Items where Division is "Materials Science & Eng." and Year is 2020

Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | K | M | N | P | R | S | T | U | Y | Z | Ç | Ö | Ş
Number of items: 88.

A

Abbasiasl, Taher and Niazi, Soroush and Sheibani Aghdam, Araz and Chen, Hongjian and Cebeci, Fevzi Çakmak and Ghorbani, Morteza and Grishenkov, Dmitry and Koşar, Ali (2020) Effect of intensified cavitation using poly(vinyl alcohol) microbubbles on spray atomization characteristics in microscale. AIP Advances, 10 (2). ISSN 2158-3226

Abdizadeh, Haleh and Jalalypour, Farzaneh and Atılgan, Ali Rana and Atılgan, Canan (2020) A coarse-grained methodology identifies intrinsic mechanisms that dissociate interacting protein pairs. Frontiers in Molecular Biosciences, 7 . ISSN 2296-889X

Acar, Türkan Ormancı and Taş, Cüneyt Erdinç and Keskin, Başak and Seviniş Özbulut, Emine Billur and Turken, Turker and İmer, Derya Yüksel and Tüfekçi, Neşe and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2020) Thin-film composite nanofiltration membranes with high flux and dye rejection fabricated from disulfonated diamine monomer. Journal of Membrane Science, 608 . ISSN 0376-7388 (Print) 1873-3123 (Online)

Afghah, Seyedeh Ferdows (2020) Hybrid 3D bioprinting of functionalized structures for tissue engineering. [Thesis]

Afghah, Seyedeh Ferdows and Ullah, Mohib and Zanjani, Jamal Seyyed Monfared and Süt, Pınar Akkuş and Şen, Özlem and Emanet, Melis and Saner Okan, Burcu and Çulha, Mustafa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Koç, Bahattin (2020) 3D printing of silver-doped polycaprolactone-poly(propylene succinate) composite scaffolds for skin tissue engineering. Biomedical Materials, 15 (3). ISSN 1748-6041 (Print) 1748-605X (Online)

Akkaş Mohammadmoradi, Tuğçe and Zakharyuta, Anastasia and Taralp, Alpay and Ow-Yang, Cleva W. (2020) Cross-linked enzyme lyophilisates (CLELs) of urease: a new method to immobilize ureases. Enzyme and Microbial Technology, 132 . ISSN 0141-0229 (Print) 1879-0909 (Online)

Anıl, Deniz and Berksun, Ekin and Durmuş Sayar, Ayşe and Seviniş Özbulut, Emine Billur and Ünal, Serkan (2020) Recent advances in waterborne polyurethanes and their nanoparticle-containing dispersions. In: Zarras, Peter and Soucek, Mark D. and Tiwari, Atul, (eds.) Handbook of Waterborne Coatings. Elsevier, Amsterdam, Netherlands, pp. 249-302. ISBN 978-0-12-814201-1

Avcıoğlu, Suna and Buldu, Merve and Kaya, Figen and Üstündağ, Cem Bülent and Kam, Erol and Menceloğlu, Yusuf Z. and Kaptan, Hayri Yılmaz and Kaya, Cengiz (2020) Processing and properties of boron carbide (B4C) reinforced LDPE composites for radiation shielding. Ceramics International, 46 (1). pp. 343-352. ISSN 0272-8842 (Print) 1873-3956 (Online)

Avcioglu, Suna and Kaya, Figen and Kaya, Cengiz (2020) Effect of elemental nano boron on the transformation and morphology of boron carbide (B4C) powders synthesized from polymeric precursors. Ceramics International, 46 (11). pp. 17938-17950. ISSN 0272-8842

B

Bahmani Jalali, Houman and Sadeghi, Sadra and Baylam, Isinsu and Han, Mertcan and Ow-Yang, Cleva W. and Sennaroğlu, Alphan and Nizamoğlu, Sedat (2020) Erratum to: Exciton recycling via InP quantum dot funnels for luminescent solar concentrators (Nano Research, (2020), 10.1007/s12274-020-3207-9). Nano Research . ISSN 1998-0124 (Print) 1998-0000 (Online) Published Online First https://dx.doi.org/10.1007/s12274-020-3282-y

