Items where Author is "Budak, Erhan"

Group by: Item Type | No Grouping
Number of items: 201.

Article

Bagherzadeh, Amin and Budak, Erhan and Ozlu, Emre and Koç, Bahattin (2023) Machining behavior of Inconel 718 in hybrid additive and subtractive manufacturing. CIRP Journal of Manufacturing Science and Technology, 46 . pp. 178-190. ISSN 1755-5817

Rahimzadeh Berenji, Kaveh and Budak, Erhan (2023) A general model for uncut chip geometry, process kinematics, and mechanics of orthogonal turn-milling process. CIRP Journal of Manufacturing Science and Technology, 43 . pp. 57-70. ISSN 1755-5817

Weng, Jian and Saelzer, Jannis and Berger, Sebastian and Zhuang, Kejia and Bagherzadeh, Amin and Budak, Erhan and Biermann, Dirk (2023) Analytical and experimental investigations of rake face temperature considering temperature-dependent thermal properties. Journal of Materials Processing Technology, 314 . ISSN 0924-0136 (Print) 1873-4774 (Online)

Schmitz, Tony and Betters, Emma and Budak, Erhan and Yüksel, Esra and Park, Simon and Altıntaş, Yusuf (2023) Review and status of tool tip frequency response function prediction using receptance coupling. Precision Engineering, 79 . pp. 60-77. ISSN 0141-6359 (Print) 1873-2372 (Online)

Jamshidi, Hamid and Budak, Erhan (2022) A digital twin-based framework for selection of grinding conditions towards improved productivity and part quality. Journal of Intelligent Manufacturing . ISSN 0956-5515 (Print) 1572-8145 (Online) Published Online First https://dx.doi.org/10.1007/s10845-022-02031-x

Budak, Erhan and Matsubara, Atsushi and Donmez, Alkan and Munoa, Jokin (2022) Mechanical interfaces in machine tools. CIRP Annals, 71 (2). pp. 647-670. ISSN 0007-8506 (Print) 1726-0604 (Online)

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yıldız, Saltuk and Budak, Erhan (2022) Chatter stability of thin-walled part machining using special end mills. CIRP Annals, 71 (1). pp. 365-368. ISSN 0007-8506 (Print) 1726-0604 (Online)

Bagherzadeh, Amin and Koç, Bahattin and Budak, Erhan and Işık, Murat (2022) High-speed machining of additively manufactured Inconel 718 using hybrid cryogenic cooling methods. Virtual and Physical Prototyping, 17 (3). pp. 419-436. ISSN 1745-2759 (Print) 1745-2767 (Online)

Rahimzadeh Berenji, Kaveh and Budak, Erhan (2022) Improved machining performance through turn-milling. Journal of Machine Engineering, 22 (2). pp. 5-17. ISSN 1895-7595 (Print) 2391-8071 (Online)

Bilgili, Deniz and Budak, Erhan and Altintas, Yusuf (2022) Multibody dynamic modeling of five-axis machine tools with improved efficiency. Mechanical Systems and Signal Processing, 171 . ISSN 0888-3270 (Print) 1096-1216 (Online)

Iglesias, Alexander and Tunç, Lütfi Taner and Özsahin, Orkun and Franco, Oier and Munoa, Jokin and Budak, Erhan (2022) Alternative experimental methods for machine tool dynamics identification: a review. Mechanical Systems and Signal Processing, 170 . ISSN 0888-3270 (Print) 1096-1216 (Online)

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan (2021) Dynamics and chatter stability of crest-cut end mills. International Journal of Machine Tools and Manufacture, 171 . ISSN 0890-6955 (Print) 1879-2170 (Online)

Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2021) Correction to: Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V (The International Journal of Advanced Manufacturing Technology, (2018), 95, 5-8, (1617-1634), 10.1007/s00170-017-1329-3). International Journal of Advanced Manufacturing Technology, 117 (1-2). pp. 689-690. ISSN 0268-3768 (Print) 1433-3015 (Online)

Jamshidi, Hamid and Budak, Erhan (2021) A 3D analytical thermal model in grinding considering a periodic heat source under dry and wet conditions. Journal of Materials Processing Technology, 295 . ISSN 0924-0136 (Print) 1873-4774 (Online)

Jamshidi, Hamid and Budak, Erhan (2021) On the prediction of surface burn and its thickness in grinding processes. CIRP Annals, 70 (1). pp. 285-288. ISSN 0007-8506 (Print) 1726-0604 (Online)

Yüksel, Esra and Budak, Erhan and Özlü, Emre and Oral, Ahmet and İğrek, Fatih and Tosun, Fulya (2021) Prediction of thermal growth in a high-speed spindle by considering thermo-mechanical behavior. MM Science Journal, 2021 . pp. 4526-4533. ISSN 1803-1269 (Print) 1805-0476 (Online)

Bagherzadeh, Amin and Kuram, Emel and Budak, Erhan (2021) Experimental evaluation of eco-friendly hybrid cooling methods in slot milling of titanium alloy. Journal of Cleaner Production, 289 . ISSN 0959-6526 (Print) 1879-1786 (Online)

Altintas, Yusuf and Stepan, Gabor and Budak, Erhan and Schmitz, Tony and Kilic, Zekai Murat (2020) Chatter stability of machining operations. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 142 (11). ISSN 1087-1357 (Print) 1528-8935 (Online)

Jamshidi, Hamid and Budak, Erhan (2020) An analytical grinding force model based on individual grit interaction. Journal of Materials Processing Technology, 283 . ISSN 0924-0136 (Print) 1873-4774 (Online)

Yüksel, Esra and Ertürk, Ahmet Semih and Budak, Erhan (2020) A hybrid contact implementation framework for finite element analysis and topology optimization of machine tools. Journal of Manufacturing Science and Engineering, 142 (8). ISSN 1087-1357 (Print) 1528-8935 (Online)

