Items where Division is "Materials Science & Eng." and Year is 2017

Group by: Creators | Item Type | No Grouping
Number of items: 87.


Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan (2017) Mechanisms by which salt concentration moderates the dynamics of human serum transferrin. Journal of Physical Chemistry B, 121 (18). pp. 4778-4789. ISSN 1520-6106 (Print) 1520-5207 (Online)

Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan and Dedeoğlu, Burcu (2017) Computational approaches for deciphering the equilibrium and kinetic properties of iron transport proteins. Metallomics, 9 (11). pp. 1513-1533. ISSN 1756-5901 (Print) 1756-591X (Online)

Abdizadeh, Haleh and Tamer, Yusuf Talha and Acar, Ömer and Toprak, Erdal and Atılgan, Ali Rana and Atılgan, Canan (2017) Increased substrate affinity in the escherichia coli L28R dihydrofolate reductase mutant causes trimethoprim resistance. Physical Chemistry Chemical Physics, 19 (18). pp. 11416-11428. ISSN 1463-9076 (Print) 1463-9084 (Online)

Akbulut, Özge (2017) Çok fazlı sistemlerde hücre ayrıştırılması. Uludağ University Journal of The Faculty of Engineering, 22 (1). pp. 65-80. ISSN 2148-4147 (Print) 2148-4155 (Online)

Akçay, Namık and Algün, Gökhan and Kılıç, Neslihan Uzar and Shawuti, Shalima and Can, Musa Mutlu (2017) Europium dependent absorption properties of Zn1-(y+0.01)(Al-0.01,Eu (y) )O (y=0.00, 0.01, 0.03 and 0.05) thin films grown on the soda-lime glass substrates by spin coating. Journal of Materials Science: Materials in Electronics, 28 (5). pp. 4492-4497. ISSN 0957-4522 (Print) 1573-482X (Online)

Akhlaghi Baghoojari, Omid and Aytaş, Tunahan and Tatlı, Buse and Sezer, Dilek and Hodaei, Amin and Favier, Aurelie and Scrivener, Karen and Menceloğlu, Yusuf Z. and Akbulut, Özge (2017) Modified poly(carboxylate ether)-based superplasticizer for enhanced flowability of calcined clay-limestone-gypsum blended Portland cement. Cement and Concrete Research, 101 . pp. 114-122. ISSN 0008-8846 (Print) 1873-3948 (Online)

Akhlaghi Baghoojari, Omid and Menceloğlu, Yusuf Z. and Akbulut, Özge (2017) Poly(carboxylate ether)-based superplasticizer achieves workability retention in calcium aluminate cement. Scientific Reports, 7 . ISSN 2045-2322

Avaz, Merve Senem and Oğuz, Oğuzhan and Kurt, Hasan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2017) Soft segment length controls morphology of poly(ethylene oxide) based segmented poly(urethane-urea) copolymers in a binary solvent. Computational Materials Science, 138 . pp. 58-69. ISSN 0927-0256 (Print) 1879-0801 (Online)

Bakan, Feray and Kara, Göknur and Çokol Çakmak, Melike and Çokol, Murat and Denkbaş, Emir Baki (2017) Synthesis and characterization of amino acid-functionalized calcium phosphate nanoparticles for siRNA delivery. Colloids and Surfaces B: Biointerfaces, 158 . pp. 175-181. ISSN 0927-7765 (Print) 1873-4367 (Online) Published Online First

Bakan, Feray and Sezen, Meltem and Geçgin, Merve and Göncü, Yapıncak and Ay, Nuran (2017) Structural and chemical analysis of hydroxyapatite (HA)-Boron nitride (BN) nanocomposites sintered under different atmospheric conditions. (Accepted)

Bakhtiari, Rokhsareh and Ghobadi, Sajjad and Gullüoğlu, Esma N. and Işıkel Şanlı, Lale and Alkan Gürsel, Selmiye and Özden Yenigün, Elif (2017) Macroscopic assembly of flexible and strong green graphene fibres. RSC Advances, 7 (43). pp. 26735-26744. ISSN 2046-2069

