Items where Author is "Bilge, Kaan"

Arıtürk, Gizem Semra and Bilge, Kaan and Girişken, Çağla and Seven, Senem Avaz and Menceloğlu, Yusuf Z. (2024) A sustainable hybrid strengthening/stiffening approach for injection molded polypropylene matrix thermoplastic composites. Polymer Engineering and Science . ISSN 0032-3888 (Print) 1548-2634 (Online) Published Online First https://dx.doi.org/10.1002/pen.26937

Arıtürk, Gizem Semra and Bilge, Kaan and Seven, Senem Avaz and Menceloğlu, Yusuf Z. (2024) Morphological adaptation of expanded vermiculite in polylactic acid and polypropylene matrices for superior thermoplastic composites. Polymer Composites, 45 (6). pp. 5043-5050. ISSN 0272-8397 (Print) 1548-0569 (Online)

Arıtürk, Gizem Semra and Girişken, Çağla and Bilge, Kaan and Yargici Kovanci, Ceren and Menceloğlu, Yusuf Z. and Avaz Seven, Senem (2024) Hybrid green composites of PLA incorporated with upcycled waste cellulose and vermiculite. European Polymer Journal, 203 . ISSN 0014-3057 (Print) 1873-1945 (Online)

Ufuk, Recep and Bilge, Kaan and Kıral, Barış Emre and Ereke, Murat and Karabeyoğlu, Arif (2023) Fractographic investigation of cryogenic temperature mode-II delamination behavior of filament wound CFRP laminates with varied Resin systems. Journal of Composites Science, 7 (11). ISSN 2504-477X

Asghari Arpatappeh, Farzin and Manga, Emel and Bilge, Kaan and Aydemir, Berk Emre and Gülgün, Mehmet Ali and Papila, Melih (2022) Morphology evolution of self-same nanocomposites hybridized with jumbo-sized particles. Journal of Applied Polymer Science, 139 (48). ISSN 0021-8995 (Print) 1097-4628 (Online)

Seviniş Özbulut, Emine Billur and Seven, Merve Senem and Bilge, Kaan and Akkaş Mohammadmoradi, Tuğçe and Taş, Cüneyt Erdinç and Yıldız, Burçin and Atılgan, Canan and Menceloğlu, Yusuf Z. and Ünal, Serkan (2020) Blends of highly branched and linear poly(arylene ether sulfone)s: multiscale effect of the degree of branching on the morphology and mechanical properties. Polymer, 188 . ISSN 0032-3861 (Print) 1873-2291 (Online)

Kızıltaş, Güllü and Papila, Melih and Yılmaz, Bengisu and Bilge, Kaan (2019) Challenges in micro-CT characterization of composites. In: Orhan, Kaan, (ed.) Micro-Computed Tomography (Micro-CT) in Medicine and Engineering. Springer, Cham, Switzerland, pp. 225-246. ISBN 978-3-030-16640-3 (Print) 978-3-030-16641-0 (Online)

Asghari Arpatappeh, Farzin and Aydemir, Berk Emre and Bilge, Kaan and Papila, Melih (2019) Multiscale reinforcing interlayers of self-same P(St-co-GMA) nanofibers loaded with MCF for polymer composites and nanocomposites. In: AIAA Scitech Forum, 2019, San Diego, United States

Şimşek, Eren and Oğuz, Oğuzhan and Bilge, Kaan and Çıtak, Mehmet Kerem and Çolak, Oğuzhan and Menceloğlu, Yusuf Z. (2018) Poly(propylene)/waste vulcanized ethylene- propylene-diene monomer (PP/WEPDM) blends prepared by high-shear thermo-kinetic mixer. Journal of Elastomers and Plastics, 50 (6). pp. 537-553. ISSN 0095-2443 (Print) 1530-8006 (Online)

Baysal, Mustafa and Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih and Yürüm, Yuda (2018) Preparation of high surface area activated carbon from waste-biomass of sunflower piths: Kinetics and equilibrium studies on the dye removal. Journal of Environmental Chemical Engineering, 6 (2). pp. 1702-1713. ISSN 2213-3437 (Print) 2213-2929 (Online)

