Items where Division is "Mechatronics" and Year is 2020

Abbasiasl, Taher (2020) Spray formation under the effect of micro scale cavitation and its biomedical applications. [Thesis]

Abbasiasl, Taher and Niazi, Soroush and Sheibani Aghdam, Araz and Chen, Hongjian and Cebeci, Fevzi Çakmak and Ghorbani, Morteza and Grishenkov, Dmitry and Koşar, Ali (2020) Effect of intensified cavitation using poly(vinyl alcohol) microbubbles on spray atomization characteristics in microscale. AIP Advances, 10 (2). ISSN 2158-3226

Aboubakri, Akam and Ebrahimpour Ahmadi, Vahid and Koşar, Ali (2020) Modeling of a passive-valve piezoelectric micro-pump: a parametric study. Micromachines, 11 (8). ISSN 2072-666X

Aboubakri, Akam and Yanık, Cenk and Akkuş, Yiğit and Koşar, Ali and Sadaghiani, Abdolali Khalili (2020) Numerical and experimental investigation on evaporation of water droplet on surfaces with mixed wettability. In: ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2020, collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 Fluids Engineering Division Summer Meeting, Virtual, Online

Acar, Gizem and Alijani Alijanvand, Hossein and Koşar, Ali and Yapıcı, Murat Kaya (2020) An ISFET sensor-integrated micromixer for pH measurements. In: 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Cracow, Poland

Altay, Rana (2020) Fluid mixing efficiency enhancement in microchannels having spiral elliptic and curved structures with various baffle geometries. [Thesis]

Altay, Rana and Sadaghiani, Abdolali Khalili and Sevgen, İlker and Şişman, Alper and Koşar, Ali (2020) Numerical and experimental studies on the effect of surface roughness and ultrasonic frequency on bubble dynamics in acoustic cavitation. Energies, 13 (5). ISSN 1996-1073

Anamagh, Mirmeysam Rafiei and Bediz, Bekir (2020) Free vibration and buckling behavior of functionally graded porous plates reinforced by graphene platelets using spectral Chebyshev approach. Composite Structures, 253 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Aydın, Yusuf and Tokatlı, Ozan and Patoğlu, Volkan and Başdoğan, Çağatay (2020) A computational multicriteria optimization approach to controller design for physical human-robot interaction. IEEE Transactions on Robotics, 36 (6). pp. 1791-1804. ISSN 1552-3098 (Print) 1941-0468 (Online)

Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner (2020) Improved vision based pose estimation for industrial robots via sparse regression. In: 16th International Conference on Intelligent Computing, ICIC 2020, Bari, Italy

Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner (2020) Improving vision based pose estimation using LSTM neural networks. In: 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), Singapore

Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin (2020) Localization and estimation of bending and twisting loads using neural networks. In: 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), Singapore

Boğatarkan, Aysu and Erdem, Esra and Kleiner, Alexander and Patoğlu, Volkan (2020) Multi-modal multi-agent path finding with optimal resource utilization. In: 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2020), Belgrade, Serbia

Çaldağ, Hakan Osman (2020) Stabilitiy, control and acoustic manipulation of magnetically actuated helical swimmers. [Thesis]

Çaldağ, Hakan Osman and Yeşilyurt, Serhat (2020) A simple numerical tool for the evaluation of acoustic radiation force on helices. In: IEEE International Ultrasonics Symposium (IUS), Las Vegas, NV, USA

Çaldağ, Hakan Osman and Yeşilyurt, Serhat (2020) Steering control of magnetic helical swimmers in swirling flows due to confinement. In: IEEE International Conference on Robotics and Automation (ICRA), Paris, France

Çalışkan, Umut and Patoğlu, Volkan (2020) Efficacy of haptic pedal feel compensation on driving with regenerative braking. IEEE Transactions on Haptics, 13 (1). pp. 175-182. ISSN 1939-1412 (Print) 2329-4051 (Online)

Çetin, Gökalp (2020) Network topologies for long armature linear motor multi-car elevator systems. [Thesis]

