/evoh and peti/evoh blend films. [Thesis]

Delipınar, Tuğçe (2022) The effect of geometry on cell activity for crosstalk avoidance using a stimulated brain co-culture system on a multielectrode array. [Thesis]

Demir, Mustafa Muammer (2001) Electrospinning and wet-spinning of elastic fibers. [Thesis]

Demir, Mustafa Muammer (2004) Solution processing: fabrication and characterization of polymeric nanocomposite films and polystyrene nanoparticles. [Thesis]

Demiryürek, Rıdvan (2014) Surface modification of stimuli responsive polymers by wrinkling method: surface morphology and bacterial adsorption studies. [Thesis]

Deniz, Ataman (2014) The investigation of interfaces of multiaxis fiber reinforced composites by fiber bragg grating sensors. [Thesis]

Dericiler, Kuray (2023) Fabrication of Lightweight And Durable Thermoplastic Composites For Injection Molding With The Integration Of Waste-Driven Reinforcing Materials. [Thesis]

Dikyol, Caner (2020) Development of embedded multimaterial bioprinting platform for the biofabrication of vascular tissues. [Thesis]

Doğan, Nesibe Ayşe (2014) Synthesis and characterization of novel waterborne polyurethane dispersions. [Thesis]

Dumanlı, Ahu Gümrah (2008) Effect of metal catalyst and tailoring the conditions for cnf/cnt growth through cvd. [Thesis]

Durmuş Sayar, Ayşe (2024) Enhancement of interfacial interactions in fiber-reinforced Polymeric composites with multifunctıonal carbon Nanomaterials. [Thesis]

Durmuş Sayar, Ayşe (2017) Synthesis and characterization of branched, functional polyurethane dispersions as a technology platform for self-crosslinking textile coatings. [Thesis]

Dündar Tekkaya, Ezgi (2015) Synthesis and characterization of metal loaded mcm-41 zeotypes and their utilization in hydrogen storage. [Thesis]

Egil, Abdurrahim Can (2021) Design and synthesis of stimuli responsive polymeric nanostructures for drug delivery applications. [Thesis]

Elmacı, Dilşah Nur (2022) Computational design of a protein-based coenzyme a biosensor. [Thesis]

Emami Tabrizi, Isa (2020) Understanding Failure Mechanisms in Hybrid Fiber Reinforced Laminates through the Combined usage of DIC, AE, Thermography and Optic Based Systems. [Thesis]

Erçay, Egehan (2023) Synergetıc Effects Of Nano-Sized Zinc Oxide Obtained From Various Sources And Carbonaceous Materials In Energy Storage Systems. [Thesis]

Erden, Ayça (2008) Synthesis and optimization of carbon nanofiber templated polypyrrole. [Thesis]

Ergene, Arzu (2022) Structural characteristics in long afterglow strontium aluminate compounds: An investigation with Raman and FTIR spectroscopy. [Thesis]

Ergün, Aslı (2011) Microwave assisted synthesis of MCM-41 type mesoporous materials and diffusion of organic vapors in porous media: MCM-41 and carbon nanotubes. [Thesis]

Eskin, Murat Gökhan (2018) Polymer electrolyte membrane fuel cells operating under ultra-low stoichiometric anode flow conditions. [Thesis]

Eskin, Murat Gökhan (2011) The role of boron in phosphorescence persistence of rare-earth co-activated alkalai aluminates. [Thesis]

Fırlar, Emre (2008) Examination of a micromechanics based failure criterion for non-crimp fiber reinforced composite laminates. [Thesis]

Ghobadi, Sajjad (2015) Development of rGO/PANI/PVA-based electrospun nanocomposites. [Thesis]

Girişken, Çağla (2021) Novel low shrinkage thermoplastic olefins with cool pigments additives: Desing, preparation and performance evaluation. [Thesis]

Goharibajestani, Zahra (2017) Decoration of graphene sheets by metal oxide particle: synthesis, characterization, and application in hydrogen storage. [Thesis]

Güçlü, Utku (2018) Monitoring and identification of progressive damage in fiber reinforced composite structures using non-destructive testing. [Thesis]

Gül, Burçin (2018) Design and fabrication of silicone-based composite tissue-mimicking phantoms for medical training. [Thesis]

Günay, Anıl (2008) Development of a displacement sensor towards detecting quantum fluctuations in nanoelectromechanical systems. [Thesis]

Gündoğdu, Selin Öykü (2023) Development Of Photo-Triggered Controlled Release Systems As Pesticide Nanoformulations. [Thesis]