Balkan, Alper and Armağan, Efe and Özaydın İnce, Gözde (2017) Synthesis of coaxial nanotubes of polyaniline and poly(hydroxyethyl methacrylate) by oxidative/initiated chemical vapor deposition. Beilstein Journal of Nanotechnology, 8 (1). pp. 872-882. ISSN 2190-4286

Bilge, Kaan and Yorulmaz, Yelda and Javanshour, Farzin and Ürkmez, Ayça and Yılmaz, Bengisu and Şimşek, Eren and Papila, Melih (2017) Synergistic role of in-situ crosslinkable electrospun nanofiber/epoxy nanocomposite interlayers for superior laminated composites. Composites Science and Technology, 151 . pp. 310-316. ISSN 0266-3538 (Print) 1879-1050 (Online)

Brown, David K. and Penkler, David L. and Amamuddy, Olivier Sheik and Ross, Caroline and Atılgan, Ali Rana and Atılgan, Canan and Bishop, Özlem Taştan (2017) MD-TASK: a software suite for analyzing molecular dynamics trajectories. Bioinformatics, 33 (17). pp. 2768-2771. ISSN 1367-4803 (Print) 1460-2059 (Online)

Daş, Elif and Alkan Gürsel, Selmiye and Işıkel Şanlı, Lale and Bayrakçeken Yurtcan, Ayşe (2017) Thermodynamically controlled Pt deposition over graphene nanoplatelets: effect of Pt loading on PEM fuel cell performance. International Journal of Hydrogen Energy, 42 (30). pp. 19246-19256. ISSN 0360-3199 (Print) 1879-3487 (Online)

Dursun, Sinan and Mensur-Alkoy, Ebru and Sabuncu, Abdulsamet and Berksoy-Yavuz, Ayşe and Gülgün, Mehmet Ali and Alkoy, Sedat (2017) Growth of NBT template particles through topochemical microcrystal conversion and their structural characterization. Journal of the American Ceramic Society, 100 (3). pp. 937-944. ISSN 0002-7820 (Print) 1551-2916 (Online)

Furuncuoğlu Özaltın, Tuğba and Aviyente, Viktorya and Atılgan, Canan and Demirel, Levent (2017) Multiscale modeling of poly(2-isopropyl-2-oxazoline) chains in aqueous solution. European Polymer Journal, 88 . pp. 594-604. ISSN 0014-3057 (Print) 1873-1945 (Online)

Ghobadi, Sajjad and Işıkel Şanlı, Lale and Bakhtiari, Rokhsareh and Alkan Gürsel, Selmiye (2017) Green composite papers via use of natural binders and graphene for PEM fuel cell electrodes. ACS Sustainable Chemistry and Engineering, 5 (9). pp. 8407-8415. ISSN 2168-0485

Ghorbani, Morteza and Sadaghiani, Abdolali Khalili and Yıldız, Mehmet and Koşar, Ali (2017) Experimental and numerical investigations on spray structure under the effect of cavitation phenomenon in a microchannel. Journal of Mechanical Science and Technology, 31 (1). pp. 235-247. ISSN 1738-494X (Print) 1976-3824 (Online)

Gohari-Bajestani, Zahra and Akhlaghi, Omid and Yürüm, Yuda and Yürüm, Alp (2017) Synthesis of anatase TiO2 with exposed (001) facets grown on N-doped reduced graphene oxide for enhanced hydrogen storage. International Journal of Hydrogen Energy, 42 (9). pp. 6096-6103. ISSN 0360-3199 (Print) 1879-3487 (Online)

Güven, Melek Naz and Akyol, Ece and Duman, Fatma Demir and Acar, Havva Yağcı and Karahan, Özlem and Avcı, Duygu (2017) Urea dimethacrylates functionalized with bisphosphonate/bisphosphonic acid for improved dental materials. Journal of Polymer Science, Part A: Polymer Chemistry, 55 (19). pp. 3195-3204. ISSN 0887-624X (Print) 1099-0518 (Online)

