Items where Division is "Mechatronics" and Year is 2016

Article

Acer, Merve and Şabanoviç, Asif (2016) Design, kinematic modeling and sliding mode control with sliding mode observer of a novel 3-PRR compliant mechanism. Advanced Robotics (SI), 30 (17-18). pp. 1228-1242. ISSN 0169-1864 (Print) 1568-5535 (Online)

Aksu, Burak and Çelebi, Ceren and Budak, Erhan (2016) An experimental investigation of oblique cutting mechanics. Machining Science and Technology, 20 (3). pp. 495-521. ISSN 1091-0344 (Print) 1532-2483 (Online)

Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa (2016) A new visual tracking method for the analysis and characterization of jet flow. Flow Measurement and Instrumentation . ISSN 0955-5986 (Print) 1873-6998 (Online) Published Online First http://dx.doi.org/10.1016/j.flowmeasinst.2016.08.005

Baran, Abdurrahman Eray and Kuzu, Ahmet and Boğosyan, Seta and Gökaşan, Metin and Şabanoviç, Asif (2016) Comparative analysis of a selected DCT-based compression scheme for haptic data transmission. IEEE Transactions on Industrial Informatics, 12 (3). pp. 1146-1155. ISSN 1551-3203 (Print) 1941-0050 (Online)

Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih (2016) Sound-tracking of failure events in cross-ply composite laminates under tension. Composite Structures, 153 . pp. 421-427. ISSN 0263-8223 (Print) 1879-1085 (Online)

Budak, Erhan and Özlü, Emre and Bakioğlu, Hayri and Barzegar Osgouei, Zahra (2016) Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces. CIRP Annals - Manufacturing Technology, 65 (1). pp. 121-124. ISSN 0007-8506 (Print) 1726-0604 (Online)

Çomak, Alptunç and Budak, Erhan (2016) Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability. (Accepted)

Demir, Eralp (2016) 3D suspension characterization of a rapid transit vehicle using a multi-body dynamic model. Urban Rail Transit, 2 (3-4). pp. 172-187. ISSN 2199-6687 (Print) 2199-6679 (Online)

Elitaş, Meltem and Dhar, Neeraj and Schneider, Katrin and Valero, Ana and Braschler, Thomas and McKinney, John and Renaud, Philippe (2016) Dielectrophoresis as a single cell characterization method for bacteria. (Accepted)

Elitaş, Meltem and Zeinali, Soheila (2016) Modeling and simulation of EGF-CSF-1 pathway to investigate Glioma - Macrophage interaction in brain tumors. International Journal of Cancer Studies & Research (IJCR): Special Issue On "Advances in Brain Cancer Research", 5 . pp. 1-8. ISSN 2167-9118

Erdem, Esra and Patoğlu, Volkan and Schüller, Peter (2016) A systematic analysis of levels of integration between high-level task planning and low-level feasibility checks. AI Communications, 29 (2). pp. 319-349. ISSN 0921-7126 (Print) 1875-8452 (Online)

Erdoğan, Ahmetcan and Çelebi, Beşir and Satıcı, Aykut Cihan and Patoğlu, Volkan (2016) AssistOn-Ankle: a reconfigurable ankle exoskeleton with series-elastic actuation. Autonomous Robots . ISSN 0929-5593 (Print) 1573-7527 (Online) Published Online First http://dx.doi.org/10.1007/s10514-016-9551-7

Ghorbani, Morteza and Akbarpour, Sasan (2016) The multi-zone model of the low heat rejection engine for DI diesel injection engines. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38 (2). pp. 365-375. ISSN 1678-5878 (Print) 1806-3691 (Online)

Ghorbani, Morteza and Alcan, Gökhan and Ünel, Mustafa and Gözüaçık, Devrim and Ekici, Sinan and Üvet, Hüseyin and Şabanoviç, Asif and Koşar, Ali (2016) Visualization of microscale cavitating flow regimes via particle shadow sizing imaging and vision based estimation of the cone angle. Experimental Thermal and Fluid Science, 78 . pp. 322-333. ISSN 0894-1777 (Print) 1879-2286 (Online) Published Online First http://dx.doi.org/10.1016/j.expthermflusci.2016.04.026