Berksoy-Yavuz, Ayse and Mensur-Alkoy, Ebru and Erdem, Emre and Alkoy, Sedat (2020) Electrical properties, EPR analyses and defect chemistry of Mn-doped 0.675PMN-0.325PT piezoceramics. Ceramics International, 46 (18). pp. 28980-28986. ISSN 0272-8842 (Print) 1873-3956 (Online)

Berktaş, İlayda (2020) Facile synthesis of graphite-and graphene-based hybrid additives by silanization and effects of these additives on the thermal conductivity of cementitious grouts used in shallow geothermal systems. [Thesis]

Berktaş, İlayda and Ghafar, Ali Nejad and Fontana, Patrick and Çaputcu, Ayten and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) Facile synthesis of graphene from waste tire/silica hybrid additives and optimization study for the fabrication of thermally enhanced cement grouts. Molecules, 25 (4). ISSN 1420-3049

Berktaş, İlayda and Ghafar, Ali Nejad and Fontana, Patrick and Çaputcu, Ayten and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) Synergistic effect of expanded graphite-silane functionalized silica as a hybrid additive in improving the thermal conductivity of cementitious grouts with controllable water uptake. Energies, 13 (14). ISSN 1996-1073

Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin (2020) Realtime localization and estimation of loads on aircraft wings from depth images. Sensors, 20 (12). ISSN 1424-8220

C

Candau, Nicolas and Oğuz, Oğuzhan and Peuvrel-Disdier, Edith and Bouvard, Jean Luc and Maspoch, María Lluïsa and Corvec, Guillaume and Pradille, Christophe and Billon, Noëlle (2020) Effect of the strain rate on damage in filled epdm during single and cyclic loadings. Polymers, 12 (12). ISSN 2073-4360

Cavuslar, Ozge and Nakay, Emre and Kazakoglu, Umut and Khabbazabkenar, Sirous and Ow-Yang, Cleva W. and Acar, Havva Yagci (2020) Synthesis of stable gold nanoparticles using linear polyethyleneimines and catalysis of both anionic and cationic azo dye degradation. Materials Advances, 1 (7). pp. 2407-2417. ISSN 2633-5409

Charkhesht, Vahid (2020) Novel Electrospun Anatase/Poly(3,4-Ethylenedioxythiophene) Polystyrene Sulfonate-based Li-ion Battery Anodes and their Electrochemical Performances. [Thesis]

D

Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Yıldız, Mehmet (2020) An experimental study on tensile and bending properties of biaxial warp knitted textile composites. Advanced Composite Materials, 29 (1). pp. 73-88. ISSN 0924-3046 (Print) 1568-5519 (Online)

Dericiler, Kuray and Alishah, Hamed Moeini and Bozar, Sinem and Güneş, Serap and Kaya, Figen (2020) A novel method for graphene synthesis via electrochemical process and its utilization in organic photovoltaic devices. Applied Physics A: Materials Science and Processing, 126 (11). ISSN 0947-8396 (Print) 1432-0630 (Online)

Dikyol, Caner (2020) Development of embedded multimaterial bioprinting platform for the biofabrication of vascular tissues. [Thesis]

Durak, Saliha and Esmaeili Rad, Monireh and Yetişgin, Abuzer Alp and Şutova, Hande Eda and Kutlu, Özlem and Çetinel, Sibel and Zarrabi, Ali (2020) Niosomal drug delivery systems for ocular disease-recent advances and future prospects. Nanomaterials, 10 (6). ISSN 2079-4991

E

Ebrahimi, Elnaz and Irfan, Muhammad and Shabani, Farzan and Kocak, Yusuf and Karakurt, Bartu and Erdem, Emre and Demir, Hilmi Volkan and Ozensoy, Emrah (2020) Core-crown quantum nanoplatelets with favorable type-II heterojunctions boost charge separation and photocatalytic NO oxidation on TiO2. ChemCatChem, 12 (24). pp. 6329-6343. ISSN 1867-3880 (Print) 1867-3899 (Online)