Işıkel Şanlı, Lale and Bayram, Vildan and Ghobadi, Sajjad and Düzen, Nilay and Alkan Gürsel, Selmiye (2017) Engineered catalyst layer design with graphene-carbon black hybrid supports for enhanced platinum utilization in PEM fuel cell. International Journal of Hydrogen Energy, 42 (2). pp. 1085-1092. ISSN 0360-3199 (Print) 1879-3487 (Online)

Işıkel Şanlı, Lale and Yarar, Begüm and Bayram, Vildan and Alkan Gürsel, Selmiye (2017) Electrosprayed catalyst layers based on graphene-carbon black hybrids for the next-generation fuel cell electrodes. Journal of Materials Science, 52 (4). pp. 2091-2102. ISSN 0022-2461 (Print) 1573-4803 (Online)

Jamalabadi, Mohammad Yaghoub Abdollahzadeh and DaqiqShirazi, Mohammadreza and Koşar, Ali and Shadloo, Mostafa Safdari (2017) Effect of injection angle, density ratio, and viscosity on droplet formation in a microfluidic T-junction. Theoretical and Applied Mechanics Letters . ISSN 2095-0349 Published Online First

Karimzadehkhouei, Mehrdad and Sezen, Meltem and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2017) Subcooled flow boiling heat transfer of gamma-Al2O3/water nanofluids in horizontal microtubes and the effect of surface characteristics and nanoparticle deposition. Applied Thermal Engineering, 127 . pp. 536-546. ISSN 1359-4311 (Print) 1873-5606 (Online)

Kefal, Adnan and Yıldız, Mehmet (2017) Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method. Sensors, 17 (12). ISSN 1424-8220

Khabbaz Abkenar, Sirous and Tufani, Ali and Özaydın İnce, Gözde and Kurt, Hasan and Turak, Ayşe and Ow-Yang, Cleva W. (2017) Transfer printing gold nanoparticle arrays by tuning the surface hydrophilicity of thermo-responsive poly n-isopropylacrylamide (pNIPAAm). Nanoscale, 9 (9). pp. 2969-2973. ISSN 2040-3364 (Print) 2040-3372 (Online)

Kocaman, Esat Selim and Akay, Erdem and Yılmaz, Çağatay and Türkmen, Halit Süleyman and Mısırlıoğlu, Burç and Suleman, Afzal and Yıldız, Mehmet (2017) Monitoring the damage state of fiber reinforced composites using an FBG network for failure prediction. Materials, 10 (1). ISSN 1996-1944

Kosir, Mateja and Ceh, Miran and Ow-Yang, Cleva W. and Gilmeau, Emmanuel and Bernik, Slavko (2017) Structural features and thermoelectric properties of Al-doped (ZnO)(5)In2O3 homologous phases. Journal of the American Ceramic Society, 100 (8). pp. 3712-3721. ISSN 0002-7820 (Print) 1551-2916 (Online)

Koutsoumpis, Stefanos and Raftopoulos, Konstantinos N. and Oğuz, Oğuzhan and Papadakis, Christine M. and Menceloğlu, Yusuf Z. and Pissis, Polycarpos (2017) Dynamic glass transition of the rigid amorphous fraction in polyurethane-urea/SiO2 nanocomposites. Soft Matter, 13 (26). pp. 4580-4590. ISSN 1744-683X (Print) 1744-6848 (Online)

Kural, Nurçin and Ünlü, Cüneyt and Grupce, Orhideja and Bakan, Feray and Sezen, Meltem (2017) Analysis of deterioration phenomena in a Koran by 19th century Ottoman calligrapher Mehmed Şevki. (Accepted)