Ebrahimpour Ahmadi, Vahid and Aboubakri, Akam and Sadaghiani, Abdolali Khalili and Sefiane, Khellil and Koşar, Ali (2020) Effect of functional surfaces with gradient mixed wettability on flow boiling in a high aspect ratio microchannel. Fluids, 5 (4). ISSN 2311-5521

Elitaş, Meltem and Şengül, Esra (2020) Quantifying heterogeneity according to deformation of the U937 monocytes and U937-differentiated macrophages using 3D carbon dielectrophoresis in microfluidics. Micromachines, 11 (6). ISSN 2072-666X

Erdem, Kaan and Ebrahimpour Ahmadi, Vahid and Koşar, Ali and Kuddusi, Lutfullah (2020) Differential sorting of microparticles using spiral microchannels with elliptic configurations. Micromachines, 11 (4). ISSN 2072-666X

Ertaş Uslu, Merve and Mısırlıoğlu, Burç and Şendur, Kürşat (2020) Crossover of spectral reflectance lineshapes in Ge-doped VO2 thin films. Optical Materials, 104 . ISSN 0925-3467 (Print) 1873-1252 (Online)

Ghorbani, Morteza and Sheibani Aghdam, Araz and Talebian Gevari, Moein and Koşar, Ali and Cebeci, Fevzi Çakmak and Grishenkov, Dmitry and Svagan, Anna J. (2020) Facile hydrodynamic cavitation on chip via cellulose nanofibers stabilized perfluorodroplets inside layer-by-layer assembled slips surfaces. Chemical Engineering Journal, 382 . ISSN 1385-8947 (Print) 1873-3212 (Online)

Görgün, Erdem (2020) Leakage performance evaluation of cloth seal. [Thesis]

Görgün, Erdem and Akşit, Mahmut Faruk and Doğu, Yahya (2020) A study of cloth seal leakage performance based on geometry and pressure load. Energies, 13 (22). ISSN 1996-1073

Görgün, Erdem and Doğu, Yahya and Akşit, Mahmut Faruk (2020) Investigation of flow behavior and porous medium resistance coefficients for metallic-cloth fibers. Fibers, 8 (12). ISSN 2079-6439

Hosseinpour Shafaghi, Ali and Rokhsar Talabazar, Farzad and Koşar, Ali and Ghorbani, Morteza (2020) On the effect of the respiratory droplet generation condition on COVID-19 transmission. Fluids, 5 (3). ISSN 2311-5521

Jamshidi, Hamid and Budak, Erhan (2020) An analytical grinding force model based on individual grit interaction. Journal of Materials Processing Technology, 283 . ISSN 0924-0136 (Print) 1873-4774 (Online)

Janipour, Mohsen and Şendur, Kürşat (2020) Enhancing spectral reflection through controlled phase distribution using doped polar-dielectric metasurfaces. Materials, 13 (9). ISSN 1996-1944

Kara, Özdemir Can and Patoğlu, Volkan (2020) VnStylus: a haptic stylus with variable tip compliance. IEEE Transactions on Haptics, 13 (4). pp. 777-790. ISSN 1939-1412 (Print) 2329-4051 (Online)

Karamahmutoğlu, Hande and Altay, Alara and Vural Kaymaz, Sümeyra and Elitaş, Meltem (2020) Quantitative investigation into the influence of intravenous fluids on human immune and cancer cell lines. Scientific Reports, 10 . ISSN 2045-2322

Keçebaş, Muhammed Ali (2020) Design of spectrally selective surfaces. [Thesis]

Keçebaş, Muhammed Ali and Mengüç, M. Pınar and Koşar, Ali and Şendur, Kürşat (2020) Spectrally selective filter design for passive radiative cooling. Journal of the Optical Society of America B, 37 (4). pp. 1173-1182. ISSN 0740-3224 (Print) 1520-8540 (Online)