Egil, Abdurrahim Can and Ozdemir, Burak and Gok, Bahar and Kecel-Gunduz, Serda and Budama-Kilinc, Yasemin (2020) Synthesis, characterization, biological activities and molecular docking of Epilobium parviflorum aqueous extract loaded chitosan nanoparticles. International Journal of Biological Macromolecules, 161 . pp. 947-957. ISSN 0141-8130 (Print) 1879-0003 (Online)

El Khaldi, Raed M. and Paşaoğlu, Mehmet E. and Menceloğlu, Yusuf Z. and Özdoğan, Reyhan and Çelebi, Mithat and Kaya, Mehmet A. and Koyuncu, İsmail (2020) Application of high performance fo nanofibers based membrane for model and real seawater desalination. Desalination and Water Treatment, 205 . pp. 53-62. ISSN 1944-3994 (Print) 1944-3986 (Online)

Emami Tabrizi, Isa (2020) Understanding Failure Mechanisms in Hybrid Fiber Reinforced Laminates through the Combined usage of DIC, AE, Thermography and Optic Based Systems. [Thesis]

Ercan Kalkan, Merve and Karakaya, Nursel and Özkoç, Güralp (2020) POSS nanoparticles as a potential compatibilizer for natural rubber/butadiene rubber blends. Polymers for Advanced Technologies, 31 (10). pp. 2290-2300. ISSN 1042-7147 (Print) 1099-1581 (Online)

F

Fernandes, Mariana and Sohouli, Abdolrasoul and Yıldız, Mehmet and Suleman, Afzal (2020) Path planning and fiber angle optimization of continuous fiber composites for additive manufacturing. In: Joint Event: 23rd International Conference on Composite Structures (ICCS23) & 6th International Conference on Mechanics of Composites (MECHCOMP6), Portugal

G

Ghorbani, Morteza and Sheibani Aghdam, Araz and Talebian Gevari, Moein and Koşar, Ali and Cebeci, Fevzi Çakmak and Grishenkov, Dmitry and Svagan, Anna J. (2020) Facile hydrodynamic cavitation on chip via cellulose nanofibers stabilized perfluorodroplets inside layer-by-layer assembled slips surfaces. Chemical Engineering Journal, 382 . ISSN 1385-8947 (Print) 1873-3212 (Online)

Girişken, Çağla and Yanmaz, Ceyda and Can, Buse Nur and Ülçer, Yakup and Menceloğlu, Yusuf Z. (2020) Low density, high modulus polypropylene wood composites prepared by using thermo kinetic mixer. In: 35th International Conference of the Polymer Processing Society, PPS 2019, Cesme-Izmir, Turkey

H

Hassan Nezhad, Kosar (2020) Activation of aluminosilicate materials. [Thesis]

Hoffmann, Rudolf C. and Trapp, Maximilian and Erdem, Emre and Kratzer, Markus and Teichert, Christian and Kleebe, Hans-Joachim and Schneider, Jörg J. (2020) Synthesis and assembly of zinc oxide microcrystals by a low-temperature dissolution-reprecipitation process: lessons learned about twin formation in heterogeneous reactions. Chemistry - A European Journal (SI), 26 (42). pp. 9319-9329. ISSN 0947-6539 (Print) 1521-3765 (Online)

I

Ijaz, Aatif and Yağcı, M. Barış and Ow-Yang, Cleva W. and Demirel, A. Levent and Miko, Annamaria (2020) Formation of mesoporous silica particles with hierarchical morphology. Microporous and Mesoporous Materials, 303 . ISSN 1387-1811 (Print) 1873-3093 (Online)

K

Karakaya, Nursel and Papila, Melih and Özkoç, Güralp (2020) Effects of hot melt adhesives on the interfacial properties of overmolded hybrid structures of polyamide-6 on continuous carbon fiber/epoxy composites. Composites Part A: Applied Science and Manufacturing, 139 . ISSN 1359-835X

Karakaya, Nursel and Papila, Melih and Özkoç, Güralp (2020) Overmolded hybrid composites of polyamide-6 on continuous carbon and glass fiber/epoxy composites: 'an assessment of the interface'. Composites Part A: Applied Science and Manufacturing, 131 . ISSN 1359-835X (Print) 1878-5840 (Online)