Gürel, Derya Berkin (2021) Design and prototyping of sub-millimeter-period undulators for free electron laser. [Thesis]

Güven, Gökçe (2013) Investigating the binding-release mechanism of periplasmic ferric binding protein by ph variations and point mutations. [Thesis]

Güven, Zekiye Pelin (2014) Synthesis and characterization of chiral mixed ligand nanoclusters and nacre-structure. [Thesis]

Haghighi Poudeh, Leila (2018) Design and manufacturing of dimensionally controlled graphene based hybrid structures by core-shell electrospinning for energy storage systems. [Thesis]

Haghmoradi, Navid (2021) Precisely controlled synthesis of reduced graphene oxide supported electrocatalysts for PEM fuel cells by pulsed photocatalytic deposition. [Thesis]

Hassan Nezhad, Kosar (2020) Activation of aluminosilicate materials. [Thesis]

Heinz, Özge (2013) Polymer-filler interactions in polyether based thermoplastic polyureathane/silica nanocomposites. [Thesis]

Hodaei, Amin (2018) A single additive for 3D printing of highly-concentrated iron oxide inks. [Thesis]

Iskandarani, Bilal (2022) Pem fuel cell electrodes: Nanofiber-based hybrid and CeO2 included electrodes for boosted performance. [Thesis]

İnan Akmehmet, Güliz (2015) Investigating the origins of long persistence in strontium aluminate phosphors by nanoscale resolved imaging and spectroscopy. [Thesis]

İnanç, İbrahim (2011) Predicting properties of proteins and polymers by coarse grained methods and using nanoprobes. [Thesis]

Jamil, Esaam (2015) Modification of graphene oxide as efficient catalyst support for polymer electrolyte membrane fuel cells. [Thesis]

Jamil, Muhammad Faisal (2017) Synthesis of platinum nanoparticles on graphene via electrophoretic deposition as catalyst for PEMFC. [Thesis]

Javanshour, Farzin (2017) Nanofibrous and laminated nanocomposites: manufacturing and characterization. [Thesis]

Kaçar, Gökhan (2009) Multi-scale study of the dynamics of self-organizing molecular systems. [Thesis]

Karahan, Bahar Burcu (2012) Ionic polymer metal composites (IPMCs) based on radiation grafted polystyrenesulfonıc acid onto poly (ethylene- alttetrafluoroethylene) (ETFE-g-PSSA). [Thesis]

Kayalan, Cemre Irmak (2022) Optical engineering of titanium nitride thin films for nanoplasmonic biosensing. [Thesis]

Khabbazabkenar, Sirous (2020) Investigation of phase evolotion during crystallization of long afterglow strontium aluminate phosphor (Sr4Al14O25): The B2O3 effect. [Thesis]

Khan, Raja Muhammad Awais (2021) Failure investigation of composite materials using multi-instrument experimental techniques and numerical method. [Thesis]

Khassaf, Hamidreza (2012) Synthesis and electrical characterization of bismuth ferrite thin films. [Thesis]

Khodabakhsh, Mohammadreza (2014) Effect of ionic radius of a-site dopants on the phase transition temperature and crystal structure of bismuth ferrite/ Mohammadreza Khodabakhsh; thesis advisor İbrahim Burç Mısırlıoğlu. [Thesis]

Khorsand Kheirabad, Atefeh (2018) Synthesis and characterization of self-crosslinking polyurethanes and their waterborne dispersions. [Thesis]

Kılıç, Cem Burak (2011) Improving the synthesis of 3-nitro-1,2,4-triazol-5one and ameliorating Its particle shape. [Thesis]

Kıral, Barış Emre (2020) Predicting in-plane uniaxial compressive moduli of hexagonal honeycombs using experimental analogues. [Thesis]

Kocabaş Ataklı, Özlem Züleyha (2013) Fabrication of nano and porous materials & their utilization in the purification of water contaminated with arsenic, copper, and lead. [Thesis]

Kocaman, Esat Selim (2015) Structural health monitoring of fiber reinforced and sandwich composites with embedded fiber Bragg grating sensors. [Thesis]

Koçanalı, Atakan (2021) Upcycling to sustainable conversion of polypropylene waste to graphene grown talc hybrids as additive for efficient thermoplastic processing and its systematic life cycle assessment. [Thesis]

Konyalı, Haluk (2008) Long time stress relaxation of unfilled and filled amorphous networks under uniaxial tension. [Thesis]

