Items where Division is "Integrated Manufacturing Technologies Research and Application Center" and Year is 2022

A

Abdollahzadeh, Mohammadamin and Ali, Hafiz Qasim and Yıldız, Mehmet and Kefal, Adnan (2022) Experimental and numerical investigation on large deformation reconstruction of thin laminated composite structures using inverse finite element method. Thin-Walled Structures, 178 . ISSN 0263-8231 (Print) 1879-3223 (Online)

Afghah, Seyedeh Ferdows and Iyison, Necla Birgul and Nadernezhad, Ali and Midi, Ahmet and Sen, Ozlem and Saner Okan, Burcu and Çulha, Mustafa and Koç, Bahattin (2022) 3D fiber reinforced hydrogel scaffolds by melt electrowriting and gel casting as a hybrid design for wound healing. Advanced Healthcare Materials, 11 (11). ISSN 2192-2640 (Print) 2192-2659 (Online)

Aghajani, Hossein and Taghizadeh Tabrizi, Arvin and Ghorbani, Reza and Behrangi, Sahand and Stupavska, Monika and Abdian, Nesa (2022) Evaluation of electrochemical hydrogen storage capability of three-dimensional nano-structured nitrogen-doped graphene. Journal of Alloys and Compounds, 906 . ISSN 0925-8388 (Print) 1873-4669 (Online)

Aktürk, Merve and Toufani, Maryam and Tufani, Ali and Erdem, Emre (2022) ZnO and reduced graphene oxide electrodes for all-in-one supercapacitor devices. Nanoscale, 14 (8). pp. 3269-3278. ISSN 2040-3364 (Print) 2040-3372 (Online)

Ali, Hafiz Qasim and Yilmaz, Çağatay and Yıldız, Mehmet (2022) The effect of different tabbing methods on the damage progression and failure of carbon fiber reinforced composite material under tensile loading. Polymer Testing, 111 . ISSN 0142-9418 (Print) 1873-2348 (Online)

Alkan Taş, Buket and Berksun, Ekin and Taş, Cüneyt Erdinç and Ünal, Serkan and Ünal, Hayriye (2022) Lysostaphin-functionalized waterborne polyurethane/polydopamine coatings effective against S. aureus biofilms. ACS Applied Polymer Materials, 4 (6). pp. 4298-4305. ISSN 2637-6105

Alkan Taş, Buket and Berksun, Ekin and Taş, Cüneyt Erdinç and Ünal, Serkan and Ünal, Hayriye (2022) NIR-responsive waterborne polyurethane-polydopamine coatings for light-driven disinfection of surfaces. Progress in Organic Coatings, 164 . ISSN 0300-9440 (Print) 1873-331X (Online)

Altaf, Çiğdem Tuc and Rostas, Arpad Mihai and Mihet, Maria and Lazar, Mihaela Diana and Iatsunskyi, Igor and Coy, Emerson and Erdem, Emre and Sankir, Mehmet and Sankir, Nurdan Demirci (2022) Solar-assisted all-solid supercapacitors using composite nanostructures of ZnO nanowires with GO and rGO. Journal of Materials Chemistry C, 10 (29). pp. 10748-10758. ISSN 2050-7526 (Print) 2050-7534 (Online)

Apak, Mustafa Yurdabal and Ergun, Murat and Ozen, Halit and Büyük, Murat and Ozcanan, Sedat and Atahan, Ali Osman and Yumrutas, Halil Ibrahim (2022) Finite element simulation and failure analysis of fixed bollard system according to the PAS 68:2013 standard. Engineering Failure Analysis, 135 . ISSN 1350-6307 (Print) 1873-1961 (Online)

Arıkan, Muhammed Hasan and Eroğlu, Fatih and Eskizeybek, Volkan and Şükür, Emine Feyza and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) A systematic characterization approach for vacuum bag only prepregs towards an accurate process design. Materials, 15 (2). ISSN 1996-1944

Aydogan, E. and El-Atwani, O. and Erdem, B. and Chen, W. Y. and Li, M. and Devaraj, A. and Koç, Bahattin and Maloy, S. A. (2022) In-situ radiation response of additively manufactured modified Inconel 718 alloys. Additive Manufacturing, 51 . ISSN 2214-8604 (Print) 2214-7810 (Online)

