Items where Author is "Bilge, Kaan"

Group by: Item Type | No Grouping
Number of items: 20.

Article

Seviniş Özbulut, Emine Billur and Seven, Merve Senem and Bilge, Kaan and Akkaş, Tuğçe and Taş, Cüneyt Erdinç and Yıldız, Burçin and Atılgan, Canan and Menceloğlu, Yusuf Z. and Ünal, Serkan (2020) Blends of highly branched and linear poly(arylene ether sulfone)s: multiscale effect of the degree of branching on the morphology and mechanical properties. Polymer, 188 . ISSN 0032-3861 (Print) 1873-2291 (Online)

Baysal, Mustafa and Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih and Yürüm, Yuda (2018) Preparation of high surface area activated carbon from waste-biomass of sunflower piths: Kinetics and equilibrium studies on the dye removal. Journal of Environmental Chemical Engineering, 6 (2). pp. 1702-1713. ISSN 2213-3437

Baysal, Mustafa and Bilge, Kaan and Yıldızhan, Melike Mercan and Yorulmaz, Yelda and Öncel, Çınar and Papila, Melih and Yürüm, Yuda (2018) Catalytic synthesis of boron nitride nanotubes at low temperatures. Nanoscale, 10 (10). pp. 4658-4662. ISSN 2040-3364 (Print) 2040-3372 (Online)

Oğuz, Oğuzhan and Şimşek, Eren and Bilge, Kaan and Menceloğlu, Yusuf Z. (2017) Low density polypropylene/waste cellulose fiber composites by high-shear thermo-kinetic mixer. International Polymer Processing, 32 (5). pp. 562-567. ISSN 0930-777X

Bilge, Kaan and Yorulmaz, Yelda and Javanshour, Farzin and Ürkmez, Ayça and Yılmaz, Bengisu and Şimşek, Eren and Papila, Melih (2017) Synergistic role of in-situ crosslinkable electrospun nanofiber/epoxy nanocomposite interlayers for superior laminated composites. Composites Science and Technology, 151 . pp. 310-316. ISSN 0266-3538 (Print) 1879-1050 (Online)

Oğuz, Oğuzhan and Bilge, Kaan and Şimşek, Eren and Çıtak, Mehmet Kerem and Wis, Abdulmounem Alchekh and Özkoç, Güralp and Menceloğlu, Yusuf Z. (2017) High-performance green composites of poly(lactic acid) and waste cellulose fibers prepared by high-shear thermokinetic mixing. Industrial and Engineering Chemistry Research, 56 (30). pp. 8568-8579. ISSN 0888-5885

Özden-Yenigün, Elif and Bilge, Kaan and Sünbüloğlu, Emin and Bozdağ, Ergün and Papila, Melih (2017) High strain rate response of nanofiber interlayered structural composites. Composite Structures, 168 . pp. 47-55. ISSN 0263-8223 (Print) 1879-1085 (Online)

Bilge, Kaan and Ürkmez, Ayça and Şimşek, Eren and Papila, Melih (2016) Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self-same nanocomposites. Journal of Applied Polymer Science, 133 (43). ISSN 0021-8995 (Print) 1097-4628 (Online)

Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih (2016) Sound-tracking of failure events in cross-ply composite laminates under tension. Composite Structures, 153 . pp. 421-427. ISSN 0263-8223 (Print) 1879-1085 (Online)

Bilge, Kaan and Venkataraman, S. and Menceloğlu, Yusuf Z. and Papila, Melih (2014) Global and local nanofibrous interlayer toughened composites for higher in-plane strength. Composites Part A: Applied Science and Manufacturing, 58 . pp. 73-76. ISSN 1359-835X

Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2012) Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers. Composites Science and Technology, 72 (14). pp. 1639-1645. ISSN 0266-3538

Papers in Conference Proceedings

Asghari Arpatappeh, Farzin and Aydemir, Berk Emre and Bilge, Kaan and Papila, Melih (2019) Multiscale reinforcing interlayers of self-same P(St-co-GMA) nanofibers loaded with MCF for polymer composites and nanocomposites. In: AIAA Scitech Forum, 2019, San Diego, United States

Bilge, Kaan and Başer, Gülnur and Papila, Melih (2012) Effect of TEX on the strength and failure envelopes of non-crimp glass fiber composites. In: 15th European Conference on Composite Materials (ECCM15), Venice, Italy

Başer, Gülnur and Bilge, Kaan and Uyanik, Nursli and Papila, Melih (2012) Investigation of the strength and failure envelopes of non-crimp glass fiber reinforced thermoplastic composites based on in-situ polymerized cyclic oligomers. In: 15th European Conference on Composite Materials (ECCM15), Venice, Italy

Özden Yenigün, Elif and Atılgan, Ali Rana and Bilge, Kaan and Menceloğlu, Yusuf Z. and Atılgan, Canan and Papila, Melih (2011) Designed-in molecular interactions lead to superior thermo-mechanical properties in nanocomposites. In: 2010 MRS Fall Meeting, Boston, Massachusetts

Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2011) Strength of hybrid composites reinforced with surface modified polymer/MWCNTs nano-composite interlayers. In: 18th International Conference on Composite Materials (ICCM18), Jeju Island, Korea

Book Section / Chapter

Kızıltaş, Güllü and Papila, Melih and Yılmaz, Bengisu and Bilge, Kaan (2019) Challenges in micro-CT characterization of composites. In: Orhan, Kaan, (ed.) Micro-Computed Tomography (Micro-CT) in Medicine and Engineering. Springer, Cham, Switzerland, pp. 225-246. ISBN 978-3-030-16640-3 (Print) 978-3-030-16641-0 (Online)

Bilge, Kaan and Papila, Melih (2014) Interlayer toughening mechanisms of composite materials. In: Qin, Qinghua and Ye, Jianqiao, (eds.) Toughening Mechanisms in Composite Materials. Elsevier - Woodhead Publishing, Amsterdam, Netherlands. ISBN 9781782422792 (Accepted)

Thesis

Bilge, Kaan (2017) Sub-phase design for electrospun nanofibrous interlayer toughening in hierarchical composites. [Thesis]

Bilge, Kaan (2012) Multi-scale nature of composite materials: three case studies. [Thesis]

This list was generated on Wed Dec 7 00:53:57 2022 +03.