Subject: TA401-492 Materials of engineering and construction. Mechanics of materials

Number of items at this level: 109.


Akhlaghi Baghoojari, Omid and Menceloğlu, Yusuf Z. and Akbulut, Özge (2017) Poly(carboxylate ether)-based superplasticizer achieves workability retention in calcium aluminate cement. Scientific Reports, 7 . ISSN 2045-2322

Dursun, Sinan and Mensur-Alkoy, Ebru and Sabuncu, Abdulsamet and Berksoy-Yavuz, Ayşe and Gülgün, Mehmet Ali and Alkoy, Sedat (2017) Growth of NBT template particles through topochemical microcrystal conversion and their structural characterization. Journal of the American Ceramic Society, 100 (3). pp. 937-944. ISSN 0002-7820 (Print) 1551-2916 (Online)

Ghobadi, Sajjad and Işıkel Şanlı, Lale and Bakhtiari, Rokhsareh and Alkan Gürsel, Selmiye (2017) Green composite papers via use of natural binders and graphene for PEM fuel cell electrodes. ACS Sustainable Chemistry and Engineering, 5 (9). pp. 8407-8415. ISSN 2168-0485

Khani, Navid and Nadernezhad, Ali and Bartolo, Paulo and Koç, Bahattin (2017) Hierarchical and spatial modeling and bio-additive manufacturing of multi-material constructs. CIRP Annals - Manufacturing Technology, 66 (1). pp. 229-232. ISSN 0007-8506 (Print) 1726-0604 (Online)

Laikhtman, Alex and Makrinich, Gennady and Sezen, Meltem and Yıldızhan, Melike Mercan and Martinez, Jose I. and Dinescu, Doru and Prodana, Mariana and Enachescu, Marius and Alonso, Julio A. and Zak, Alla (2017) Hydrogen chemical configuration and thermal stability in tungsten disulfide nanoparticles exposed to hydrogen plasma. Journal of Physical Chemistry C, 121 (21). pp. 11747-11756. ISSN 1932-7447

Mehraeen, Shayan and Alkan Gürsel, Selmiye and Papila, Melih and Cebeci, Fevzi Çakmak (2017) Investigation of electrochemical actuation by polyaniline nanofibers. Smart Materials and Structures, 26 (9). ISSN 0964-1726 (Print) 1361-665X (Online)

Özden-Yenigün, Elif and Bilge, Kaan and Sünbüloğlu, Emin and Bozdağ, Ergün and Papila, Melih (2017) High strain rate response of nanofiber interlayered structural composites. Composite Structures, 168 . pp. 47-55. ISSN 0263-8223 (Print) 1879-1085 (Online)

Saner Okan, Burcu (2017) Fabrication of multilayer graphene oxide reinforced high density polyethylene nanocomposites with enhanced thermal and mechanical properties via thermokinetic mixing. Turkish Journal of Chemistry, 41 (3). pp. 381-390. ISSN 1300-0527 (Print) 1303-6130 (Online)

Yaman, Bilge and Mandal, Hasan (2017) Friction and wear behavior of spark plasma-sintered cBN-added Al2O3-PSZ-based composites. Journal of the Australian Ceramic Society, 53 (1). pp. 163-172. ISSN 0004-881X


Avcı, Gökay and Akhlaghi Baghoojari, Omid and Üstbaş, Burçin and Özbay, Ceren and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) A PCE-based rheology modifier allows machining of solid cast green bodies of alumina. Ceramics International, 42 (3). pp. 3757-3761. ISSN 0272-8842 (Print) 1873-3956 (Online)

Carlier, Aurelli and Akdeniz Skvortsov, Gözde and Hafezi, Forough and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin and Oosterwyck, Hans Van (2016) Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering. Biofabrication, 8 (2). ISSN 1758-5082 (Print) 1758-5090 (Online)

Güven, Zekiye Pelin and Üstbaş, Burçin and Harkness, Kellen M. and Coşkun, Hikmet and Joshi, Chakra P. and Besong, Tabot M. D. and Stellacci, Francesco and Bakr, Osman M. and Akbulut, Özge (2016) Synthesis and characterization of mixed ligand chiral nanoclusters. Dalton Transactions, 45 (28). pp. 11297-11300. ISSN 1477-9226 (Print) 1477-9234 (Online)