Ghorbani, Morteza and Oral, Özlem and Ekici, Sinan and Gözüaçık, Devrim and Koşar, Ali (2016) Review on lithotripsy and cavitation in urinary stone therapy. IEEE Reviews in Biomedical Engineering, 9 . pp. 264-283. ISSN 1937-3333 (Print) 1941-1189 (Online)

Ghorbani, Morteza and Yıldız, Mehmet and Gözüaçık, Devrim and Koşar, Ali (2016) Cavitating nozzle flows in micro- and minichannels under the effect of turbulence. Journal of Mechanical Science and Technology, 30 (6). pp. 2565-2581. ISSN 1738-494X (Print) 1976-3824 (Online)

Hashlamon, Iyad and Erbatur, Kemalettin (2016) An improved real-time adaptive Kalman filter with recursive noise covariance updating rules. Turkish Journal of Electrical Engineering & Computer Sciences, 24 (2). pp. 524-540. ISSN 1300-0632 (Print) 1303-6203 (Online)

Hashlamon, Iyad and Erbatur, Kemalettin (2016) Joint friction estimation for walking bipeds. Robotica, 34 (7). pp. 1610-1629. ISSN 0263-5747 (Print) 1469-8668 (Online)

Janipour, Mohsen and Mısırlıoğlu, Burç and Şendur, Kürşat (2016) Tunable surface plasmon and phonon polariton interactions for moderately doped semiconductor surfaces. Scientific Reports, 6 . ISSN 2045-2322

Janipour, Mohsen and Şendur, Kürşat (2016) Optical transmission enhancement of stacked plasmonic apertures. Journal of Lightwave Technology, 34 (3). pp. 961-968. ISSN 0733-8724 (Print) 1558-2213 (Online)

Janipour, Mohsen and Şendur, Kürşat (2016) Theoretical model for optical properties of symmetric trimer nanoholes in a gold film. Journal of the Optical Society of America B, 33 (8). pp. 1627-1634. ISSN 0740-3224 (Print) 1520-8540 (Online)

Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2016) Effects of tool axis offset in turn-milling process. Journal of Materials Processing Technology, 231 . pp. 239-247. ISSN 0924-0136

Karimzadehkhouei, Mehrdad and Ghorbani, Morteza and Sezen, Meltem and Şendur, Kürşat and Mengüç, M. Pınar and Leblebici, Yusuf and Koşar, Ali (2016) Increasing the stability of nanofluids with cavitating flows in micro orifices. Applied Physics Letters, 109 (10). pp. 247-251. ISSN 0003-6951 (Print) 1077-3118 (Online)

Khalili Sadaghiani, Abdolali and Koşar, Ali (2016) Numerical and experimental investigation on the effects of diameter and length on high mass flux subcooled flow boiling in horizontal microtubes. International Journal of Heat and Mass Transfer, 92 . pp. 824-837. ISSN 0017-9310 (Print) 1879-2189 (Online)

Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2016) Numerical modeling of convective heat transfer of thermally developing nanofluid flows in a horizontal microtube. International Journal of Thermal Sciences, 109 . pp. 54-69. ISSN 1290-0729 (Print) 1778-4166 (Online)

Mısırlıoğlu, Burç and Şendur, Kürşat (2016) Ferroelectric/semiconductor/tunnel-junction stacks for nondestructive and low-power read-out memory. IEEE Transactions on Electron Devices, 63 (6). pp. 2374-2379. ISSN 0018-9383 (Print) 1557-9646 (Online)

Mohammadi, Ali and Koşar, Ali (2016) Hydrodynamic and thermal performance of microchannels with different in-line arrangements of cylindrical micropin fins. Journal of Heat Transfer, 138 (12). ISSN 0022-1481 (Print) 1528-8943 (Online)

Mokkapati, Raghu Sarma and Özgüz, Volkan Hüsnü and Koşar, Ali (2016) Experimental evidence and theoretical analysis of nanobubble stability within graphene nanoscrolls. Journal of Nanoscience and Nanotechnology, 16 (6). pp. 6425-6431. ISSN 1533-4880 (Print) 1533-4899 (Online)