B

Bagherzadeh, Amin and Koç, Bahattin and Budak, Erhan and Işık, Murat (2022) High-speed machining of additively manufactured Inconel 718 using hybrid cryogenic cooling methods. Virtual and Physical Prototyping, 17 (3). pp. 419-436. ISSN 1745-2759 (Print) 1745-2767 (Online)

Balanji, Hamid Majidi and Turgut, Ali Emre and Tunç, Lütfi Taner (2022) A novel vision-based calibration framework for industrial robotic manipulators. Robotics and Computer Integrated Manufacturing, 73 . ISSN 0736-5845 (Print) 1879-2537 (Online)

Barzegar Osgouei, Ali and Karimi, Sasan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2022) Investigating the effect of ply orientation on the surface thermal history of newly placed tape during thermoplastic composite manufacturing with lafp process. In: 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Lausanne

Başkan, Havva and Karakaş, Hale (2022) Suitability of electrospun nanofibers for specialized biomedical applications. In: Vaseashta, Ashok and Bölgen, Nimet, (eds.) Electrospun Nanofibers: Principles, Technology and Novel Applications. Springer International Publishing, Switzerland, pp. 183-206. ISBN 9783030999575 (Print) 9783030999582 (Online)

Başoğlu, Muhammed Fatih and Kefal, Adnan and Zerin, Zihni and Oterkus, Erkan (2022) Peridynamic modeling of toughening enhancement in unidirectional fiber-reinforced composites with micro-cracks. Composite Structures, 297 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Bayraktar, Can and Demir, Eralp (2022) A thermomechanical finite element model and its comparison to inherent strain method for powder-bed fusion process. Additive Manufacturing, 54 . ISSN 2214-8604 (Print) 2214-7810 (Online)

Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Ünal, Serkan and Dızman, Bekir (2022) Synthesis and structure-property relationship of amphiphilic poly(2-ethyl- co-2-(alkyl/aryl)-2-oxazoline) copolymers. ACS Omega, 7 (44). pp. 40067-40077. ISSN 2470-1343

Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner and Gönül, Bora (2022) Development of a vision based pose estimation system for robotic machining and improving its accuracy using LSTM neural networks and sparse regression. Robotics and Computer Integrated Manufacturing, 74 . ISSN 0736-5845 (Print) 1879-2537 (Online)

Bilici, Çiğdem and Tatar, Asena Gülenay and Şentürk, Efsun and Dikyol, Caner and Koç, Bahattin (2022) Bisulfite-initiated crosslinking of gelatin methacryloyl hydrogels for embedded 3D bioprinting. Biofabrication, 14 (2). ISSN 1758-5082 (Print) 1758-5090 (Online)

C

Candau, Nicolas and Vives, Eduard and Fernández, Ana Inés and Oğuz, Oğuzhan and Corvec, Guillaume and Federico, Carlos Eloy and Fernandes, João Paulo Cosas and Stoclet, Gregory and Maspoch, Maria Lluïsa (2022) Observation of heterogeneities in elastocaloric natural/wastes rubber composites. Express Polymer Letters, 16 (12). pp. 1331-1347. ISSN 1788-618X

Celep, M. and Hadjadj, A. and Shadloo, M. S. and Sharma, S. and Yıldız, Mehmet and Kloker, M. J. (2022) Effect of streak employing control of oblique-breakdown in a supersonic boundary layer with weak wall heating/cooling. Physical Review Fluids, 7 (5). ISSN 2469-990X

D

Daskalakis, Evangelos and Huang, Boyang and Vyas, Cian and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bartolo, Paulo (2022) Novel 3D bioglass scaffolds for bone tissue regeneration. Polymers, 14 (3). ISSN 2073-4360

Daskalakis, Evangelos and Huang, Boyang and Vyas, Cian and Acar, Anıl Ahmet and Liu, Fengyuan and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2022) Bone bricks: the effect of architecture and material composition on the mechanical and biological performance of bone scaffolds. ACS Omega, 7 (9). pp. 7515-7530. ISSN 2470-1343

Demir, Eralp and Şaş Çaycı, Hatice Sinem and Işık, Murat and Gungor, Eda Aydogan and Davut, Kemal (2022) A numerical methodology for monitoring stress distributions and experimental proof of the concept on metal embedded thin polymer-matrix composites using x-ray diffraction. Thin-Walled Structures, 173 . ISSN 0263-8231 (Print) 1879-3223 (Online)