Kılıç, Deniz and Üstbaş, Burçin and Budak, Ece Polen and Eyisoylu, Hande and Yılmaz, Cem and Eldem, Barkin and Akbulut, Özge (2016) Silicone-based composites as surgical breast models for oncoplasty training. In: Humanitarian Technology: Science, Systems and Global Impact (HumTech2016), Boston, United States

Özler, Saime Burçe and Bakırcı, Ezgi and Küçükgül, Can and Koç, Bahattin (2016) Three-dimensional direct cell bioprinting for tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials . ISSN 1552-4973 (Print) 1552-4981 (Online) Published Online First http://dx.doi.org/10.1002/jbm.b.33768

Popilevsky , L. and Skripnyuk, V. M. and Beregovsky, M. and Sezen, Meltem and Amouyal, Y. and Rabkin, E. (2016) Hydrogen storage and thermal transport properties of pelletized porous Mg-2 wt.% multiwall carbon nanotubes and Mg-2 wt.% graphite composites. International Journal of Hydrogen Energy, 41 (32). pp. 14461-14474. ISSN 0360-3199 (Print) 1879-3487 (Online)

Sadighikia, Sina (2016) 3D electron microscopy investigations of human dentin and ion beam irradiation effect on biocompatible anatase TiO2 using focused ion beam based techniques. [Thesis]

Saner Okan, Burcu and Marset Castro, Azucena and Seyyed Monfared Zanjani, Jamal and Akkuş Sut, Pınar and Şen, Özlem and Çulha, Mustafa and Menceloğlu, Yusuf Z. (2016) Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l-lactide-co-ε-caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation. Journal of Applied Polymer Science, 133 (22). ISSN 0021-8995 (Print) 1097-4628 (Online)

Ürk, Deniz and Demir, Elif and Bulut, Osman and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Öveçoğlu, Lütfi and Cebeci, Hülya (2016) Understanding the polymer type and CNT orientation effect on the dynamic mechanical properties of high volume fraction CNT polymer nanocomposites. Composite Structures, 155 . pp. 255-262. ISSN 0263-8223 (Print) 1879-1085 (Online)


Akkaş, Tuğçe (2015) Novel methods to prepared cross-linked enzyme aggregates (CLEA) challenging immobilization models-urease and pepsin. [Thesis]

Ghobadi, Sajjad (2015) Development of rGO/PANI/PVA-based electrospun nanocomposites. [Thesis]


Cebeci, Fevzi Çakmak and Schmidt, Daniel J. and Hammond, Paula T. (2014) Multilayer transfer printing of electroactive thin film composites. ACS Applied Materials & Interfaces, 6 (22). pp. 20519-20523. ISSN 1944-8244 (Print) 1944-8252 (Online)

Demircan, Özgür and Kosui, Tatsuya and Ashibe, Shinsuke and Nakai, Asami (2014) Effect of surface treatment and twisting on tensile and bending properties of aramid unidirectional composites. Composite Interfaces (SI), 21 (4). pp. 287-299. ISSN 0927-6440 (Print) 1568-5543 (Online)

Demircan, Özgür and Yılmaz, C. and Kocaman, E. S. and Akay, E. and Yıldız, Mehmet (2014) Tensile and bending properties of biaxial warp knitted textile composites. In: 1st Joint Turkey-Japan Workshop (JTJW) on Polymeric Composite Materials, Istanbul, Turkey

Demiryürek, Rıdvan (2014) Surface modification of stimuli responsive polymers by wrinkling method: surface morphology and bacterial adsorption studies. [Thesis]

Deniz, Ataman (2014) The investigation of interfaces of multiaxis fiber reinforced composites by fiber bragg grating sensors. [Thesis]

Güven, Zekiye Pelin (2014) Synthesis and characterization of chiral mixed ligand nanoclusters and nacre-structure. [Thesis]

Khodabakhsh, Mohammadreza (2014) Effect of ionic radius of a-site dopants on the phase transition temperature and crystal structure of bismuth ferrite/ Mohammadreza Khodabakhsh; thesis advisor İbrahim Burç Mısırlıoğlu. [Thesis]

Okyay Öner, Firuze (2014) Preparation and characterization of modified polyether ether ketone (PEEK-WC) membranes for polymer assisted ultrafiltration of Cu2+ IONS from water. [Thesis]

Shalima, Shawuti (2014) Ionic conduction mechanisms in nano-composite electrolyte and their relationship to micro-structural features. [Thesis]