Özlü, Emre and Ebrahimi Araghizad, Arash and Budak, Erhan (2020) Broaching tool design through force modelling and process simulation. CIRP Annals - Manufacturing Technology, 69 (1). pp. 53-56. ISSN 0007-8506 (Print) 1726-0604 (Online)

Jamshidi, Hamid and Gürtan, Mert and Budak, Erhan (2019) Identification of active number of grits and its effects on mechanics and dynamics of abrasive processes. Journal of Materials Processing Technology, 273 . ISSN 0924-0136 (Print) 1873-4774 (Online)

Tehranizadeh, Faraz and Koca, Recep and Budak, Erhan (2019) Investigating effects of serration geometry on milling forces and chatter stability for their optimal selection. International Journal of Machine Tools and Manufacture, 144 . ISSN 0890-6955 (Print) 1879-2170 (Online)

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2019) Effects of turn-milling conditions on chip formation and surface finish. CIRP Annals - Manufacturing Technology, 68 (1). pp. 113-116. ISSN 0007-8506 (Print) 1726-0604 (Online)

Karaguzel, Umut and Budak, Erhan (2018) Investigating effects of milling conditions on cutting temperatures through analytical and experimental methods. Journal of Materials Processing Technology, 262 . pp. 532-540. ISSN 0924-0136 (Print) 1873-4774 (Online)

Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems. Mechanical Systems and Signal Processing, 111 . pp. 423-441. ISSN 0888-3270 (Print) 1096-1216 (Online)

Mohammadi, Yaser and Azvar, Milad and Budak, Erhan (2018) Suppressing vibration modes of spindle-holder-tool assembly through FRF modification for enhanced chatter stability. CIRP Annals - Manufacturing Technology, 67 (1). pp. 397-400. ISSN 0007-8506 (Print) 1726-0604 (Online)

Cakir, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2018) Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face. International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 81-89. ISSN 0268-3768 (Print) 1433-3015 (Online)

Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2018) Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1617-1634. ISSN 0268-3768 (Print) 1433-3015 (Online)

Bagherzadeh, Amin and Budak, Erhan (2018) Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach. Tribology International, 119 . pp. 510-520. ISSN 0301-679X (Print) 1879-2464 (Online)

Azvar, Milad and Budak, Erhan (2017) Multi-dimensional chatter stability for enhanced productivity in different parallel turning strategies. International Journal of Machine Tools and Manufacture, 123 . pp. 116-128. ISSN 0890-6955 (Print) 1879-2170 (Online)

Yiğit, Ufuk and Ciğeroğlu, Ender and Budak, Erhan (2017) Chatter reduction in boring process by using piezoelectric shunt damping with experimental verification. Mechanical Systems and Signal Processing, 94 . pp. 312-321. ISSN 0888-3270

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2017) Modelling thermally induced deformations on tool during turn-milling (Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi). Journal of the Faculty of Engineering and Architecture of Gazi University, 32 (3). pp. 865-875. ISSN 1300-1884 (Print) 1304-4915 (Online)

Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) Generalized model for dynamics and stability of multi-axis milling with complex tool geometries. Journal of Materials Processing Technology, 238 . pp. 446-458. ISSN 0924-0136 (Print) 1873-4774 (Online)

Çomak, Alptunç and Budak, Erhan (2016) Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability. (Accepted)

Aksu, Burak and Çelebi, Ceren and Budak, Erhan (2016) An experimental investigation of oblique cutting mechanics. Machining Science and Technology, 20 (3). pp. 495-521. ISSN 1091-0344 (Print) 1532-2483 (Online)

Munoa, J. and Beudaert, X. and Dombovari, Z. and Altıntaş, Y. and Budak, Erhan and Brecher, C. and Stepan, G. (2016) Chatter suppression techniques in metal cutting. CIRP Annals - Manufacturing Technology, 65 (2). pp. 785-808. ISSN 0007-8506 (Print) 1726-0604 (Online)

Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Budak, Erhan (2016) Machining strategy development and parameter selection in 5-axis milling based on process simulations. International Journal of Advanced Manufacturing Technology, 85 (5-8). pp. 1483-1500. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Budak, Erhan and Bilgen, Samet and Zatarain, Mikel (2016) Process simulation integrated tool axis selection for 5-axis tool path generation. CIRP Annals - Manufacturing Technology, 65 (1). pp. 381-384. ISSN 0007-8506 (Print) 1726-0604 (Online)

Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2016) Effects of tool axis offset in turn-milling process. Journal of Materials Processing Technology, 231 . pp. 239-247. ISSN 0924-0136

Budak, Erhan and Özlü, Emre and Bakioğlu, Hayri and Barzegar Osgouei, Zahra (2016) Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces. CIRP Annals - Manufacturing Technology, 65 (1). pp. 121-124. ISSN 0007-8506 (Print) 1726-0604 (Online)

Öztürk, Erdem and Çomak, Alptunç and Budak, Erhan (2016) Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes. Journal of Sound and Vibration, 360 . pp. 17-30. ISSN 0022-460X (Print) 1095-8568 (Online)

Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) Identification of bearing dynamics under operational conditions for chatter stability prediction in high speed machining operations. Precision Engineering, 42 . pp. 53-65. ISSN 0141-6359 (Print) 1873-2372 (Online)

Aslan, Deniz and Budak, Erhan (2015) Surface roughness and thermo-mechanical force modeling for grinding operations with regular and circumferentially grooved wheels. Journal of Materials Processing Technology, 223 . pp. 75-90. ISSN 0924-0136

Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2015) Analytical modeling of turn-milling process geometry, kinematics and mechanics. International Journal of Machine Tools and Manufacture, 91 . pp. 24-33. ISSN 0890-6955 (Print) 1879-2170 (Online)

