Items where Division is "Materials Science & Eng." and Year is 2019

Abdolhosseinzadeh, Sina and Mousavi, Mirsajjad and Haghmoradi, Navid and Alkan Gürsel, Selmiye (2019) A continuous-flow photocatalytic reactor for the precisely controlled deposition of metallic nanoparticles. Journal of Visualized Experiments (JoVE), 146 . ISSN 1940-087X

Acar, Gizem and Öztürk, Özberk and Jedari Golparvar, Ata and Elboshra, Tamador Alkhidir and Bohringer, Karl and Yapıcı, Murat Kaya (2019) Wearable and flexible textile electrodes for biopotential signal monitoring: a review. Electronics, 8 (5). ISSN 2079-9292

Alas, Melis and Güngör, Ahmet and Genç, Rükan and Erdem, Emre (2019) Feeling the power: robust supercapacitors from nanostructured conductive polymers fostered with Mn2+ and carbon dots. Nanoscale, 11 (27). pp. 12804-12816. ISSN 2040-3364 (Print) 2040-3372 (Online)

Ali, Hafiz Qasim (2019) Experimental study on static and dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors, acoustic emission, digital image correlation and scanning electron microscopy. [Thesis]

Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Seyyed Monfared Zanjani, Jamal and Yılmaz, Çağatay and Haghighi Poudeh, Leila and Yıldız, Mehmet (2019) Experimental study on dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors. Smart Materials and Structures, 28 (10). ISSN 0964-1726 (Print) 1361-665X (Online)

Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Tufani, Ali and Yıldız, Mehmet (2019) Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission. Composite Structures, 230 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Alijani Alijanvand, Hossein and Özbey, Arzu and Karimzadehkhouei, Mehrdad and Koşar, Ali (2019) Inertial micromixing in curved serpentine micromixers with different curve angles. Fluids, 4 (4). ISSN 2311-5521

Alpat, Behçet and Gülgün, Mehmet Ali and Çorapcıoğlu, Gülcan and Yıldızhan, Melike Mercan and Lazzaro, Paolo Di and Murra, Daniele and Kaplanoğlu, Tevfik and Postolache, Vasile and Mengali, Sandro and Simeoni, Mirko and Urbani, Alessandro (2019) Testing of substrates for flexible optical solar reflectors: irradiations of nano-hybrid coatings of polyimide films with 20 keV electrons and with 200-400 nm ultraviolet radiation. Journal of Instrumentation, 14 (6). ISSN 1748-0221

Anamagh, Mirmeysam Rafiei and Bediz, Bekir (2019) Three-dimensional dynamics of functionally graded and laminated doubly-curved composite structures having arbitrary geometries and boundary conditions. Composites Part B: Engineering, 172 . pp. 533-546. ISSN 1359-8368 (Print) 1879-1069 (Online)

Anıl, Deniz (2019) Halloysite containing polyurethane foams as insulation materials with enhanced flame retardance. [Thesis]

Arabyazdı, S. and Yazdanpanah, A. and Ansari Hamedani, Ali and Ramedani, A. and Mortarzadeh, F. (2019) Synthesis and characterization of CaO-P2O5-SiO2-Li2O-Fe2O3 bioactive glasses: the effect of Li2O-Fe2O3 content on the structure and in-vitro bioactivity. Journal of Non-Crystalline Solids, 503-50 . pp. 139-150. ISSN 0022-3093 (Print) 1873-4812 (Online)

Arıcı, Ece and Yarar Kaplan, Begüm and Mert, Ahmet Musap and Alkan Gürsel, Selmiye and Kınayyiğit, Şölen (2019) An effective electrocatalyst based on platinum nanoparticles supported with graphene nanoplatelets and carbon black hybrid for PEM fuel cells. International Journal of Hydrogen Energy, 44 (27). pp. 14175-14183. ISSN 0360-3199 (Print) 1879-3487 (Online)

Asghari Arpatappeh, Farzin and Aydemir, Berk Emre and Bilge, Kaan and Papila, Melih (2019) Multiscale reinforcing interlayers of self-same P(St-co-GMA) nanofibers loaded with MCF for polymer composites and nanocomposites. In: AIAA Scitech Forum, 2019, San Diego, United States