Dericiler, Kuray and Aliyeva, Nargiz and Mohammadjafari Sadeghi, Hadi and Şaş Çaycı, Hatice Sinem and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2022) Graphene in automotive parts. In: Song, Huaihe and Nguyen, Tuan Anh and Yasin, Ghulam and Singh, Nakshatra Bahadur and Gupta, Ram K., (eds.) Nanotechnology in the Automotive Industry. Micro and Nano Technologies. Elsevier, UK, pp. 623-651. ISBN 978-0-323-90524-4

Dericiler, Kuray and Berktaş, İlayda and Doğan, Semih and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2022) General techniques for recovery of nanomaterials from wastes. In: Rai, Mahendra and Nguyen, Tuan Anh, (eds.) Nanomaterials Recycling. Elsevier, pp. 147-174. ISBN 9780323909822

Dörtkaşlı, Kerem and Işık, Murat and Demir, Eralp (2022) A thermal finite element model with efficient computation of surface heat fluxes for directed-energy deposition process and application to laser metal deposition of IN718. Journal of Manufacturing Processes, 79 . pp. 369-382. ISSN 1526-6125 (Print) 2212-4616 (Online)

E

Elmas, Sinem and Şaş Çaycı, Hatice Sinem (2022) Thermally exfoliated graphene oxide (TEGO) reinforced fast-cure epoxy resin: cure behavior and flexural properties. Erciyes Üniversitesi Fen Bilimleri Enstitüsü Fen Bilimleri Dergisi, 38 (2). pp. 168-179. ISSN 1012-2354

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet (2022) Damage growth and failure detection in hybrid fiber composites using experimental in-situ optical strain measurements and smoothing element analysis. International Journal of Damage Mechanics, 31 (4). pp. 479-507. ISSN 1056-7895 (Print) 1530-7921 (Online)

Emami Tabrizi, Isa and Öz, Fatih Ertuğrul and Seyyed Monfared Zanjani, Jamal and Mandal, Sefa Kemal and Yıldız, Mehmet (2022) Failure sequence determination in sandwich structures using concurrent acoustic emission monitoring and postmortem thermography. Mechanics of Materials, 164 . ISSN 0167-6636 (Print) 1872-7743 (Online)

F

Fallah, Ali and Altunbek, Mine and Bartolo, Paulo and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin (2022) 3D printed scaffold design for bone defects with improved mechanical and biological properties. Journal of the Mechanical Behavior of Biomedical Materials, 134 . ISSN 1751-6161 (Print) 1878-0180 (Online)

G

Ghasemzadeh, Maryam and Kefal, Adnan (2022) Sensor placement optimization for shape sensing of plates and shells using genetic algorithm and inverse finite element method. Sensors, 22 (23). ISSN 1424-8220

Ghasemzadeh, Maryam and Mokhtari, Mojtaba and Kefal, Adnan (2022) Localized corrosion damage prediction of steel plates in marine applications using quadrilateral inverse-shell elements based on iFEM. In: 19th International Congress of the International Maritime Association of the Mediterranean (IMAM 2022), Istanbul, Turkey

Girişken, Çağla and Avaz, Merve Senem and Ersoy, Osman Gökhan and Menceloğlu, Yusuf Z. (2022) Development and performance evaluation of cool black surface on thermoplastic polyolefins via incorporation of non-near infrared absorptive pigments. Journal of Applied Polymer Science, 139 (44). ISSN 0021-8995 (Print) 1097-4628 (Online)

Guiton, Mélanie and Suárez-Montes, David and Sánchez, Rubén and Baustert, Paul and Soukoulis, Christos and Saner Okan, Burcu and Serchi, Tommaso and Cambier, Sébastien and Benetto, Enrico (2022) Comparative life cycle assessment of a microalgae-based oil metal working fluid with its petroleum-based and vegetable-based counterparts. Journal of Cleaner Production, 338 . ISSN 0959-6526 (Print) 1879-1786 (Online)

Gul, Saher and Tabrizi, Isa Emami and Saner Okan, Burcu and Yıldız, Mehmet and Kefal, Adnan (2022) Effect of hybridization on the failure mechanisms of thin/thick hybrid carbon/glass fiber-reinforced composites under flexural loading. In: 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Lausanne