Karagüzel, Umut and Olgun, Utku and Uysal, Emre and Budak, Erhan and Bakkal, M. (2015) Increasing tool life in machining of difficult-to-cut materials using nonconventional turning processes. International Journal of Advanced Manufacturing Technology, 77 (9-12). pp. 1993-2004. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Özkırımlı, Ömer Mehmet and Budak, Erhan (2015) Generalized cutting force model in multi-axis milling using a new engagement boundary determination approach. International Journal of Advanced Manufacturing Technology, 77 (1-4). pp. 341-355. ISSN 0268-3768 (Print) 1433-3015 (Online)

Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) In-process tool point FRF identification under operational conditions using inverse stability solution. International Journal of Machine Tools and Manufacture, 89 . pp. 64-73. ISSN 0890-6955 (Print) 1879-2170 (Online)

Altıntaş, Y. and Kersting, P. and Biermann, D. and Budak, Erhan and Denkena, B. and Lazoğlu, I. (2014) Virtual process systems for part machining operations. CIRP Annals - Manufacturing Technology, 63 (2). pp. 585-605. ISSN 0007-8506 (Print) 1726-0604 (Online)

Tunç, Lütfi Taner and Budak, Erhan (2013) Identification and modeling of process damping in milling. Journal of Manufacturing Science and Engineering, 135 (2). ISSN 1087-1357

Budak, Erhan and Çomak, Alptunç and Öztürk, Erdem (2013) Stability and high performance machining conditions in simultaneous milling. CIRP Annals - Manufacturing Technology, 62 (1). pp. 403-406. ISSN 0007-8506

Tunç, Lütfi Taner and Budak, Erhan (2012) Effect of cutting conditions and tool geometry on process damping in machining. International Journal of Machine Tools and Manufacture, 57 . pp. 10-19. ISSN 0890-6955

Budak, Erhan and Tunç, Lütfi Taner and Alan, Salih and Özgüven, H. Nevzat (2012) Prediction of workpiece dynamics and its effects on chatter stability in milling. CIRP Annals - Manufacturing Technology, 61 (1). pp. 339-342. ISSN 0007-8506

Öztürk, Erdem and Tunç, Lütfi Taner and Budak, Erhan (2011) Analytical methods for increased productivity in five-axis ball-end milling. International Journal of Mechatronics and Manufacturing Systems (IJMMS), 4 (3/4). pp. 238-265. ISSN 1753-1039 (print) ; 1753-1047 (online)

Özelkan, Ertunga C. and Öztürk, Özkan and Budak, Erhan (2011) Identifying parameters of a broaching design using non-linear optimisation. International Journal of Modelling, Identification and Control (IJMIC), 12 (3). pp. 244-252. ISSN 1746-6172 (print) , 1746-6180 (online)

Özkırımlı, Ömer M. and Budak, Erhan (2011) Process simulation for five-axis machining for generalised milling tools. International Journal of Design Engineering, 3 (3). pp. 232-246. ISSN 1751-5874 (Print) 1751-5882 (Online)

Budak, Erhan and Öztürk, E. (2011) Dynamics and stability of parallel turning operations. CIRP Annals - Manufacturing Technology, 60 (1). pp. 383-386. ISSN 0007-8506

Özlü, Emre and Molinari, Alain and Budak, Erhan (2010) Two-zone analytical contact model applied to orthogonal cutting. Machining Science and Technology, 14 (3). pp. 323-343. ISSN 1091-0344 (print) 1532-2483 (online)

Özşahin, Orkun and Özgüven, H. Nevzat and Budak, Erhan (2010) Analysis and compensation of mass loading effect of accelerometers on tool point FRF measurements for chatter stability predictions. International Journal of Machine Tools and Manufacture, 50 (6). pp. 585-589. ISSN 0890-6955

Alan, Salih and Budak, Erhan and Özgüven, H. Nevzat (2010) Analytical prediction of part dynamics for machining stability analysis. International Journal of Automation Technology, 4 (3). pp. 259-267. ISSN 1881-7629 (Print) 1883-8022 (Online)

Öztürk, Erdem and Budak, Erhan (2010) Dynamics and stability of five-axis ball-end milling. Transactions of the ASME Journal of Manufacturing Science and Engineering, 132 (2). ISSN 1087-1357

Budak, Erhan and Tunç, Lütfi Taner (2010) Identification and modeling of process damping in turning and milling using a new approach. CIRP Annals - Manufacturing Technology, 59 (1). pp. 403-408. ISSN 0007-8506

Öztürk, Erdem and Tunç, Taner L. and Budak, Erhan (2009) Investigation of lead and tilt angle effects in 5-axis ball-end milling processes. International Journal of Machine Tools and Manufacture, 49 (14). pp. 1053-1062. ISSN 0890-6955

Budak, Erhan and Tunç, Taner L. (2009) A new method for identification and modeling of process damping in machining. Journal of Manufacturing Science and Engineering - Transactions of ASME, 131 (5). ISSN 1087-1357

Özlü, Emre and Budak, Erhan and Molinari, A. (2009) Analytical and experimental investigation of rake contact and friction behavior in metal cutting. International Journal of Machine Tools and Manufacture, 49 (11). pp. 865-875. ISSN 0890-6955

Tunç, Taner L. and Budak, Erhan (2009) Extraction of 5-axis milling conditions from CAM data for process simulation. International Journal of Advanced Manufacturing Technology, 43 (5-6). pp. 538-550. ISSN 0268-3768 (Print) 1433-3015 (Online)

Özşahin, Orkun and Ertürk, Alper and Özgüven, H. Nevzat and Budak, Erhan (2009) A closed-form approach for identification of dynamical contact parameters in spindle-holder-tool assemblies. International Journal of Machine Tools and Manufacture, 49 (1). pp. 25-35. ISSN 0890-6955