Khabbazabkenar, Sirous (2020) Investigation of phase evolotion during crystallization of long afterglow strontium aluminate phosphor (Sr4Al14O25): The B2O3 effect. [Thesis]

Khabbazabkenar, Sirous and Kocjan, Andraž and Samardžija, Zoran and Fanetti, Mattia and Ergene, Arzu and Šturm, Sašo and Sezen, Meltem and Ow-Yang, Cleva W. (2020) Effect of sintering and boron content on rare earth dopant distribution in long afterglow strontium aluminate. Journal of the European Ceramic Society, 40 (12). pp. 4129-4139. ISSN 0955-2219 (Print) 1873-619X (Online)

Khan, Raja Muhammad Awais and Emami Tabrizi, Isa and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2020) Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites. Polymer Testing, 90 . ISSN 0142-9418 (Print) 1873-2348 (Online)

Kıral, Barış Emre (2020) Predicting in-plane uniaxial compressive moduli of hexagonal honeycoms using experimental analogues. [Thesis]

Kiani Zitani, Mahboubeh and Banijamali, Sara and Rüssel, Christian and Khabbazabkenar, Sirous and Mokhtari, Pozhhan and Ren, Haishen and Ebadzadeh, Touradj (2020) Concurrent sinter-crystallization and microwave dielectric characterization of CaO-MgO-TiO2-SiO2 glass-ceramics. Journal of Asian Ceramic Societies, 8 (2). pp. 234-244. ISSN 2187-0764

Kolukısa, Deniz Can and Özbulut, Murat and Peşman, Emre and Yıldız, Mehmet (2020) Development of computationally efficient augmented Lagrangian SPH for incompressible flows and its quantitative comparison with WCSPH simulating flow past a circular cylinder. International Journal for Numerical Methods in Engineering, 121 (18). pp. 4187-4207. ISSN 0029-5981 (Print) 1097-0207 (Online)

Koohestani, Babak and Darban, Ahmad Khodadadi and Mokhtari, Pozhhan and Darezereshki, Esmaeel and Yilmaz, Erol and Yilmaz, Elif (2020) Influence of hydrofluoric acid leaching and roasting on mineralogical phase transformation of pyrite in sulfidic mine tailings. Minerals, 10 (6). ISSN 2075-163X

M

Mahdikhah, V. and Ataie, A. and Babaei, A. and Sheibani, S. and Ow-Yang, Cleva W. and Khabbazabkenar, Sirous (2020) CoFe2O4/Fe magnetic nanocomposite: exchange coupling behavior and microwave absorbing property. Ceramics International, 46 (11). pp. 17903-17916. ISSN 0272-8842 (Print) 1873-3956 (Online)

Mensur-Alkoy, Ebru and Okatan, M. Barış and Aydın, Ecem and Kılıç, Yusuf and Mısırlıoğlu, Burç and Alkoy, Sedat (2020) Effect of texture on the electrical and electrocaloric properties of 0.90Pb(Mg1/3Nb2/3)O-3-0.10PbTiO(3) relaxor ceramics. Journal of Applied Physics, 128 (8). ISSN 0021-8979 (Print) 1089-7550 (Online)

N

Najib, Sumaiyah (2020) Investigation of asymmetric hybrid supercapacitor based on morphology of zinc oxide electrode materials for high energy supercapacitors. [Thesis]

Najib, Sumaiyah and Bakan, Feray and Abdullayeva, Nazrin and Bahariqushchi, Rahim and Kasap, Sibel and Franzò, Giorgia and Sankir, Mehmet and Demirci Sankir, Nurdan and Mirabella, Salvo and Erdem, Emre (2020) Tailoring morphology to control defect structures in ZnO electrodes for high-performance supercapacitor devices. Nanoscale, 12 (30). pp. 16162-16172. ISSN 2040-3364 (Print) 2040-3372 (Online)

Nicoara, Adrian Ionut and Stoica, Alexandra Elena and Vrabec, Mirijam and Smuc Rogan, Nastja and Sturm, Saso and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali and Basaran Bundur, Zeynep and Ciuca, Ion and Vasile, Bogdan Stefan (2020) End-of-life materials used as supplementary cementitious materials in the concrete industry. Materials, 13 (8). ISSN 1996-1944

P

Papila, Melih (2020) Double-double laminated skin/grid architecture in structural composite design. Project Report. Tübitak.

