Items where Division is "Materials Science & Eng." and Year is 2023

A

Akgül, Gökçen and Oskay, Kürşad Oğuz and Aktürk, Merve and Karamustafa, Ayşenur and Sözer, Sözer and Maden, Tuğba Bolat and Erdem, Emre (2023) Electrochemical energy storage capacity of surface engineered renewable carbon derived from industrial tea waste by HNO3 and K2CO3. Surface Engineering and Applied Electrochemistry, 59 (2). pp. 199-209. ISSN 1068-3755 (Print) 1934-8002 (Online)

Akgün, Sercan and Şenol, Cahit Orhun and Kılıç, Göktuğ and Tabrizi, Isa Emami and Yıldız, Mehmet (2023) A novel damage evaluation of CFRPs under mode-I loading by using multi-instrument structural health monitoring methods. Engineering Fracture Mechanics, 286 . ISSN 0013-7944

Al-Nadhari, Abdulrahman Saeed Abdulqader and Şenol, Halil and Ulus, Hasan and Topal, Serra and Yıldız, Mehmet (2023) Acoustic emission analysis on mechanical properties and damage evolution of multiscale Kevlar/Glass hybrid 3D orthogonal woven composites under flexural loading. In: 7th International Conference of Engineering Against Failure (ICEAF) Conference, Spetses Island, Greece (Accepted)

Aliyeva, Nargiz and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) Revolutionizing transportation composite structures: lightweight, sustainable, and multi-scale hybrid design through waste tire-driven graphene, hemp fiber, and bio-based overmoulding. Journal of Thermoplastic Composite Materials . ISSN 0892-7057 (Print) 1530-7980 (Online) Published Online First https://dx.doi.org/10.1177/08927057231222821

Altaf, Cigdem Tuc and Colak, Tuluhan Olcayto and Erdem, Emre and Unal, Ugur and Bakan Mısırlıoğlu, Feray and Condorelli, Guglielmo Guido and Sankir, Nurdan Demirci and Sankir, Mehmet (2023) Disulfonated polyarylene ether sulfone membrane for graphitic carbon nitride/zinc oxide based photo-supercapacitors. Electrochimica Acta, 456 . ISSN 0013-4686

Ammar, Ameen Uddin and Aleinawi, Mohamad and Erdem, Emre (2023) Hydrogen electrical vehicles. In: Sankır, Mehmet and Sankir, Nurdan, (eds.) Hydrogen Electrical Vehicles. Wiley, pp. 1-10. ISBN 9781394166381 (Print) 9781394167555 (Online)

Atılgan, Canan and Liu, Gökşin and Jalalpour, Farzaneh and Ekmen, Erhan and Berksöz, Melike and Atılgan, Ali Rana and Sayers, Zehra (2023) Increased ionic strength triggers multiple conformations in both apo and holo forms of bacterial ferric binding protein. In: Biophysical Society Annual Meeting, San Diego, CA, USA

Avcıoğlu, Suna and Aktürk, Merve and Erdem, Emre and Kaya, Figen and Kaya, Cengiz (2023) Boron carbide as an electrode material: tailoring particle morphology to control capacitive behaviour. Materials, 16 (2). ISSN 1996-1944

Aydın, Mehmet Serhat and Şahin, Mervenaz and Doğan, Zeynep and Kızıltaş, Güllü (2023) Microstructural characterization of PCL-HA bone scaffolds based on nonsolvent-induced phase separation. ACS Omega, 8 (50). pp. 47595-47605. ISSN 2470-1343

B

Barzgar Vishlaghi, Mahsa and Kahraman, Abdullah and Österbacka, Nicklas and Usman, Emre and Erdem, Emre and Sennaroğlu, Alphan and Wiktor, Julia and Kaya, Sarp (2023) Accelerating water oxidation on BiVO4 photoanodes via surface modification with Co dopants. Journal of Materials Chemistry A . ISSN 2050-7488 (Print) 2050-7496 (Online) Published Online First https://dx.doi.org/10.1039/d3ta01418e

Batyrow, Merdan and Dericiler, Kuray and Palabiyik, Büşra Akkoca and Saner Okan, Burcu and Öztürk, Hande and Erucar, İlknur (2023) Combining tensile test results with atomistic predictions of elastic modulus of graphene/polyamide-6,6 nanocomposites. Materials Today Communications, 35 . ISSN 2352-4928

Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Ünal, Serkan and Dızman, Bekir (2023) Amphiphilic polyoxazoline copolymer-imidazole complexes as tailorable thermal latent curing agents for one-component epoxy resins. ACS Omega, 8 (49). pp. 47173-47186. ISSN 2470-1343