Munoa, J. and Beudaert, X. and Dombovari, Z. and Altıntaş, Y. and Budak, Erhan and Brecher, C. and Stepan, G. (2016) Chatter suppression techniques in metal cutting. CIRP Annals - Manufacturing Technology, 65 (2). pp. 785-808. ISSN 0007-8506 (Print) 1726-0604 (Online)

Nedaei, Masoumeh and Armağan, Efe and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali (2016) Enhancemet of flow boiling heat transfer in pHEMA/pPFDA coated microtubes with longitudinal variations in wettability. AIP Advances, 6 (3). ISSN 2158-3226

Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) Generalized model for dynamics and stability of multi-axis milling with complex tool geometries. Journal of Materials Processing Technology, 238 . pp. 446-458. ISSN 0924-0136 (Print) 1873-4774 (Online)

Özsöy, Eşref Emre and Golubovic, Edin and Şabanoviç, Asif and Boğosyan, Seta and Gökaşan, Metin (2016) Modeling and control of a doubly fed induction generator with a disturbance observer: a stator voltage oriented approach. Turkish Journal of Electrical Engineering & Computer Sciences, 24 (3). pp. 961-972. ISSN 1300-0632 (Print) 1303-6203 (Online)

Öztürk, Erdem and Çomak, Alptunç and Budak, Erhan (2016) Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes. Journal of Sound and Vibration, 360 . pp. 17-30. ISSN 0022-460X (Print) 1095-8568 (Online)

Rahimi, Eesa and Şendur, Kürşat (2016) Femtosecond pulse shaping by ultrathin plasmonic metasurfaces. Journal of the Optical Society of America B, 33 (2). A1-A7. ISSN 0740-3224 (Print) 1520-8540 (Online)

Sarıdağ, Serkan and Helvacıoğlu-Yiğit, Dilek and Özcan, Mutlu and Avcu, Egemen and Kızıltaş, Güllü (2016) Micro-computerized tomography analysis of cement voids and pull-out strength of glass fiber posts luted with self-adhesive and glass-ionomer cements in the root canal. Journal of Adhesion Science and Technology, 30 (14). pp. 1585-1595. ISSN 0169-4243 (Print) 1568-5616 (Online)

Shojaeian, Mostafa and Koşar, Ali (2016) Convective heat transfer of non-Newtonian power-law slip flows with variable thermophysical properties in parallel-plate and circular microchannels. International Journal of Thermal Sciences, 100 . pp. 155-168. ISSN 1290-0729 (Print) 1778-4166 (Online)

Shojaeian, Mostafa and Sezen, Meltem and Koşar, Ali (2016) Pool boiling heat transfer characteristics of non-Newtonian Xanthan gum solutions. Experimental Thermal and Fluid Science, 70 . pp. 77-84. ISSN 0894-1777 (Print) 1879-2286 (Online)

Shojaeian, Mostafa and Yıldızhan, Melike Mercan and Coşkun, Ömer and Özkalay, Ebrar and Tekşen, Yiğit and Gülgün, Mehmet Ali and Yağcı Acar, Havva and Koşar, Ali (2016) Investigation of change in surface morphology of heated surfaces upon pool boiling of magnetic fluids under magnetic actuation. Materials Research Express, 3 (9). ISSN 2053-1591

Şişman, Yağmur and Khalili Sadaghiani, Abdolali and Khedir, Khedir R. and Brozak, Matthew and Karabacak, Tansel and Koşar, Ali (2016) Subcooled flow boiling over microstructured plates in rectangular minichannels. Nanoscale and Microscale Thermophysical Engineering, 20 (3-4). pp. 173-190. ISSN 1556-7265 (Print) 1556-7273 (Online)

Tansık, Gülistan and Kılıç, Erden and Beter, Mustafa and Demiralp, Bahtiyar and Kızıltaş, Güllü and Can, Nuray and Özkan, Hüseyin and Ergül, Elif and Güler, Mustafa O. and Tekinay, Ayşe B. (2016) A glycosaminoglycan mimetic peptide nanofiber gel as an osteoinductive scaffold. Biomaterials Science, 4 (9). pp. 1328-1339. ISSN 2047-4830 (Print) 2047-4849 (Online)

Tekirdağ Koşar, Kumsal Ayşe and Akkoç, Yunus and Koşar, Ali and Gözüaçık, Devrim (2016) MIR376 family and cancer. Histology and Histopathology, 31 (8). pp. 841-855. ISSN 0213-3911 (Print) 1699-5848 (Online)