Köken, Deniz (2021) H-BN nanostructures; synthesis and applications. [Thesis]

Köken, Deniz (2016) Synthesis and optimization of boron nitride nanotubes for stable aqueous dispersions. [Thesis]

Kölgesiz, Sarp (2023) Polymer nanocomposites as active food packaging materials to improve the shelf life of fruits and vegetables. [Thesis]

Kurt, Hasan (2016) Investigating the effects of nanostructured dielectric lithium fluoride and plasmonic gold interlayers in organic photovoltaics, including the use of in-situ impedance spectroscopy. [Thesis]

Liu, Gökşin (2022) Biochemical, biophysical and kinetic characterization of haemophilus influenzae ferric binding protein. [Thesis]

Liu, Gökşin (2015) Design and development of a microfluidic device to monitor iron binding dynamics in iron transport proteins. [Thesis]

Mahdipour, Forough (2022) Formation of calcium phases in the polycrystalline α-alumina ceramics. [Thesis]

Mehraeen, Shayan (2018) Bending actuators based on ionic electroactive polymers. [Thesis]

Melemez, Fazlı Fatih (2013) An experimental study on the incorporation of carbon nanotubes into resin transfer molded composites. [Thesis]

Menceloğlu, Yeşim (2021) Synthesis and swelling-release behavior of superabsorbent nanocomposites. [Thesis]

Mercimek, Rabia (2023) Effect of molds on curing in pdms fabrication and deformation in pdms based microfluidic chips. [Thesis]

Meriç, Cem (2022) Pyridine-peg functionalized graphene nucleants for protein crystallization. [Thesis]

Mitmit, Ceren (2022) Development of functional multilayer coatings for gas sensing and smart wındow applications. [Thesis]

Mohammad Moradi, Omid (2017) Combined effect of strontium content and electrode type on electrical properties of BaxSr1-xTiO3 thin-films. [Thesis]

Mojarrad, Naeimeh Rajabalizadeh (2022) Electrospun sulfonated silica-based proton exchange membranes for pem fuel cells. [Thesis]

Mokhtari, Pozhhan (2019) New low cost and green composite binder for construction. [Thesis]

Mousavi, Mirsajjad (2019) Continous-flow photocatalytic reactor for the precisely controlled deposition of metallic nanoparticles. [Thesis]

Mülayim, Murat (2009) Optimal paths in residue networks identify communication pathways in proteins. [Thesis]

Najib, Sumaiyah (2020) Investigation of asymmetric hybrid supercapacitor based on morphology of zinc oxide electrode materials for high energy supercapacitors. [Thesis]

Namlı, İlayda (2022) A novel methodology for cancer diagnosis and treatment using new generation microfluidic devices: hydrodynamic cavitation on a chip. [Thesis]

Oğuz, Oğuzhan (2017) Structure-property behavior of poly(ethylene oxide) based poly(urethane-urea) copolymers and their nanocomposites reinforced by silica nanoparticles. [Thesis]

Okyay, Firuze (2009) Evolution of carbon structures in the pyrolysis of petroleum pitches. [Thesis]

Okyay Öner, Firuze (2014) Preparation and characterization of modified polyether ether ketone (PEEK-WC) membranes for polymer assisted ultrafiltration of Cu2+ IONS from water. [Thesis]

Omar, Mohamed Ahmed Abdellah (2023) Understanding granulation of ceramic powders: Case study (Al2O3). [Thesis]

Ongun, Nihan (2014) Synthesis of waterborne, branched, functional poly(urethane)s and their applications. [Thesis]

Oruç, Betül (2018) Carbon nanotube based hybrid nanostructures as photothermal antimicrobial nanomaterials. [Thesis]

Ölmez, Burak (2023) Morphology-based analysis of li-ion storage behavior of single crystal hematite (α-FE2O3) nanostructures. [Thesis]

Örüm, Aslıhan (2013) Parameters effecting the rheology of particle filled polymeric suspensions. [Thesis]

Özbaykal, Gizem (2015) On interaction patterns in proteins. [Thesis]

Özçelik, Necdet (2021) Preparation and incorporation of multi-functional carbon nano materials into fiber reinforced polymeric composites. [Thesis]

Özdemir, Nazlı Gülsine (2011) An experimental study on the process monitoring of resin transfer molded composite structures using fiber optic sensors. [Thesis]

Özden, İpeknaz (2018) Decellularized extracellular matrix-agarose hybrid bioink development for 3D bioprinting applications. [Thesis]