D

Dehghani, Parisa and Esmaeili Rad, Monireh and Zarepour, Atefeh and Siva-Kumar, Ponnurengam Malliappan and Zarrabi, Ali (2023) An insight into the polymeric nanoparticles applications in diabetes diagnosis and treatment. Mini-Reviews in Medicinal Chemistry, 23 (2). pp. 192-216. ISSN 1389-5575 (Print) 1875-5607 (Online)

Dericiler, Kuray and Zafar, Salman and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) The effect of reinforcement aspect ratio on the performance of PA66 composites with recycled carbon fiber and upcycled graphene nanoplatelets: an interface characterization from process to modeling. Journal of Applied Polymer Science, 140 (35). ISSN 0021-8995 (Print) 1097-4628 (Online)

E

Ergene, Arzu and Khabbazabkenar, Sirous and Şenol, Ayça and Günay, Ece and Kurt, Hasan and Topcu, Gökhan and Ow-Yang, Cleva W. (2023) Oxide glass formers extending persistent luminescence in Eu and Dy co-doped strontium aluminates. Journal of Luminescence, 257 . ISSN 0022-2313 (Print) 1872-7883 (Online)

Eryildiz, Bahriye and Ozbey-Unal, Bahar and Menceloğlu, Yusuf Z. and Keskinler, Bülent and Koyuncu, İsmail (2023) Development of robust superhydrophobic PFA/TMI/PVDF membrane by electrospinning/electrospraying techniques for air gap membrane distillation. Journal of Applied Polymer Science, 140 (12). ISSN 0021-8995 (Print) 1097-4628 (Online)

Esmaeili Rad, Monireh and Cankurtaran, Selen Ezgi and Gülmez, Mert and Kurt, Hasan and Yüce, Meral (2023) Bioconjugated materials: preparation, characterization and therapeutic applications. Comprehensive Analytical Chemistry. Elsevier.

G

Gündoğdu, Selin Öykü (2023) Development Of Photo-Triggered Controlled Release Systems As Pesticide Nanoformulations. [Thesis]

Güner-Yılmaz, Ö. Zeynep and Yılmaz, Anıl and Akbıyıkoğulları, Karya and Kocaağa, Banu and Houshmand Rezaghol, Sara and Zabara, Mohammed Ahmed and Yürüm, Alp and Bayazıt, Mustafa Kemal and Batırel, Saime and Yavuz, Reha and Karatepe, Nilgün and Güner, F. Seniha (2023) Nanopartikül katkılı özel tasarım yara örtüsü: grafen oksit ve modifiye grafen oksit katkılı doğal hidrojellerin potansiyel kullanımı. In: 15. Ulusal Kimya Mühendisliği Kongresi, Çanakkale

H

Hoque, Muhammad Jahidul and Li, Longnan and Ma, Jingcheng and Cha, Hyeongyun and Sett, Soumyadip and Yan, Xiao and Rabbi, Kazi Fazle and Ho, Jin Yao and Khodakarami, Siavash and Suwala, Jason and Yang, Wentao and Mohammad Moradi, Omid and Özaydın İnce, Gözde and Miljkovic, Nenad (2023) Ultra-resilient multi-layer fluorinated diamond like carbon hydrophobic surfaces. Nature Communications, 14 (1). ISSN 2041-1723

I

Ivanoska-Dacikj, Aleksandra and Oguz-Gouillart, Yesim and Hossain, Gaffar and Kaplan, Müslüm and Sivri, Çağlar and Ros-Lis, José Vicente and Mikucioniene, Daiva and Munir, Muhammad Usman and Kızıldağ, Nuray and Ünal, Serkan and Safarik, Ivo and Akgül, Esra and Yıldırım, Nida and Bedeloğlu, Ayşe Çelik and Ünsal, Ömer Faruk and Herwig, Gordon and Rossi, René M. and Wick, Peter and Clement, Pietro and Sarac, A. Sezai (2023) Advanced and smart textiles during and after the COVID-19 pandemic: issues, challenges, and innovations. Healthcare (Switzerland), 11 (8). ISSN 2227-9032

K

Keskin, Başak and Korkut, Sevde and Ormancı-Acar, Türkan and Turken, Turker and Taş, Cüneyt Erdinç and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, Ismail (2023) Pilot scale nanofiltration membrane fabrication containing ionic co-monomers and halloysite nanotubes for textile dye filtration. Water Science and Technology, 87 (6). pp. 1529-1541. ISSN 0273-1223 (Print) 1996-9732 (Online)