Kurt, Hasan and Alpaslan, Ece and Yıldız, Burçin and Taralp, Alpay and Ow-Yang, Cleva W. (2017) Conformation-mediated Forster resonance energy transfer (FRET) in blue-emitting polyvinylpyrrolidone (PVP)-passivated zinc oxide (ZnO) nanoparticles. Journal of Colloid and Interface Science, 488 . pp. 348-355. ISSN 0021-9797 (Print) 1095-7103 (Online)

Laikhtman, Alex and Makrinich, Gennady and Sezen, Meltem and Yıldızhan, Melike Mercan and Martinez, Jose I. and Dinescu, Doru and Prodana, Mariana and Enachescu, Marius and Alonso, Julio A. and Zak, Alla (2017) Hydrogen chemical configuration and thermal stability in tungsten disulfide nanoparticles exposed to hydrogen plasma. Journal of Physical Chemistry C, 121 (21). pp. 11747-11756. ISSN 1932-7447

Lukic, Miodrag J. and Sezen, Meltem and Veljovic, Dorde and Mrakovic, Ana (2017) A facile route for hydroxyapatite densification with an increased heating rate. Materials Letters, 207 . pp. 12-15. ISSN 0167-577X (Print) 1873-4979 (Online)

Mehraeen, Shayan and Alkan Gürsel, Selmiye and Papila, Melih and Cebeci, Fevzi Çakmak (2017) Investigation of electrochemical actuation by polyaniline nanofibers. Smart Materials and Structures, 26 (9). ISSN 0964-1726 (Print) 1361-665X (Online)

Mısırlıoğlu, Burç and Alpay, S. P. (2017) Compositionally graded ferroelectrics as wide band gap semiconductors: Electrical domain structures and the origin of low dielectric loss. Acta Materialia, 122 . pp. 266-276. ISSN 1359-6454 (Print) 1873-2453 (Online)

Mohamadi, Mahboube and Garmabi, Hamid and Papila, Melih (2017) Conjugated dual-phase transitions in crystalline/crystalline blend of poly(vinylidene fluoride)/poly(ethylene oxide). Polymer Bulletin, 74 (6). pp. 2117-2135. ISSN 0170-0839 (Print) 1436-2449 (Online)

Nedaei, Masoumeh and Motezakker, Ahmad Reza and Zeybek, Mehmet Can and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali (2017) Subcooled flow boiling heat transfer enhancement using polyperfluorodecylacrylate (pPFDA) coated microtubes with different coating thicknesses. Experimental Thermal and Fluid Science, 86 . pp. 130-140. ISSN 0894-1777 (Print) 1879-2286 (Online)

Oğuz, Oğuzhan and Bilge, Kaan and Şimşek, Eren and Çıtak, Mehmet Kerem and Wis, Abdulmounem Alchekh and Özkoç, Güralp and Menceloğlu, Yusuf Z. (2017) High-performance green composites of poly(lactic acid) and waste cellulose fibers prepared by high-shear thermokinetic mixing. Industrial and Engineering Chemistry Research, 56 (30). pp. 8568-8579. ISSN 0888-5885

Oğuz, Oğuzhan and Koutsoumpis, Stefanos A. and Şimşek, Eren and Yılgör, Emel and Yılgör, İskender and Pissis, Polycarpos and Menceloğlu, Yusuf Z. (2017) Effect of soft segment molecular weight on the glass transition, crystallinity, molecular mobility and segmental dynamics of poly(ethylene oxide) based poly(urethane-urea) copolymers. RSC Advances, 7 (65). pp. 40745-40754. ISSN 2046-2069 (Print) 2046-2069 (Online)

Oğuz, Oğuzhan and Şimşek, Eren and Bilge, Kaan and Menceloğlu, Yusuf Z. (2017) Low density polypropylene/waste cellulose fiber composites by high-shear thermo-kinetic mixer. International Polymer Processing, 32 (5). pp. 562-567. ISSN 0930-777X

