Items where Subject is "TA Engineering (General). Civil engineering (General)"

Group by: Creators | Item Type
Number of items at this level: 200.

Article

Abdolhosseinzadeh, Sina and Mousavi, Mirsajjad and Haghmoradi, Navid and Alkan Gürsel, Selmiye (2019) A continuous-flow photocatalytic reactor for the precisely controlled deposition of metallic nanoparticles. Journal of Visualized Experiments (JoVE), 146 . ISSN 1940-087X

Abdolhosseinzadeh, Sina and Sadighikia, Sina and Alkan Gürsel, Selmiye (2018) Scalable synthesis of sub-nanosized platinum-reduced graphene oxide composite by an ultraprecise photocatalytic method. ACS Sustainable Chemistry and Engineering, 6 (3). pp. 3773-3782. ISSN 2168-0485

Abdollahzadeh, Mohammadamin and Tabrizi, Isa Emami and Kefal, Adnan and Yıldız, Mehmet (2021) A combined experimental/numerical study on deformation sensing of sandwich structures through inverse analysis of pre-extrapolated strain measurements. Measurement: Journal of the International Measurement Confederation, 185 . ISSN 0263-2241 (Print) 1873-412X (Online)

Acatay, Kazım and Şimşek, Eren and Ow-Yang, Cleva W. and Menceloğlu, Yusuf Z. (2004) Tunable, Superhydrophobically Stable Polymeric Surfaces by Electrospinning. Angewandte Chemie, 43 (39). pp. 5210-5213. ISSN 0044-8249

Açık, Müge and Sönmez, Gürsel and Barıştıran, Canan (2005) Polypyrrole nano-networks and nano-arrays. Polymer Preprint American Chemical. Society, 46 (2). p. 781. ISSN 0032-3934

Akbulut, Özge (2017) Çok fazlı sistemlerde hücre ayrıştırılması. Uludağ University Journal of The Faculty of Engineering, 22 (1). pp. 65-80. ISSN 2148-4147 (Print) 2148-4155 (Online)

Akhlaghi Baghoojari, Omid and Akbulut, Özge and Menceloğlu, Yusuf Z. (2015) Extensional rheology and stability behavior of alumina suspensions in the presence of AMPS-modified polycarboxylate ether-based copolymers. Colloid and Polymer Science, 293 (10). pp. 2867-2876. ISSN 0303-402X (Print) 1435-1536 (Online)

Akhlaghi Baghoojari, Omid and Akbulut, Özge and Menceloğlu, Yusuf Z. (2015) Shear and extensional rheological characterization of poly(acrylonitrile)/halloysite nanocomposite solutions. European Polymer Journal, 73 . pp. 17-25. ISSN 0014-3057 (Print) 1873-1945 (Online)

Arıcı, Ece and Yarar Kaplan, Begüm and Mert, Ahmet Musap and Alkan Gürsel, Selmiye and Kınayyiğit, Şölen (2019) An effective electrocatalyst based on platinum nanoparticles supported with graphene nanoplatelets and carbon black hybrid for PEM fuel cells. International Journal of Hydrogen Energy, 44 (27). pp. 14175-14183. ISSN 0360-3199 (Print) 1879-3487 (Online)

Arslan, Mehmet Alper and Başağa, Hüveyda and Göktuna, Serkan İsmail (2005) Signaling pathways as drug targets in cancer. Advances in Molecular Medicine, supplement, 1 (2). pp. 69-74.

Azeemi, Rehman Yousuf and Erğun, Rıdvan and Taşdemir, Adnan and Alkan Gürsel, Selmiye and Yürüm, Alp (2019) A simple spray assisted method to fabricate high performance layered graphene/silicon hybrid anodes for lithium-ion batteries. International Journal of Hydrogen Energy, 44 (36). pp. 20267-20277. ISSN 0360-3199 (Print) 1879-3487 (Online)

Bilge, Kaan and Ürkmez, Ayça and Şimşek, Eren and Papila, Melih (2016) Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self-same nanocomposites. Journal of Applied Polymer Science, 133 (43). ISSN 0021-8995 (Print) 1097-4628 (Online)

Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih (2016) Sound-tracking of failure events in cross-ply composite laminates under tension. Composite Structures, 153 . pp. 421-427. ISSN 0263-8223 (Print) 1879-1085 (Online)

Bilge, Kaan and Yorulmaz, Yelda and Javanshour, Farzin and Ürkmez, Ayça and Yılmaz, Bengisu and Şimşek, Eren and Papila, Melih (2017) Synergistic role of in-situ crosslinkable electrospun nanofiber/epoxy nanocomposite interlayers for superior laminated composites. Composites Science and Technology, 151 . pp. 310-316. ISSN 0266-3538 (Print) 1879-1050 (Online)

Birbil, Ş. İlker and Frenk, J.B.G. and Gromicho, J.A.S. and Zhang, S. (2009) The role of robust optimization in single-leg airline revenue management. Management Science, 55 (1). pp. 148-163. ISSN 0025-1909

Bozkurt, Deniz and Şen, Ömer Lütfi (2013) Climate change impacts in the Euphrates-Tigris Basin based on different model and scenario simulations. Journal of Hydrology, 480 . pp. 149-161. ISSN 0022-1694

Budak, Erhan and Ertürk, A. and Özgüven, H. N. (2006) A Modeling approach for analysis and improvement of spindle-holder-tool assembly dynamics. CIRP Annals - Manufacturing Technology, 55 (1). pp. 369-372. ISSN 0007-8506

Budak, Hikmet and Kasap, Zeynep and Shearman, Robert C. and Dweikat, İsmail and Sezerman, Uğur and Mahmood, Abid (2006) Molecular characterization of cDNA encoding resistance gene-like sequences in Buchloe dactyloides. Molecular biotechnology, 34 (3). pp. 293-301. ISSN 1073-6085 (Print) 1559-0305 (Online)

Çilingir, Halime Didem and Papila, Melih (2010) "Equivalent" electromechanical coefficient for IPMC actuator design based on equivalent bimorph beam theory. Experimental Mechanics, 50 (8). pp. 1157-1168. ISSN 0014-4851

Dağdeviren, Canan and Papila, Melih (2010) Dielectric behavior characterization of a fibrous-ZnO/PVDF nanocomposite. Polymer Composites, 31 (6). pp. 1003-1010. ISSN 0272-8397