Kayhan, Mehmet and Budak, Erhan (2009) An experimental investigation of chatter effects on tool life. Proceedings of the Institution of Mechanical Engineers. Part B; Journal of Engineering Manufacture, 223 (11). pp. 1455-1463. ISSN 0954-4054 (Print) 2041-2975 (Online)

Budak, Erhan and Öztürk, Erdem and Tunç, Taner L. (2009) Modeling and simulation of 5-axis milling processes. CIRP Annals - Manufacturing Technology, 58 (1). pp. 347-350. ISSN 0007-8506

Budak, Erhan and Özlü, Emre (2008) Development of a thermomechanical cutting process model for machining process simulations. CIRP Annals - Manufacturing Technology, 57 (1). pp. 97-100. ISSN 0007-8506

Çimren, Emrah and Çatay, Bülent and Budak, Erhan (2007) Development of a machine tool selection system using AHP. The International Journal of Advanced Manufacturing Technology, 35 (3-4). pp. 363-376. ISSN 0268-3768

Özlü, Emre and Budak, Erhan (2007) Analytical modeling of chatter stability in turning and boring operations - part I: model development. Journal of Manufacturing Science and Engineering, 129 (4). pp. 726-732. ISSN 1087-1357

Özlü, Emre and Budak, Erhan (2007) Analytical modeling of chatter stability in turning and boring operations - Part II: Experimental verification. Journal of manufacturing science and engineering, 129 (4). pp. 733-739. ISSN 1087-1357

Öztürk, Erdem and Budak, Erhan (2007) Modeling of 5-axis milling processes. Machining science and technology, 11 (3). pp. 287-311. ISSN 1091-0344 print / 1532-2483 online

Ertürk, Alper and Budak, Erhan and Özgüven, H. Nevzat (2007) Selection of design and operational parameters in spindle-holder-tool assemblies for maximum chatter stability by using a new analytical model. International journal of machine tools & manufacture, 47 (9). pp. 1401-1409. ISSN 0890-6955

Ertürk, A. and Özgüven, H. N. and Budak, Erhan (2007) Effect analysis of bearing and interface dynamics on tool point FRF for chatter stability in machine tools by using a new analytical model for spindle-tool assemblies. International journal of machine tools & manufacture, 47 (1). pp. 23-32. ISSN 0890-6955

Ertürk, A. and Özgüven, H. N. and Budak, Erhan (2006) Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF. International Journal of Machine Tools and Manufacture, 46 (15). pp. 1901-1912. ISSN 0890-6955 (Print) 1879-2170 (Online)

Budak, Erhan (2006) Analytical models for high performance milling. Part I: cutting forces, structural deformations and tolerance integrity. International Journal of Machine Tools and Manufacture, 46 (12-13). pp. 1478-1488. ISSN 0890-6955 (Print) 1879-2170 (Online)

Budak, Erhan (2006) Analytical models for high performance milling. Part II: process dynamics and stability. International Journal of Machine Tools and Manufacture, 46 (12-13). pp. 1489-1499. ISSN 0890-6955 (Print) 1879-2170 (Online)

Budak, Erhan and Ertürk, A. and Özgüven, H. N. (2006) A Modeling approach for analysis and improvement of spindle-holder-tool assembly dynamics. CIRP Annals - Manufacturing Technology, 55 (1). pp. 369-372. ISSN 0007-8506

Ertürk, Alper and Özgüven, H. Nevzat and Budak, Erhan (2006) İşleme merkezlerinin dinamik analizi ve süreçte kararlılık: yeni bir analitik modelin uygulamaları. Makina Tasarım ve İmalat Dergisi, 8 (2). pp. 55-66. ISSN 1302-9487

Tekeli, Alper and Budak, Erhan (2005) Maximization of chatter-free material removal rate in end milling using analytical methods. Machining science and technology, 9 (2). pp. 147-167. ISSN 1091-0344 print / 1532-2483 online

Budak, Erhan and Lazoğlu, İsmail and Güzel, Birhan U. (2004) Improving cycle time in sculptured surface machining through force modeling. CIRP Annals - Manufacturing Technology, 53 (1). pp. 103-106. ISSN 0007-8506

Kıvanç, Evren Burcu and Budak, Erhan (2004) Structural modeling of end mills for form error and stability analysis. International Journal of Machine Tools and Manufacture, 44 (11). pp. 1151-1161. ISSN 0890-6955

Arslan, M. Çağdaş and Çatay, Bülent and Budak, Erhan (2004) A decision support system for machine selection. Journal of Manufacturing Technology Management, 15 (1). pp. 101-109. ISSN 1741-038X

Budak, Erhan (2003) An analytical design method for milling cutters with nonconstant pitch to increase stability, part 1: Theory. Journal of manufacturing science and engineering, 125 (1). pp. 29-34. ISSN 1087-1357

Budak, Erhan (2003) An analytical design method for milling cutters with nonconstant pitch to increase stability, part 2: Application. Journal of manufacturing science and engineering, 125 (1). pp. 35-38. ISSN 1087-1357

Nemes, J. A. and Asamoah-Attiah, S. and Budak, Erhan (2001) Cutting load capacity of end mills with complex geometry. CIRP Annals - Manufacturing Technology, 50 (1). pp. 65-68. ISSN 0007-8506

Wiercigroch, Marian and Budak, Erhan (2001) Sources of nonlinearities, chatter generation and suppression in metal cutting. Philosophical transactions of the Royal Society of London series A - Mathematical physical and engineering sciences, 359 (1781). pp. 663-693. ISSN 1364-503X (print) 1471-2962 (online)

Papers in Conference Proceedings

Ebrahimi Araghizad, Arash and Tehranizadeh, Faraz and Kılıç, Kemal and Budak, Erhan (2023) Smart tool-related faults monitoring system using process simulation-based machine learning algorithms. In: XXXIV CIRP Sponsored Conference, Karpacz, Poland

