Items where Subject is "R856-857 Biomedical engineering. Electronics. Instrumentation"

Article

Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa (2016) A new visual tracking method for the analysis and characterization of jet flow. Flow Measurement and Instrumentation . ISSN 0955-5986 (Print) 1873-6998 (Online) Published Online First http://dx.doi.org/10.1016/j.flowmeasinst.2016.08.005

Aydın, Mehmet Serhat and Şahin, Mervenaz and Doğan, Zeynep and Kızıltaş, Güllü (2023) Microstructural characterization of PCL-HA bone scaffolds based on nonsolvent-induced phase separation. ACS Omega, 8 (50). pp. 47595-47605. ISSN 2470-1343

Bilen, Bukem and Ateş Alkan, Fatma and Barutcu, Ümit Bora and Sezen, Meltem and Ünlü, Mehmet Burçin and Aghahev, Kamran (2018) Examination of metal mobilization from a gunshot by scanning acoustic microscopy, scanning electron microscopy, energy-dispersive X-Ray spectroscopy, and inductively coupled plasma optical emission spectroscopy: a case report. Journal of Medical Case Reports, 12 (1). ISSN 1752-1947

Chimate, Chetan and Koç, Bahattin (2014) Pressure assisted multi-syringe single nozzle deposition system for manufacturing of heterogeneous tissue scaffolds. International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 317-330. ISSN 0268-3768 (Print) 1433-3015 (Online)

Hamamcı, Andaç and Küçük, Nadir and Karaman, Kutlay and Engin, Kayıhan and Ünal, Gözde (2012) Tumor-Cut: segmentation of brain tumors on contrast enhanced MR images for radiosurgery applications. IEEE Transactions on Medical Imaging, 31 (3). pp. 790-804. ISSN 0278-0062

Kallempudi, Sreenivasa Saravan and Altıntaş, Zeynep and Kolkar Mohammed, Javed Hussain Niazi and Gürbüz, Yaşar (2012) A new microfluidics system with a hand-operated, on-chip actuator for immunosensor applications. Sensors and Actuators B: Chemical, 163 (1). pp. 194-201. ISSN 0925-4005

Kaya Yapıcı, Murat and Alkhidir, Tamador (2017) Intelligent medical garments with graphene-functionalized smart-cloth ECG sensors. Sensors, 17 (4). ISSN 1424-8220

Khoda, A. K. M. and Özbolat, İbrahim T. and Koç, Bahattin (2011) A functionally gradient variational porosity architecture for hollowed scaffolds fabrication. Biofabrication (Special Issue), 3 (3). ISSN 1758-5082

Khoda, A. K. M. B. and Özbolat, İbrahim T. and Koç, Bahattin (2011) Engineered tissue scaffolds with variational porous architecture. Journal of Biomechanical Engineering, Transactions of the ASME, 133 (1). ISSN 0148-0731

Khoda, A. K. M. Bashirul and Koç, Bahattin (2012) Designing controllable porosity for multifunctional deformable tissue scaffolds. Journal of Medical Devices - Transactions of ASME, 6 (3). ISSN 1932-6181 (Print) 1932-619X (Online)

Özbolat, İbrahim T. and Khoda, A.K.M.B. and Marchany, Michelle and Gardella, Joseph A. and Koç, Bahattin (2012) Hybrid tissue scaffolds for controlled release applications. Virtual and Physical Prototyping, 7 (1). pp. 37-47. ISSN 1745-2759 (Print) 1745-2767 (Online)

Özbolat, İbrahim T. and Koç, Bahattin (2012) 3D hybrid wound devices for spatiotemporally controlled release kinetics. Computer Methods and Programs in Biomedicine, 108 (3). pp. 922-931. ISSN 0169-2607 (Print) 1872-7565 (Online)

Özbolat, İbrahim T. and Koç, Bahattin (2010) Modeling of spatially controlled biomolecules in three-dimensional porous alginate structures. Journal of Medical Devices, 4 (4). ISSN 1932-6181 (Print) 1932-619X (Online)

Özbolat, İbrahim T. and Koç, Bahattin (2011) Multi-function based modeling of 3D heterogeneous wound scaffolds for improved wound healing. Computer-Aided Design & Applications, 8 (1). pp. 43-57. ISSN 1686-4360

Özbolat, İbrahim T. and Marchany, Michelle and Joseph, A. Gardella, Jr., and Koç, Bahattin (2013) Computer-aided 4D modeling of hydrolytic degradation in micropatterned bioresorbable membranes. Journal of Medical Devices, 7 (2). ISSN 1932-6181 (Print) 1932-619X (Online)

