Items where Division is "Integrated Manufacturing Technologies Research and Application Center" and Year is 2018

Article

Büyük, Murat and Atahan, Ali Osman and Kurucuoğlu, Kenan (2018) Impact performance evaluation of a crash cushion design using finite element simulation and full-scale crash testing. Safety, 4 (4). ISSN 2313-576X

Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) Modeling 3D melt electrospinning writing by response surface methodology. Materials & Design, 148 . pp. 87-95. ISSN 0264-1275 (Print) 1873-4197 (Online)

Demir, Eralp and Mercan, Safiye Canset (2018) A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response. International Journal of Machine Tools and Manufacture, 134 . pp. 25-41. ISSN 0890-6955 (Print) 1879-2170 (Online)

Güçlü, Serkan and Sharabati, Jalal-Al-Din and Saffarimiandoab, Farzin and Ağtaş, Meltem and İmer, Derya Y. and Paşaoğlu, Mehmet E. and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) Investigation of pilot scale manufacturing of polysulfone (PSf) membranes by wet phase inversion method. Desalination and Water Treatment, 131 . pp. 66-74. ISSN 1944-3994 (Print) 1944-3986 (Online)

Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying. ACS Omega, 3 (6). pp. 6400-6410. ISSN 2470-1343

Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology. Ocean Engineering, 147 . pp. 256-267. ISSN 0029-8018

Kocaman, Esat Selim and Yılmaz, Çağatay and Deniz, Ataman and Yıldız, Mehmet (2018) The performance of embedded fiber Bragg grating sensors for monitoring failure modes of foam cored sandwich structures under flexural loads. Journal of Sandwich Structures and Materials, 20 (5). pp. 553-577. ISSN 1099-6362 (Print) 1530-7972 (Online)

Oğuz, Oğuzhan and Şimşek, Eren and Kosak Soz, Çağla and Heinz, Özge and Yilgor, Emel and Yilgor, İskender and Menceloğlu, Yusuf Z. (2018) Effect of filler content on the structure-property behavior of poly(ethylene oxide) based polyurethaneurea-silica nanocomposites. Polymer Engineering and Science, 58 (7). pp. 1097-1107. ISSN 0032-3888 (Print) 1548-2634 (Online)

Ormancı-Acar, Türkan and Çelebi, Ferda and Keskin, Başak and Mutlu-Salmanlı, Öykü and Agtas, Meltem and Turken, Türker and Tufani, Ali and İmer, Derya Y. and Özaydın İnce, Gözde and Uçar Demir, Tuğba and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection. Desalination, 429 . pp. 20-32. ISSN 0011-9164 (Print) 1873-4464 (Online)

Ozbulut, M. and Tofighi, N. and Goren, O. and Yıldız, Mehmet (2018) Investigation of wave characteristics in oscillatory motion of partially filled rectangular tanks. Journal of Fluids Engineering, Transactions of the ASME, 140 (4). ISSN 0098-2202 (Print) 1528-901X (Online)

Rahmat, Amin and Tofighi, Nima and Yıldız, Mehmet (2018) A numerical study of Rayleigh-Taylor instability for various Atwood numbers using ISPH method. Progress in Computational Fluid Dynamics, 18 (5). pp. 267-276. ISSN 1468-4349 (Print) 1741-5233 (Online)

Rahmat, Amin and Yıldız, Mehmet (2018) A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence. International Journal of Multiphase Flow, 105 . pp. 32-44. ISSN 0301-9322 (Print) 1879-3533 (Online)

Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors. Thin-Walled Structures, 130 . pp. 458-466. ISSN 0263-8231 (Print) 1879-3223 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification. Composites Part A: Applied Science and Manufacturing, 106 . pp. 1-10. ISSN 1359-835X (Print) 1878-5840 (Online)

Shakoorioskooie, Mahdieh and Menceloğlu, Yusuf Z. and Ünal, Serkan and Hayat Soytaş, Serap (2018) Rapid microwave-assisted synthesis of platinum nanoparticles immobilized in electrospun carbon nanofibers for electrochemical catalysis. ACS Applied Nano Materials, 1 (11). pp. 6236-6246. ISSN 2574-0970

Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) Cost analysis of variable stiffness composite structures with application to a wind turbine blade. Composite Structures, 203 . pp. 681-695. ISSN 0263-8223 (Print) 1879-1085 (Online)