Daş, Elif and Alkan Gürsel, Selmiye and Işıkel Şanlı, Lale and Bayrakçeken Yurtcan, Ayşe (2016) Comparison of two different catalyst preparation methods for graphene nanoplatelets supported platinum catalysts. International Journal of Hydrogen Energy, 41 (23). pp. 9755-9761. ISSN 0360-3199 (Print) 1879-3487 (Online)

Demir, Mustafa Muammer and Gülgün, Mehmet Ali and Menceloğlu, Yusuf Z. and Erman, Burak and Abramchuk, Sergei S. and Makhaeva, Elena E. and Khokhlov, Alexei R. and Matveeva, Valentina G. and Sulman, Mikhail G. (2004) Palladium nanoparticles by electrospinning from poly(acrylonitrile-co-acrylic acid)-PdCl2 solutions. Relations between preparation conditions, particle size, and catalytic activity. Macromolecules, 37 (5). pp. 1787-1792. ISSN 0024-9297 (Print) 1520-5835 (Online)

Demiriz, Ayhan and Ertek, Gürdal and Atan, Tankut and Kula, Ufuk (2011) Re-mining item associations: methodology and a case study in apparel retailing. Decision Support Systems, 52 (1). pp. 284-293. ISSN 0167-9236

Elmas, Sinem and Şaş Çaycı, Hatice Sinem (2022) Thermally exfoliated graphene oxide (TEGO) reinforced fast-cure epoxy resin: cure behavior and flexural properties. Erciyes Üniversitesi Fen Bilimleri Enstitüsü Fen Bilimleri Dergisi, 38 (2). pp. 168-179. ISSN 1012-2354

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory. Composite Structures, 223 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Ghobadi, Sajjad and Mehraeen, Shayan and Bakhtiari, Rokhsareh and Shamloo, Bahar and Sadhu, Veera Bhadraiah and Papila, Melih and Cebeci, Fevzi Çakmak and Alkan Gürsel, Selmiye (2016) PVA/PANI/rGO ternary electrospun mats as metal-free anti-bacterial substrates. RSC Advances, 6 (95). pp. 92434-92442. ISSN 2046-2069 (Print) 2046-2069 (Online)

Ghorbani, Morteza and Alcan, Gökhan and Ünel, Mustafa and Gözüaçık, Devrim and Ekici, Sinan and Üvet, Hüseyin and Şabanoviç, Asif and Koşar, Ali (2016) Visualization of microscale cavitating flow regimes via particle shadow sizing imaging and vision based estimation of the cone angle. Experimental Thermal and Fluid Science, 78 . pp. 322-333. ISSN 0894-1777 (Print) 1879-2286 (Online) Published Online First http://dx.doi.org/10.1016/j.expthermflusci.2016.04.026

Güler, Enver and Sadeghi, Sahl and Alkan Gürsel, Selmiye (2018) Characterization and fuel cell performance of divinylbenzene crosslinked phosphoric acid doped membranes based on 4-vinylpyridine grafting onto poly(ethylene-co-tetrafluoroethylene) films. International Journal of Hydrogen Energy, 43 (16). pp. 8088-8099. ISSN 0360-3199 (Print) 1879-3487 (Online)

Hassannezhad, Kosar and Akyol, Yasemin and Dursun, Mehmet Can and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali (2022) Effect of metakaolin and lime on strength development of blended cement paste. Construction Materials, 2 (4). pp. 297-313. ISSN 2673-7108

Haşim, Kazım Ahmet and Kefal, Adnan and Madenci, Erdoğan (2019) Isogeometric plate element for unstiffened and blade stiffened laminates based on refined zigzag theory. Composite Structures, 222 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Hosseini, Seyed Ahmad (2013) A model-based approach and analysis for multi-period networks. Journal of Optimization Theory and Applications, 157 (2). pp. 486-512. ISSN 0022-3239 (Print) 1573-2878 (Online)

Hyder, Md Nasim and Lee, Seung Woo and Cebeci, Fevzi Çakmak and Schmidt, Daniel J. and Shao-Horn, Yang and Hammond, Paula T. (2011) Layer-by-layer assembled polyaniline nanofiber/multiwall carbon nanotube thin film electrodes for high-power and high-energy storage applications. Acs Nano, 5 (11). pp. 8552-8561. ISSN 1936-0851 (Print) 1936-086X (Online)

İzci, Türker and Koz, Mustafa and Koşar, Ali (2015) The effect of micro pin-fin shape on thermal and hydraulic performance of micro pin-fin heat sinks. Heat Transfer Engineering, 36 (17). pp. 1447-1457. ISSN 0145-7632 (Print) 1521-0537 (Online)

Karakaya, Nursel and Papila, Melih and Özkoç, Güralp (2020) Overmolded hybrid composites of polyamide-6 on continuous carbon and glass fiber/epoxy composites: 'an assessment of the interface'. Composites Part A: Applied Science and Manufacturing, 131 . ISSN 1359-835X (Print) 1878-5840 (Online)

Kavlak, Nursel and Ulusoy, Gündüz and Şerifoğlu, Funda and Birbil, İlker Şevket (2009) Client-contractor bargaining on net present value in project scheduling with limited resources. Naval Research Logistics, 56 (2). pp. 93-112. ISSN 0894-069X

Kefal, Adnan and Emami Tabrizi, Isa and Tansan, Murat and Kısa, Erdal and Yıldız, Mehmet (2021) An experimental implementation of inverse finite element method for real-time shape and strain sensing of composite and sandwich structures. Composite Structures, 258 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet and Tessler, Alexander (2021) A smoothed iFEM approach for efficient shape-sensing applications: numerical and experimental validation on composite structures. Mechanical Systems and Signal Processing, 152 . ISSN 0888-3270 (Print) 1096-1216 (Online)

Kefal, Adnan and Sohouli, Abdolrasoul and Öterkuş, Erkan and Yıldız, Mehmet and Suleman, Afzal (2019) Topology optimization of cracked structures using peridynamics. Continuum Mechanics and Thermodynamics (SI), 31 (6). pp. 1645-1672. ISSN 0935-1175 (Print) 1432-0959 (Online)

Keskinöz, Mehmet (2006) Iterative soft-minimum mean-square error equalization for digital nonlinear page-oriented memories. Applied Optics, 45 (28). pp. 7401-7409. ISSN 0003-6935 (print) ; 1539-4522 (online)