Güçlü, Serkan and Kızıldağ, Nuray and Dızman, Bekir and Ünal, Serkan (2022) Solvent-based recovery of high purity polysulfone and polyester from end-of-life reverse osmosis membranes. Sustainable Materials and Technologies, 31 . ISSN 2214-9937

Güz, Seher and Aktürk, Merve and Göçmez, Hasan and Erdem, Emre (2022) All-in-one electric double layer supercapacitors based on CH3NH3PbI3 perovskite electrodes. ACS Omega, 7 (50). pp. 47306-47316. ISSN 2470-1343

H

Hadji, Lazreg and Fallah, Ali and Aghdam, Mohammad Mohammadi (2022) Influence of the distribution pattern of porosity on the free vibration of functionally graded plates. Structural Engineering and Mechanics, 82 (2). pp. 151-161. ISSN 1225-4568 (Print) 1598-6217 (Online)

Hasim, K. A. and Kefal, Adnan (2022) A novel isogeometric layerwise element for piezoelectric analysis of laminated plates with straight/curvilinear fibers. Computer Methods in Applied Mechanics and Engineering, 399 . ISSN 0045-7825 (Print) 1879-2138 (Online)

Hezarkhani, Marjan and Aliyeva, Nargiz and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2022) Fabrication methodologies of multi-layered and multi-functional electrospun structures by co-axial and multi-axial electrospinning techniques. In: Vaseashta, Ashok and Bölgen, Nimet, (eds.) Electrospun Nanofibers: Principles, Technology and Novel Applications. Springer Cham, Switzerland, pp. 35-66. ISBN 978-3-030-99957-5 (Print) 978-3-030-99958-2 (Online)

Hezarkhani, Marjan and Wis, Abdulmounem Alchek and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2022) Nanomaterials recycling in industrial applications. In: Rai, Mahendra and Nguyen, Tuan Anh, (eds.) Nanomaterials Recycling. Elsevier, pp. 375-395. ISBN 9780323909822

I

Iglesias, Alexander and Tunç, Lütfi Taner and Özsahin, Orkun and Franco, Oier and Munoa, Jokin and Budak, Erhan (2022) Alternative experimental methods for machine tool dynamics identification: a review. Mechanical Systems and Signal Processing, 170 . ISSN 0888-3270 (Print) 1096-1216 (Online)

K

Karimi, Sasan and Barzegar Osgouei, Ali and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) Parametric study of afp lay-up process parameters effect on the air permeability of thermoplastic composites and their suitability for out of autoclave post-processing by a new method. In: 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Lausanne

Kefal, Adnan and Diyaroğlu, Çağan and Yıldız, Mehmet and Oterkus, Erkan (2022) Coupling of peridynamics and inverse finite element method for shape sensing and crack propagation monitoring of plate structures. Computer Methods in Applied Mechanics and Engineering, 391 . ISSN 0045-7825 (Print) 1879-2138 (Online)

Kendibilir, Abdullah and Kefal, Adnan and Sohouli, A. and Yıldız, Mehmet and Koç, Bahattin and Suleman, A. (2022) Peridynamics topology optimization of three-dimensional structures with surface cracks for additive manufacturing. Computer Methods in Applied Mechanics and Engineering, 401 (Part B). ISSN 0045-7825 (Print) 1879-2138 (Online)

Kheyabani, Aryan and Massarwa, Eyass and Kefal, Adnan (2022) Multiscale structural analysis of thick sandwich structures using parametric HFGMC micromechanics and isogeometric plate formulation based on refined zigzag theory. Composite Structures, 297 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Kori, Serra and Güzeldağ, Berna and Kızıldağ, Nuray and Uğur, Gokce and Koldemir, Unsal and Dızman, Bekir and Ünal, Serkan (2022) An investigation on the efficiency of the catalyst systems used in the chemical recycling of PET. In: 11th International Fiber and Polymer Research Symposium, Gebze, Kocaeli

M

Maleki-Ghaleh, H. and Shakeri, M. S. and Dargahi, Z. and Kavanlouei, M. and Kaveh Garabagh, H. and Moradpur-Tari, E. and Yourdkhani, A. and Fallah, Ali and Zarrabi, A. and Koç, Bahattin and Siadati, M. H. (2022) Characterization and optical properties of mechanochemically synthesized molybdenum-doped rutile nanoparticles and their electronic structure studies by density functional theory. Materials Today Chemistry, 24 . ISSN 2468-5194