Tunç, Lütfi Taner and Budak, Erhan and Bilgen, Samet and Zatarain, Mikel (2016) Process simulation integrated tool axis selection for 5-axis tool path generation. CIRP Annals - Manufacturing Technology, 65 (1). pp. 381-384. ISSN 0007-8506 (Print) 1726-0604 (Online)

Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Budak, Erhan (2016) Machining strategy development and parameter selection in 5-axis milling based on process simulations. International Journal of Advanced Manufacturing Technology, 85 (5-8). pp. 1483-1500. ISSN 0268-3768 (Print) 1433-3015 (Online)

Papers in Conference Proceedings

Adak, Ömer Kemal and Gülhan, Mert Mehmet and Erkekli, Koray and Bahçeci, Beste and Erbatur, Kemalettin (2016) Dört bacaklı robotlarda merkezi örüntü üreteci ve genetik algoritmalar ile referans sentezi. In: ToRK 2016 National Robotics Conference, Istanbul (Accepted)

Agboh, Wisdom Chukwunwike and Yalçın, Mustafa and Patoğlu, Volkan (2016) A six degrees of freedom haptic interface for laparoscopic training. In: IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon, Korea

Ahmad, Fiaz and Rasool, Akhtar and Özsoy, Emre and Şabanoviç, Asif and Elitaş, Meltem (2016) Design of a robust cascaded controller for Cuk converter. In: 17th IEEE International Power Electronics and Motion Control Conference (PEMC), Varna, Bulgaria

Akbaş, Tunç and Eskimez, Şefik Emre and Özel, Selim and Fidan, Kaan Can and Bahçeci, Beste and Adak, Ömer Kemal and Gülhan, Mert Mehmet and Erkekli, Koray and Erbatur, Kemalettin (2016) Dört bacaklı robotlar için önizleme kontrolü ve sıfır moment noktası esaslı yürüyüş yörüngesi üretimi. In: ToRK 2016 National Robotics Conference, Istanbul (Accepted)

Aran, Volkan and Ünel, Mustafa (2016) Feedforward mapping for engine control. In: 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), Florence, Italy

Azvar, Milad and Budak, Erhan (2016) Multi-dimensional modelling of chatter stability in parallel turning operation. In: 17th International Conference on Machine Design and Production, Bursa, Turkey

Babaie Rizvandi, Omid and Yeşilyurt, Serhat (2016) Design of anode flow channels and headers for a large PEMFC operating at ultra-low stoichiometric flow conditions at the anode exit. In: ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2016), Washington, DC, USA

Budak, Erhan (2016) Improving productivity in machining processes through modeling. In: 3. Wiener Produktionstechnik Kongress 2016 Adaptive & Smart Manufacturing, Vienna, Austria

Çoruhlu, Gökay and Erdem, Esra and Patoğlu, Volkan (2016) A formal approach to discrepancy generation for systematic testing of execution monitoring algorithms in simulation. In: IEEE International Conference on Simulation, Modeling, and Programming for Autonomous Robots (SIMPAR), San Francisco, CA, USA

Elitaş, Meltem and Sadeghi, Sahl and Birinci, Yelda (2016) Development of microfabricated tools to investigate immune cell-tumor cell interactions. In: Conference Series LLC Joint International Event on 5th European Immunology & Innate Immunity, Berlin, Germany

Evren Han, Sanem and Ünel, Mustafa (2016) Stabilization of a pan-tilt system using a polytopic quasi-LPV model and LQR control. In: 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), Florence, Italy

Günay, Sezen Yağmur and Hocaoğlu, Elif and Patoğlu, Volkan and Çetin, Müjdat (2016) Detection of motor task difficulty level from EEG data (EEG verisinden motor hareketi zorluk seviyesinin tespiti). In: 24th Signal Processing and Communication Application Conference (SIU 2016), Zonguldak, Turkey

Janipour, Mohsen and Şendur, Kürşat (2016) Out-of-plane optical interactions of nanohole trimers milled in stacked gold films. In: 7th International Conference on Metamaterials, Photonic Crystals and Plasmonics (META’16), Malaga, Spain