Tehranizadeh, Faraz and Budak, Erhan (2022) Special milling tools to suppress self-excited chatter vibrations in milling. In: 17th IFAC Workshop on Time Delay Systems, TDS 2022, Montreal, Canada

Hatipoğlu, Ersen and Bakkal, Mustafa and Budak, Erhan (2022) On the finite element modeling best practices for the metal cutting simulations. In: 19th International Conference on Machine Design and Production (UMTIK), Cappadocia, Turkey

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan (2021) Dalgalı talaş yüzeyli takımların kararlılık analizi ve takım optimizasyonu [Stability analysis of crest-cut end mills and the optimization of tool geometry]. In: 11th International Congress on Machining (UTIS), Virtual

Yıldız, Saltuk and Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yavaş, Çağlar and Kurt, Seçil and Budak, Erhan (2021) Evaluation of carbide end mills with different cutting geometries in machining of a titanium alloy. In: 11th International Congress on Machining (UTIS), Virtual

Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan (2021) Gantry optimization of a 5-axis cnc machine tool considering dynamic modes. In: 11th International Congress on Machining (UTIS), Virtual

Rahimzadeh Berenji, Kaveh and Ozsahin, Orkun and Budak, Erhan (2021) Effect of spindle design on spindle dynamics and chatter stability. In: International Symposium on Precision Engineering and Sustainable Manufacturing PRESM2021, Jeju, South Korea

Karataş, Gamze and Özsahin, Orkun and Ozguven, Nevzat and Budak, Erhan (2021) Design optimization of tool holder extension for enhanced chatter stability by using component mode tuning method. In: 9th CIRP Conference on High Performance Cutting, Sheffield, UK

Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan (2020) Design and analysis of a 5-axis gantry CNC machine tool. In: 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), Thessaloniki, Greece

Özşahin, Orkun and Ritou, Mathieu and Budak, Erhan and Rabréau, Clément and Le Loch, Sebastien (2019) Identification of spindle dynamics by receptance coupling for non-contact excitation system. In: 17th CIRP Conference on Modelling of Machining Operations, Sheffield, UK

Yüksel, Esra and Budak, Erhan and Ertürk, Ahmet (2019) Machine tool design optimization considering thermo-mechanical behaviour in the structure and at the interfaces. In: 8th International Conference on Virtual Machining Process Technology (VMPT 2019), Vancouver, Canada

Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan (2018) An experimental study on surface errors in orthogonal turn-milling process. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Barzegar Osgouei, Zahra and Özlü, Emre and Altan, Erhan and Budak, Erhan (2018) Heat modeling for third deformation zone. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Jamshidi, Hamid and Budak, Erhan (2018) Grinding temperature modeling based on a time dependent heat source. In: 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary

Rahimzadeh Berenji, Kaveh and Kara, Mehmet Emre and Budak, Erhan (2018) Investigating high productivity conditions for turn-milling in comparison to conventional turning. In: 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2017) Development of turn-milling machine tool program parameters based on basic cutting geometry. In: 8th International Symposium on Machining, Antalya, Turkey

Barzegar Osgouei, Zahra and Budak, Erhan and Özlü, Emre (2017) Modeling of tool temperature in orthogonal cutting. In: 8th International Symposium on Machining, Antalya, Turkey

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2017) Mechanical and thermal modeling of orthogonal turn-milling operation. In: 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Cluny, France

Tehranizadeh, Faraz and Budak, Erhan (2017) Design of serrated end mills for improved productivity. In: 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Cluny, France

Mohammadi, Yaser and Tunç, Taner L. and Budak, Erhan (2017) Investigation of process damping effect for multi-mode milling systems. In: 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Cluny, France

Yüksel, Esra and Budak, Erhan and Ertürk, Ahmet S. (2017) The effect of linear guide representation for topology optimization of a five-axis milling machine. In: 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO), Cluny, France

Yaqoob, Muhammad Hassan and Budak, Erhan (2017) An alternative methodology for machine tool error determination through workpiece measurement. In: 6th International Conference on Virtual Machining Process Technology (VMPT), Montreal, Canada

Jamshidi, Hamid and Yastıkcı, Batuhan and Gürtan, Mert and Budak, Erhan (2017) Grinding force model for Inconel 718 with CBN and conventional wheels. In: 6th International Conference on Virtual Machining Process Technology (VMPT), Montreal, Canada

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2016) Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi. In: 7. Uluslararası Talaşlı İmalat Sempozyumu (UTİS 2016), Istanbul

Yastıkcı, Batuhan and Jamshidi, Hamid and Budak, Erhan (2016) Experimental investigation of wear mechanisms with electroplated CBN wheel. In: 19th International Symposium on Advances in Abrasive Technology, Stockholm, Sweden

Budak, Erhan (2016) Improving productivity in machining processes through modeling. In: 3. Wiener Produktionstechnik Kongress 2016 Adaptive & Smart Manufacturing, Vienna, Austria

Azvar, Milad and Budak, Erhan (2016) Multi-dimensional modelling of chatter stability in parallel turning operation. In: 17th International Conference on Machine Design and Production, Bursa, Turkey

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2016) Modeling and measurement of cutting temperatures in milling. In: 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnitz, Germany

Yılmaz, E. E. and Budak, Erhan and Özgüven, H. Nevzat (2016) Modeling and measurement of micro end mill dynamics using inverse stability approach. In: 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnizt, Germany

Bakioğlu, Hayri and Özlü, Emre and Budak, Erhan (2015) Dik kesme modelinde üçüncü deformasyon bölgesi kuvvetlerinin termomekanik modellenmesi. In: 6. Ulusal Talaşlı İmalat Sempozyumu, Istanbul