Özden Yenigün, Elif (2013) Designed-in molecular interactions and cross-linking interface for superior nanocomposites: a multi-scale insight. [Thesis]

Özel, Burcu (2011) Polymer particle interactions in nanocolloids. [Thesis]

Özyiğit, Samet (2022) Multi scalable design and performance characterization of glass fiber reinforced epoxy composites by ıncorporation of hexagonal boron nitride in resin and on ınterfaces. [Thesis]

Pishva, Parsa (2021) A novel Staphylococcus aureus-modified electrochemical biosensor for determination of heavy metals. [Thesis]

Rahimi, Mohammad Naqib (2020) Peridynamic modelling of internal features and interfaces for material toughening. [Thesis]

Rajabalizadeh Mojarrad, Naeimeh (2018) Proton exchange membranes prepared by radiation grafting of n-vinyl imidazole/4-vinyl pyridine onto poly (ethylene-co-tetrafluoroethylene) for high-temperature PEM fuel cells. [Thesis]

Rastgoo, Madineh (2023) Direk Ink Writing Of Waterborne Polyurethane As A Biomedical Matrix: Assessing Mechanical Properties And The Performance Of Controlled Release. [Thesis]

Sadeghi, Sahl (2016) Novel radiation grafted membranes based on fluorinated polymers for proton exchange membrane fuel cell. [Thesis]

Sadighikia, Sina (2016) 3D electron microscopy investigations of human dentin and ion beam irradiation effect on biocompatible anatase TiO2 using focused ion beam based techniques. [Thesis]

Saeidi Harzand, Sahand (2018) Carbon dioxide capture by adsorption on a biomass based activated carbon. [Thesis]

Saeidiharzand, Shaghayegh (2023) Anti-Icing Functional Biphilic Surfaces And Functionalized Multiscale Metal Organic Framework-Based Coatings. [Thesis]

Salimkhani, Hamed (2020) Enhancement in ionic conductivity of Dysprosium doped Li7La3Zr2O12 solid electrolyte applied in Li-ion batteries. [Thesis]

Saner Okan, Burcu (2011) An improved technique for the exfoliation of graphene nanosheets and utilization of their nanocomposites as fuel cell electrodes. [Thesis]

Sayın, Sezin (2019) Fabrication and characterization of polymeric nanofibers and nanotubes for controlled release of rose bengal. [Thesis]

Semsari Parapari, Sorour (2015) Effect of alternative fuels on the microstructure and strength development of cement paste. [Thesis]

Semsari Parapari, Sorour (2020) Fluorination of vanadium oxy-phosphates for high-energy cathode materials of li-ion batteries. [Thesis]

Sepehri Gohar, Maryam (2023) Reduced Graphene Oxide/Polyaniline pH Sensor Based on Hybrid Microfabrication and Flexible Electronics Processes. [Thesis]

Seviniş, Emine Billur (2020) Synthesis and characterization of highly branched, functional poly(arylene ether sulfone)s for water purification membranes. [Thesis]

Seyyed Monfared Zanjani, Jamal (2016) Novel design and manufacturing of advanced multifunctional structural nanocomposites containing self-healing fibers and graphene sheets with structural health monitoring capabilities. [Thesis]

Shakoorioskooie, Mahdieh (2017) Carbon nanofiber supported Pt nanoparticles with an accurate size control through copolymer stabilization and chemical reduction for PEM fuel cell application. [Thesis]

Shalima, Shawuti (2014) Ionic conduction mechanisms in nano-composite electrolyte and their relationship to micro-structural features. [Thesis]

Sheibani Aghdam, Araz (2020) Design and Engineering of Slippery Liquid-Infused Porous Surfaces by LbL Technique for Icephobic Surfaces and Hydrodynamic Cavitation. [Thesis]

Sirer, Irmak (2006) Understanding protein dynamical transition and protein-water interaction from dielectric relaxation calculations. [Thesis]

Şahin Dündar, Gülayşe (2023) Sustainable Manufacturing Of Graphene-Reinforced Polypropylene Composites By Tailoring Compound Properties And Process Techniques. [Thesis]

Şen, Canhan (2018) Electric field control of interfacial spins in ferroelectric/ferromagnetic junctions. [Thesis]

Şentürk, Efsun (2022) 3D bioprinting of osteochondrial interface tissue. [Thesis]

Şenuysal, Hilal (2018) Automated nanomaterial integrated repair patch production and its implementation for carbon fiber-reinforced composites. [Thesis]