Kılıç, Kemal and Sproule, Beth and Türksen, I. Burhan and Naranjo, Claudio A. (2004) Pharmacokinetic applications of fuzzy structure identification and reasoning. Information Sciences, 162 . pp. 121-137. ISSN 0020-0255

Kılıç, Kemal and Uncu, Özge and Türkşen, I. Burhan (2007) Comparison of different strategies of utilizing fuzzy clustering in structure identification. Information Sciences, 177 (23). pp. 5153-5162. ISSN 0020-0255

Koohestani, Babak and Khodadadi Darban, Ahmad and Darezereshkia, Esmaeel and Mokhtari, Pozhhan and Yılmaz, Erol and Yılmaz, Elif (2018) The influence of sodium and sulfate ions on total solidification and encapsulation potential of iron-rich acid mine drainage in silica gel. Journal of Environmental Chemical Engineering, 6 (2). pp. 3520-3527. ISSN 2213-3437 (Print) 2213-2929 (Online)

Koohestani, Babak and Khodadadi Darban, Ahmad and Mokhtari, Pozhhan and Yılmaz, Erol and Darezereshki, Esmaeel (2019) Comparison of different natural fiber treatments: a literature review. International Journal of Environmental Science and Technology, 16 (1). pp. 629-642. ISSN 1735-1472 (Print) 1735-2630 (Online)

Koşar, Ali (2010) Effect of substrate thickness and material on heat transfer in microchannel heat sinks. International Journal of Thermal Sciences, 49 (4). pp. 635-642. ISSN 1290-0729

Koşar, Ali (2011) Exergo-economic analysis of micro pin fin heat sinks. International Journal of Energy Research, 35 (11). pp. 1004-1013. ISSN 0363-907X

Koşar, Ali (2010) Exergy analysis of second-generation micro heat sinks under single-phase and flow boiling conditions. International Journal of Exergy, 7 (2). pp. 147-163. ISSN 1742-8300

Koulouridis, Stavros and Kızıltaş, Güllü and Zhou, Yijun and Hansford, Derek J. and Volakis, John L. (2006) Polymer-ceramic composites for microwave applications: fabrication and performance assessment. IEEE transactions on microwave theory and techniques, 54 (12). pp. 4202-4208. ISSN 0018-9480

Kundakcıoğlu, Erhun Ömer and Ünlüyurt, Tonguç (2007) Bottom-up construction of minimum-cost and/or trees for sequential fault diagnosis. IEEE transactions on systems, man and cybernetics. Part A. Systems and humans, 37 (5). pp. 621-629. ISSN 1083-4427

Li, Mingyang and Kefal, Adnan and Cerik, Burak Can and Öterkuş, Erkan (2020) Dent damage identification in stiffened cylindrical structures using inverse finite element method. Ocean Engineering, 198 . ISSN 0029-8018

Massarwa, Eyass and Emami Tabrizi, Isa and Yıldız, Mehmet (2021) Mechanical behavior and failure of glass/carbon fiber hybrid composites: multiscale computational predictions validated by experiments. Composite Structures, 260 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Mehraeen, Shayan and Sadeghi, Sahl and Cebeci, Fevzi Çakmak and Papila, Melih and Alkan Gürsel, Selmiye (2018) Polyvinylidene fluoride grafted poly(styrene sulfonic acid) as ionic polymer-metal composite actuator. Sensors and Actuators A: Physical, 279 . pp. 157-167. ISSN 0924-4247

Menceloğlu, Yusuf Z. (2004) Molecular engineering and topographic tuning for superhydrophobic surfaces. Angewandte Chemie (International Edition), 43 (39). pp. 5210-5213. ISSN 1521-3773

Mensur Alkoy, Ebru and Dağdeviren, Canan and Papila, Melih (2009) Processing conditions and aging effect on the morphology of PZT electrospun nanofibers, and dielectric properties of the resulting 3–3 PZT/Polymer composite. Journal of the American Ceramic Society, 92 (11). pp. 2566-2570. ISSN 0002-7820

Mısırlıoğlu, Burç and Pintilie, Lucian and Alexe, Marin and Hesse, Dietrich (2009) Influence of long-range dipolar interactions on the phase stability and hysteresis shapes of ferroelectric and antiferroelectric multilayers. Journal of Materials Science, 44 (19). pp. 5354-5363. ISSN 0022-2461 (Print) 1573-4803 (Online)

Mohamadi, Mahboube and Garmabi, Hamid and Papila, Melih (2017) Conjugated dual-phase transitions in crystalline/crystalline blend of poly(vinylidene fluoride)/poly(ethylene oxide). Polymer Bulletin, 74 (6). pp. 2117-2135. ISSN 0170-0839 (Print) 1436-2449 (Online)

Mohamadi, Mahboube and Garmabi, Hamid and Papila, Melih (2016) Effect of miscibility state on crystallization behavior and polymorphism in crystalline/crystalline blends of poly(vinylidene fluoride)/poly(ethylene oxide). Macromolecular Research, 24 (8). pp. 698-709. ISSN 1598-5032 (Print) 2092-7673 (Online)

Nasef, Mohamed Mahmoud and Alkan Gürsel, Selmiye and Karabelli, Duygu and Güven, Olgun (2016) Radiation-grafted materials for energy conversion and energy storage applications. Progress in Polymer Science, 63 . pp. 1-41. ISSN 0079-6700 (Print) 1873-1619 (Online)

Nicoara, Adrian Ionut and Stoica, Alexandra Elena and Vrabec, Mirijam and Smuc Rogan, Nastja and Sturm, Saso and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali and Basaran Bundur, Zeynep and Ciuca, Ion and Vasile, Bogdan Stefan (2020) End-of-life materials used as supplementary cementitious materials in the concrete industry. Materials, 13 (8). ISSN 1996-1944

Öncel, Çınar and Yürüm, Yuda (2006) Carbon nanotube synthesis via the catalytic CVD method: a review on the effect of reaction parameters. Fullerenes, Nanotubes and Carbon Nanostructures, 14 (1). pp. 17-37. ISSN 1536-383X (paper) 1536-4046 (electronic)

Özcan, Meriç and Önal, Caner and Akatay, Ahmet Ata (2006) A compact, automated and long working distance optical tweezer system. Journal of Modern Optics, 53 (3). pp. 357-364. ISSN 0950-0340

Özdemir, Mehmed Rafet and Kaya, Alihan and Koşar, Ali (2011) Low mass quality flow boiling in microtubes at high mass fluxes. Journal of Thermal Science and Engineering Applications, 3 (4). ISSN 1948-5085 (print) ; 1948-5093 (electronic)