Ünal, Dilay (2014) CFD investigation of the effect of spinneret geometry on the flow behavior of multiphase polymeric fluids. [Thesis]


Alpaslan, Ece (2013) Deducing the role of functionalizing macromolecules in the nucleation of colloidal nanoparticles. [Thesis]

Aydın, Kinyas (2013) Self-crosslinkable superabsorbent hydrogels based on vinlalkoxysilanes as crosslinker. [Thesis]

Can, Musa Mutlu and Jaffari, G. Hassnain and Aksoy, Seda and Shah, S. Ismat and Fırat, Tezer (2013) Synthesis and characterization of ZnGa2O4 particles prepared by solid state reaction. Journal of Alloys and Compounds, 549 . pp. 303-307. ISSN 0925-8388

Heinz, Özge (2013) Polymer-filler interactions in polyether based thermoplastic polyureathane/silica nanocomposites. [Thesis]

Kocabaş Ataklı, Özlem Züleyha (2013) Fabrication of nano and porous materials & their utilization in the purification of water contaminated with arsenic, copper, and lead. [Thesis]

Örüm, Aslıhan (2013) Parameters effecting the rheology of particle filled polymeric suspensions. [Thesis]

Ülkümen, Erim (2013) Nano-perlite as an alternative reinforcing filler to silica in PDMS composites. [Thesis]


Mandal, Hasan and Komeya, Katsutoshi and Turan, Servet (2012) Special issue: SiAIONs and non-oxide ceramics preface. [Volumes Edited / Special Issues]

Abakay, Ayça (2012) Controlled synthesis and surface modification of titanium dioxide. [Thesis]

Baysal, Mustafa (2012) Coal bed methane potential and biogasification of soma lignite. [Thesis]

Bilge, Kaan (2012) Multi-scale nature of composite materials: three case studies. [Thesis]

Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2012) Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers. Composites Science and Technology, 72 (14). pp. 1639-1645. ISSN 0266-3538

Coşkun, Mustafa and Can, Musa Mutlu and Coşkun, Özlem Duyar and Korkmaz, Mustafa and Fırat, Tezer (2012) Surface anisotropy change of CoFe2O4 nanoparticles depending on thickness of coated SiO2 shell. Journal of Nanoparticle Research, 14 (10). ISSN 1388-0764 (Print) 1572-896X (Online)

İnceoğlu, Şebnem and Aytun, Taner and Menceloğlu, Yusuf Z. and Özen, İlhan and Acar, Metin H. (2012) Morphological similarity of a tri-block copolymer processed at ambient and elevated temperatures. Korea-Australia Rheology Journal, 24 (4). pp. 313-321. ISSN 1226-119X (Print) 2093-7660 (Online)

Karahan, Bahar Burcu (2012) Ionic polymer metal composites (IPMCs) based on radiation grafted polystyrenesulfonıc acid onto poly (ethylene- alttetrafluoroethylene) (ETFE-g-PSSA). [Thesis]

Khassaf, Hamidreza (2012) Synthesis and electrical characterization of bismuth ferrite thin films. [Thesis]

Mallik, Awadesh Kumar and Açıkbaş, Nurcan Çalış and Kara, Ferhat and Mandal, Hasan and Basu, Debabrata (2012) A comparative study of SiAlON ceramics. Ceramics International, 38 (7). pp. 5757-5767. ISSN 0272-8842

Şimşek, Eren (2012) Dual scale roughness driven perfectly hydrophobic surfaces prepared by electrospraying a polymer in good solvent-poor solvent systems. [Thesis]


Çöloğlu, Hale Nur (2011) Phase transitions into multidomain states in ferroelectric thin films with depletion charges and partial electrode screening. [Thesis]

Ercan, Batur and Taylor, Erik and Alpaslan, Ece and Webster, Thomas J. (2011) Diameter of titanium nanotubes influences anti-bacterial efficacy. Nanotechnology, 22 (29). ISSN 0957-4484

Ergün, Aslı (2011) Microwave assisted synthesis of MCM-41 type mesoporous materials and diffusion of organic vapors in porous media: MCM-41 and carbon nanotubes. [Thesis]

Eskin, Murat Gökhan (2011) The role of boron in phosphorescence persistence of rare-earth co-activated alkalai aluminates. [Thesis]