Kocanalı, Atakan and Başkan, Havva and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2023) A selective upcycling approach: growing 2D and 3D graphene oxide structures with size-controlled talc substrates from waste polypropylene with LCA protocols. Journal of Polymers and the Environment, 31 (9). pp. 4052-4068. ISSN 1566-2543 (Print) 1572-8919 (Online)

Kölgesiz, Sarp (2023) Polymer nanocomposites as active food packaging materials to improve the shelf life of fruits and vegetables. [Thesis]

L

Lejding, Tina and Persson, Lena and Andersen, Klaus Ejner and Bruze, Magnus and Derevyanko, Ludmyla and Elsner, Peter and Goh, Chee Leok and Gonçalo, Margarida and Goossens, An and Gülgün, Mehmet Ali and Isaksson, Marléne and Ljubojevic Hadzavdic, Suzana and Maibach, Howard and Matsunaga, Kayoko and Mowitz, Martin and Nixon, Rosemary and Pailin, Puangpet and Pratt, Melanie and Schuttelaar, Marie Louise A. and Sukakul, Thanisorn and Verma, Kaushal and Zimerson, Erik and Özkaya, Esen and Svedman, Cecilia (2023) Analysis of hexavalent chromium in cement samples from countries within and outside the EU: a study from the international contact dermatitis research group. Dermatitis, 34 (4). pp. 323-328. ISSN 1710-3568 (Print) 2162-5220 (Online)

N

Narin, Sümeyye and Erunsal, Sevil Cikrikci and Akinci, Cemil (2023) Development of photo-modulated non-toxic and adhesive smart gel films. Chemical Papers . ISSN 0366-6352 (Print) 1336-9075 (Online) Published Online First https://dx.doi.org/10.1007/s11696-023-03067-w

Nedjad, Syamak Hossein and Yıldız, Mehmet and Saboori, Abdollah (2023) Solidification behaviour of austenitic stainless steels during welding and directed energy deposition. Science and Technology of Welding and Joining, 28 (1). pp. 1-17. ISSN 1362-1718 (Print) 1743-2936 (Online)

O

Omar, Mohamed Ahmed Abdellah (2023) Understanding granulation of ceramic powders: Case study (Al2O3). [Thesis]

P

Ponnurengam Malliappan, Sivakumar and Yetişgin, Abuzer Alp and Demir Dede, Ebru and Şahin, Sevilay Burcu and Çetinel, Sibel (2023) Polysaccharide-bioceramic composites for bone tissue engineering: a review. International Journal of Biological Macromolecules, 250 . ISSN 0141-8130 (Print) 1879-0003 (Online)

R

Rastgoo, Madineh (2023) Direk Ink Writing Of Waterborne Polyurethane As A Biomedical Matrix: Assessing Mechanical Properties And The Performance Of Controlled Release. [Thesis]

S

Sadeghi, Ebrahim and Chamani, Sanaz and Erdem, Emre and Peighambardoust, Naeimeh Sadat and Aydemir, Umut (2023) NiMo/CoMoO4 heterostructure with confined oxygen vacancy for active and durable alkaline hydrogen evolution reaction. ACS Applied Energy Materials, 6 (14). pp. 7658-7671. ISSN 2574-0962

Saeidiharzand, Shaghayegh (2023) Anti-Icing Functional Biphilic Surfaces And Functionalized Multiscale Metal Organic Framework-Based Coatings. [Thesis]

Sepehri Gohar, Maryam (2023) Reduced Graphene Oxide/Polyaniline pH Sensor Based on Hybrid Microfabrication and Flexible Electronics Processes. [Thesis]

Sivakumar, Ponnurengam Malliappan and Yetişgin, Abuzer Alp and Şahin, Sevilay Burcu and Demir Dede, Ebru and Çetinel, Sibel (2023) Enhanced properties of nickel–silver codoped hydroxyapatite for bone tissue engineering: synthesis, characterization, and biocompatibility evaluation. Environmental Research, 238 . ISSN 0013-9351 (Print) 1096-0953 (Online)

T

Taş, Cüneyt Erdinç (2023) Effect of size-graded and polydopamine-coated halloysite nanotubes on fundamental properties of low-density polyethylene nanocomposite film. Turkish Journal of Chemistry, 47 (2). pp. 409-416. ISSN 1300-0527 (Print) 1303-6130 (Online)

Topal, Serra and Beylergil, Bertan and Yıldırım, Ceren and Ünal, Serkan and Yıldız, Mehmet (2023) Advancing aircraft repair patch prepregs: enhancing composite performance through resin type, cure cycle, and nanomaterial innovations. In: 3rd Global Conference on Advanced Nanotechnology & Nanomaterials, Berlin, Germany

