A new method for identification and modeling of process damping in machining

Budak, Erhan and Tunç, Taner L. (2009) A new method for identification and modeling of process damping in machining. Journal of Manufacturing Science and Engineering - Transactions of ASME, 131 (5). ISSN 1087-1357

[thumbnail of PD_asme.pdf] PDF
Restricted to Registered users only

Download (1MB) | Request a copy


Although process damping has a strong effect on cutting dynamics and stability, it has been mostly ignored in chatter analysis as there is no practical model for estimation of the damping coefficient and very limited data is available. This is mainly because of the fact that complicated test set-ups were used in order to measure the damping force in the past. In this study, a practical identification and modeling method for the process damping is presented. In this approach, the process damping is identified directly from the chatter tests using experimental and analytical stability limits. Once the process damping coefficient is identified, it is related to the instantaneous indentation volume by a coefficient which can be used for different cutting conditions and tool geometries. In determination of the indentation coefficient, chatter test results, energy and tool indentation geometry analyses are used. The determined coefficients are then used for the stability limit and process damping prediction in different cases, and verified using time-domain simulations and experimental results. The presented method can be used to determine chatter-free cutting depths under the influence of process damping for increased productivity.
Item Type: Article
Uncontrolled Keywords: process damping; orthogonal cutting; low speed machining
Subjects: T Technology > TJ Mechanical engineering and machinery
Divisions: Faculty of Engineering and Natural Sciences
Depositing User: Erhan Budak
Date Deposited: 19 Nov 2009 10:05
Last Modified: 23 Jul 2019 16:38
URI: https://research.sabanciuniv.edu/id/eprint/12766

Actions (login required)

View Item
View Item