Şimşek, Eren (2012) Dual scale roughness driven perfectly hydrophobic surfaces prepared by electrospraying a polymer in good solvent-poor solvent systems. [Thesis]

Şişman, Neslihan (2022) Growth and characterization of molybdenum-based oxide thin film by RF magnetron sputtering. [Thesis]

Tansan, Murat (2019) Tailoring interfacial interactions in fiber reinforced polymeric composites by the electrospray deposition of waterborne carbon nanotubes. [Thesis]

Taş, Cüneyt Erdinç (2021) Hybrid polymeric materials comprising clay nanotubes, photothermal agents and phase change materials for food, water and energy applications. [Thesis]

Taş, Sinem (2011) Production of carbon nanotubes using Fe-FSM-16, co-FSM-16 and Ni-FSM-16 type mesoporous catalytic materials by chemical vapor deposition. [Thesis]

Taşdelen, Melih Can (2020) CMOS-Compatible scalable microfabrication of graphene polymeric strain gauge arrays. [Thesis]

Taşdemir, Adnan (2020) Development of metal&metal oxides decorated graphene-based electrode materials for next generation LI-ION LI-O2 batteries. [Thesis]

Taşdemir, Zuhal (2009) Flexible ceramic-polymer composite substrates with spatially variable dielectrics for miniaturized RF applications. [Thesis]

Torabfam, Milad (2023) Design And Synthesis Of Green Nanostructures And Their Applications. [Thesis]

Toufani, Maryam (2020) Synergy of Nano-ZnO and 3D-Graphene Foam Electrodes for Asymmetric Supercapacitor Devices. [Thesis]

Tufani, Ali (2018) Vapor phase synthesis of smart membranes for macromolecule separation applications. [Thesis]

Turgut, Deniz (2011) Network characterization of packing architecture for condensed matter systems. [Thesis]

Tütüncüoğlu, Atacan (2023) Titanium Nitride Plasmonic Arrays For Photovoltaic Thin Film Solar Cell Applications. [Thesis]

Uluç, Vanya Anna (2008) Synthesis and characterization of phosphorescent strontium aluminate compounds. [Thesis]

Ülkümen, Erim (2013) Nano-perlite as an alternative reinforcing filler to silica in PDMS composites. [Thesis]

Ünal, Dilay (2014) CFD investigation of the effect of spinneret geometry on the flow behavior of multiphase polymeric fluids. [Thesis]

Ürkmez, Ayça (2015) High temperature processable nanofibrous interlayers for composite structures. [Thesis]

Yalçınkaya, Esra (2022) Investigation of graphene growth on different natural substrates from aromatic plastic wastes and its systematic life cycle assessment. [Thesis]

Yarali, Miad (2015) Novel expanded titanate based materials for energy applications. [Thesis]

Yarar Kaplan, Begüm (2017) Gas diffusion electrodes based on carbon and graphene for pem fuel cell. [Thesis]

Yıldızhan, Melike Mercan (2016) Structural and electronic investigation of Li2O-TiO2 system. [Thesis]

Yılmaz, Çağatay (2018) Monitoring micro-damage accumulation based on reduction in elastic properties using fiber bragg grating sensors, and acoustic emission and thermography methods in fiber reinforced polymeric composites. [Thesis]

Yiğitalp, Ayça (2019) Nafion modified NCA cathode synthesis for superior cycling performance of lithium-ION batteries. [Thesis]

Yorulmaz, Yelda (2018) Optimization of synthesis conditions of boron nitride nanotubes (BNNTS) and their effects on epoxy resin curing. [Thesis]

Yurduşen, Aysu (2020) Hierarchical porous metal-organic frameworks (MOFS): design, synthesis, and their application as gas adsorption materials. [Thesis]

Yüce, Sena (2022) Clay-based photothermal agents for antibacterial applications. [Thesis]

Yüksel, Seren (2008) Removal of boron from aqueous solutions by adsorption using natural adsorbents. [Thesis]

Zakharyuta, Anastasia (2010) Reagent-free covalent crosslinking of chitosan-gelatin films for medical applications. [Thesis]

Zemberekçi, Lyn (2020) Rheological control of reactive and nonreactive particles. [Thesis]

Zeybek, Mehmet Can (2017) Controlled loading and release studies of payload molecules from conducting polymer nanotubes. [Thesis]

Zırhlı, Onur (2019) Development of a novel method to obtain complex shaped magnetic structures for additive manufacturing. [Thesis]