Malgueiro, Regina and Durães, Nelson and Teixiera, Paulo and Cunha, Américo and Valério, Rita and Peliteiro, Bruno and Kızıldağ, Nuray and Ünal, Serkan and Güçlü, Serkan (2022) Functional fibers based on recycled PP from home textiles. Chemical Fibers International, 72 (3). pp. 127-129. ISSN 1434-3584

Malgueiro, Regina and Durães, Nelson and Teixiera, Paulo and Cunha, Americo and Valerio, Rita and Peliteiro, Bruno and Kızıldağ, Nuray and Ünal, Serkan and Güçlü, Serkan (2022) Functional fibers based on recycled PP from home textiles. Melliand International, 28 (4). pp. 170-172. ISSN 0947-9163

Menceloğlu, Yeşim and Menceloğlu, Yusuf Z. and Seven, Senem Avaz (2022) Triblock superabsorbent polymer nanocomposites with enhanced water retention capacities and rheological characteristics. ACS Omega, 7 (24). pp. 20486-20494. ISSN 2470-1343

O

Ormancı-Acar, Türkan and Korkut, Sevde and Keskin, Basak and Ağtaş, Meltem and Taş, Cüneyt Erdinç and Mutlu-Salmanlı, Öykü and Türken, Türker and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2022) Combining S-DADPS monomer and halloysite nanotube for fabrication superior nanofiltration membrane. Polymer, 255 . ISSN 0032-3861 (Print) 1873-2291 (Online)

Ozbulut, M. and Olmez, O. and Kolukısa, Deniz Can and Deliktas-Ozdemir, E. and Goren, O. and Yıldız, Mehmet (2022) An investigation into the nonlinear effects in the roll motion of 2-D bodies by SPH method. Ocean Engineering, 248 . ISSN 0029-8018 (Print) 1873-5258 (Online)

R

Rahimi, Mohammad Naqib and Kolukısa, Deniz Can and Yıldız, Mehmet and Ozbulut, Murat and Kefal, Adnan (2022) A generalized hybrid smoothed particle hydrodynamics-peridynamics algorithm with a novel Lagrangian mapping for solution and failure analysis of fluid-structure interaction problems. Computer Methods in Applied Mechanics and Engineering, 389 . ISSN 0045-7825 (Print) 1879-2138 (Online)

Ramezanzadeh, Shayan and Özbulut, Murat and Yıldız, Mehmet (2022) A numerical investigation of the energy efficiency enhancement of oscillating water column wave energy converter systems. Energies, 15 (21). ISSN 1996-1073

Rashed, Ali and Demir, Eralp (2022) Design of variable stiffness composites for maximum fundamental frequency considering manufacturing constraints of tow steering. Composite Structures, 284 . ISSN 0263-8223 (Print) 1879-1085 (Online)

S

Saffarimiandoab, Farzin and Gul, Bahar Yavuzturk and Tasdemir, Reyhan Sengur and Mutlu, Borte Kose and Erkoç İlter, Selda and Ünal, Serkan and Tunaboylu, Bahadir and Menceloğlu, Yusuf Z. and Vatanpour, Vahid and Koyuncu, Ismail (2022) Mechanisms, diagnosis, and monitoring of biofouling in membrane processes: a review. Desalination and Water Treatment, 247 . pp. 40-63. ISSN 1944-3994 (Print) 1944-3986 (Online)

Saghatchi, Roozbeh and Yıldız, Mehmet and Doostmohammadi, Amin (2022) Nematic order condensation and topological defects in inertial active nematics. Physical Review E, 106 (1). ISSN 2470-0045 (Print) 2470-0053 (Online)

Salamatgharamaleki, Saeed and Ateşpare, Asu Ece and Kohlan, Taha Behroozi and Ünal, Serkan and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Dızman, Bekir (2022) Synthesis and characterization of hydrolyzed polyoxazolines and investigation of their curing capabilities. In: 5th International Eurasian Conference on Biological and Chemical Sciences (EurasianBioChem 2022), Ankara, Turkey