Özden-Yenigün, Elif and Atılgan, Canan and Elliott, James A. (2017) Multi-scale modelling of carbon nanotube reinforced crosslinked interfaces. Computational Materials Science, 129 . pp. 279-289. ISSN 0927-0256 (Print) 1879-0801 (Online)

Özden-Yenigün, Elif and Bilge, Kaan and Sünbüloğlu, Emin and Bozdağ, Ergün and Papila, Melih (2017) High strain rate response of nanofiber interlayered structural composites. Composite Structures, 168 . pp. 47-55. ISSN 0263-8223 (Print) 1879-1085 (Online)

Penkler, David and Şensoy, Özge and Atılgan, Canan and Tastan Bishop, Özlem (2017) Perturbation-response scanning reveals key residues for allosteric control in Hsp70. Journal of Chemical Information and Modeling, 57 (6). pp. 1359-1374. ISSN 1549-9596 (Print) 1549-960X (Online)

Rahmat, Amin and Koç, Bahattin and Yıldız, Mehmet (2017) A systematic study on numerical simulation of electrified jet printing. Additive Manufacturing . ISSN 2214-7810 (Print) 2214-8604 (Online) Published Online First

Saner Okan, Burcu (2017) Fabrication of multilayer graphene oxide reinforced high density polyethylene nanocomposites with enhanced thermal and mechanical properties via thermokinetic mixing. Turkish Journal of Chemistry, 41 (3). pp. 381-390. ISSN 1300-0527 (Print) 1303-6130 (Online)

Sardari Ghojehbeiglou, Behzad and Özcan, Meriç (2017) Real-time and tunable substrate for surface enhanced Raman spectroscopy by synthesis of copper oxide nanoparticles via electrolysis. Scientific Reports, 7 . ISSN 2045-2322

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Yılmaz, Çağatay and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2017) Monitoring the interface and bulk self-healing capability of tri-axial electrospun fibers in glass fiber reinforced epoxy composites. Composites Part A: Applied Science and Manufacturing, 99 . pp. 221-232. ISSN 1359-835X (Print) 1878-5840 (Online)

Sezen, Meltem and Bakan, Feray (2017) Odaklanış iyon demeti (FIB) kesitlemesi ile diş dokularına ait içyapıların mikro/nano-analizi. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi (SAÜFenBilDer), 21 (2). pp. 232-235. ISSN 1301-4048 (Print) 2147-835X (Online)

Sezen, Meltem and Bakan, Feray (2017) The use of focused electron and ion beams for the functionalization and nanostructuring of polymer surfaces. International Journal of Management and Applied Science (IJMAS), 5 (2). pp. 14-18. ISSN 2394-7926

Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2017) Design optimization of thin-walled composite structures based on material and fiber orientation. Composite Structures, 176 . pp. 1081-1095. ISSN 0263-8223 (Print) 1879-1085 (Online)

Şensoy, Özge and Atılgan, Ali Rana and Atılgan, Canan (2017) FbpA iron storage and release are governed by periplasmic microenvironments. Physical Chemistry Chemical Physics, 19 (8). pp. 6064-6075. ISSN 1463-9076 (Print) 1463-9084 (Online)

Taş, Cüneyt Erdinç and Hendessi, Saman and Baysal, Mustafa and Ünal, Serkan and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Ünal, Hayriye (2017) Halloysite nanotubes/polyethylene nanocomposites for active food packaging materials with ethylene scavenging and gas barrier properties. Food and Bioprocess Technology, 10 (4). pp. 789-798. ISSN 1935-5130 (Print) 1935-5149 (Online)

Tufani, Ali and Özaydın İnce, Gözde (2017) Smart membranes with pH-responsive control of macromolecule permeability. Journal of Membrane Science, 537 . pp. 255-262. ISSN 0376-7388 (Print) 1873-3123 (Online)

Ullah, Mohib and Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Siddiq, M. and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2017) Manufacturing functionalized mono-crystalline diamond containing electrospun fibers reinforced epoxy composites with improved mechanical characteristics. Diamond and Related Materials, 76 . pp. 90-96. ISSN 0925-9635 (Print) 1879-0062 (Online)

