Items where Division is "Manufacturing Systems Eng." and Year is 2016

Ahmed, Faran and Kılıç, Kemal (2016) Comparison of fuzzy extent analysis technique and its extensions with original eigen vector approach. In: 18th International Conference on Enterprise Information Systems (ICEIS 2016), Rome, Italy

Akhlaghi Baghoojari, Omid and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) Rheological behavior of poly(acrylonitrile) concentrated solutions: effect of Sb2O3 nanoparticles on shear and extensional flow. Colloid and Polymer Science, 294 (9). pp. 1463-1473. ISSN 0303-402X (Print) 1435-1536 (Online)

Aksu, Burak and Çelebi, Ceren and Budak, Erhan (2016) An experimental investigation of oblique cutting mechanics. Machining Science and Technology, 20 (3). pp. 495-521. ISSN 1091-0344 (Print) 1532-2483 (Online)

Azvar, Milad and Budak, Erhan (2016) Multi-dimensional modelling of chatter stability in parallel turning operation. In: 17th International Conference on Machine Design and Production, Bursa, Turkey

Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and İnce, Gözde and Koç, Bahattin (2016) Cell sheet as a bioink for 3D bioprinting. In: Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden

Budak, Erhan and Özlü, Emre and Bakioğlu, Hayri and Barzegar Osgouei, Zahra (2016) Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces. CIRP Annals - Manufacturing Technology, 65 (1). pp. 121-124. ISSN 0007-8506 (Print) 1726-0604 (Online)

Carlier, Aurelli and Akdeniz Skvortsov, Gözde and Hafezi, Forough and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin and Oosterwyck, Hans Van (2016) Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering. Biofabrication, 8 (2). ISSN 1758-5082 (Print) 1758-5090 (Online)

Çomak, Alptunç and Budak, Erhan (2016) Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability. (Accepted)

Dayanık, Savaş and Sezer, Semih Onur (2016) Sequential sensor installation for Wiener disorder detection. Mathematics of Operations Research, 41 (3). pp. 827-850. ISSN 0364-765X (Print) 1526-5471 (Online)

Demir, Eralp (2016) 3D suspension characterization of a rapid transit vehicle using a multi-body dynamic model. Urban Rail Transit, 2 (3-4). pp. 172-187. ISSN 2199-6687 (Print) 2199-6679 (Online)

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2016) Modeling and measurement of cutting temperatures in milling. In: 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnitz, Germany

Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2016) Effects of tool axis offset in turn-milling process. Journal of Materials Processing Technology, 231 . pp. 239-247. ISSN 0924-0136

Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study. Materials & Design, 109 . pp. 123-132. ISSN 0264-1275 (Print) 1873-4197 (Online)

Nadernezhad, Ali and Khani, Navid and Akdeniz Skvortsov, Gözde and Toprakhisar, Burak and Bakırcı, Ezgi and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koç, Bahattin (2016) Multifunctional 3D printing of heterogeneous hydrogel structures. Scientific Reports, 6 . ISSN 2045-2322

Noyan, Nilay and Balçık, Burcu and Atakan, Semih (2016) A stochastic optimization model for designing last mile relief networks. Transportation Science, 50 (3). pp. 1092-1113. ISSN 0041-1655 (Print) 1526-5447 (Online)

Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) Generalized model for dynamics and stability of multi-axis milling with complex tool geometries. Journal of Materials Processing Technology, 238 . pp. 446-458. ISSN 0924-0136 (Print) 1873-4774 (Online)

Özler, Saime Burçe and Bakırcı, Ezgi and Küçükgül, Can and Koç, Bahattin (2016) Three-dimensional direct cell bioprinting for tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials . ISSN 1552-4973 (Print) 1552-4981 (Online) Published Online First http://dx.doi.org/10.1002/jbm.b.33768

Öztürk, Erdem and Çomak, Alptunç and Budak, Erhan (2016) Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes. Journal of Sound and Vibration, 360 . pp. 17-30. ISSN 0022-460X (Print) 1095-8568 (Online)

Toprakhisar, Burak and Bakırcı, Ezgi and Koç, Bahattin (2016) 3D bioprinting stem-cells with solubilized tendon extracellular matrix (ECM) based hydrogel. In: Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden

Tunç, Lütfi Taner (2016) Rapid extraction of machined surface data through inverse geometrical solution of tool path information. International Journal of Advanced Manufacturing Technology, 87 (1-4). pp. 353-362. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Budak, Erhan and Bilgen, Samet and Zatarain, Mikel (2016) Process simulation integrated tool axis selection for 5-axis tool path generation. CIRP Annals - Manufacturing Technology, 65 (1). pp. 381-384. ISSN 0007-8506 (Print) 1726-0604 (Online)

Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Budak, Erhan (2016) Machining strategy development and parameter selection in 5-axis milling based on process simulations. International Journal of Advanced Manufacturing Technology, 85 (5-8). pp. 1483-1500. ISSN 0268-3768 (Print) 1433-3015 (Online)

Yelbay, Belma and Birbil, Ş. İlker and Bülbül, Kerem and Jamil, Hasan M. (2016) Approximating the minimum hub cover problem on planar graphs. Optimization Letters, 10 (1). pp. 33-45. ISSN 1862-4472 (Print) 1862-4480 (Online)

Yılmaz, E. E. and Budak, Erhan and Özgüven, H. Nevzat (2016) Modeling and measurement of micro end mill dynamics using inverse stability approach. In: 7th CIRP Conference on High Performance Cutting (HPC 2016), Chemnizt, Germany