Özşahin, Orkun and Budak, Erhan and Özgüven, Nevzat H. (2015) Frezeleme esnasındaki tezgâh dinamiğinin belirlenmesi ve modellenmesi. In: 6. Ulusal Talaşlı İmalat Sempozyumu, Istanbul

Hatipoğlu, Ersen and Budak, Erhan and Bakkal, Mustafa (2015) Mikro frezeleme işleminde yüzey oluşumunun modellenmesi. In: 6. Ulusal Talaşlı İmalat Sempozyumu, Istanbul

Yalçın, Turgut Köksal and Erberdi, Muharrem and Özlü, Emre and Budak, Erhan (2015) Yüksek hızlı iş millerinin termal modellemesi. In: 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul

Putz, M. and Ihlenfeldt, S. and Karagüzel, U. and Semmler, U. and Budak, Erhan and Bakkal, Mustafa and Wertheim, R. (2015) Improving performance of turn-milling by controlling forces and thermally induced tool-center point (TCP) displacement. In: 13th Global Conference on Sustainable Manufacturing: Decoupling Growth from Resource Use, Binh Duong, Vietnam

Bilgen, Samet and Özlü, Emre and Erberdi, Muharrem S. and Budak, Erhan (2015) An experimental study of CNC machine tool feed drive limits and cycle time prediction for a 3-axis milling operation. In: 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Aydın, Kuşadası, Türkiye

Hatipoğlu, Ersen and Budak, Erhan and Bakkal, Mustafa (2015) Experimental investigation of tool wear in micro milling. In: 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Aydın, Kuşadası, Türkiye

Albayrak, Mehmet and Yalçın, Turgut Köksal and Erberdi, Muharrem and Özlü, Emre and Budak, Erhan (2015) Static and dynamic analysis of different machine tool spindles. In: 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Aydın, Kuşadası, Türkiye

Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa (2015) Cutting temperature and tool wear in turn-milling. In: 4th International Conference on Virtual Machining Process Technology, Vancouver, Canada

Çelebi, Ceren and Özlü, Emre and Budak, Erhan (2015) Experimental and analytical investigation of third deformation zone in orthogonal cutting. In: 4th International Conference on Virtual Machining Process Technology, Vancouver, Canada

Bakioğlu, Hayri and Özlü, Emre and Budak, Erhan (2015) Thermo-mechanical modeling of cutting forces in micro endmilling operations. In: 4th International Conference on Virtual Machining Process Technology, Vancouver, Canada

Aslan, Deniz and Kocaefe, Mert and Budak, Erhan (2014) Çevresel kanallı taşlar ile satıh taşlama operasyonunun modellenmesi (Modeling of surface grinding operation with circumferentially grooved wheels). In: 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye

Uysal, Emre and Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa (2014) Dik frezeyle tornalama işleminde eksenler arası ofsetin etkisi ve takım ömrü (Tool life and the effect of axis offset in orthogonal turn-milling). In: 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye

Hatipoğlu, Ersen and Budak, Erhan (2014) Mikro frezeleme işleminde kesme parametrelerinin yüzey ve talaş oluşumuna etkisinin deneysel olarak incelenmesi (Experimental investigation of cutting parameters effect on surface generation and burr formation in micro milling). In: 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye

Baytok, Esma and Özlü, Emre and Budak, Erhan (2014) Titanyum ve alaşımlarının yüksek performanslı işlenmesi (High performance machining of titanium and its alloys). In: 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye

Uysal, Emre and Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa (2014) Investigating eccentricity effects in turn-milling operations. In: 6th CIRP International Conference on High Performance Cutting (HPC2014), Berkeley

Aslan, Deniz and Budak, Erhan (2014) Semi-analytical force model for grinding operations. In: 6th CIRP International Conference on High Performance Cutting (HPC2014), Berkeley

Yiğit, Ufuk and Ciğeroğlu, Ender and Budak, Erhan (2014) Chatter reduction in turning by using piezoelectric shunt circuits. In: IMAC-XXXI Conference and Exposition on Structural Dynamics, Orange County, California

Karagüzel, Umut and Olgun, Utku and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2014) High performance turning of high temperature alloys on multi-tasking machine tools. In: 4th Machining Innovations Conference, Hannover

Yasa, E. and Orhangül, A. and Songüler, S. C. and Platin, S. and Baytok, E. and Özlü, E. and Tunç, T. and Budak, Erhan (2013) Assessment of machinability performance in 5-axis milling of inconel 718 alloy with different carbide grades. In: 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Turkey

Çakır, Esin and Karagüzel, Umut and Olgun, Utku and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2013) Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Baytok, Esma and Tuna, Başak and Toprak, Ayhan and Özlü, Emre and Budak, Erhan (2013) Freze ve delik delme işlemlerinde kullanılan karbür takımların sistematik olarak performans karşılaştırması (Performance comparison of milling and drilling carbide tools). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Olgun, Utku and Budak, Erhan (2013) Machining of difficult-to-cut-alloys using rotary turning tools. In: 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, Italy

Çelebi, Ceren and Özlü, E. and Budak, Erhan (2013) Modeling and experimental investigation of edge hone and flank contact effects in metal cutting. In: 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, Italy

Çomak, A. and Koca, R. and Özkırımlı, Ö. M. and Budak, Erhan (2013) Modeling and simulation based design of variable pitch and variable helix milling tools for increased chatter stability. In: 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Turkey

Koca, Recep and Budak, Erhan (2013) Optimization of serrated end mills for reduced cutting energy and higher stability. In: 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, Italy