Glowacki, Eric Daniel and Leonat, Lucia and Voss, Gundula and Bodea, Marius-Aurel and Bozkurt, Zeynep and Ramil, Alberto Montaigne and Irimia-Vladu, Mihai and Bauer, Siegfried and Sarıçiftçi, Niyazi Serdar (2011) Ambipolar organic field effect transistors and inverters with the natural material Tyrian Purple. AIP Advances, 1 (4). ISSN 2158-3226

Glowacki, Eric Daniel and Leonat, Lucia and Voss, Gundula and Bodea, Marius and Bozkurt, Zeynep and Irimia-Vladu, Mihai and Bauer, Siegfried and Sarıçiftçi, Niyazi Serdar (2011) Natural and nature-inspired semiconductors for organic electronics. In: Conference on Organic Semiconductors in Sensors and Bioelectronics IV, San Diego, CA, USA

İnanç, İbrahim (2011) Predicting properties of proteins and polymers by coarse grained methods and using nanoprobes. [Thesis]

Khoda, A. K. M. and Özbolat, İbrahim T. and Koç, Bahattin (2011) A functionally gradient variational porosity architecture for hollowed scaffolds fabrication. Biofabrication (Special Issue), 3 (3). ISSN 1758-5082

Lisker, Marco and Marschmeyer, Steffen and Kaynak, Mehmet and Tekin, İbrahim (2011) A sub-atmospheric chemical vapor deposition process for deposition of oxide liner in high aspect ratio through silicon vias. Journal of Nanoscience and Nanotechnology , 11 (9). pp. 8061-8067. ISSN 1533-4880

Mallik, Awadesh Kumar and Reddy, K. Madhav and Açıkbaş, Nurcan Çalış and Kara, Ferhat and Mandal, Hasan and Basu, Debabrata and Basu, Bikramjit (2011) Influence of SiC addition on tribological properties of SiAlON. Ceramics International, 37 (7). pp. 2495-2504. ISSN 0272-8842

Öğüt, Erdem and Şendur, Kürşat (2011) Tuning the polarization states of optical spots at the nanoscale on the Poincar, sphere using a plasmonic nanoantenna. Applied Physics A - Materials Science & Processing, 103 (3). pp. 855-858. ISSN 0947-8396 (Print) 1432-0630 (Online)

Özdemir, Nazlı Gülsine (2011) An experimental study on the process monitoring of resin transfer molded composite structures using fiber optic sensors. [Thesis]

Özel, Burcu (2011) Polymer particle interactions in nanocolloids. [Thesis]

Saner Okan, Burcu (2011) An improved technique for the exfoliation of graphene nanosheets and utilization of their nanocomposites as fuel cell electrodes. [Thesis]

Sturm, Saso and Bencan, Andreja and Gülgün, Mehmet Ali and Malic, Barbara and Kosec, Marija (2011) Determining the stoichiometry of (K,Na)NbO(3) using optimized energy-dispersive x-ray spectroscopy and electron energy-loss spectroscopy analyses in a transmission electron microscope. Journal of the American Ceramic Society, 94 (8). pp. 2633-2639. ISSN 0002-7820

Şendur, Kürşat and Koşar, Ali and Mengüç, M. P. (2011) Localized radiative energy transfer from a plasmonic bow-tie nano-antenna to a magnetic thin film stack. Applied Physics A - Materials Science & Processing, 103 (3). pp. 703-707. ISSN 0947-8396 (Print) 1432-0630 (Online)

Taş, Sinem (2011) Production of carbon nanotubes using Fe-FSM-16, co-FSM-16 and Ni-FSM-16 type mesoporous catalytic materials by chemical vapor deposition. [Thesis]

Turgut, Deniz (2011) Network characterization of packing architecture for condensed matter systems. [Thesis]

Yang, Rong and Xu, Jingjing and Özaydın İnce, Gözde and Wong, Sze Yinn and Gleasont, Karen K. (2011) Surface-tethered zwitterionic ultrathin antifouling coatings on reverse osmosis membranes by initiated chemical vapor deposition. Chemistry of Materials, 23 (5). pp. 1263-1272. ISSN 0897-4756


Alkoy, Ebru Mensur and Papila, Melih (2010) Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics. Ceramics International, 36 (6). pp. 1921-1927. ISSN 0272-8842

Aytun, Taner (2010) Building lithium fluoride nanoparticle films for organic photovoltaics. [Thesis]

Özden, Elif and Menceloğlu, Yusuf Z. and Papila, Melih (2010) Engineering chemistry of electrospun nanofibers and interfaces in nanocomposites for superior mechanical properties. ACS Applied Materials & Interfaces, 2 (7). pp. 1788-1793. ISSN 1944-8244 (Print) 1944-8252 (Online)