Özdemir, Mehmed Rafet and Koşar, Ali (2013) Thermally developing single-phase flows in microtubes. Journal of Heat Transfer, 135 (7). ISSN 0022-1481 (Print) 1528-8943 (Online)

Özdemir, Murat and Kefal, Adnan and Imachi, Michiya and Tanaka, Satoyuki and Öterkuş, Erkan (2020) Dynamic fracture analysis of functionally graded materials using ordinary state-based peridynamics. Composite Structures, 244 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Özden Yenigün, Elif and Menceloğlu, Yusuf Z. and Papila, Melih (2012) MWCNTs/P(St-co-GMA) composite nanofibers of engineered interface chemistry for epoxy matrix nanocomposites. ACS Applied Materials & Interfaces, 4 (2). pp. 777-784. ISSN 1944-8244 (Print) 1944-8252 (Online)

Özen, İstem and Gülgün, Mehmet Ali (2006) Residual stress relaxation and microstructure in ZnO thin films. Advances in Science and Technology, 45 . pp. 1316-1321. ISSN 1661-819x

Öztürk, Levent and Yazıcı, Mustafa Atilla and Yücel, Cemal and Torun, Ayfer and Çekiç, Cemal and Bağcı, Ahmet and Özkan, Hakan and Braun, Hans-Joachim and Sayers, Zehra and Çakmak, İsmail (2006) Concentration and localization of zinc during seed development and germination in wheat. Physiologia plantarum, 128 (1). pp. 144-152. ISSN 0031-9317

Papila, Melih (2018) Design of and with thin-ply non-crimp fabric as building blocks for composites. Science and Engineering of Composite Materials, 25 (3). pp. 501-516. ISSN 0792-1233 (Print) 2191-0359 (Online)

Papila, Melih and Sheplak, Mark and Cattafesta, Louis N. (2008) Optimization of clamped circular piezoelectric composite actuators. Sensors and Actuators A: Physical, 147 (1). pp. 310-323. ISSN 0924-4247

Rajabalizadeh Mojarrad, Naeimeh and Sadeghi, Sahl and Yarar Kaplan, Begüm and Güler, Enver and Alkan Gürsel, Selmiye (2020) Metal-salt enhanced grafting of vinylpyridine and vinylimidazole monomer combinations in radiation grafted membranes for high-temperature PEM fuel cells. ACS Applied Energy Materials, 3 (1). pp. 532-540. ISSN 2574-0962

Serdaroğlu, Ahmet and Ertüzün, Ayşın and Erçil, Aytül (2007) Defect detection in textile fabric images using subband domain subspace analysis. Pattern Recognition and Image Analysis, 17 (4). pp. 663-674. ISSN 1054-6618 (Print) 1555-6212 (Online)

Serdaroğlu, Ahmet and Ertüzün, Ayşın and Erçil, Aytül (2006) Defect detection in textile fabric images using wavelet transforms and independent component analysis. Pattern Recognition and Image Analysis, 16 (1). pp. 61-64. ISSN 1555-6212

Seyyed Monfared Zanjani, Jamal and Yousefi Louyeh, Pouya and Emami Tabrizi, Isa and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2021) Thermo-responsive and shape-morphing CF/GF composite skin: full-field experimental measurement, theoretical prediction, and finite element analysis. Thin-Walled Structures, 160 . ISSN 0263-8231 (Print) 1879-3223 (Online)

Shojaeian, Mostafa and Koşar, Ali (2014) Convective heat transfer and entropy generation analysis on Newtonian and non-Newtonian fluid flows between parallel-plates under slip boundary conditions. International Journal of Heat and Mass Transfer, 70 (3). pp. 664-673. ISSN 0017-9310 (Print) 1879-2189 (Online)

Sönmez, Gürsel and Bülbül Sönmez, Hayal and Shen, C.K.F. Wudl (2005) Completion of additive primary colors in polymeric electrochromics. Polymer Preprint American Chemical Society, 46 (2). p. 856. ISSN 0032-3934

Şener, Sait and Ünel, Mustafa (2006) Geometric invariant curve and surface normalization. Image analysis and recognition (Lecture Notes In Computer Science), 4142 . pp. 445-456. ISSN 0302-9743 (Print) 1611-3349 (Online)

Şener, Sait and Ünel, Mustafa (2006) ICA based normalization of 3D objects. Multimedia content representation, classification and security (Lecture notes in computer science), 4105 . pp. 330-337. ISSN 0302-9743 (Print) 1611-3349 (Online)

Şeşen, Muhsincan and Demir, Ebru and İzci, Türker and Khudhayer, Wisam and Karabacak, Tansel and Koşar, Ali (2013) Submerged jet impingement cooling using nanostructured plates. International Journal of Heat and Mass Transfer, 59 . pp. 414-422. ISSN 0017-9310

Tabak, Ahmet Fatih and Yeşilyurt, Serhat (2008) Simulation-based analysis of flow due to traveling-plane-wave deformations on elastic thin-film actuators in micropumps. Microfluidics and Nanofluidics, 4 (6). pp. 489-500. ISSN 1613-4990

Ülengin, Füsun and Cekyay, Bora and Işık, Mine and Özaydın, Özay and Kabak, Özgür and Toktas-Palut, Peral and Onsel Ekici, Şule and Topçu, Y. İlker (2021) A simulation-based approach for improving the largest border crossing between Europe and Turkey. Transport Policy, 114 . pp. 350-363. ISSN 0967-070X (Print) 1879-310X (Online)

Yarar Kaplan, Begüm and Haghmoradi, Navid and Biçer, Emre and Merino, Cesar and Alkan Gürsel, Selmiye (2018) High performance electrocatalysts supported on graphene based hybrids for polymer electrolyte membrane fuel cells. International Journal of Hydrogen Energy, 43 (52). pp. 23221-23230. ISSN 0360-3199 (Print) 1879-3487 (Online)

Papers in Conference Proceedings

Abut, Hüseyin and Erdoğan, Hakan and Erçil, Aytül and Çürüklü, Ali Baran and Koman, Hakkı Can and Tas, Fatih and Argunşah, Ali Özgür and Akan, Batu and Karabalkan, Harun and Çökelek, Emrecan and Fıçıcı, Osman Rahmi and Sezer, Volkan and Danıs, Serhan and Karaca, Mehmet and Abbak, Mehmet and Uzunbaş, Mustafa Gökhan and Eritmen, Kayhan and Kalaycıoğlu, Çağlar and İmamoğlu, Mümin and Karabat, Çağatay and Peyiç, Merve and Arslan, Burak Bülent (2007) Data collection with "UYANIK": too much pain; but gains are coming. In: DSPincars,