Baysal, Mustafa and Bilge, Kaan and Yıldızhan, Melike Mercan and Yorulmaz, Yelda and Öncel, Çınar and Papila, Melih and Yürüm, Yuda (2018) Catalytic synthesis of boron nitride nanotubes at low temperatures. Nanoscale, 10 (10). pp. 4658-4662. ISSN 2040-3364 (Print) 2040-3372 (Online)

Oğuz, Oğuzhan and Şimşek, Eren and Bilge, Kaan and Menceloğlu, Yusuf Z. (2017) Low density polypropylene/waste cellulose fiber composites by high-shear thermo-kinetic mixer. International Polymer Processing, 32 (5). pp. 562-567. ISSN 0930-777X

Bilge, Kaan and Yorulmaz, Yelda and Javanshour, Farzin and Ürkmez, Ayça and Yılmaz, Bengisu and Şimşek, Eren and Papila, Melih (2017) Synergistic role of in-situ crosslinkable electrospun nanofiber/epoxy nanocomposite interlayers for superior laminated composites. Composites Science and Technology, 151 . pp. 310-316. ISSN 0266-3538 (Print) 1879-1050 (Online)

Oğuz, Oğuzhan and Bilge, Kaan and Şimşek, Eren and Çıtak, Mehmet Kerem and Wis, Abdulmounem Alchekh and Özkoç, Güralp and Menceloğlu, Yusuf Z. (2017) High-performance green composites of poly(lactic acid) and waste cellulose fibers prepared by high-shear thermokinetic mixing. Industrial and Engineering Chemistry Research, 56 (30). pp. 8568-8579. ISSN 0888-5885

Özden-Yenigün, Elif and Bilge, Kaan and Sünbüloğlu, Emin and Bozdağ, Ergün and Papila, Melih (2017) High strain rate response of nanofiber interlayered structural composites. Composite Structures, 168 . pp. 47-55. ISSN 0263-8223 (Print) 1879-1085 (Online)

Bilge, Kaan (2017) Sub-phase design for electrospun nanofibrous interlayer toughening in hierarchical composites. [Thesis]

Bilge, Kaan and Ürkmez, Ayça and Şimşek, Eren and Papila, Melih (2016) Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self-same nanocomposites. Journal of Applied Polymer Science, 133 (43). ISSN 0021-8995 (Print) 1097-4628 (Online)

Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih (2016) Sound-tracking of failure events in cross-ply composite laminates under tension. Composite Structures, 153 . pp. 421-427. ISSN 0263-8223 (Print) 1879-1085 (Online)

Bilge, Kaan and Papila, Melih (2014) Interlayer toughening mechanisms of composite materials. In: Qin, Qinghua and Ye, Jianqiao, (eds.) Toughening Mechanisms in Composite Materials. Elsevier - Woodhead Publishing, Amsterdam, Netherlands. ISBN 9781782422792 (Accepted)

Bilge, Kaan and Venkataraman, S. and Menceloğlu, Yusuf Z. and Papila, Melih (2014) Global and local nanofibrous interlayer toughened composites for higher in-plane strength. Composites Part A: Applied Science and Manufacturing, 58 . pp. 73-76. ISSN 1359-835X

Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2012) Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers. Composites Science and Technology, 72 (14). pp. 1639-1645. ISSN 0266-3538

Bilge, Kaan and Başer, Gülnur and Papila, Melih (2012) Effect of TEX on the strength and failure envelopes of non-crimp glass fiber composites. In: 15th European Conference on Composite Materials (ECCM15), Venice, Italy

Başer, Gülnur and Bilge, Kaan and Uyanik, Nursli and Papila, Melih (2012) Investigation of the strength and failure envelopes of non-crimp glass fiber reinforced thermoplastic composites based on in-situ polymerized cyclic oligomers. In: 15th European Conference on Composite Materials (ECCM15), Venice, Italy

Bilge, Kaan (2012) Multi-scale nature of composite materials: three case studies. [Thesis]

Özden Yenigün, Elif and Atılgan, Ali Rana and Bilge, Kaan and Menceloğlu, Yusuf Z. and Atılgan, Canan and Papila, Melih (2011) Designed-in molecular interactions lead to superior thermo-mechanical properties in nanocomposites. In: 2010 MRS Fall Meeting, Boston, Massachusetts

Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2011) Strength of hybrid composites reinforced with surface modified polymer/MWCNTs nano-composite interlayers. In: 18th International Conference on Composite Materials (ICCM18), Jeju Island, Korea