Mohammadi, Ali and Koşar, Ali (2020) The effect of arrangement type and pitch ratio on the performance of micro-pin-fin heat sinks. Journal of Thermal Analysis and Calorimetry, 140 (3). pp. 1057-1068. ISSN 1388-6150 (Print) 1572-8943 (Online)

Mohammadpour Chehrghani, Mirvahid and Abbasiasl, Taher and Gharib, Ghazaleh and Koşar, Ali and Sadaghiani, Abdolali Khalili (2020) Steam flow condensation on superhydrophobic surfaces in a high aspect ratio microchannel. In: ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2020, collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 Fluids Engineering Division Summer Meeting, Virtual, Online

Motlagh, Peyman Lahe and Bediz, Bekir and Başdoğan, İpek (2020) A spectral Tchebychev solution for electromechanical analysis of thin curved panels with multiple integrated piezo-patches. Journal of Sound and Vibration, 486 . ISSN 0022-460X (Print) 1095-8568 (Online)

Mumcuoğlu, Mehmet Emin and Alcan, Gökhan and Ünel, Mustafa and Çiçek, Onur and Mutluergil, Mehmet and Yılmaz, Metin and Köprübaşı, Kerem (2020) Driver evaluation in heavy duty vehicles based on acceleration and braking behaviors. In: 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), Singapore

Orhan, Zeynep Özge (2020) Co-design optimization for lever-type variable stiffness actuation. [Thesis]

Pehlivan, Ahmet Selim and Erbatur, Kemalettin (2020) Genetic algorithm optimization of PID pitch angle controller for a 2 MW wind turbine. In: International 2nd Conference on Sustainable Energy and Energy Calculations (ICSEEC2020), Online Live Conference

Pehlivan, Ahmet Selim and Erbatur, Kemalettin (2020) Performance comparison of pitch angle controllers for 2 MW wind turbine. In: International 2nd Conference on Sustainable Energy and Energy Calculations (ICSEEC2020), Online Live Conference

Rizwan, Momina and Patoğlu, Volkan and Erdem, Esra (2020) Human robot collaborative assembly planning: an answer set programming approach. Theory and Practice of Logic Programming (SI), 20 (6). pp. 1006-1020. ISSN 1471-0684 (Print) 1475-3081 (Online)

Sadaghiani, Abdolali Khalili and Altay, Rana and Noh, H. and Kwak, H. J. and Şendur, Kürşat and Mısırlıoğlu, Burç and Park, H. S. and Koşar, Ali (2020) Effects of bubble coalescence on pool boiling heat transfer and critical heat flux - a parametric study based on artificial cavity geometry and surface wettability. International Journal of Heat and Mass Transfer, 147 . ISSN 0017-9310 (Print) 1879-2189 (Online)

Sadaghiani, Abdolali Khalili and Rajabnia, Hossein and Çelik, Süleyman and Noh, H. and Kwak, H. J. and Nejatpour, Mona and Park, Hyun Sun and Acar, H. Y. and Mısırlıoğlu, Burç and Özdemir, Mehmed Rafet and Koşar, Ali (2020) Pool boiling heat transfer of ferrofluids on structured hydrophilic and hydrophobic surfaces: the effect of magnetic field. International Journal of Thermal Sciences, 155 . ISSN 1290-0729 (Print) 1778-4166 (Online)

Serhat, Gokhan and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Basdogan, Ipek (2020) Dynamic analysis of doubly curved composite panels using lamination parameters and spectral-Tchebychev method. Computers and Structures, 239 . ISSN 0045-7949

Serhat, Gökhan and Bediz, Bekir and Başdoğan, İpek (2020) Unifying lamination parameters with spectral-Tchebychev method for variable-stiffness composite plate design. Composite Structures, 242 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Sirichotiyakul, Wankun and Patoğlu, Volkan and Satici, Aykut C. (2020) Efficient singularity-free workspace approximations using sum-of-squares programming. Journal of Mechanisms and Robotics, 12 (6). ISSN 1942-4302 (Print) 1942-4310 (Online)