Acatay, Kazım and Şimşek, Eren and Ow-Yang, Cleva W. and Menceloğlu, Yusuf Z. (2005) Generation of superhydrophobic surfaces by electrospinning process. In: the 229th American Chemical Society National Meeting, San Diego, California/USA

Akalın, Altuna and Kasap, Zeynep and Kavak, Ersen and Sezerman, Uğur (2004) G proteinleri bağlayan moleküllerin ligand seçiciliklerinin SVM yöntemiyle belirlenmesi. In: Biyomedikal Mühendisliği Ulusal Toplantısı, BİYOMUT 2004, İstanbul, Turkey

Akşit, Mahmut Faruk (2008) 3-D analysis of high density brush stiffness with friction-pressure coupling. In: VI. Türkiye Abaqus Kullanıcılar Toplantısı - TAKT 2008, İstanbul

Akşit, Mahmut Faruk and Kandemir, İlyas and Doğu, Yahya and Kızıl, Hüseyin (2006) An investigation of pressure stiffness coupling in brush seals. In: Eleventh Int. Symp. on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu

Baran, Eray Abdurrahman and Hançer, Cevdet and Çalıkoğlu, Egemen and Duman, Emre and Çetinsoy, Ertuğrul and Ünel, Mustafa and Akşit, Mahmut Faruk (2008) İnsansız hava araçları için test düzeneği tasarımı ve üretimi. In: Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul, Türkiye

Başoğlu, Muhammed Fatih and Zerin, Zihni and Kefal, Adnan and Öterkuş, Erkan (2021) Development of a micro-crack toughening mechanism for unidirectional composite plates by using peridynamics. In: 24th International Conference on Composite Structures (ICCS24), Porto, Portugal

Bilge, Kaan and Başer, Gülnur and Papila, Melih (2012) Effect of TEX on the strength and failure envelopes of non-crimp glass fiber composites. In: 15th European Conference on Composite Materials (ECCM15), Venice, Italy

Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2011) Strength of hybrid composites reinforced with surface modified polymer/MWCNTs nano-composite interlayers. In: 18th International Conference on Composite Materials (ICCM18), Jeju Island, Korea

Birdal, Tolga and Erçil, Aytül (2007) Real-time automated road, lane and car detection for autonomous driving. In: DSPincars 2007, Istanbul

Budak, Hikmet and Yavuz, Y. F. (2005) Comparative sequence analysis to identify functional elements for functional genomics. In: International Conference on Mathematics and Engineering Techniques in Medicine and Biological Sciences (METMBS 05), Las Vegas, Nevada, USA

Çilingir, Halime Didem and Menceloğlu, Yusuf Z. and Papila, Melih (2008) The effect of IPMC parameters in electromechanical coefficient based on equivalent beam theory. In: Smart Structures/Nondestructive Evaluation for Health Monitoring + Diagnostics, San Diego, California, USA

Dumanlı, Ahu Gümrah and Sakintuna, Billur and Yürüm, Yuda (2004) Determination of oxidation characteristics of fir wood. In: American Chemical Society 228th National Meeting, Philadelphia, USA

Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk and Doğu, Yahya (2006) Effect of shear heat on hydrodynamic lift of brush seals in oil sealing. In: 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Sacramento, California

El-Kahlout, Yasser and Kızıltaş, Güllü (2007) An Efficient optimization framework for material and conductor designs of antennas. In: International Conference on Electromagnetics in Advanced Applications, ICEAA'07, Torino, Italy

El-Kahlout, Yasser and Kızıltaş, Güllü (2007) Bayesian trained rational functions for electromagnetic design optimization. In: 2007 IEEE AP-S International Symposium, Honolulu, Hawaii

Erçil, Aytül and Sezer, Osman Gökhan and Altunbaşak, Yücel (2006) Face recognition with independent component based super-resolution. In: Visual Communications and Image Processing 2006, California

Ertek, Gürdal and Aksu, Burak and Birbil, Ş. İlker and İkikat, Cihan and Yıldırmaz, Can (2005) Application of local search methods for solving a quadratic assignment problem: A case study. In: International Conference on Computers and Industrial Engineering, Istanbul, Turkey

Haker, Duygu and Ertuğrul, Fahriye and Çakmak, İsmail and Budak, Hikmet and Sayers, Zehra (2005) Bugday arpa ve celtikte WRKY gen ailesinin izole edilmesi ve sekanslanması. In: XIV Ulusal Biotechnology Conference, Eskişehir, Turkey

Karabaşoğlu, Orkun and Kızıltaş, Güllü (2007) Design optimization of artificial magneto-dielectrics for RF applications. In: Metanaterials'2007: First International Congress on Advanced Electromagnetic Materials in Microwaves and Optics, Rome, Italy

Kavlak, Nursel and Ulusoy, Gündüz and Birbil, Ş. İlker and Sivrikaya Şerifoğlu, Funda (2005) Client-contractor bargaining on net present value in the context of a project with limited resources. In: 35th International Conference on Computers and Industrial Engineering, İstanbul, Turkey

Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet (2021) Real-time monitoring of crack propagation in fiber-reinforced composite plates using iFEM methodology. In: 8th International Conference on Marine Structures (MARSTRUCT), Trondheim, Norway

Keskin, Merve and Akhavan Tabatabaei, Raha and Çatay, Bülent (2019) Electric vehicle routing problem with time windows and stochastic waiting times at recharging stations. In: 2019 Winter Simulation Conference (WSC), Maryland, USA

Keskinöz, Mehmet and Sarıkaya, Yunus (2006) Performance comparison of minutia based and correlation filter based fingerprint verification methods=. In: Signal Processing and Communications Applications, 2006 IEEE 14th, Antalya

Koşar, Ali and Özseçen, Yalgın Muzaffer (2009) Exergy analysis of second generation micro heat sinks under flow boiling conditions. In: 3rd International Conference on Energy Sustainability (ES2009), San Francisco, California, USA

Koşar, Ali and Schneider, Brandon R. and Yoav, Peles (2009) Hydrodynamic characteristics of crossflow over mems-based pillars. In: ASME International Mechanical Engineering Congress and Exposition, Boston, MA