Avaz, Merve Senem and Taştan, Ömer Faruk and Taş, Cüneyt Erdinç and Ünal, Hayriye and İnce, İkbal Agah and Menceloğlu, Yusuf Z. (2019) Insecticide-releasing LLDPE films as greenhouse cover materials. Materials Today Communications, 19 . pp. 170-176. ISSN 2352-4928

Avcıoğlu, Suna and Kaya, Figen and Kaya, Cengiz (2019) Optimization of sol-gel synthesized preceramic polymer precursors for fabrication of high purity boron carbide (B4C) powders. In: International Symposium on Boron (BORON2019), Nevsehir, Turkey

Azeemi, Rehman Yousuf and Erğun, Rıdvan and Taşdemir, Adnan and Alkan Gürsel, Selmiye and Yürüm, Alp (2019) A simple spray assisted method to fabricate high performance layered graphene/silicon hybrid anodes for lithium-ion batteries. International Journal of Hydrogen Energy, 44 (36). pp. 20267-20277. ISSN 0360-3199 (Print) 1879-3487 (Online)

Bahmani Jalali, Houman and Sadeghi, Sadra and Şahin, Mehmet and Öztürk, Hande and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2019) Colloidal aluminum antimonide quantum dots. Chemistry of Materials, 31 (13). pp. 4743-4747. ISSN 0897-4756 (Print) 1520-5002 (Online)

Bajwa, Rayan and Yapıcı, Murat Kaya (2019) Intrinsic stress-induced bending as a platform technology for controlled self-assembly of high-Q on-chip RF inductors. Journal of Micromechanics and Microengineering, 29 (6). ISSN 0960-1317 (Print) 1361-6439 (Online)

Bakhtiari, Bahareh (2019) Fabrication of graphene oxide and graphene foams for Li-ion batteries. [Thesis]

Belce, Yonca (2019) Functional thin film coatings of porphyrins and phthalocyanines by layer-by-layer assembly. [Thesis]

Belce, Yonca and Cebeci, Fevzi Çakmak (2019) Investigation of pH and concentration influence on layer-by-layer self-assembly for nickel(II)phthalocyanine-tetrasulfonic acid tetrasodium salt coatings. Journal of Porphyrins and Phthalocyanines, 23 (1-2). pp. 84-90. ISSN 1088-4246 (Print) 1099-1409 (Online)

Belce, Yonca and Cebeci, Fevzi Çakmak (2019) Multilayer thin films of Zinc (II) Phthalocyanine loaded Poly(D, L-lactide-co-glycolide) nanocapsules by layer-by-layer self assembly. Materials Research Express, 6 (7). ISSN 2053-1591

Benli, Ahmet Deniz (2019) Nanocomposite fuel cells. [Thesis]

Bouremmad, Farida and Bouchair, Abdennour and Semsari Parapari, Sorour and Shawuti, Shalima and Gülgün, Mehmet Ali (2019) Characterization of the corallina elongata alga and study of its biosorption properties for methylene blue. Journal of the Chemical Society of Pakistan, 41 (1). pp. 62-71. ISSN 0253-5106

Boz, Emre Burak (2019) Metal-Organic framework/graphene oxide derived porous carbons for platinum based electrocatalysts for oxygen reduction reaction. [Thesis]

Bülbül, Gonca and Liu, Gökşin and Vithalapur, Namrata Rao and Atılgan, Canan and Sayers, Zehra and Pourmand, Nader (2019) Employment of iron-binding protein from Haemophilus influenzae in functional nanopipettes for iron monitoring. ACS Chemical Neuroscience (SI), 10 (4). pp. 1970-1977. ISSN 1948-7193 (Print) 1948-7193 (Online)

Cakal Sarac, Elcin and Haghighi Poudeh, Leila and Seyyed Monfared Zanjani, Jamal and Pehlivan, Zeki Semih and Cebeci, Fevzi Çakmak and Aydin, Ismail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2019) Nano-engineering of high-performance PA6.6 nanocomposites by the integration of CVD-grown carbon fiber on graphene as a bicomponent reinforcement by melt-compounding. Journal of Applied Polymer Science, 136 (47). ISSN 0021-8995 (Print) 1097-4628 (Online)

