Items where Author is "Tunç, Lütfi Taner"

Group by: Item Type | No Grouping
Number of items: 30.

Article

Özcan, Yiğit and Tunç, Lütfi Taner and Kopacka, Jan and Çetin, Beril and Sulitka, Matej (2021) Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces. International Journal of Advanced Manufacturing Technology . ISSN 0268-3768 (Print) 1433-3015 (Online) Published Online First http://dx.doi.org/10.1007/s00170-021-07131-1

Verl, Alexander and Valente, Anna and Melkote, Shreyes and Brecher, Christian and Öztürk, Erdem and Tunç, Lütfi Taner (2019) Robots in machining. CIRP Annals - Manufacturing Technology . ISSN 0007-8506 (Print) 1726-0604 (Online) Published Online First http://dx.doi.org/10.1016/j.cirp.2019.05.009

Tunç, Lütfi Taner (2019) Effect of MQL conditions on tool life in milling of AISI 316L stainless steel. Journal of the Faculty of Engineering and Architecture of Gazi University, 34 (4). pp. 1665-1677. ISSN 1300-1884 (Print) 1304-4915 (Online)

Tunç, Lütfi Taner and Zatarain, Mikel (2019) Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts. CIRP Annals - Manufacturing Technology, 68 (1). pp. 401-404. ISSN 0007-8506 (Print) 1726-0604 (Online)

Tunç, Lütfi Taner (2019) Smart tool path generation for 5-axis ball-end milling of sculptured surfaces using process models. Robotics and Computer Integrated Manufacturing, 56 . pp. 212-221. ISSN 0736-5845 (Print) 1879-2537 (Online)

Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems. Mechanical Systems and Signal Processing, 111 . pp. 423-441. ISSN 0888-3270

Tunç, Lütfi Taner and Özşahin, Orkun (2018) Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes. Advances in Manufacturing . ISSN 2095-3127 (Print) 2195-3597 (Online) Published Online First http://dx.doi.org/10.1007%2Fs40436-018-0233-x

Tunç, Lütfi Taner (2018) Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1891-1909. ISSN 0268-3768 (Print) 1433-3015 (Online)

Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) Generalized model for dynamics and stability of multi-axis milling with complex tool geometries. Journal of Materials Processing Technology, 238 . pp. 446-458. ISSN 0924-0136 (Print) 1873-4774 (Online)

Tunç, Lütfi Taner (2016) Rapid extraction of machined surface data through inverse geometrical solution of tool path information. International Journal of Advanced Manufacturing Technology, 87 (1-4). pp. 353-362. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Budak, Erhan and Bilgen, Samet and Zatarain, Mikel (2016) Process simulation integrated tool axis selection for 5-axis tool path generation. CIRP Annals - Manufacturing Technology, 65 (1). pp. 381-384. ISSN 0007-8506 (Print) 1726-0604 (Online)

Tunç, Lütfi Taner and Özkırımlı, Ömer Mehmet and Budak, Erhan (2015) Generalized cutting force model in multi-axis milling using a new engagement boundary determination approach. International Journal of Advanced Manufacturing Technology, 77 (1-4). pp. 341-355. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Budak, Erhan (2013) Identification and modeling of process damping in milling. Journal of Manufacturing Science and Engineering, 135 (2). ISSN 1087-1357

Tunç, Lütfi Taner and Budak, Erhan (2012) Effect of cutting conditions and tool geometry on process damping in machining. International Journal of Machine Tools and Manufacture, 57 . pp. 10-19. ISSN 0890-6955

Budak, Erhan and Tunç, Lütfi Taner and Alan, Salih and Özgüven, H. Nevzat (2012) Prediction of workpiece dynamics and its effects on chatter stability in milling. CIRP Annals - Manufacturing Technology, 61 (1). pp. 339-342. ISSN 0007-8506

Öztürk, Erdem and Tunç, Lütfi Taner and Budak, Erhan (2011) Analytical methods for increased productivity in five-axis ball-end milling. International Journal of Mechatronics and Manufacturing Systems (IJMMS), 4 (3/4). pp. 238-265. ISSN 1753-1039 (print) ; 1753-1047 (online)

Budak, Erhan and Tunç, Lütfi Taner (2010) Identification and modeling of process damping in turning and milling using a new approach. CIRP Annals - Manufacturing Technology, 59 (1). pp. 403-408. ISSN 0007-8506

Papers in Conference Proceedings

Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner (2020) Improved vision based pose estimation for industrial robots via sparse regression. In: 2020 International Conference on Intelligent Computing, Bari, Italy

Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner (2020) Improving vision based pose estimation using LSTM neural networks. In: 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), Singapore

Gönül, Bora and Tunç, Lütfi Taner (2019) Model based analysis of kinematic redundancy for increased chatter stability in robotic milling. In: 10th International Congress on Machining, Antalya, Turkey

Özcan, Yiğit and Tunç, Lütfi Taner (2019) Experimental investigation on tool path patterns in controlled depth abrasive water jet machining. In: 15th International Conference on High Speed Machining (HSM 2019), Prague, Czech Republic

Tunç, Lütfi Taner and Seçer, Ragıp Orkun (2019) Investigation of process damping in robotic milling. In: 15th International Conference on High Speed Machining (HSM 2019), Prague, Czech Republic

Gönül, Bora and Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2019) Improved stable conditions in robotic milling by kinematic redundancy. In: 17th CIRP Conference on Modelling of Machining Operations, Sheffield, UK

Özcan, Yiğit and Tunç, Lütfi Taner (2018) Investigation of surface mophology and integrity in multi axis abrasive waterjet machining (AWJM). In: International Symposium on Machining, Antalya, Turkey

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Kinematic based selection of the workpiece location in robotic milling. In: International Symposium on Machining, Antalya, Turkey

Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter (2018) Identification of the CIRP expertise network based on public data. In: 51st CIRP Conference on Manufacturing Systems, Stockholm, Sweden

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Tool axis optimization for robotic 5-axis milling considering kinematics. In: 14th Conference on High Speed Machining Conference, San Sebastian (Accepted/In Press)

Tunç, Lütfi Taner and Sapmaz, Ömer Faruk (2017) Challenges for industrial robots towards milling applications. In: 8th International Symposium on Machining (UTIS 2017), Antalya, Turkey

Özlü, Emre and Tunç, Lütfi Taner and Güven, İpek and Budak, Erhan (2012) Industrial applications of science integrated machining approach. In: 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Pamukkale, Denizli, Turkey

Tunç, Lütfi Taner and Budak, Erhan (2011) Effect of cutting conditions and tool geometry on process damping in machining. In: 4th International Conference on Manufacturing Engineering (ICMEN2011), Thessaloniki, Greece

This list was generated on Sun Jun 26 22:30:18 2022 +03.