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2016) Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi. In: 7. Uluslararası Talaşlı İmalat Sempozyumu (UTİS 2016), Istanbul

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2016) Modeling and measurement of cutting temperatures in milling. In: 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnitz, Germany

Karimzadehkhouei, Mehrdad and Sadaghiani, Abdolali Khalili and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2016) Experimental study on heat transfer of multi-walled carbon nanotubes/water nanofluids in horizontal microtubes. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis, Singapore

Khalili Sadaghiani, Abdolali and Şişman, Yağmur and Özaydın İnce, Gözde and Koşar, Ali (2016) An experimental study on flow boiling characteristics of phema nano-coated surfaces in a microchannel. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer (MNHMT2016), Biopolis, Singapore

Mohammadi, Ali and Koşar, Ali (2016) Hydrodynamic and thermal characteristics of the flow inside a rectangular microchannel with different cylindrical micro pin fins. In: 14th International Conference on Nanochannels, Microchannels, and Minichannels, Washington DC (Accepted)

Munawar, Hammad and Patoğlu, Volkan (2016) Gravity-Assist: a series elastic body weight support system with inertia compensation. In: IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon, Korea

Munawar, Hammad and Yalçın, Mustafa and Patoğlu, Volkan (2016) Motion control of a kinematically redundant overground device. In: Türkiye Robotbilim Konferansı (ToRK 2016), İstanbul, Türkiye

Munawar, Hammad and Yalçın, Mustafa and Patoğlu, Volkan (2016) Redundant kinematics and workspace centering control of AssistOn-Gait overground gait and balance trainer. In: IEEE International Conference on Robotics and Automation (ICRA 2016), Stockholm, Sweden

Nouman, Ahmed and Patoğlu, Volkan and Erdem, Esra (2016) Experimental evaluation of hybrid conditional planning for service robotics. In: Türkiye Robotbilim Konferansı (ToRK 2016), İstanbul, Türkiye

Nouman, Ahmed and Yalçıner, İbrahim Faruk and Erdem, Esra and Patoğlu, Volkan (2016) Experimental evaluation of hybrid conditional planning for service robotics. In: 2016 International Symposium on Experimental Robotics (ISER 2016), Tokyo, Japan

Otaran, Ata and Tokatlı, Ozan and Patoğlu, Volkan (2016) Hands-on learning with a series elastic educational robot. In: 10th International Conference on Haptics: Perception, Devices, Control, and Applications (EuroHaptics 2016), London, UK

Otaran, Ata and Tokatlı, Ozan and Patoğlu, Volkan (2016) Seri elastik eyleyici tabanlı eğitsel robot. In: Türkiye Robotbilim Konferansı (ToRK 2016), İstanbul, Türkiye

Önol, Aykut Özgün and Sancar, Uğur and Onat, Ahmet and Yeşilyurt, Serhat (2016) Modeling, hardware-in-the-loop simulations and control design for small-scale vertical axis wind turbines. In: 9th ASME Annual Dynamic Systems and Control Conference (DSCC2016), Minneapolis, Minnesota, USA

Önol, Aykut Özgün and Yeşilyurt, Serhat (2016) Transient performance of a vertical axis wind turbine. In: 69th Annual Meeting of the APS Division of Fluid Dynamics, Portland, Oregon, USA

Rahimi, Eesa and Şendur, Kürşat (2016) VO2-driven switchable-beam directional antenna for micro/nano scale optical communications. In: 7th International Conference on Metamaterials, Photonic Crystals and Plasmonics (META’16), Malaga, Spain

Şabanoviç, Asif (2016) Challenges in motion control systems. In: IEEJ International Workshop on Sensing, Actuation, Motion Control, and Optimization (SAMCON2016), Tokyo

Şentürk, Yusuf Mert and Patoğlu, Volkan (2016) Design and control of an MRI compatible series elastic actuator. In: IEEE International Conference on Robotics and Biomimetics (ROBIO 2016), Qingdao, China

Şentürk, Yusuf Mert and Patoğlu, Volkan (2016) Manyetik rezonans görüntülemesi uyumlu seri elastik eyleyici tasarımı ve kontrolü. In: Türkiye Robotbilim Konferansı (ToRK 2016), İstanbul, Türkiye