Özler, Saime Burçe and Bakırcı, Ezgi and Küçükgül, Can and Koç, Bahattin (2016) Three-dimensional direct cell bioprinting for tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials . ISSN 1552-4973 (Print) 1552-4981 (Online) Published Online First http://dx.doi.org/10.1002/jbm.b.33768

Samanta, Kuntal and Özbolat, İbrahim T. and Koç, Bahattin (2014) Optimized normal and distance matching for heterogeneous object modeling. Computers & Industrial Engineering, 69 . pp. 1-11. ISSN 0360-8352 (Print) 1879-0550 (Online)

Sarabi, Misagh Rezapour and Bediz, Bekir and Falo, Louis D. and Korkmaz, Emrullah and Tasoğlu, Savaş (2021) 3D printing of microneedle arrays: challenges towards clinical translation. Journal of 3D Printing in Medicine, 5 (2). pp. 65-70. ISSN 2059-4755 (Print) 2059-4763 (Online)

Temel, Fatma Zeynep and Yeşilyurt, Serhat (2013) Simulation-based analysis of micro-robots swimming at the center and near the wall of circular mini-channels. Microfluidics and Nanofluidics, 14 (1-2). pp. 287-298. ISSN 1613-4982 (Print) 1613-4990 (Online)

Toprak, Erdal (2011) Evolutionary paths to strong antibiotic resistance under dynamically sustained drug stress. (Accepted)

Papers in Conference Proceedings

Alipour Ghassabi, Ata and Kızıltaş, Güllü (2023) Microstructure effect on bone formation of a functionally graded scaffold using a mechanostat-based model. In: Tissue Engineering and Regenerative Medicine International Society (TERMIS), Krakow, Poland

Demir, Ali and Ünal, Gözde and Karaman, Kutlay (2009) Automatic registration of follow-up brain MRI scans. In: 14th National Biomedical Engineering Meeting, Izmir, Turkey

Jedari Golparvar, Ata and Yapıcı, Murat Kaya (2017) Wearable graphene textile-enabled EOG sensing. In: 16th IEEE Sensors Conference, Glasgow, Scotland

Khoda, AKM and Koç, Bahattin (2012) Designing bio-mimetic variational porosity for tissue scaffolds. In: 2012 Industrial and Systems Engineering Research Conference (ISERC 2012), Orlando, FL, USA

Khoda, AKM and Koç, Bahattin (2012) Modeling of multifunctional deformable porous scaffolds for soft tissue engineering. In: 2012 Industrial and Systems Engineering Research Conference (ISERC 2012), Orlando, FL, USA

Khoda, AKM B. and Koç, Bahattin (2012) Functionally heterogeneous porous scaffold design for tissue engineering. In: ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), Houston, Texas, USA

Khoda, AKM B. and Özbolat, İbrahim T. and Koç, Bahattin (2012) Modeling of multifunctional porous tissue scaffolds with continuous deposition path plan. In: ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), Houston, Texas, USA

Khoda, AKM Bashirul and Koç, Bahattin (2012) Conformal tissue scaffold with multi-functional porosity for wound healing. In: 1st International Conference on Design and Processes for Medical Devices (PROMED 2012), Brascia, Italy

Khoda, AKM Bashirul and Koç, Bahattin (2012) Multi-functional variational porosity in bone tissue scaffolds. In: 1st International Conference on Design and Processes for Medical Devices (PROMED 2012), Italy

Özbolat, İbrahim T. and Khoda, AKMB and Koç, Bahattin (2012) Bioadditive manufacturing of hybrid tissue scaffolds for controlled release kinetics. In: ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), Houston, TX, USA

Öztürk, Sezen and Alipour Ghassabi, Ata and Kızıltaş, Güllü (2023) Effect of 3d scaffold morphology on bone tissue regeneration based on a multi-physics fem model. In: Tissue Engineering and Regenerative Medicine International Society (TERMIS), Krakow, Poland

Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü and Alipour Ghassabi, Ata (2023) Mesenchymal stem cell diffusion integrated mechano- biology analysis of 3d scaffolds. In: Tissue Engineering and Regenerative Medicine International Society (TERMIS), Krakow, Poland

Yapıcı, Murat Kaya (2017) Wearable graphene textile sensors for biopotential monitoring. In: 5th International Conference on Bio-Sensing Technology, Riva Del Garda, Italy