R

Rahimi, Mohammad Naqib (2020) Peridynamic modelling of internal features and interfaces for material toughening. [Thesis]

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2020) Numerical investigation on effective toughening mechanisms of graded composites. In: Joint Event: ICCS23 - 23rd International Conference on Composite Structures & MECHCOMP6 - 6th International Conference on Mechanics of Composites, Porto, Portugal

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes. International Journal of Mechanical Sciences, 182 . ISSN 0020-7403 (Print) 1879-2162 (Online)

Rajabalizadeh Mojarrad, Naeimeh and Sadeghi, Sahl and Yarar Kaplan, Begüm and Güler, Enver and Alkan Gürsel, Selmiye (2020) Metal-salt enhanced grafting of vinylpyridine and vinylimidazole monomer combinations in radiation grafted membranes for high-temperature PEM fuel cells. ACS Applied Energy Materials, 3 (1). pp. 532-540. ISSN 2574-0962

Roch, Tomas and Simurka, Lukas and Ow-Yang, Cleva W. and Sezen, Meltem and Satrapinskyy, Leonid and Türütoğlu, Tuncay (2020) Periodic density fluctuations in sputtered aluminum-doped silicon oxynitride layers. International Journal of Applied Glass Science, 11 (1). pp. 207-214. ISSN 2041-1286 (Print) 2041-1294 (Online)

S

Sadaghiani, Abdolali Khalili and Rajabnia, Hossein and Çelik, Süleyman and Noh, H. and Kwak, H. J. and Nejatpour, Mona and Park, Hyun Sun and Acar, H. Y. and Mısırlıoğlu, Burç and Özdemir, Mehmed Rafet and Koşar, Ali (2020) Pool boiling heat transfer of ferrofluids on structured hydrophilic and hydrophobic surfaces: the effect of magnetic field. International Journal of Thermal Sciences, 155 . ISSN 1290-0729 (Print) 1778-4166 (Online)

Salimkhani, Hamed (2020) Enhancement in ionic conductivity of Dysprosium doped Li7La3Zr2O12 solid electrolyte applied in Li-ion batteries. [Thesis]

Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Ozunlu, Burcu Girginer and Yağcı, Yavuz Emre (2020) Graphene from waste tire by recycling technique for cost-effective and light-weight automotive plastic part production. In: 35th International Conference of the Polymer Processing Society (PPS 2019), Izmir, Turkey

Semsari Parapari, Sorour (2020) Fluorination of vanadium oxy-phosphates for high-energy cathode materials of li-ion batteries. [Thesis]

Sen, Pınar and Akagündüz, Dilan and Sheibani Aghdam, Araz and Cebeci, Fevzi Çakmak and Nyokong, Tebello and Çatal, Tunç (2020) Synthesis of novel schiff base cobalt (II) and iron (III) complexes as cathode catalysts for microbial fuel cell applications. Journal of Inorganic and Organometallic Polymers and Materials, 30 (4). pp. 1110-1120. ISSN 1574-1443 (Print) 1574-1451 (Online)

Seviniş, Emine Billur (2020) Synthesis and characterization of highly branched, functional poly(arylene ether sulfone)s for water purification membranes. [Thesis]

Seyyed Monfared Zanjani, Jamal and Beylergil, Bertan and Haghighi Poudeh, Leila and Alkhateab, Baidaa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2020) Effect of nanomaterials/nanofibers on the structure and properties of fiber-reinforced composites. In: Han, Baoguo and Sharma, Sumit and Nguyen, Tuan Anh and Longbiao, Li and Bhat, K. Subrahmanya, (eds.) Fiber-Reinforced Nanocomposites: Fundamentals and Applications. Elsevier, Amsterdam, pp. 157-182. ISBN 9780128199107 (Print) 9780128199046 (Online)

Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Girginer Özünlü, Burcu and Yağcı, Yavuz Emre and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) Development of waste tire-derived graphene reinforced polypropylene nanocomposites with controlled polymer grade, crystallization and mechanical characteristics via melt-mixing. Polymer International, 69 (9). pp. 771-779. ISSN 0959-8103 (Print) 1097-0126 (Onlilne)

Sharani, Baidaa and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Rahimi, Mohammad Naqib and Haghighi Poudeh, Leila and Kefal, Adnan and Yıldız, Mehmet (2020) Damage mechanisms in CFRP/HNT laminates under flexural and in-plane shear loadings using experimental and numerical methods. Composites Part A: Applied Science and Manufacturing, 136 . ISSN 1359-835X (Print) 1878-5840 (Online)

Sheibani Aghdam, Araz (2020) Design and Engineering of Slippery Liquid-Infused Porous Surfaces by LbL Technique for Icephobic Surfaces and Hydrodynamic Cavitation. [Thesis]

Sheibani Aghdam, Araz and Cebeci, Fevzi Çakmak (2020) Tailoring the icephobic performance of slippery liquid-infused porous surfaces through the LbL method. Langmuir, 36 (46). pp. 14145-14154. ISSN 0743-7463 (Print) 1520-5827 (Online)

Simsek Franci, Gulsu and Akkaş Mohammadmoradi, Tuğçe and Yildirim, Sinem and Yilmaz, Suat and Birdevrim, Ahmet Nejat (2020) Characterization of a Jian-like sherd with the optical microscope, confocal Raman, wavelength-dispersive X-ray fluorescence, and portable XRF spectrometers. Journal of Raman Spectroscopy, 51 (8). pp. 1343-1352. ISSN 0377-0486 (Print) 1097-4555 (Online)

Sohouli, Abdol Rasoul and Kefal, Adnan and Abdelhamid, Ahmed and Yıldız, Mehmet and Suleman, Afzal (2020) Continuous density-based topology optimization of cracked structures using peridynamics. Structural and Multidisciplinary Optimization, 62 (5). pp. 2375-2389. ISSN 1615-147X (Print) 1615-1488 (Online)

T

Talebian Gevari, Moein and Abbasiasl, Taher and Niazi, Soroush and Ghorbani, Morteza and Koşar, Ali (2020) Direct and indirect thermal applications of hydrodynamic and acoustic cavitation: a review. Applied Thermal Engineering, 171 . ISSN 1359-4311

Talebian Gevari, Moein and Parlar, Ayhan and Torabfam, Milad and Koşar, Ali and Yüce, Meral and Ghorbani, Morteza (2020) Influence of fluid properties on intensity of hydrodynamic cavitation and deactivation of salmonella typhimurium. Processes, 8 (3). ISSN 2227-9717

Taş, Cüneyt Erdinç and Karaoğlu, Öznur and Alkan Taş, Buket and Ertaş, Erdal and Ünal, Hayriye and Bildirir, Hakan (2020) Improved latent heat storage properties through mesopore enrichment of a zeolitic shape stabilizer. Solar Energy Materials and Solar Cells, 216 . ISSN 0927-0248 (Print) 1879-3398 (Online)

Taş, Cüneyt Erdinç and Seviniş Özbulut, Emine Billur and Çeven, Ömer Faruk and Alkan Taş, Buket and Ünal, Serkan and Ünal, Hayriye (2020) Purification and sorting of halloysite nanotubes into homogeneous, agglomeration-free fractions by polydopamine functionalization. ACS Omega, 5 (29). pp. 17962-17972. ISSN 2470-1343

Taşdelen, Melih Can (2020) CMOS-Compatible scalable microfabrication of graphene polymeric strain gauge arrays. [Thesis]

Taşdemir, Adnan (2020) Development of metal&metal oxides decorated graphene-based electrode materials for next generation LI-ION LI-O2 batteries. [Thesis]

Toufani, Maryam (2020) Synergy of Nano-ZnO and 3D-Graphene Foam Electrodes for Asymmetric Supercapacitor Devices. [Thesis]