Nizamoğulları, A. and Çomak, Alptunç and Budak, Erhan (2013) Paralel tornalama işlevini gerçekleştiren CNC torna tezgahının tasarımı, kesici uç ömrü ve kesme kararlılığı incelemeleri (Cutting tool life, cutting stability and process time review on designed and manufactured CNC turning machine which performs the parallel turning function). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Aslan, Deniz and Budak, Erhan (2013) Satıh taşlama operasyonunda kuvvet ve sıcaklık modellemesi (Force and temperature modeling for surface grinding operation). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Çomak, Alptunç and Koca, Recep and Özlü, Emre and Özşahin, Orkun and Öztürk, Erdem and Tunç, Taner and Uysal, Emre and Budak, Erhan and Özgüven, H. Nevzat (2013) Talaşlı imalat süreçlerinin kararlılığı ve takım tezgah dinamiği (Machining process stability and machine tool dynamics). In: 16. Ulusal Makina Teorisi Sempozyumu (UMTS 2013), Erzurum, Turkey

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2012) Process modeling of turn-milling using analytical approach. In: 3rd CIRP Conference on Process Machine Interactions (PMI), Nagoya, Japan

Çomak, Alptunç and Budak, Erhan (2012) Eşzamanlı frezeleme operasyonlarının dinamiği ve kararlılığı. In: 3. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2012), Ankara, Türkiye

Budak, Erhan (2012) Suppression of chatter vibrations in simultaneous machining operations. In: 15th International Machine Tool Engineers' Conference (IMEC), Tokyo, Japan

Budak, Erhan (2012) Improving 5-axis milling operations using process models. In: 9th International Conference on Machine Tools, Automation, Technology and Robotics (MATAR 2012), Prag, Czech Republic

Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2012) Analytical modeling of the machine tool spindle dynamics under operational conditions. In: 37th International MATADOR Conference, Manchester, UK

Çomak, Alptunç and Budak, Erhan (2012) Chatter stability of parallel milling operations. In: 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Pamukkale, Denizli, Turkey

Özlü, Emre and Tunç, Lütfi Taner and Güven, İpek and Budak, Erhan (2012) Industrial applications of science integrated machining approach. In: 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Pamukkale, Denizli, Turkey

Çakır, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2012) Modeling of temperature distribution in orthogonal cutting with dual-zone contact at rake face. In: 1st International Conference on Virtual Machining Process Technology (VMPT), Montreal, Canada

Tunç, Lütfi Taner and Budak, Erhan (2011) Effect of cutting conditions and tool geometry on process damping in machining. In: 4th International Conference on Manufacturing Engineering (ICMEN2011), Thessaloniki, Greece

Özkırımlı, Ömer M. and Tunç, Taner L. and Budak, Erhan (2011) Simulation of multi-axis machining processes using z-mapping technique. In: 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, Turkey

Özşahin, Orkun and Budak, Erhan and Özgüven, Nevzat H. (2011) Investigating dynamics of machine tool spindles under operational conditions. In: 13th CIRP Modeling of Machining Operations, Sintra, Portugal

Aran, Volkan and Budak, Erhan (2011) An experimental study on dynamics and stability of miniature end mills. In: 13th CIRP Conference on Modelling of Machining Operations, Sintra, Portugal

Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Öztürk, Erdem and Murtezaoğlu, Yavuz and Budak, Erhan (2010) Machining strategy development in 5-axis milling operations using process models. In: 4th CIRP International Conference on High Performance Cutting (HPC 2010), Gifu, Japan

Öztürk, Erdem and Budak, Erhan (2010) Modeling dynamics of parallel turning operations. In: 4th CIRP International Conference on High Performance Cutting (HPC 2010), Gifu, Japan

Akçay, Recep and Memiş, Emre K. and Özlü, Emre and Budak, Erhan (2010) Havacılık sanayinde süreç optimizasyonu için kararlılık diyagramlarının kullanımı. In: 2. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2010), Konya, Türkiye

Öztürk, Erdem and Budak, Erhan (2010) Tool orientation effects on the geometry of 5-axis ball-end milling. In: 36th International Matador Conference, Manchester, UK

Özkırımlı, Ömer Mehmet and Budak, Erhan (2010) Process simulation for 5-axis machining using generalized milling tool geometries. In: 14. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2010), Güzelyurt, North Cyprus

Akçay, Recep and Memiş, Emre K. and Özlü, Emre and Budak, Erhan (2010) Increasing productivity in high speed milling of airframe components using chatter stability diagrams. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

Öztürk, Erdem and Budak, Erhan (2010) Modeling dynamics of parallel milling processes in time-domain. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

Özlü, Emre and Engin, Şerafettin and Cook, Cristina and El-Wardany, Tahany and Budak, Erhan (2010) Simulation of broaching operations for tool design optimization. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

Öztürk, Erdem and Özkırımlı, Ömer Mehmet and Süren, Gökhan and Budak, Erhan and Aksu, B. (2009) Increasing productivity in die machining through process modelling. In: 5th International Conference and Exhibition on Design And Production of Machines And Dies/Molds, Kuşadası, Aydın, Türkiye

Özşahin, Orkun and Özgüven, H. Nevzat and Budak, Erhan (2009) Mass loading effect of accelerometers on tool point FRF and stability diagrams. In: 12th CIRP Conference on Modeling and Machining Operations, San Sebastion, Spain

Özlü, Emre and Budak, Erhan (2009) Process modeling of orthogonal cutting with hone radiused tools. In: 12th CIRP Conference on Modeling and Machining Operations, San Sebastion, Spain

Budak, Erhan and Tunç, Taner L. (2008) A new method for identification and modeling of process damping in machining. In: First International Conference on Process Machine Interactions, Hannover, Germany

Aksu, Burak and Özlü, Emre and Budak, Erhan (2008) Analysis and modeling of edge forces in orthogonal cutting. In: International Conference on Manufacturing Engineering, Kassandra, Greece

Budak, Erhan and Çatay, Bülent and Tekin, İbrahim and Yenigün, Hüsnü and Abbak, Mehmet and Drannikov, Sergey and Şimşek, Oya (2007) Design of an RFID-based manufacturing monitoring and analysis system. In: RFID Eurasia, Istanbul, Turkey