Sharabati, J. A.D. and Erkoç İlter, Selda and Güçlü, Serkan and Koseoglu-Imer, D. Y. and Ünal, Serkan and Menceloğlu, Yusuf Z. and Ozturk, I. and Koyuncu, I. (2022) Zwitterionic polysiloxane-polyamide hybrid active layer for high performance and chlorine resistant TFC desalination membranes. Separation and Purification Technology, 282 (Part A). ISSN 1383-5866 (Print) 1873-3794 (Online)

T

Taghizadeh Tabrizi, Arvin and Aghajani, Hossein and Mirzapour, Pouya (2022) Estimation of the effect of process parameters of plasma nitriding on the surface hardness and corrosion behaviour of pure titanium by artificial neuron network. Journal of the Balkan Tribological Association, 28 (5). pp. 597-612. ISSN 1310-4772

U

Ulus, Hasan (2022) An experimental assessment of hybrid bolted/bonded basalt fiber reinforced polymer composite joints' temperature-dependent mechanical performances by static and dynamic mechanical analyses. International Journal of Adhesion and Adhesives, 114 . ISSN 0143-7496 (Print) 1879-0127 (Online)

Ulus, Hasan and Kaybal, Halil Burak and Cacık, Fatih and Eskizeybek, Volkan and Avcı, Ahmet (2022) Effect of long-term stress aging on aluminum-BFRP hybrid adhesive joint's mechanical performance: static and dynamic loading scenarios. Polymer Composites, 43 (8). pp. 5301-5318. ISSN 0272-8397 (Print) 1548-0569 (Online)

Ulus, Hasan and Kaybal, Halil Burak and Cacık, Fatih and Eskizeybek, Volkan and Avcı, Ahmet (2022) Fracture and dynamic mechanical analysis of seawater aged aluminum-BFRP hybrid adhesive joints. Engineering Fracture Mechanics, 268 . ISSN 0013-7944 (Print) 1873-7315 (Online)

V

Van de Voorde, Babs and Sensu, Berna and De Vos, Lobke and Colenbier, Robin and Başkan, Havva and Geltmeyer, Jozefien and Parmentier, Laurens and Van Daele, Lenny and Dmitriev, Ruslan I. and Pyl, Lincy and De Clerck, Karen and Van Vlierberghe, Sandra (2022) Electrospinning of poly(decamethylene terephthalate) to support vascular graft applications. European Polymer Journal, 165 . ISSN 0014-3057 (Print) 1873-1945 (Online)

Y

Yıldırım, Ferhat and Kabakçı, Elif and Şaş Çaycı, Hatice Sinem and Eskizeybek, Volkan (2022) Multi-walled carbon nanotube grafted 3D spacer multi-scale composites for electromagnetic interference shielding. Polymer Composites, 43 (8). pp. 5690-5703. ISSN 0272-8397 (Print) 1548-0569 (Online)

Z

Zhao, Feifei and Kefal, Adnan and Bao, Hong (2022) Nonlinear deformation monitoring of elastic beams based on isogeometric iFEM approach. International Journal of Non-Linear Mechanics, 147 . ISSN 0020-7462 (Print) 1878-5638 (Online)

Ü

Ünal, Serkan and Kızıldağ, Nuray and Güçlü, Serkan and Dızman, Bekir and Menceloğlu, Yusuf Z. (2022) Sustainability for polymeric fibers and textiles. In: 11th International Fiber and Polymer Research Symposium, Gebze, Kocaeli

Ş

Şahin, Zeynep Munteha and Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Ünal, Serkan and Dızman, Bekir (2022) Polyoxazoline-modified graphene oxides with improved water and epoxy resin dispersibility and stability towards composite applications. Journal of Applied Polymer Science, 139 (25). ISSN 0021-8995 (Print) 1097-4628 (Online)

Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) A rational study on the hydrothermal aging of AFP manufactured CF/polyetherketoneketone composites with in situ consolidation supported by acoustic emission inspection. Journal of Applied Polymer Science, 139 (29). ISSN 0021-8995 (Print) 1097-4628 (Online)

Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) Effects of meso- and micro-scale defects on hygrothermal aging behavior of glass fiber reinforced composites. Polymer Composites, 43 (11). pp. 8396-8408. ISSN 0272-8397 (Print) 1548-0569 (Online)