Şentürk, Yusuf Mert and Patoğlu, Volkan (2016) Manyetik rezonans görüntülemesi uyumlu seri elastik eyleyici tasarımı ve kontrolü (MRI compatible series elastic actuator design and control). In: Otomatik Kontrol Ulusal Toplantısı (TOK’2016), Eskişehir, Türkiye

Şişman, Yağmur and Sadaghiani, Abdolali Khalili and Khedir, Ramazan and Karabacak, Tansel and Koşar, Ali (2016) Nucleate boiling heat transfer enhancement using nanostructured al-alloy plates. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis, Singapore

Uzunovic, Tarik and Golubovic, Edin and Şabanoviç, Asif (2016) Force control of piezoelectric walker. In: 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), Florence, Italy

Yavuz, Fırat and Ünel, Mustafa (2016) Robust balancing and position control of a single spherical wheeled mobile platform. In: 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), Florence, Italy

Yeşilyurt, Serhat and Babaie Rizvandi, Omid (2016) Design and optimization of anode flow field of a large proton exchange membrane fuel cell for high hydrogen utilization. In: 69th Annual Meeting of the APS Division of Fluid Dynamics, Portland, Oregon, USA

Yeşilyurt, Serhat and Çaldağ, Hakan Osman (2016) Trajectories of artificial microswimmers with helical tails inside circular channels. In: 69th Annual Meeting of the APS Division of Fluid Dynamics, Portland, Oregon, USA

Yeşilyurt, Serhat and Demir, Ebru (2016) Propulsion by helical strips in circular channels. In: 69th Annual Meeting of the APS Division of Fluid Dynamics, Portland, Oregon, USA

Yılmaz, A. and Helvacıoğlu-Yiğit, D. and Gür, C. and Ersev, H. and Kızıltaş, Güllü and Avcu, E. and Baydemir, C. and Abbott, P. V. (2016) European Society of Endodontology: Abstracts from the Biennial Congress 2015 (Micro-CT evaluation of dentine defect formation during re-treatment with hand and rotary instruments). In: 17th Biennial European Society of Endodontology Congress, Barcelona, Spain

Yılmaz, E. E. and Budak, Erhan and Özgüven, H. Nevzat (2016) Modeling and measurement of micro end mill dynamics using inverse stability approach. In: 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnizt, Germany

Book Section / Chapter

Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa (2016) Single droplet tracking in jet flow. In: Campilho, Aurello and Karray, Fakhri, (eds.) Image Analysis and Recognition: 13th International Conference, ICIAR 2016, in Memory of Mohamed Kamel, Póvoa de Varzim, Portugal, July 13-15, 2016, Proceedings. Lecture Notes in Computer Science, 9730. Springer International Publishing, Switzerland, pp. 415-422. ISBN 978-3-319-41500-0 (Print) 978-3-319-41501-7 (Online)

Thesis

Babaie Rizvandi, Omid (2016) Design and modeling of a large proton exchange membrane fuel cell with high hydrogen utilization for automotive applications. [Thesis]

Büyüköztürk, Yağmur (2016) Flow boiling inside rectangular channels with engineered surfaces. [Thesis]

Çaldağ, Hakan Osman (2016) Characterization of trajectories of magnetically actuated microswimmers with helical tails in circular channels. [Thesis]

Kamadan, Abdullah (2016) Development of co-design frameworks for optimal variable compliant actuation. [Thesis]

Keçebaş, Muhammed Ali (2016) Passive radiative cooling using optical thin film coatings. [Thesis]

Önol, Aykut Özgün (2016) Modeling, hardware-in-the-loop simulations and control design for a vertical axis wind turbine with high solidity. [Thesis]

Özdamar, Hakkı Baran (2016) Robotic contour tracking with force control and an operational space disturbance observer. [Thesis]

Saygıner, Osman (2016) Topology optimization and cooling system design for functionally graded patch antenna substrates. [Thesis]

Shaikh, Shoaib Imtiyaz (2016) A compact laboratory setup for electric drives education. [Thesis]

Tofighi, Nima (2016) Development of an incompressible smoothed particle hydrodynamics method for electrohydrodynamics of immiscible fluids and rigid particles. [Thesis]

Yavuz, Fırat (2016) Angular motion estimation and its application to the stabilization of a ballbot. [Thesis]