Koz, Mustafa and Koşar, Ali (2008) Parametric study on the effect of endwalls on heat transfer and fluid flow in micro pin-fin heat sinks. In: ECI International Conference on Heat Transfer and Fluid Flow in Microscale, Whistler, BC, Canada

Marques, Ricardo and Rodrigues, Francisco and Emami Tabrizi, Isa and Kefal, Adnan and Ali, Hafiz Qasim and Yıldız, Mehmet and Suleman, Afzal (2021) Probabilistic approach for thermoelastic signal source identification in carbon fiber/epoxy composite materials using digital image correlation. In: 24th International Conference on Composite Structures (ICCS24), Porto, Portugal

Mensur Alkoy, Ebru and Papila, Melih (2009) Electrical properties of CuO doped-KNN ceramics and 1-3 piezocomposites. In: 2009 IEEE Ultrasonics Symposium, Roma, Italy

Menşur Alkoy, Ebru and Dağdeviren, Canan and Papila, Melih (2009) Pb(Zr,Ti)O3 nanofibers produced by electrospinning process. In: 2008 MRS Fall Meeting (Symposium V on Materials, Devices, and Characterization for Smart Systems), Boston, USA

Naskali, Ahmet Teoman and Kunt, Emrah Deniz and Shoukry Mohammed Khalil, Islam and Yüksel, Ebubekir and Şabanoviç, Asif (2010) SU mikro montaj istasyonu gerçek zamanlı kontrol mimarisi. In: Otomatik Kontrol Ulusal Toplantısı 2010 (TOK'2010), Gebze, Kocaeli

Öncü, Ahmet and Tunçalp, Deniz and Denizel, Meltem (2004) Enterprise resource planning technology as a source of change and stability in organizations. In: EuroMA 2004, Operations as a Change Agent, Paris

Öner, Kaan Taha and Çetinsoy, Ertuğrul and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İlyas and Gülez, Kayhan (2008) Dynamic model and control of a new quadrotor unmanned aerial vehicle with tilt-wing mechanism. In: ICCARV 2008 : "International Conference on Control, Automation, Robotics and Vision", Paris, France

Öner, Kaan Taha and Çetinsoy, Ertuğrul and Ünel, Mustafa and Kandemir, İlyas and Akşit, Mahmut Faruk and Gülez, Kayhan (2008) Yeni bir insansız hava aracının (SUAVi) dikey uçuş kipi için dinamik modeli ve yörünge kontrolü. In: Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul, Türkiye

Özdemir, Mehmed Rafet and Koşar, Ali (2010) Boiling heat transfer in microtubes at high flow rates. In: 14th International Heat Transfer Conference (IHTC-14), Washington, DC

Özdemir, Mehmed Rafet and Koşar, Ali (2011) Experimental study on single phase flow in microchannels at high mass flow rates. In: 8th International Conference on Nanochannels, Microchannels and Minichannels - 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Microchannels and Minichannels (FEDSM2010-ICNMM2010), Montreal, Canada

Özdemir, Mehmed Rafet and Koşar, Ali and Demir, Orçun and Özenel, Cemre and Bahçıvan, Oğuzhan (2010) Thermal-hydraulic, exergy and exergy-economic analysis of micro heat sinks at high flow rates. In: 10th ASME Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey

Özden, Elif and Menceloğlu, Yusuf Z. and Papila, Melih (2010) Electrospun polymer/MWCNTs nanofiber reinforced composites. In: MRS Fall Meeting 2009, Boston, MA

Özden Yenigün, Elif and Atılgan, Canan and Menceloğlu, Yusuf Z. and Papila, Melih (2012) Tracing the superior thermo-mechanical properties in nanocomposites of crosslinked fillers at the interface: molecular point of view. In: 15th European Conference on Composite Materials (ECCM15), Venice, Italy

Özgür, Erol and Ünel, Mustafa (2006) İçbükey eşleştirmeleriyle nesne tanıma. In: Sinyal İşleme ve Uygulamaları Kurultayı (SIU2006), Antalya

Papila, Melih and Haftka, Raphael T. and Mason, William H. and Alves, Rafael (2004) Tailoring wing structures for reduced drag penalty in off-design flight conditions. In: 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY

Sağıroğlu, Mahmut Şamil and Erçil, Aytül (2005) A texture based approach to reconstruction of archaeological finds. In: VAST 2005, Italy

Sakintuna, Billur and Aktaş, Zeki and Yürüm, Yuda (2003) Synthesis of porous carbon materials by carbonization in natural zeolite nanochannels. In: American Chemical Society 226th National Meeting, New York City, N.Y.

Sakintuna, Billur and Fakıoğlu, Enis and Yürüm, Yuda (2004) Diffusion of volatile organic materials in a natural zeolite. In: American Chemical Society 228th National Meeting, Philadelphia, USA

Sakintuna, Billur and Yürüm, Yuda (2005) Preparation and characterization of nanoporous carbons using microwave assisted AlPO4-5 as template. In: Nanotechnology in Carbon and Related Materials, Session 13: Poster Session,, University of Sussex at Brighton, U.K.

Sezerman, Uğur (2005) Uluslararası standardlarda biyodizel üretimi. In: BİYOENERJİ 2004, İzmir, Turkey

Stallkamp, Johannes and Ekenel, Hazım Kemal and Erdoğan, Hakan and Stiefelhagen, Rainer and Erçil, Aytül (2007) Video-based driver identification using local appearance face recognition. In: DSPincars 2007,

Stykes, David M. and Cole, Gregory S. and Staples, Daniel A. and Koşar, Ali and Bergles, Arthur E. (2010) Critical heat flux in cooling channels for flow-field probes. In: 14th International Heat Transfer Conference (IHTC-14), Washington, DC

Tabak, Ahmet Fatih and Yeşilyurt, Serhat (2007) Numerical analysis of the 3D flow induced by propagation of plane-wave deformations on thin membranes inside microchannels. In: The 5th International Conference on Nanochannels, Microchannels & Minichannels, Universidad De Las Americas, Puebla, Mexico

Volakis, John L. and Kızıltaş, Güllü (2007) Novel materials for RF devices. In: 2007 IEEE AP-S International Symposium, Honolulu, Hawaii

Yanıkoğlu, Berrin and Çamlıkaya, Eren and Erdoğan, Hakan (2007) Saklı modeli kullanarak ses ile metin bağımlı kimlik doğrulama. In: Sinyal İşleme ve İletişim Uygulamaları Kurultayı SİU 2007, Eskişehir, Turkiye