Cengiz, Elif Ceylan and Ansari Hamedani, Ali and Hayat Soytaş, Serap and Demir-Çakan, Rezan (2019) The adsorption effect of freestanding SiOx-decorated stabilized polyacrylonitrile interlayers in lithium-sulfur batteries. Dalton Transactions, 48 (13). pp. 4353-4361. ISSN 1477-9226 (Print) 1477-9234 (Online)

Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Seyyed Monfared Zanjani, Jamal and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2019) Performance comparison of CVD grown carbon nanofiber based on single- and multi-layer graphene oxides in melt-compounded PA6.6 nanocomposites. Open Journal of Composite Materials, 9 (2). pp. 99-123. ISSN 2164-5612 (Print) 2164-5655 (Online)

Daş, Elif and Yarar Kaplan, Begüm and Alkan Gürsel, Selmiye and Bayrakçeken Yurtcan, Ayşe (2019) Graphene nanoplatelets-carbon black hybrids as an efficient catalyst support for Pt nanoparticles for polymer electrolyte membrane fuel cells. Renewable Energy, 139 . pp. 1099-1110. ISSN 0960-1481 (Print) 1879-0682 (Online)

Dayı, Elif Nur and Al Nasiri, N. (2019) Diffusion study of rare-earth oxides into silica layer for environmental barrier coating applications. Journal of the European Ceramic Society, 39 (14). pp. 4216-4222. ISSN 0955-2219 (Print) 1873-619X (Online)

Eksioğlu, Aycan and Colakerol Arslan, Leyla and Sezen, Meltem and Ow-Yang, Cleva W. and Büyükaksoy, Aligül (2019) Formation of nanocomposite solid oxide fuel cell cathodes by preferential clustering of cations from a single polymeric precursor. ACS Applied Materials & Interfaces, 11 (51). pp. 47904-47916. ISSN 1944-8244 (Print) 1944-8252 (Online)

El Khaldi, Raed M. and Paşaoğlu, Mehmet E. and Güçlü, Serkan and Menceloğlu, Yusuf Z. and Özdoğan, Reyhan and Çelebi, Mithat and Kaya, Mehmet A. and Koyuncu, İsmail (2019) Fabrication of high-performance nanofiber-based FO membranes. Desalination and Water Treatment, 147 . pp. 56-72. ISSN 1944-3994 (Print) 1944-3986 (Online)

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory. Composite Structures, 223 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Massarwa, Eyass and Seyyed Monfared Zanjani, Jamal and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2019) Determining tab material for tensile test of CFRP laminates with combined usage of digital image correlation and acoustic emission techniques. Composites Part A: Applied Science and Manufacturing, 127 . ISSN 1359-835X (Print) 1878-5840 (Online)

Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) Acoustic emission monitoring of glass/carbon hybrid fiber/epoxy composites under flexural and tensile loading conditions. In: 5th International Conference on Mechanics of Composites (MECHCOMP), Lisbon, Portugal

Emami Tabrizi, Isa and Zanjani, J. Seyyed Monfared and Yıldız, Mehmet (2019) Investigation of damage accumulation in glass/carbon fiber hybrid composites through acoustic emission method. In: 22nd International Conference on Composites Materials (ICCM22), Melbourne, Australia

Fatehi, R. and Rahmat, Amin and Tofighi, N. and Yıldız, Mehmet and Shadloo, M. S. (2019) Density-based smoothed particle hydrodynamics methods for incompressible flows. Computers and Fluids, 185 . pp. 22-33. ISSN 0045-7930 (Print) 1879-0747 (Online)

Goharibajestani, Zahra and Yürüm, Alp and Yürüm, Yuda (2019) Effect of transition metal oxide nanoparticles on gas adsorption properties of graphene nanocomposites. Applied Surface Science, 475 . pp. 1070-1076. ISSN 0169-4332 (Print) 1873-5584 (Online)