Toufani, Maryam and Kasap, Sibel and Tufani, Ali and Bakan, Feray and Weber, Stefan and Erdem, Emre (2020) Synergy of nano-ZnO and 3D-graphene foam electrodes for asymmetric supercapacitor devices. Nanoscale, 12 (24). pp. 12790-12800. ISSN 2040-3364 (Print) 2040-3372 (Online)

U

Uzun, Y. and Gürbüz, İrem and De Jong, M. P. and Van Der Wiel, W. G. (2020) Surface acoustic waves as a sensitive probe for photoresponsive polarization memory in SrTiO3. Journal of Physics D: Applied Physics, 53 (33). ISSN 0022-3727 (Print) 1361-6463 (Online)

Y

Yılmaz, Çağatay and Topal, Serra and Ali, Hafiz Qasim and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Suleman, Afzal and Yıldız, Mehmet (2020) Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave. Composite Structures, 237 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Yiğitalp, Ayça and Taşdemir, Adnan and Alkan Gürsel, Selmiye and Yürüm, Alp (2020) Nafion-coated LiNi0.80Co0.15Al0.05O2(NCA) cathode preparation and its influence on the Li-ion battery cycle performance. Energy Storage . ISSN 2578-4862 Published Online First http://dx.doi.org/10.1002/est2.154

Yurduşen, Aysu (2020) Hierarchical porous metal-organic frameworks (MOFS): design, synthesis, and their application as gas adsorption materials. [Thesis]

Yurduşen, Aysu and Yürüm, Alp and Yürüm, Yuda (2020) A remarkable increase in the adsorbed H-2 amount: influence of pore size distribution on the H-2 adsorption capacity of Fe-BTC. International Journal of Hydrogen Energy, 45 (22). pp. 12394-12407. ISSN 0360-3199 (Print) 1879-3487 (Online)

Yurduşen, Aysu and Yürüm, Alp and Yürüm, Yuda (2020) Engineering MIL-88B crystallites for enhanced H2 uptake capacity: the role of ultramicropores. lnternational Journal of Energy Research, 44 (4). pp. 2875-2888. ISSN 0363-907X (Print) 1099-114X (Online)

Yurduşen, Aysu and Yürüm, Alp and Yürüm, Yuda (2020) The role of ultramicropores in the CO2 adsorption capacity of Fe-BTC crystallites synthesized with a perturbation-assisted nanofusion synthesis strategy. CrystEngComm, 22 (5). pp. 932-944. ISSN 1466-8033

Z

Zaman, Ali Can and Kaya, Figen and Kaya, Cengiz (2020) A study on optimum surfactant to multiwalled carbon nanotube ratio in alcoholic stable suspensions via UV-Vis absorption spectroscopy and zeta potential analysis. Ceramics International, 46 (18). pp. 29120-29129. ISSN 0272-8842

Zemberekçi, Lyn (2020) Rheological control of reactive and nonreactive particles. [Thesis]

Zeybek, Mehmet Can and Acar, Egemen and Özaydın İnce, Gözde (2020) Stimuli-responsive polymers with tunable release kinetics. In: Parlak, Onur, (ed.) Switchable Bioelectronics. Jenny Stanford Publishing, New york. ISBN 9781003056003

Ç

Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Seyyed Monfared Zanjani, Jamal and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) New hybrid nano additives for thermoplastic compounding: CVD grown carbon fiber on graphene. In: 35th International Conference of the Polymer Processing Society (PPS), Izmir, Turkey

Çolak, Oğuzhan (2020) Multiscale modelling of squid inspired tandem repeat proteins. [Thesis]

Ö

Özbulut, Murat and Ramezanzadeh, Shayan and Yıldız, Mehmet and Gören, Ömer (2020) Modelling of wave generation in a numerical tank by SPH method. Journal of Ocean Engineering and Marine Energy, 6 (2). pp. 121-136. ISSN 2198-6444 (Print) 2198-6452 (Online)

Ş

Şengül, Esra and Elitaş, Meltem (2020) Single-cell mechanophenotyping in microfluidics to evaluate behavior of U87 glioma cells. Micromachines, 11 (9). ISSN 2072-666X

This list was generated on Wed Jun 19 07:07:59 2024 +03.