Özen, İlhan and Menceloğlu, Yusuf Z. (2010) Barrier properties of polypropylene/poly (m-xylene adipamide) and polypropylene/poly (ethylene-co-vinyl alcohol) blend films. Journal of Plastic Film and Sheeting, 26 (4). pp. 377-394. ISSN 8756-0879

Qureshi, Anjum and Gürbüz, Yaşar and Howell, Mick and Kang, Weng P. and Davidson, Jımmy L. (2010) Nanocrystalline diamond film for biosensor applications. In: 20th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes and Nitrides, Athens, Greece

Qureshi, Anjum and Mergen, Ayhan and Singh, N. L. (2010) Swift heavy ion induced modifications in nano-crystalline microwave dielectric BaTi4O9 ceramics. Journal of Alloys and Compounds, 504 (2). pp. 407-412. ISSN 0925-8388

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpiççi, Hüsnü (2010) Effect of R600a on tribological behavior of sintered steel under starved lubrication. Tribology International (Sp. Iss. SI), 43 (5-6). pp. 1054-1058. ISSN 0301-679X

Zakharyuta, Anastasia (2010) Reagent-free covalent crosslinking of chitosan-gelatin films for medical applications. [Thesis]


Akşit, Mahmut Faruk and Kızıl, Hüseyin and Efeoğlu, İhsan and Sariibrahimoğlu, Kemal (2009) Wear performance of titanium and niobium added MOS2 coatings under isobutane exposure. In: ASME/STLE International Joint Tribology Conference (IJTC 2009), Memphis, Tennessee, USA

Altay, A. and Carter, C. B. and Arslan, I. and Gülgün, Mehmet Ali (2009) Crystallization of CaAl4O7 and CaAl12O19 powders. Philosophical Magazine, 89 (7). pp. 605-621. ISSN 1478-6435 (Print) 1478-6443 (Online)

Atabak, Mehrdad and Ünverdi, Özhan and Özer, H. Özgür and Oral, Ahmet (2009) Sub-Angstrom oscillation amplitude non-contact atomic force microscopy for lateral force gradient measurement. Applied Surface Science, 256 (5). pp. 1299-1303. ISSN 0169-4332

Birkan, Burak (2009) Polymer assisted fabrication of nanoparticles on electrospun nanofibers. [Thesis]

Dağdeviren, Canan (2009) Dielectric behavior characterization of functional fibrous-ceramic/polymer nanocomposites. [Thesis]

Dalgıçdir, Cahit (2009) Investigation of barrier properties of as cast and biaxially stretched pet/evoh and peti/evoh blend films. [Thesis]

Dongxing, Yang and Velamakanni, Aruna and Bozoklu, Gülay and Park, Sungjin and Stoller, Meryl and Piner, Richard D. and Stankovich, Sasha and Jung, Inhwa and Field, Daniel A. and Ventrice, Carl A., Jr. and Ruoff, Rodney S. (2009) Chemical analysis of graphene oxide films after heat and chemical treatments by X-ray photoelectron and Micro-Raman spectroscopy. Carbon, 47 (1). pp. 145-152. ISSN 0008-6223

Kaçar, Gökhan (2009) Multi-scale study of the dynamics of self-organizing molecular systems. [Thesis]

Menşur Alkoy, Ebru and Shiosakiy, Tadashi (2009) Investigation of the effect of cerium doping on the electrical properties and leakage current behavior of lead zirconate thin films derived by the sol-gel method. Journal of the American Ceramic Society, 92 (2). pp. 396-404. ISSN 0002-7820

Mülayim, Murat (2009) Optimal paths in residue networks identify communication pathways in proteins. [Thesis]

Okyay, Firuze (2009) Evolution of carbon structures in the pyrolysis of petroleum pitches. [Thesis]

Taşdemir, Zuhal (2009) Flexible ceramic-polymer composite substrates with spatially variable dielectrics for miniaturized RF applications. [Thesis]


Menceloğlu, Yusuf Z. (2008) Uluslararası rekabet stratejileri: nanoteknoloji ve Türkiye. Uluslararası Rekabet Stratejileri Dizisi; 11 . Yayın No. TÜSİAD-T/2008-11/474, (). TÜSİAD (Türk Sanayicileri ve İşadamları Derneği) / Sabancı Üniversitesi Rekabet Forumu, İstanbul. ISBN 978-9944-405-47-4