Gül, Burçin and Kılıç, Deniz and Aslan, Dilan and Bayramiçli, Mehmet and Akbulut, Özge (2019) Silicone-based simulation models for peripheral nerve microsurgery. Journal of Plastic Reconstructive & Aesthetic Surgery, 72 (3). pp. 477-483. ISSN 1748-6815 (Print) 1878-0539 (Online)

Haghighi Poudeh, Leila and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Saner Okan, Burcu (2019) Facile synthesis of single- and multi-layer graphene/Mn3O4 integrated 3D urchin-shaped hybrid composite electrodes by core-shell electrospinning. ChemNanoMat, 5 (6). pp. 792-801. ISSN 2199-692X

Haghighi Poudeh, Leila and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2019) Three-dimensional graphene-based structures: production methods, properties, and applications. In: Celasco, Edvige and Chaika, Alexander N., (eds.) Handbook of Graphene: Growth, Synthesis, and Functionalization. Wiley-Scrivener, USA, pp. 359-387. ISBN 978-1-119-46855-4

Işık, Murat and Kısa, Erdal and Koç, Bahattin and Yıldız, Mehmet and Pehlivanoğulları, Barış and Orhangül, Akın and Poyraz, Özgür and Akbulut, Güray (2019) Topology optimization and finite elemental analysis for an inconel 718 engine mounting bracket manufactured via electron beam melting. In: Additive Manufacturing Conference (AMCTURKEY), Istanbul, Turkey

İnan Akmehmet, Güliz and Šturm, Sašo and Komelj, Matej and Samardžija, Zoran and Ambrožič, Bojan and Sezen, Meltem and Čeh, Miran and Ow-Yang, Cleva W. (2019) Origin of long afterglow in strontium aluminate phosphors: atomic scale imaging of rare earth dopant clustering. Ceramics International, 45 (16). pp. 20073-20077. ISSN 0272-8842 (Print) 1873-3956 (Online)

Janipour, Mohsen and Mısırlıoğlu, Burç and Şendur, Kürşat (2019) A theoretical treatment of THz resonances in semiconductor GaAs p–n junctions. Materials, 12 (15). ISSN 1996-1944 (Print) 1996-1944 (Online)

Jedari Golparvar, Ata and Yapıcı, Murat Kaya (2019) Graphene smart textile-based wearable eye movement sensor for electro-ocular control and interaction with objects. Journal of the Electrochemical Society, 166 (9). B3184-B3193. ISSN 0013-4651 (Print) 1945-7111 (Online)

Karimzadehkhouei, Mehrdad and Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Akgönül, Sarp and Özbey, Arzu and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2019) Experimental and numerical investigation of inlet temperature effect on convective heat transfer of gamma-Al2O3/water nanofluid flows in microtubes. Heat Transfer Engineering, 40 (9-10). pp. 738-752. ISSN 0145-7632 (Print) 1521-0537 (Online)

Kasap, Sibel and Kaya, İsmet İnönü and Repp, Sergej and Erdem, Emre (2019) Superbat: battery-like supercapacitor utilized by graphene foam and zinc oxide (ZnO) electrodes induced by structural defects. Nanoscale Advances, 1 (7). pp. 2586-2597. ISSN 2516-0230

Kaya, Cengiz and Avcıoğlu, Suna and Buldu, Merve and Kaya, Figen and Üstündağ, Cem B. and Kam, Erol and Menceloğlu, Yusuf Z. (2019) Processing of nano boron carbide reinforced flexible polymer composites with improved shielding properties. In: 6th Global Conference on Polymer and Composite Materials (PCM 2019), Bangkok, Thailand

Kaya, Cengiz and Avcıoğlu, Suna and Buldu, Merve and Kaya, Figen and Üstündağ, Cem Bülent and Kam, Erol and Menceloğlu, Yusuf Z. (2019) Processing and properties of new generation radiation shielding nano composites. In: Collaborative Conference on Materials Research (CCMR2019), Seoul, South Korea