Yördem, Sinan Onur and Gülleroğlu, Mert and Öğüt, Erdem and Menceloğlu, Yusuf Z. and Papila, Melih (2006) Piezoelectric Polymer and Ceramic Ultrafine Fibers for Piezocomposite Films. In: 21st Technical Conference- American Soceity for Composites, Dearborn MI USA (Accepted)

Yüksel, Tuğçe (2023) Thermal and performance modeling of electric vehicle batteries [Elektrikli araç bataryaları için sıcaklık ve performans modellenmesi]. In: 24th Congress on Thermal Science and Technology with International Participation (Ulibtk'23), Ankara, Turkiye

Working Paper / Technical Report

Bülbül, Kerem (2010) A hybrid shifting bottleneck-tabu search heuristic for the job shop total weighted tardiness problem. [Working Paper / Technical Report] Sabanci University ID:SU_FENS_2010/0002

Yüceoğlu, B. and Birbil, Ş. İlker (2007) Patching the security breach: Locating and guarding the guards. [Working Paper / Technical Report] Sabanci University ID:SU_FENS_2007/0018

Book Section / Chapter

Acatay, Kazım and Şimşek, Eren and Akel, Mert and Menceloğlu, Yusuf Z. (2004) Electrospinning of low surface energy quaternary ammonium salt containing polymers and their antibacterial activity. Nanoengineered nanofibrous Materials. Nato Science Series II, No:169. Kluwer Academic Publishinng Co, USA, pp. 97-106. ISBN 1402025491

Arca, Miray A. and Papila, Melih and Çöker, Demirkan (2016) Experimental investigation of strength of curved beam by thin ply non-crimp fabric laminates. In: Zehnder, Alan T. and Carroll, Jay and Hazeli, Kavan and Berke, Ryan B. and Pataky, Garrett and Cavalli, Matthew and Beese, Alison M. and Xia, Shuman, (eds.) Fracture, Fatigue, Failure and Damage Evolution: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics Series, 8. Springer, Switzerland, pp. 37-42. ISBN 978-3-319-42194-0 (Print) 978-3-319-42195-7 (Online)

Arık, Mehmet and Koşar, Ali and Bostancı, Hüseyin and Bar-Cohen, Avram (2011) Pool boiling critical heat flux in dielectric liquids and nanofluids. In: Bar-Cohen, Avram and Cho, Young I., (eds.) Advances in Heat Transfer. Elsevier, US, pp. 1-88. ISBN 978-0-12-381529-3

Bilge, Kaan and Papila, Melih (2014) Interlayer toughening mechanisms of composite materials. In: Qin, Qinghua and Ye, Jianqiao, (eds.) Toughening Mechanisms in Composite Materials. Elsevier - Woodhead Publishing, Amsterdam, Netherlands. ISBN 9781782422792 (Accepted)

Erçil, Aytül (2006) Experiments on decision fusion for driver recognition. Experiments on Decision Fusion for Driver Recognition. UNSPECIFIED. (Accepted)

Ertek, Gürdal (2007) Teaching warehousing concepts through interactive animations and 3D models. In: Lahmar, Maher, (ed.) Facility Logistics: Approaches and Solutions to Next Generation Challenges. Engineering and Management Innovation, 2. Auerbach, USA. ISBN 978-0849385186

Ertek, Gürdal and İncel, Bilge and Arslan, Mehmet Can (2007) Impact of crossaisles in a rectangular warehouse: a computational study. In: Lahmar, Maher, (ed.) Facility Logistics: Approaches and Solutions to Next Generation Challenges. Engineering and management innovation, v.2. Auerbach, USA. ISBN 978-0849385186

Ertek, Gürdal and Tunç, Murat Mustafa (2012) Re-mining association mining results through visualization, data envelopment analysis, and decision trees. In: Kahraman, Cengiz, (ed.) Computational Intelligence Systems in Industrial Engineering. Atlantis Computational Intelligence Systems; 6. Atlantis Press/Springer, Germany, pp. 601-622. ISBN 978-94-91216-76-3

Kızıltaş, Güllü and Papila, Melih and Yılmaz, Bengisu and Bilge, Kaan (2019) Challenges in micro-CT characterization of composites. In: Orhan, Kaan, (ed.) Micro-Computed Tomography (Micro-CT) in Medicine and Engineering. Springer, Cham, Switzerland, pp. 225-246. ISBN 978-3-030-16640-3 (Print) 978-3-030-16641-0 (Online)

Onan, Kıvanç and Ülengin, Füsun and Sennaroğlu, Bahar (2014) Locating temporary storage sites for managing disaster waste, using multiobjective optimization. In: Bidanda, Bopaya and Sabuncuoğlu, İhsan and Kara, Bahar Y., (eds.) Industrial Engineering Non-Traditional Applications in International Settings. CRC Press, Boca Raton, pp. 99-114. ISBN 978-1-4822-2687-4 (Print) 978-1-4822-2688-1 (Online)

Yanıkoğlu, Berrin (2006) Belge bölütleme ve tanıma. Türkiye Bilişim Ansiklopedisi. Papatya Yayıncılık, İstanbul, pp. 111-116. ISBN 975679638X

Monograph

Papila, Melih (2020) Double-double laminated skin/grid architecture in structural composite design. Project Report. Tübitak.

Volumes Edited / Special Issues

Kinra, Aseem and Ülengin, Füsun (2021) Advances in thoughts and approaches for transport and logistics systems performance evaluation. [Volumes Edited / Special Issues] (Accepted)

Akşit, Mahmut Faruk (2007) Proceedings for INGAS2007 2nd International Symposium and Exhibition on Natural Gas Operations. [Volumes Edited / Special Issues]

Akşit, Mahmut Faruk and Doğu, Yahya (2005) INGAS2005 uluslararası doğalgaz işletmeciliği ve teknik eğitim sempozyumu bildiriler kitabı. [Volumes Edited / Special Issues]

Thesis

Acatay, Kazım (2004) Generation of superhydrophobic surfaces by electrospinning process. [Thesis]

Açık, Müge (2005) Nano-engineering of conducting polymers /. [Thesis]

Adlı, Mezher (2002) The Role of lipid peroxidation end product, 4-Hydroxy-2-Nonenal in cell signalling. [Thesis]

Akan, Pelin (2002) Computational approaches to understanding the protein structure. [Thesis]

