Items where Division is "Manufacturing Systems Eng." and Year is 2021

Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | H | J | K | M | O | P | R | S | T | Y | Ç
Number of items: 36.

A

Abdollahzadeh, Mohammadamin and Tabrizi, Isa Emami and Kefal, Adnan and Yıldız, Mehmet (2021) A combined experimental/numerical study on deformation sensing of sandwich structures through inverse analysis of pre-extrapolated strain measurements. Measurement: Journal of the International Measurement Confederation, 185 . ISSN 0263-2241 (Print) 1873-412X (Online)

Alexiadis, Alessio and Albano, Andrea and Rahmat, Amin and Yıldız, Mehmet and Kefal, Adnan and Özbulut, Murat and Bakırcı, Nadi and Garzon Alvarado, Diego Alexander and Duque-Daza, Carlos Alberto and Eslava-Schmalbach, Javier Hernando (2021) Simulation of pandemics in real cities: enhanced and accurate digital laboratories. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2245). ISSN 1364-5021 (Print) 1471-2946 (Online)

Almasi, F. and Shadloo, M. S. and Hadjadj, A. and Özbulut, M. and Tofighi, Nima and Yıldız, Mehmet (2021) Numerical simulations of multi-phase electro-hydrodynamics flows using a simple incompressible smoothed particle hydrodynamics method. Computers and Mathematics with Applications (SI), 81 . pp. 772-785. ISSN 0898-1221 (Print) 1873-7668 (Online)

B

Balkan, Muhammed Enes (2021) Thermochemical modelling and directed energy deposition of copper-nickel functionally gradient materials. [Thesis]

Barzegar Osgouei, Zahra (2021) A novel analytical temprature model development for turning in orthogonal and oblique conditions including the effects of all deformation zones and tool wear. [Thesis]

Bayraktar, Can (2021) Development of a thermomechanical finite element model for laser powder bed fusion process and its comparison with inherent strain method. [Thesis]

Bilal, Diyar Khalis and Ünel, Mustafa (2021) Increasing trajectory tracking accuracy of industrial robots using SINDYc. In: 4th IFAC Conference on Embedded Systems, Computational Intelligence and Telematics in Control, CESCIT 2021, Valenciennes, France

Bilal, Diyar Khalis and Ünel, Mustafa (2021) Increasing trajectory tracking accuracy of industrial robots using SINDYc. (Accepted)

Budaklı, Mete and Salem, Thamer K. and Arik, Mehmet and Dönmez, Barça and Menceloğlu, Yusuf Z. (2021) An experimental study on the heat transfer and wettability characteristics of micro-structured surfaces during water vapor condensation under different pressure conditions. International Communications in Heat and Mass Transfer, 120 . ISSN 0735-1933 (Print) 1879-0178 (Online)

C

Candau, Nicolas and Stoclet, Gregory and Tahon, Jean François and Demongeot, Adrien and Yilgor, Emel and Yilgor, İskender and Menceloğlu, Yusuf Z. and Oğuz, Oğuzhan (2021) Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers. Polymer, 223 . ISSN 0032-3861 (Print) 1873-2291 (Online)

D

Demir, Eralp and Gutierrez-Urrutia, Ivan (2021) Investigation of strain hardening near grain boundaries of an aluminum oligocrystal: experiments and crystal based finite element method. International Journal of Plasticity, 136 . ISSN 0749-6419 (Print) 1879-2154 (Online)

Dörtkaşlı, Kerem (2021) Thermal finite element model to compute melt pool dimensions for directed energy deposition additive manufacturing process with experimental validation. [Thesis]

H

Habibian, Anahita and Sohouli, Abdolrasoul and Kefal, Adnan and Nadler, Ben and Yıldız, Mehmet and Suleman, Afzal (2021) Multi-material topology optimization of structures with discontinuities using peridynamics. Composite Structures, 258 . ISSN 0263-8223 (Print) 1879-1085 (Online)

J

Jamshidi, Hamid (2021) Analytical modeling of grinding process for improved productivity, part quality and material properties. [Thesis]

Jamshidi, Hamid and Budak, Erhan (2021) A 3D analytical thermal model in grinding considering a periodic heat source under dry and wet conditions. Journal of Materials Processing Technology, 295 . ISSN 0924-0136 (Print) 1873-4774 (Online)

K

Kefal, Adnan and Emami Tabrizi, Isa and Tansan, Murat and Kısa, Erdal and Yıldız, Mehmet (2021) An experimental implementation of inverse finite element method for real-time shape and strain sensing of composite and sandwich structures. Composite Structures, 258 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet (2021) Real-time monitoring of crack propagation in fiber-reinforced composite plates using iFEM methodology. In: 8th International Conference on Marine Structures (MARSTRUCT), Trondheim, Norway

Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet and Tessler, Alexander (2021) A smoothed iFEM approach for efficient shape-sensing applications: numerical and experimental validation on composite structures. Mechanical Systems and Signal Processing, 152 . ISSN 0888-3270 (Print) 1096-1216 (Online)