Kaya, Cengiz and Avcıoğlu, Suna and Buldu, Merve and Menceloğlu, Yusuf Z. and Üstündağ, Cem B. and Kam, Erol and Kaptan, H. Yılmaz and Kaya, Figen (2019) Nano boron carbide (B4C) reinforced polymer matrix composites for shielding and engineering applications: issues and challenges. In: 5th International Conference on Traditional and Advanced Ceramics (ICTA2019), Muang Thong Thani, Bangkok, Thailand

Kaya, Cengiz and Buldu, Merve and Menceloğlu, Yusuf Z. and Kaya, Figen and Avcıoğlu, Suna (2019) Processing of surface modified nano boron carbide (B4C) containing flexible composites as shielding materials. In: 2nd International Conference on Material Strength and Applied Mechanics (MSAM 2019), Kiew, Ukraine

Kefal, Adnan and Haşim, Kazım Ahmet and Yıldız, Mehmet (2019) A novel isogeometric beam element based on mixed form of refined zigzag theory for thick sandwich and multilayered composite beams. Composites Part B: Engineering, 167 . pp. 100-121. ISSN 1359-8368 (Print) 1879-1069 (Online)

Kefal, Adnan and Sohouli, Abdolrasoul and Öterkuş, Erkan and Yıldız, Mehmet and Suleman, Afzal (2019) Topology optimization of cracked structures using peridynamics. Continuum Mechanics and Thermodynamics (SI), 31 (6). pp. 1645-1672. ISSN 0935-1175 (Print) 1432-0959 (Online)

Khan, Muhammad Yaqoob (2019) Performance analysis of solid oxide fuel cell-gas turbine hybrid system. [Thesis]

Koohestani, Babak and Khodadadi Darban, Ahmad and Mokhtari, Pozhhan and Yılmaz, Erol and Darezereshki, Esmaeel (2019) Comparison of different natural fiber treatments: a literature review. International Journal of Environmental Science and Technology, 16 (1). pp. 629-642. ISSN 1735-1472 (Print) 1735-2630 (Online)

Liu, Gökşin and Altun, Ezgi and Ünal, Süleyman Mert and Atılgan, Canan and Sayers, Zehra (2019) Characterization and iron binding dynamics of haemophilus influenzae ferric binding protein. In: 63rd Annual Meeting of the Biophysical-Society, Baltimore, MD

Mahdikhah, V. and Ataie, A. and Babaei, A. and Sheibani, S. and Ow-Yang, Cleva W. and Khabbazabkenar, Sirous (2019) Control of structural and magnetic characteristics of cobalt ferrite by post-calcination mechanical milling. Journal of Physics and Chemistry of Solids, 134 . pp. 286-294. ISSN 0022-3697 (Print) 1879-2553 (Online)

Mandal, Sefa Kemal and Zanjani, Jamal S. M. and Yıldız, Mehmet (2019) Damage detection in honeycomb sandwich panels by active thermography. In: 22nd International Conference on Composites Materials (ICCM22), Melbourne, Australia

Marques, Ricardo and Ünel, Mustafa and Yıldız, Mehmet and Suleman, Afzal (2019) Remaining useful life prediction of laminated composite materials using thermoelastic stress analysis. Composite Structures, 210 . pp. 381-390. ISSN 0263-8223 (Print) 1879-1085 (Online)

Moghaddam, Sevinch Rahimi and Derin, Bora and Yücel, Onuralp and Sönmez, M. Şeref and Sezen, Meltem and Bakan, Feray and Sanin, Vladimir N. and Andreev, Dimitriy E. (2019) Production of Mo2NiB2 based hard alloys by self-propagating high-temperature synthesis. High Temperature Materials and Processes, 38 . pp. 683-691. ISSN 0334-6455 (Print) 2191-0324 (Online)

Mokhtari, Pozhhan (2019) New low cost and green composite binder for construction. [Thesis]

Motezakker, Ahmad Reza and Khalili Sadaghiani, Abdolali and Çelik, Süleyman and Larsen, Tom and Villanueva, Luis Guillermo and Koşar, Ali (2019) Optimum ratio of hydrophobic to hydrophilic areas of biphilic surfaces in thermal fluid systems involving boiling. International Journal of Heat and Mass Transfer, 135 . pp. 164-174. ISSN 0017-9310 (Print) 1879-2189 (Online)