Yaman, Bilge and Mandal, Hasan (2017) Friction and wear behavior of spark plasma-sintered cBN-added Al2O3-PSZ-based composites. Journal of the Australian Ceramic Society, 53 (1). pp. 163-172. ISSN 0004-881X

Yarar Kaplan, Begüm and Işıkel Şanlı, Lale and Alkan Gürsel, Selmiye (2017) Flexible carbon–cellulose fiber-based composite gas diffusion layer for polymer electrolyte membrane fuel cells. Journal of Materials Science, 52 (9). pp. 4968-4976. ISSN 0022-2461 (Print) 1573-4803 (Online)

Yılmaz, Çağatay and Yıldız, Mehmet (2017) A study on correlating reduction in Poisson's ratio with transverse crack and delamination through acoustic emission signals. Polymer Testing, 63 . pp. 47-53. ISSN 0142-9418 (Print) 1873-2348 (Online)

Yürüm, Alp and Karakaş, Gürkan (2017) Synthesis of Na-, Fe-, and Co-promoted TiO2/multiwalled carbon nanotube composites and their use as a photocatalyst. Turkish Journal of Chemistry, 41 . pp. 440-454. ISSN 1300-0527 (Print) 1303-6130 (Online)

Papers in Conference Proceedings

Bakkaloğlu, Çiğdem and Noberi, Cansu and Kaya, Cengiz and Kaya, Figen (2017) Synthesize and characterization of aligned TiO2 nanotubes coated onto ITO glasses. In: International Materials Technologies and Metallurgy Conference (MTM 2017), Istanbul, Turkey

Ceh, Miran and Sturm, Saso and Jancar, Bostjan and Recnik, Aleksander and Daneu, Nina and Drazic, Goran and Jeric, Marja and Kosir, Mateja and Presecnik, Matej and Bernik, Slavko and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali and De Boor, Johannes (2017) HRTEM and HRSTEM investigations of oxide thermoelectric materials. In: 13th Multinational Congress on Microscopy, Rovinj, Croatia

Erkoç İlter, Selda and Sharabati, Jalal and Saffarimiandoab, Farzin and Güçlü, Serkan and İmer, Derya Yüksel and Koyuncu, İsmail and Ünal, Serkan and Menceloğlu, Yusuf Z. (2017) High performance polyamide thin film composite (PA-TFC) desalination membranes modified by zwitterionic silanes. In: 254th National Meeting and Exposition of the American-Chemical-Society (ACS) on Chemistry's Impact on the Global Economy, Washington, DC

Janipour, Mohsen and Mısırlıoğlu, Burç and Şendur, Kürşat (2017) Voltage control of surface plasmon and phonon interactions in doped semiconductor-dielectric interfaces. In: Physics and Simulation of Optoelectronic Devices XXV, San Francisco; United States

Kefal, Adnan and Yıldız, Mehmet and Öterkuş, E. (2017) Structural health monitoring of a wing-shaped sandwich panel using iFEM-RZT methodology. In: 3rd Turkey-Japan Workshop (TJW) on Polymeric Composite Materials, Kyoto, Japan

Nedaei, Masoumeh and Saadi, Nawzat and Karabacak, Tansel and Koşar, Ali (2017) Nucleate boiling heat transfer investigation using micro and nanostructured plates. In: 3rd World Congress on Mechanical, Chemical, and Material Engineering (MCM'17), Rome, Italy

Özcan, Mücahid and Noberi, Cansu and Bakkaloğlu, Çiğdem and Kaya, Cengiz and Kaya, Figen (2017) Synthesis and characterization of titanium dioxide nanostructures. In: International Materials Technologies and Metallurgy Conference (MTM 2017), Istanbul, Turkey