Şimşek, Eren and Oğuz, Oğuzhan and Bilge, Kaan and Çıtak, Mehmet Kerem and Çolak, Oğuzhan and Menceloğlu, Yusuf Z. (2018) Poly(propylene)/waste vulcanized ethylene- propylene-diene monomer (PP/WEPDM) blends prepared by high-shear thermo-kinetic mixer. Journal of Elastomers and Plastics, 50 (6). pp. 537-553. ISSN 0095-2443 (Print) 1530-8006 (Online)

Tunç, Lütfi Taner (2018) Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1891-1909. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Ozsahin, Orkun (2018) Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes. Advances in Manufacturing, 6 (3). pp. 308-318. ISSN 2095-3127 (Print) 2195-3597 (Online)

Yılmaz, Çağatay and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2018) Semi-intrinsic self-healing performance of liquid-cored microcapsules in epoxy matrix. Advances in Polymer Technology, 37 (5). pp. 1435-1443. ISSN 0730-6679 (Print) 1098-2329 (Online)

Papers in Conference Proceedings

Akdeniz Skvortsov, Gözde and Piluso, Susanna and Altunbek, Mine and Khani, Navid and Oosterwyck, Hans Van and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin (2018) 3D bioprinting of cell-laden molecularly engineered PEG-based hydrogels. In: Biofabrication Conference 2018, Wurzberg, Germany

Eroglu, Fatih and Yildirim, Afsin T. and Yesilyurt, Ogulcan and Şaş Çaycı, Hatice Sinem and Ciftci, Cihan (2018) Investigation of compressive performance of 3D printed carbon fiber reinforced plastics. In: SAMPE Long Beach 2018 Conference and Exhibition, Long Beach, CA, usa

Kefal, Adnan and Haşim, Ahmet Kazım and Yıldız, Mehmet (2018) Isogeometric analysis of moderately thick composite beams and plates based on refined zigzag theory. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Kefal, Adnan and Sohouli, A. and Öterkuş, E. and Yıldız, Mehmet and Suleman, A. (2018) Topology optimization of cracked structures using peridynamics. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Madenci, Erdoğan and Kefal, Adnan and Dördüncü, Mehmet and Barut, Atila and Yıldız, Mehmet (2018) Isogeometric analysis using peridynamics and XFEM. In: 59th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Kissimmee, USA

Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Koç, Bahattin (2018) Nanocomposite hydrogels of agarose/nanosilicates for 3D bioprinting applications. In: Biofabrication Conference 2018, Wurzberg, Germany

Özcan, Yiğit and Tunç, Lütfi Taner (2018) Investigation of surface mophology and integrity in multi axis abrasive waterjet machining (AWJM). In: International Symposium on Machining, Antalya, Turkey

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Kinematic based selection of the workpiece location in robotic milling. In: International Symposium on Machining, Antalya, Turkey

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Tool axis optimization for robotic 5-axis milling considering kinematics. In: 14th Conference on High Speed Machining Conference, San Sebastian (Accepted)

Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter (2018) Identification of the CIRP expertise network based on public data. In: 51st CIRP Conference on Manufacturing Systems, Stockholm, Sweden

Yılmaz, C. and Akalın, C. and Günal, I. and Çelik, H. and Büyük, M. and Suleman, A. and Yıldız, Mehmet (2018) Observation of damage accumulation under in-plane shear loading. In: Specialists' Meeting AVT-305 on Sensing Systems for Integrated Vehicle Health Management (IVHM) of Military Vehicles (NATO STO AVT-305), Athens, Greece

Yildirim, Afsin T. and Eroglu, Fatih and Yesilyurt, Ogulcan and Albayrak, Kubilay and Şaş Çaycı, Hatice Sinem and Ciftci, Cihan (2018) Effect of ambient temperature on the flexural behavior of 3D printed composite beams. In: SAMPE Long Beach 2018 Conference and Exhibition, Long Beach, CA, USA

Zaki, Hammad and Ünel, Mustafa (2018) Control of a hovering quadrotor UAV subject to periodic disturbances. In: 6th International Conference on Control Engineering & Information Technology (CEIT), Istanbul, Turkey

Book Section / Chapter

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Self-healing thermosetting composites: concepts, chemistry and future advances. In: Delville, Marie-Helene and Taubert, Andreas, (eds.) Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials. Wiley, UK. ISBN 9783527342556 (Print) 9783527807130 (Online)