Mousavi, Mirsajjad (2019) Continous-flow photocatalytic reactor for the precisely controlled deposition of metallic nanoparticles. [Thesis]

Noberi, Cansu and Kaya, Cengiz (2019) Synthesis and characterization of hydrothermally synthesized ɑ-Fe2O3 nanostructures with controlled morphology. SN Applied Sciences, 1 (8). ISSN 2523-3971

Oğuz, Oğuzhan and Candau, Nicolas and Bernhard, Stéphane H.F. and Kosak Soz, Cagla and Heinz, Özge and Stochlet, Grégory and Plummer, Christopher J.G. and Yilgor, Emel and Yilgor, Iskender and Menceloğlu, Yusuf Z. (2019) Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocomposites. Journal of Polymer Science, Part A: Polymer Chemistry, 57 (24). pp. 2543-2556. ISSN 0887-624X (Print) 1099-0518 (Online)

Oğuz, Oğuzhan and Candau, Nicolas and Çıtak, Mehmet Kerem and Çetin, Fatma Nalan and Seven, Merve Senem and Menceloğlu, Yusuf Z. (2019) A sustainable approach to produce stiff, super-tough, and heat-resistant poly(lactic acid)-based green materials. ACS Sustainable Chemistry and Engineering, 7 (8). pp. 7869-7877. ISSN 2168-0485

Ramezanzadeh, Shayan and Özbulut, M. and Yıldız, Mehmet (2019) Simulation of irregular wave motion using a flap-type wavemaker. In: VIII. International Conference on Computational Methods in Marine Engineering (MARINE 2019), Gothenburg, Sweden

Sadeghi, Sadra and Khabbazabkenar, Sirous and Ow-Yang, Cleva W. and Nizamoğlu, Sedat (2019) Efficient white LEDs using liquid-state magic-sized CdSe quantum dots. Scientific Reports, 9 (1). ISSN 2045-2322

Saffarimiandoab, Farzin and Yavuztürk Gül, Bahar and Erkoç İlter, Selda and Güçlü, Serkan and Ünal, Serkan and Tunaboylu, Bahadır and Menceloğlu, Yusuf Z. and Koyuncu, İsmail (2019) Evaluation of biofouling behavior of zwitterionic silane coated reverse osmosis membranes fouled by marine bacteria. Progress in Organic Coatings, 134 . pp. 303-311. ISSN 0300-9440

Sayın, Sezin (2019) Fabrication and characterization of polymeric nanofibers and nanotubes for controlled release of rose bengal. [Thesis]

Sayın, Sezin and Özdemir, Ece and Acar, Egemen and Özaydın İnce, Gözde (2019) Multifunctional one-dimensional polymeric nanostructures for drug delivery and biosensor applications. Nanotechnology, 30 (41). ISSN 0957-4484 (Print) 1361-6528 (Online)

Sayın, Sezin and Tufani, Ali and Emanet, Melis and Genchi, Giada Graziana and Sen, Özlem and Shemshad, Sepideh and Özdemir, Ece and Ciofani, Gianni and Özaydın İnce, Gözde (2019) Electrospun nanofibers with ph-responsive coatings for control of release kinetics. Frontiers in Bioengineering and Biotechnology, 7 . ISSN 2296-4185

Seven, Merve Senem and Oğuz, Oğuzhan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2019) Tuning interaction parameters of thermoplastic polyurethanes in a binary solvent to achieve precise control over microphase separation. Journal of Chemical Information and Modeling (SI), 59 (5). pp. 1946-1956. ISSN 1549-9596 (Print) 1549-960X (Online)

Seyyed Monfared Zanjani, Jamal and Oğuz, Oğuzhan and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2019) Polymer composites containing functionalized nanoparticles and the environment. In: Pielichowski, Krzysztof and Majka, Tomasz, (eds.) Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications. Elsevier, Amsterdam, pp. 437-466. ISBN 9780128140642 (Print) 9780128140659 (Online)