Budak, Erhan and Çatay, Bülent and Tekin, İbrahim and Yenigün, Hüsnü and Abbak, Mehmet and Drannikov, Sergey (2007) Microstrip patch antenna for RFID applications. In: RFID Eurasia, Istanbul

Budak, Erhan (2007) Machining stability and machine tool dynamics. In: 11th International Research/Expert Conference " Trends in the Development of the Machinery and Associated Technology", Hammamet, Tunisa

Öztürk, Erdem and Özlü, Emre and Budak, Erhan (2007) Modeling dynamics and stability of 5-axis milling processes. In: 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy

Tunc, Taner and Budak, Erhan (2007) Optimization of 5-Axis milling processes based on the process models with application to airfoil machining. In: 10th CIRP International Workshop on Modeling of Machining OPerations, Calabria, Italy

Özlü, Emre and Budak, Erhan and Molinari, Alain (2007) Thermomechanical modeling of orthogonal cutting including the effect of stick-slide regions on the rake face. In: 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy

Özlü, Emre and Budak, Erhan (2007) Experimental analysis and modeling of orthogonal cutting using material and friction models. In: 4th International Conference and Exhibition on Machines and Design and Production of Dies and Molds, Cesme, Izmir, Turkey

Özelkan, Ertunga and Öztürk, Özkan and Budak, Erhan (2007) Optimization of broaching design. In: 2007 Industrial Engineering Research Conference,

Özlü, Emre and Budak, Erhan (2006) Analytical stability models for turning and boring operations. In: 2nd International Conference on High Speed Cutting, Vancouver, Canada

Özlü, Emre and Budak, Erhan (2006) Analytical prediction of stability limit in turning operations. In: CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia

Tunç, L. Taner and Budak, Erhan and Öztürk, Erdinç (2006) Optimization of 5-axis milling processes using process models. In: 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia

Tunç, L. Taner and Budak, Erhan (2006) 5 eksen frezeleme süreçlerinin modelleme yoluyla benzetimi ve eniyilenmesi. In: TIMAK Conference, Balikesir, Turkey

Öztürk, Erdem and Budak, Erhan (2006) 5 eksen frezelemede kuvvet ve şekil hatalarının modellenmesi. In: TIMAK Conference, Balıkesir, Turkey

Özlü, Emre and Budak, Erhan (2006) Tornalama işlemlerinde süreç kararlılığının analitik olarak modellenmesi. In: TİMAK Kongresi, Istanbul, Turkey

Budak, Erhan and Tekeli, Erkin (2005) Maximizing chatter free material removal rate in milling through optimal selection of axial and radial depth of cut pairs. In: 55th General Assembly of CIRP, Antalya, Turkey

Öztürk, Erdem and Budak, Erhan (2005) Modeling of 5-axis forces. In: Proceedings of the 8th International Workshop on Modeling of Machining Operations, Chemnitz, Germany

Budak, Erhan (2004) High performance milling. In: Aerotrends 2004 Conference, Bilbao, Spain

Kayhan, Mehmet and Budak, Erhan (2004) Investigating effects of chatter vibrations on tool wear in turning. In: 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy

Köktürk, Utku and Budak, Erhan (2004) Optimization of broaching tool geometry. In: International Seminar on Intelligent Computation i, Sorrento, Italy

Çimren, Emrah and Çatay, Bülent and Budak, Erhan (2004) Development of a machine tool selection system using analytic hierarchy process. In: 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (CIRP ICME '04), Sorrento, Italy

Tekeli, Alper and Budak, Erhan (2004) Increasing chatter free material removal rate in die and mold machining. In: 7th International Symposium on Advances in Abrasive Technology, Bursa/Turkey

Working Paper / Technical Report

Ulusoy, Gündüz and Kılıç, Kemal and Özlü, Emre and Altekin, Fatma Tevhide and Çatay, Bülent and Budak, Erhan and Pasin, Merih and Karaata, Enver Selçuk and Varandi, Siamak (2017) Sanayide Dijitalleşme Stratejileri Çalıştayı - Taslak rapor. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Book Section / Chapter

Budak, Erhan (2018) Machining process improvement through process twins. In: Ni, Jun and Majstorovic, Vidosav D. and Djurdjanovic, Dragan, (eds.) Proceedings of 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Switzerland, pp. 164-179. ISBN 978-3-319-89562-8 (Print) 978-3-319-89563-5 (Online)

Budak, Erhan (2014) CIRP Encyclopedia of Production Engineering (Chapter on machines). In: Laperrière, Luc and Reinhart, Gunther, (eds.) CIRP Encyclopedia of Production Engineering. Springer, NY. ISBN 978-3-642-20616-0

Budak, Erhan (2009) Dynamic analysis and control. In: Cheng, Kai, (ed.) Machining Dynamics: Fundamentals, Applications and Practices. Springer Series in Advanced Manufacturing. Springer, London, England, pp. 21-84. ISBN 978-1-84628-368-0 (Online) 978-1-84628-367-3 (Print)

Budak, Erhan (2007) Machining Dynamics. In: Cheng, Kai, (ed.) Machining Dynamics. Springer, -. (Accepted)

Volumes Edited / Special Issues

Urbikain, Gorka and Olvera-Trejo, Daniel and Budak, Erhan and Wan, Min (2023) Special issue on machining systems and signal processing: advancing machining processes through algorithms, sensors and devices. [Volumes Edited / Special Issues]

Budak, Erhan (2018) Special issue: chatter stability of machining processes. [Volumes Edited / Special Issues]

Budak, Erhan (2015) Production methods for difficult-to-manufacture materials. [Volumes Edited / Special Issues] (Accepted)

This list was generated on Thu Mar 28 22:54:20 2024 +03.