Sardari Ghojehbeiglou, Behzad and Özcan, Meriç (2017) A semi-colloidal substrate for surface enhanced Raman scattering. In: Conference on Colloidal Nanoparticles for Biomedical Applications XII, San Francisco, CA

Tofighi, Nima and Yıldız, Mehmet and Suleman, Afzal (2017) Numerical simulation of the sedimentation of an elliptic particle under external electric field using ISPH. In: 5th International Conference on Particle-Based Methods - Fundamentals and Applications (PARTICLES 2017), Hannover, Germany

Yurduşen, Aysu and Yürüm, Yuda (2017) Arsenic, cadmium, nickel and lead adsorption mechanism, kinetics and thermodynamics of copper based and iron based metal organic framework. In: 253rd American Chemical Society National Meeting: Advanced Materials, Technologies, Systems & Processes, Innovative Materials & Technologies for Sustainable Water Purification Symposium, San Fransisco, U.S.A.

Yurduşen, Aysu and Yürüm, Yuda (2017) Effect of different synthesis methods and strategies on the properties of copper based and iron based metal organic frameworks. In: 253rd American Chemical Society National Meeting: Advanced Materials, Technologies, Systems & Processes, Chemistry of Materials: Metal Organic Frameworks Symposium, San Fransisco, U.S.A.

Working Paper / Technical Report

Sadeghi, Sahl and Elitaş, Meltem (2017) A simple, bubble-free cell loading technique for culturing mammalian cells on lab-on-a-chip devices. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Book Section / Chapter

Ünal, Hayriye (2017) Antibiofilm coatings. In: Tiwari, Atul, (ed.) Handbook of Antimicrobial Coatings. Elsevier, US. (Accepted)


Abdizadeh, Haleh (2017) Modeling and simulation of processes regulating protein binding in various environments. [Thesis]

Abdolhosseinzadeh, Sina (2017) Bandgap modulation of graphene oxide and its application in the photocatalytic deposition of metallic nanoparticles. [Thesis]

Akalın, Çağdaş (2017) Peridynamic modelling of deformation field on isotropic medium. [Thesis]

Akhlaghi Baghoojari, Omid (2017) Rheological investigation of colloidal systems. [Thesis]

Avaz, Merve Senem (2017) Experimental and theoretical approaches in macromolecules design, synthesis, modification and nanosensor applications. [Thesis]

Bakhtiari, Rokhsareh (2017) Macroscopic assembly of flexible and strong graphene fibers. [Thesis]

Bilge, Kaan (2017) Sub-phase design for electrospun nanofibrous interlayer toughening in hierarchical composites. [Thesis]

Durmuş Sayar, Ayşe (2017) Synthesis and characterization of branched, functional polyurethane dispersions as a technology platform for self-crosslinking textile coatings. [Thesis]

Goharibajestani, Zahra (2017) Decoration of graphene sheets by metal oxide particle: synthesis, characterization, and application in hydrogen storage. [Thesis]

Jamil, Muhammad Faisal (2017) Synthesis of platinum nanoparticles on graphene via electrophoretic deposition as catalyst for PEMFC. [Thesis]

Javanshour, Farzin (2017) Nanofibrous and laminated nanocomposites: manufacturing and characterization. [Thesis]

Mohammad Moradi, Omid (2017) Combined effect of strontium content and electrode type on electrical properties of BaxSr1-xTiO3 thin-films. [Thesis]

Oğuz, Oğuzhan (2017) Structure-property behavior of poly(ethylene oxide) based poly(urethane-urea) copolymers and their nanocomposites reinforced by silica nanoparticles. [Thesis]

Shakoorioskooie, Mahdieh (2017) Carbon nanofiber supported Pt nanoparticles with an accurate size control through copolymer stabilization and chemical reduction for PEM fuel cell application. [Thesis]

Yarar Kaplan, Begüm (2017) Gas diffusion electrodes based on carbon and graphene for pem fuel cell. [Thesis]

This list was generated on Fri Feb 23 15:34:38 2024 +03.