Aksoylar, İbrahim Halil (2005) Identification of upstream conserved noncoding sequences for the analysis of transcriptional activation on IL-7 receptor alpha gene. [Thesis]

Arslan, Alper Mehmet (2005) Role of heat shock proteins in tumor necrosis factor-induced nuclear factor-kappaB signaling pathway. [Thesis]

Bakkal, Süphan Emine (2003) Cloning, characterization and expression of A. thaliana G protein α-subunit gene for structural studies. [Thesis]

Barlak, Eda Sevim (2007) Feature selection using genetic algorithms. [Thesis]

Bilecen, Kıvanç (2003) Cloning, characterization and expression of a novel metallothionein gene from triticum and theoretical and experimental structure-function relationship prediction. [Thesis]

Bulut, Karahan (2004) Three dimensional optical profilometry using a four-core optical fiber. [Thesis]

Canlı, Özge (2007) Quantification of gene expression in agrostis species subjected to zinc deficiency /. [Thesis]

Cebeci, Özge (2006) Molecular characterization and expression profiling of cd-responsive genes in triticum durum. [Thesis]

Çakmak, Umut Can (2017) Traffic speed prediction with neural networks. [Thesis]

Çoruh, Ceyda (2007) Identification and characterization of a cDNA encoding ZIP transporter protein in Triticum dicoccoides. [Thesis]

Dartan, Burcu (2004) A novel AP2 domain transcription factor from lycopersicon esculentum, functions in Tobacco Mosaic Virus pathogenesis. [Thesis]

Doğruel, Mutlu (2002) Computational prediction of protein subcellular localization and function. [Thesis]

Erdoğan, Didem Gülcenan (2003) Influence of calcium deficiency on superoxide generating-NADPH oxidase and antioxidant defense systems in bean root cells. [Thesis]

Gamsız, Ece Dilber (2003) Cytotoxicity of peroxynitrite and nitric oxide induced oxidative stress on 3T3 fibroblast cell line. [Thesis]

Gökçe, Onur (2007) Identification of zinc binding proteins of wheat seed. [Thesis]

Göktuna, Serkan İsmail (2005) MEKK1 and MEKK3 involvement in TNF-alpha signalling in cervical carcinoma hela cells. [Thesis]

Işık, Zerrin (2003) Computational approaches to protein structure prediction. [Thesis]

Işık, Zeynep (2007) Molecular identification of differentially expressed Zinc related genes in cultivated bread wheat. [Thesis]

Kaplan Türköz, Burcu (2004) Investigation of cloning strategies for A. thaliana G Protein [alpha]-subunit gene in Pichia Pastoris. [Thesis]

Korkmaz, Gözde (2007) Molecular analysis of historical wine grape variety candidates found in Urla. [Thesis]

Köktürk, Burcu (2006) Cadmium uptake and antioxidative enzymes in durum wheat cultivars in response to increasing Cd application. [Thesis]

Kurtuluş, Sema (2005) Genetic reporter assays to study the regulation of interleukin-7 receptor alpha gene expression. [Thesis]

Kuru, Yener (2004) YAG (Y[3]Al[5]O[12]) as a Scavenger for Si and Ca. [Thesis]

Kütük, Özgür (2006) Characterization of intracellular signaling cascades in 4-hydroxynonenal-induced apoptosis:. [Thesis]

Muganlı, Zülal (2022) Cloning, expression, characterization, and applications of arctic pseudomonas putida origin (AFPA) antifreeze protein. [Thesis]

Nalbant, Işıl Şafak (2006) Determination of cis-acting regulatory elements of the IL-7R alpha gene using flow cytometric reporter assays. [Thesis]

Okan, Osman Burak (2005) Glassiness and coupling of time scales in functional proteins /. [Thesis]

Öğüt, Erdem (2007) Electroactivity of PVDF electrospun fiber mats and ZNO-PVDF composites. [Thesis]

Önal, Pınar (2007) Screening of plant factors that modulate the activation of the NF-kB transcription factor in mammalian cells. [Thesis]

Önal, Sedef (2006) Identification of resistance gene analos expressed in the absence of pathogen in tall fescue and bermudagrass /. [Thesis]

Özen, İstem (2006) RF magnetron-sputtered ZNO thin films: on the evolution of microstructure and residual stresses. [Thesis]

Özer, Güngör (2004) Binding proteins in the small world of residue networks /. [Thesis]

Öztürk, Gözde İpek (2004) Selected methods of surface engineering applied to materials science. [Thesis]

Pamay, Mehmet Berke (2011) A linear programming based method for the resource constrained multiproject scheduling problem with weighted earliness/tardiness costs. [Thesis]

Sakintuna, Billur (2005) Synthesis and characterization of porous carbons using natural zeolites and AIPO4-5 as templates and diffusion of volatile organic chemicals in these porous media. [Thesis]

Seçkin, Çağdaş (2003) A. thaliana G protein y-subunit gene : cloning, characterization and expression. [Thesis]

Şahin, Erinç (2003) Construction of a GFP containing recombinant plasmid facilitating immobilization, visualization and quantification of fusion proteins on interactive polymeric surfaces. [Thesis]

Şahin, Mert (2002) Structure prediction of A.thaliana G protein alpha subunit using bioinformatics tools based on sequence alignments. [Thesis]

Şen, Ünal (2004) Dynamic simulations of novel oligomers containing fluorinated segments. [Thesis]

Tabak, Ahmet Fatih (2007) Simulation based experiments of traveling-plane-wave-actuator miropumps and microswimmers. [Thesis]

Tekbulut, Mehmet Tuğrul (2006) MicroRNA target prediction by constraint programming. [Thesis]

Tiryakioğlu, Melis (2002) Effect of cadmium on growth and antioxidant enzymes in two barley cultivars. [Thesis]

Tunç, Cevza Esin (2017) Changes in root morphology and nutrient uptake in wheat plants with varied potassium and magnesium supply. [Thesis]

Ünal, Mesut (2004) Preparation and characterization of Sebs-Clay nanocomposites. [Thesis]

Verim, Aysegül (2006) Molecular mechanism of aven in taxane induced apoptosis in ER± breast cancer cell lines: MCF-7 and MDA-MB-231 cells. [Thesis]

Yördem, Sinan Onur (2006) Piezoelectric ultrafine polymer and ceramic fibers by electrospinning: process development and characterization. [Thesis]

This list was generated on Tue Dec 10 19:16:14 2024 +03.