Sohouli, Abdol Rasoul and Kefal, Adnan and Abdelhamid, Ahmed and Yıldız, Mehmet and Suleman, Afzal (2020) Continuous density-based topology optimization of cracked structures using peridynamics. Structural and Multidisciplinary Optimization, 62 (5). pp. 2375-2389. ISSN 1615-147X (Print) 1615-1488 (Online)

Sümer, Yavuz (2020) Design, analysis, and manufacturing of a multifunctional parallelogram gangway mechanism. [Thesis]

Şahin, Osman and Elitaş, Meltem and Yapıcı, Murat Kaya (2020) Simulation of dielectrophoresis based separation of red blood cells (RBC) from bacteria cells. In: 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Cracow, Poland

Şengül, Esra and Kara, Osman and Yıldızhan, Yağmur and Martinez-Duarte, Rodrigo and Elitaş, Meltem (2020) Single cell level dielectrophoretic responses & dielectrophoretic deformations of monocytes to quantify population heterogeneity. In: 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), Montreal, QC, Canada

Şimşek, Uğur and Gayir, Cemal Efe and Kızıltaş, Güllü and Şendur, Polat (2020) An integrated homogenization-based topology optimization via RBF mapping strategies for additively manufactured FGLS and its application to bandgap structures. International Journal of Advanced Manufacturing Technology, 111 (5-6). pp. 1361-1374. ISSN 0268-3768 (Print) 1433-3015 (Online)

Şirintuna, Doğanay and Aydın, Yusuf and Çaldıran, Ozan and Tokatlı, Ozan and Patoğlu, Volkan and Başdoğan, Çağatay (2020) A variable-fractional order admittance controller for pHRI. In: IEEE International Conference on Robotics and Automation (ICRA), Paris, France

Talebian Gevari, Moein (2020) Hydrodynamic cavitation on high resistant microfluidic chips. [Thesis]

Talebian Gevari, Moein and Abbasiasl, Taher and Niazi, Soroush and Ghorbani, Morteza and Koşar, Ali (2020) Direct and indirect thermal applications of hydrodynamic and acoustic cavitation: a review. Applied Thermal Engineering, 171 . ISSN 1359-4311

Talebian Gevari, Moein and Hosseinpour Shafaghi, Ali and Villanueva, Guillermo and Ghorbani, Morteza and Koşar, Ali (2020) Engineered lateral roughness element implementation and working fluid alteration to intensify hydrodynamic cavitating flows on a chip for energy harvesting. Micromachines, 11 (1). ISSN 2072-666X

Talebian Gevari, Moein and Koşar, Ali and Yapıcı, Murat Kaya (2020) Passive micromixer with sharp edges: simulation and optimization. In: 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Cracow, Poland

Talebian Gevari, Moein and Parlar, Ayhan and Torabfam, Milad and Koşar, Ali and Yüce, Meral and Ghorbani, Morteza (2020) Influence of fluid properties on intensity of hydrodynamic cavitation and deactivation of salmonella typhimurium. Processes, 8 (3). ISSN 2227-9717

Tosun, Fatih Emre and Patoğlu, Volkan (2020) Necessary and sufficient conditions for the passivity of impedance rendering with velocity-sourced series elastic actuation. IEEE Transactions on Robotics, 36 (3). pp. 757-772. ISSN 1552-3098 (Print) 1941-0468 (Online)

Yetişgin, Abuzer Alp and Çetinel, Sibel and Zuvin, Merve and Koşar, Ali and Kutlu, Özlem (2020) Therapeutic nanoparticles and their targeted delivery applications. Molecules, 25 (9). ISSN 1420-3049

Yüksel, Esra and Ertürk, Ahmet Semih and Budak, Erhan (2020) A hybrid contact implementation framework for finite element analysis and topology optimization of machine tools. Journal of Manufacturing Science and Engineering, 142 (8). ISSN 1087-1357 (Print) 1528-8935 (Online)

Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan (2020) Design and analysis of a 5-axis gantry CNC machine tool. In: 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), Thessaloniki, Greece