Atwani, Osman and Barıştıran, Canan and Erden, Ayça and Sönmez, Gürsel (2008) A stable, low band gap electroactive polymer: poly(4,7-dithien-2-yl-2,1,3-benzothiadiazole). Synthetic Metals, 158 (3-4). pp. 83-89. ISSN 0379-6779

Bozat, Özgür (2008) Decoherence and entanglement in single molecule magnets. [Thesis]

Bozoklu, Gülay (2008) Improvement in barrier properties of polymers used in packaging industry: pet/N-MXD6 blends. [Thesis]

Çilingir, Halime Didem (2008) "Equivalent" material properties for designing ionic polymer metal composite actuators by equivalent bimorph beam theory. [Thesis]

Dumanlı, Ahu Gümrah (2008) Effect of metal catalyst and tailoring the conditions for cnf/cnt growth through cvd. [Thesis]

Erden, Ayça (2008) Synthesis and optimization of carbon nanofiber templated polypyrrole. [Thesis]

Fırlar, Emre (2008) Examination of a micromechanics based failure criterion for non-crimp fiber reinforced composite laminates. [Thesis]

Günay, Anıl (2008) Development of a displacement sensor towards detecting quantum fluctuations in nanoelectromechanical systems. [Thesis]

Konyalı, Haluk (2008) Long time stress relaxation of unfilled and filled amorphous networks under uniaxial tension. [Thesis]

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Birol, Feriha S. (2008) A study on wear rates of 100Cr6 steel running against sintered steel surfaces under dry and starved lubrication. In: The 47th Annual Conference of Metallurgists, COM 2008, Winnipeg, Manitoba, Canada

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpicci, Hüsnü (2008) Tribological behavior of sintered steel under starved lubrication in R600A environment. In: 2nd International Conference on Advanced Tribology, iCAT 2008, Singapore

Uluç, Vanya Anna (2008) Synthesis and characterization of phosphorescent strontium aluminate compounds. [Thesis]

Yüksel, Seren (2008) Removal of boron from aqueous solutions by adsorption using natural adsorbents. [Thesis]


Sirer, Irmak (2006) Understanding protein dynamical transition and protein-water interaction from dielectric relaxation calculations. [Thesis]


Demir, Mustafa Muammer (2004) Solution processing: fabrication and characterization of polymeric nanocomposite films and polystyrene nanoparticles. [Thesis]


Demir, Mustafa Muammer (2001) Electrospinning and wet-spinning of elastic fibers. [Thesis]


Demircan, Özgür Initial and final fracture behaviors of woven fabric composites. Science and Engineering of Composite Materials . ISSN 0792-1233 (Print) 2191-0359 (Online) Published Online First http://dx.doi.org/10.1515/secm-2014-0178

Demircan, Özgür and Ashibe, Shinsuke and Kosui, Tatsuya and Nakai, Asami Effect of various knitting techniques on mechanical properties of biaxial weft-knitted thermoplastic composites. Journal of Thermoplastic Composite Materials . ISSN 0892-7057 (Print) 1530-7980 (Online) Published Online First http://dx.doi.org/10.1177/0892705713519121

Demircan, Özgür and Ashibe, Shinsuke and Kosui, Tatsuya and Nakai, Asami Effect of various loop lengths on mechanical properties of biaxial weft-knitted thermoplastic composites. Journal of Thermoplastic Composite Materials . ISSN 0892-7057 (Print) 1530-7980 (Online) Published Online First http://dx.doi.org/10.1177/0892705714526918

Demircan, Özgür and Ashibe, Shinsuke and Kosui, Tatsuya and Nakai, Asami Modeling of tensile and bending properties of biaxial weft knitted composites. Science and Engineering of Composite Materials . pp. 1-11. ISSN 0792-1233 (Print) 2191-0359 (Online) Published Online First http://dx.doi.org/10.1515/secm-2013-0274

Demircan, Özgür and Ashibe, Shinsuke and Kosui, Tatsuya and Nakai, Asami Tensile and bending properties of biaxial weft-knitted and cross-ply thermoplastic composites. Journal of Thermoplastic Composite Materials . ISSN 0892-7057 (Print) 1530-7980 (Online) Published Online First http://dx.doi.org/10.1177/0892705714530751

This list was generated on Tue Sep 19 04:09:27 2017 +03.