Koç, Bahattin and Acar, Anıl Ahmet and Fallah, Ali and Daskalakis, Evangelos and Xu, Zhanyan and Omar, Abdalla M. and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Bartolo, Paulo (2021) Designing novel synthetic grafts for large bone defects: experimental and numerical studies. In: Kyratsis, Panagiotis and Davim, J. Paulo, (eds.) Experiments and simulations in advanced manufacturing. Springer, Cham, Switzerland, pp. 71-89. ISBN 978-3-030-69471-5 (print), 978-3-030-69472-2 (online)

Kolukısa, Deniz Can and Özbulut, Murat and Yıldız, Mehmet (2021) The effect of iterative procedures on the robustness and fidelity of augmented lagrangian SPH. Symmetry, 13 (3). ISSN 2073-8994

M

Massarwa, Eyass and Emami Tabrizi, Isa and Yıldız, Mehmet (2021) Mechanical behavior and failure of glass/carbon fiber hybrid composites: multiscale computational predictions validated by experiments. Composite Structures, 260 . ISSN 0263-8223 (Print) 1879-1085 (Online)

O

Oğuz, Oğuzhan and Candau, Nicolas and Demongeot, Adrien and Çıtak, Mehmet Kerem and Çetin, Fatma Nalan and Stoclet, Grégory and Michaud, Véronique and Menceloğlu, Yusuf Z. (2021) Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing. Polymer Engineering and Science (SI), 61 (4). pp. 1028-1040. ISSN 0032-3888 (Print) 1548-2634 (Online)

P

Piluso, Susanna and Akdeniz Skvortsov, Gözde and Altunbek, Mine and Afghah, Seyedeh Ferdows and Khani, Navid and Koç, Bahattin and Patterson, Jennifer (2021) 3D Bioprinting of molecularly engineered PEG-based hydrogels utilizing gelatin fragments. Biofabrication, 13 (4). ISSN 1758-5082 (Print) 1758-5090 (Online)

R

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2021) An improved ordinary-state based peridynamic formulation for modeling FGMs with sharp interface transitions. International Journal of Mechanical Sciences, 197 . ISSN 0020-7403 (Print) 1879-2162 (Online)

S

Saghatchi, Roozbeh and Özbulut, Murat and Yıldız, Mehmet (2021) Dynamics of double emulsion interfaces under the combined effects of electric field and shear flow. Computational Mechanics, 68 (4). pp. 775-793. ISSN 0178-7675 (Print) 1432-0924 (Online)

Seyednourani, Mahsa and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2021) A two-stage optimization methodology for gate and vent locations and distribution media layout for liquid composite molding process. Composites Part A: Applied Science and Manufacturing, 149 . ISSN 1359-835X (Print) 1878-5840 (Online)

Seyyed Monfared Zanjani, Jamal and Yousefi Louyeh, Pouya and Emami Tabrizi, Isa and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2021) Thermo-responsive and shape-morphing CF/GF composite skin: full-field experimental measurement, theoretical prediction, and finite element analysis. Thin-Walled Structures, 160 . ISSN 0263-8231 (Print) 1879-3223 (Online)

Shafighfard, Torkan and Cender, Thomas A. and Demir, Eralp (2021) Additive manufacturing of compliance optimized variable stiffness composites through short fiber alignment along curvilinear paths. Additive Manufacturing, 37 . ISSN 2214-8604 (Print) 2214-7810 (Online)

Steckel, Jan Christoph and Renner, Sebastian and Missbach, Leonard (2021) Distributional impacts of carbon pricing in low and middle-income countries. CESifo Forum, 22 (5). pp. 26-32. ISSN 1615-245X (Print) 2190-717X (Online)

Sümbül Boztaş, Ayşe Nur (2021) Cure cycle determination of neat and nano-reinforced carbon/epoxy composites used in aerospace applications through investigation of cure kinetics by differentaial scanning calorimetry and rheometer. [Thesis]

T

Tehranizadeh, Faraz (2021) Design and optimization of end mills with special geometries for high productivity and their use in different applications. [Thesis]

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan (2021) Dalgalı talaş yüzeyli takımların kararlılık analizi ve takım optimizasyonu [Stability analysis of crest-cut end mills and the optimization of tool geometry]. In: 11th International Congress on Machining (UTIS), Virtual

Tofighi, N. and Feng, J. J. and Yıldız, Mehmet and Suleman, A. (2021) Long term sedimentation of an elliptic disc subject to an electrostatic field using smoothed particle hydrodynamics method. International Journal of Multiphase Flow, 135 . ISSN 0301-9322 (Print) 1879-3533 (Online)

Y

Yıldız, Saltuk and Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yavaş, Çağlar and Kurt, Seçil and Budak, Erhan (2021) Evaluation of carbide end mills with different cutting geometries in machining of a titanium alloy. In: 11th International Congress on Machining (UTIS), Virtual

Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan (2021) Gantry optimization of a 5-axis cnc machine tool considering dynamic modes. In: 11th International Congress on Machining (UTIS), Virtual

Ç

Çetin, Beril (2021) Parameter selection approach and optimization in abrasive water jet machining. [Thesis]

This list was generated on Fri Mar 29 03:00:50 2024 +03.