Shafighfard, Torkan and Demir, Eralp and Yıldız, Mehmet (2019) Design of fiber-reinforced variable-stiffness composites for different open-hole geometries with fiber continuity and curvature constraints. Composite Structures, 226 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Sheibani Aghdam, Araz and Ghorbani, Morteza and Deprem, Gökberk and Cebeci, Fevzi Çakmak and Koşar, Ali (2019) A new method for intense cavitation bubble generation on layer-by-layer assembled slips. Scientific Reports, 9 (1). ISSN 2045-2322

Sohouli, Abdolrasoul and Kefal, Adnan and Yıldız, Mehmet and Suleman, Afzal (2019) Multi-material topology optimization of structures using peridynamics. In: 30th International Conference on Adaptive Structures and Technologies (ICAST2019), Montreal, Canada

Şen, Canhan and Aldulaimi, Wael and Mohammad Moradi, Omid and Mısırlıoğlu, Burç (2019) Loss of spin polarization in ferromagnet/ferroelectric tunnel junctions due to screening effects. Journal of Physics D: Applied Physics, 52 (1). ISSN 0022-3727 (Print) 1361-6463 (Online)

Talebian Gevari, Moein and Ghorbani, Morteza and Svagan, Anna J. and Grishenkov, Dmitry and Koşar, Ali (2019) Energy harvesting with micro scale hydrodynamic cavitation-thermoelectric generation coupling. AIP Advances, 9 (10). ISSN 2158-3226

Tamer, Yusuf Talha and Gazsek, Ilona K. and Abdizadeh, Haleh and Batur, Tuğçe and Reynolds, Kimberly and Atılgan, Ali Rana and Atılgan, Canan and Toprak, Erdal (2019) High-order epistasis in catalytic power of dihydrofolate reductase gives rise to a rugged fitness landscape in the presence of trimethoprim selection. Molecular Biology and Evolution, 36 (7). pp. 1533-1550. ISSN 0737-4038 (Print) 1537-1719 (Online)

Tansan, Murat (2019) Tailoring interfacial interactions in fiber reinforced polymeric composites by the electrospray deposition of waterborne carbon nanotubes. [Thesis]

Tofighi, Nima and Özbulut, Murat and Suleman, A. and Feng, J. J. and Yıldız, Mehmet (2019) Dielectrophoretic interaction of circular particles in a uniform electric field. European Journal of Mechanics - B/Fluids, 78 . pp. 194-202. ISSN 0997-7546 (Print) 1873-7390 (Online)

Toydemir Yasasun, Burcu and Önel, Aykut Can and Aykaç, İlknur Gündüz and Gülgün, Mehmet Ali and Çolakerol Arslan, Leyla (2019) Effect of Ge layer thickness on the formation of Mn5Ge3 thin film on Ge/Si (1 1 1). Journal of Magnetism and Magnetic Materials, 473 . pp. 348-354. ISSN 0304-8853 (Print) 1873-4766 (Online)

Tufani, Ali and Özaydın İnce, Gözde (2019) Protein gating by vapor deposited Janus membranes. Journal of Membrane Science, 575 . pp. 126-134. ISSN 0376-7388 (Print) 1873-3123 (Online)

Yılmaz, Melike Sevim and Yarar Kaplan, Begüm and Alkan Gürsel, Selmiye and Metin, Önder (2019) Binary CuPt alloy nanoparticles assembled on reduced graphene oxide-carbon black hybrid as efficient and cost-effective electrocatalyst for PEMFC. International Journal of Hydrogen Energy, 44 (27). pp. 14184-14192. ISSN 0360-3199 (Print) 1879-3487 (Online)

Yiğitalp, Ayça (2019) Nafion modified NCA cathode synthesis for superior cycling performance of lithium-ION batteries. [Thesis]

Yurduşen, Aysu and Yürüm, Yuda (2019) A controlled synthesis strategy to enhance the CO2 adsorption capacity of MIL-88B type MOF crystallites by the crucial role of narrow micropores. Industrial & Engineering Chemistry Research, 58 (31). pp. 14058-14072. ISSN 0888-5885

Zırhlı, Onur (2019) Development of a novel method to obtain complex shaped magnetic structures for additive manufacturing. [Thesis]