Torabfam, Milad (2023) Design And Synthesis Of Green Nanostructures And Their Applications. [Thesis]

Tuna Genç, Münevver and Sarilmaz, Adem and Doğan, Semih and Aksoy Çekceoğlu, İlknur and Ozen, Abdurrahman and Aslan, Emre and Saner Okan, Burcu and Jaafar, Juhana and Ozel, Faruk and Ersoz, Mustafa and Hatay Patır, İmren (2023) Thermally-exfoliated graphene Oxide/ZnO nanocomposite catalysts for photocatalytic hydrogen evolution and antibacterial activities. International Journal of Hydrogen Energy . ISSN 0360-3199 Published Online First https://dx.doi.org/10.1016/j.ijhydene.2023.04.185

Y

Yalçınkaya, Esra and Başkan Bayrak, Havva and Saner Okan, Burcu (2023) Growing of 2D/3D graphene structures on natural substrates from aromatic plastic wastes by scalable thermal-based upcycling process with a comparative CO2 footprint analysis. Sustainable Materials and Technologies, 37 . ISSN 2214-9937

Z

Zarepour, Atefeh and Egil, Abdurrahim Can and Çakmak, Melike Çokol and Esmaeili Rad, Monireh and Cetin, Yüksel and Aydinlik, Şeyma and Özaydın İnce, Gözde and Zarrabi, Ali (2023) Fabrication of a dual-drug-loaded smart niosome-g-chitosan polymeric platform for lung cancer treatment. Polymers, 15 (2). ISSN 2073-4360

Ç

Çelik, Dilara and Karaca, Ali and Koç, Bahattin (2023) Directed energy deposition of parts with internal channels using removable graphite supports. 3D Printing and Additive Manufacturing . ISSN 2329-7662 (Print) 2329-7670 (Online) Published Online First https://dx.doi.org/10.1089/3dp.2023.0057

Çetin, Ebru (2023) Deciphering The Underlying Resistance-Conferring Mechanisms Of Dihydrofolate Reductase Using Energy Landscape Theory. [Thesis]

Çetiner, Büşra and Başkan Bayrak, Havva and Saner Okan, Burcu (2023) Application, recycling, environmental and safety issues, and future prospects of crystalline polymer composites. In: Parameswaranpillai, Jyotishkumar and Jacob, Jenny and Krishnasamy, Senthilkumar and Jayakumar, Aswathy and Hameed, Nishar, (eds.) Polymer Crystallization: Methods, Characterization and Applications. Wiley, pp. 323-358. ISBN 9783527350810 (Print) 9783527839247 (Online)

Çetiner, Büşra and Şahin Dündar, Gülayşe and Yusufoğlu, Yusuf and Saner Okan, Burcu (2023) Sustainable engineered design and scalable manufacturing of upcycled graphene reinforced polylactic acid/polyurethane blend composites having shape memory behavior. Polymers, 15 (5). ISSN 2073-4360

Ö

Öztürk, Sezen and Alipour Ghassabi, Ata and Kızıltaş, Güllü (2023) Effect of 3d scaffold morphology on bone tissue regeneration based on a multi-physics fem model. In: Tissue Engineering and Regenerative Medicine International Society (TERMIS), Krakow, Poland

Ş

Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü and Alipour Ghassabi, Ata (2023) Mesenchymal stem cell diffusion integrated mechano- biology analysis of 3d scaffolds. In: Tissue Engineering and Regenerative Medicine International Society (TERMIS), Krakow, Poland

Şahin Dündar, Gülayşe (2023) Sustainable Manufacturing Of Graphene-Reinforced Polypropylene Composites By Tailoring Compound Properties And Process Techniques. [Thesis]

Şahin Dündar, Gülayşe and Saner Okan, Burcu (2023) An efficient interface model to develop scalable methodology of melt processing of polypropylene with graphene oxide produced by an improved and eco-friendly electrochemical exfoliation. Journal of Applied Polymer Science, 140 (2). ISSN 0021-8995 (Print) 1097-4628 (Online)

Şahin Dündar, Gülayşe and Saner Okan, Burcu (2023) Compatibilizing effect of grafted recycled graphene on the viscoelasticity and mechanical performance of polypropylene composites. Journal of Reinforced Plastics and Composites . ISSN 0731-6844 (Print) 1530-7964 (Online) Published Online First https://dx.doi.org/10.1177/07316844231208484