Items where Author is "Papila, Melih"
Article
Önder, Melike Nur and Gülgün, Mehmet Ali and Papila, Melih (2024) Piezoresistivity analyses of GNP-filled composite piezoresistor under cycling loading and correlation with the Monte Carlo percolation model. Composites Science and Technology, 254 . ISSN 0266-3538
Asghari Arpatappeh, Farzin and Manga, Emel and Bilge, Kaan and Aydemir, Berk Emre and Gülgün, Mehmet Ali and Papila, Melih (2022) Morphology evolution of self-same nanocomposites hybridized with jumbo-sized particles. Journal of Applied Polymer Science, 139 (48). ISSN 0021-8995 (Print) 1097-4628 (Online)
Papila, Melih and Atılgan, Ali Rana (2022) All-composite honeycomb core sandwich structures: master curves for stiffness-based design. Forces in Mechanics, 6 . ISSN 2666-3597
Karakaya, Nursel and Papila, Melih and Özkoç, Güralp (2020) Effects of hot melt adhesives on the interfacial properties of overmolded hybrid structures of polyamide-6 on continuous carbon fiber/epoxy composites. Composites Part A: Applied Science and Manufacturing, 139 . ISSN 1359-835X
Karakaya, Nursel and Papila, Melih and Özkoç, Güralp (2020) Overmolded hybrid composites of polyamide-6 on continuous carbon and glass fiber/epoxy composites: 'an assessment of the interface'. Composites Part A: Applied Science and Manufacturing, 131 . ISSN 1359-835X (Print) 1878-5840 (Online)
Mohamadi, Mahboube and Papila, Melih and Garmabi, Hamid and Goharibajestani, Zahra (2019) Morphological evaluation and phase behavior of PVDF/PEO blends in the presence of graphene nanoplatelets through rheological measurements. Journal of Applied Polymer Science, 136 (40). ISSN 0021-8995 (Print) 1097-4628 (Online)
Mehraeen, Shayan and Sadeghi, Sahl and Cebeci, Fevzi Çakmak and Papila, Melih and Alkan Gürsel, Selmiye (2018) Polyvinylidene fluoride grafted poly(styrene sulfonic acid) as ionic polymer-metal composite actuator. Sensors and Actuators A: Physical, 279 . pp. 157-167. ISSN 0924-4247
Papila, Melih (2018) Design of and with thin-ply non-crimp fabric as building blocks for composites. Science and Engineering of Composite Materials, 25 (3). pp. 501-516. ISSN 0792-1233 (Print) 2191-0359 (Online)
Baysal, Mustafa and Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih and Yürüm, Yuda (2018) Preparation of high surface area activated carbon from waste-biomass of sunflower piths: Kinetics and equilibrium studies on the dye removal. Journal of Environmental Chemical Engineering, 6 (2). pp. 1702-1713. ISSN 2213-3437 (Print) 2213-2929 (Online)
Baysal, Mustafa and Bilge, Kaan and Yıldızhan, Melike Mercan and Yorulmaz, Yelda and Öncel, Çınar and Papila, Melih and Yürüm, Yuda (2018) Catalytic synthesis of boron nitride nanotubes at low temperatures. Nanoscale, 10 (10). pp. 4658-4662. ISSN 2040-3364 (Print) 2040-3372 (Online)
Bilge, Kaan and Yorulmaz, Yelda and Javanshour, Farzin and Ürkmez, Ayça and Yılmaz, Bengisu and Şimşek, Eren and Papila, Melih (2017) Synergistic role of in-situ crosslinkable electrospun nanofiber/epoxy nanocomposite interlayers for superior laminated composites. Composites Science and Technology, 151 . pp. 310-316. ISSN 0266-3538 (Print) 1879-1050 (Online)
Mehraeen, Shayan and Alkan Gürsel, Selmiye and Papila, Melih and Cebeci, Fevzi Çakmak (2017) Investigation of electrochemical actuation by polyaniline nanofibers. Smart Materials and Structures, 26 (9). ISSN 0964-1726 (Print) 1361-665X (Online)
Mohamadi, Mahboube and Garmabi, Hamid and Papila, Melih (2017) Conjugated dual-phase transitions in crystalline/crystalline blend of poly(vinylidene fluoride)/poly(ethylene oxide). Polymer Bulletin, 74 (6). pp. 2117-2135. ISSN 0170-0839 (Print) 1436-2449 (Online)
Özden-Yenigün, Elif and Bilge, Kaan and Sünbüloğlu, Emin and Bozdağ, Ergün and Papila, Melih (2017) High strain rate response of nanofiber interlayered structural composites. Composite Structures, 168 . pp. 47-55. ISSN 0263-8223 (Print) 1879-1085 (Online)
Bilge, Kaan and Ürkmez, Ayça and Şimşek, Eren and Papila, Melih (2016) Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self-same nanocomposites. Journal of Applied Polymer Science, 133 (43). ISSN 0021-8995 (Print) 1097-4628 (Online)
Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih (2016) Sound-tracking of failure events in cross-ply composite laminates under tension. Composite Structures, 153 . pp. 421-427. ISSN 0263-8223 (Print) 1879-1085 (Online)
Ghobadi, Sajjad and Mehraeen, Shayan and Bakhtiari, Rokhsareh and Shamloo, Bahar and Sadhu, Veera Bhadraiah and Papila, Melih and Cebeci, Fevzi Çakmak and Alkan Gürsel, Selmiye (2016) PVA/PANI/rGO ternary electrospun mats as metal-free anti-bacterial substrates. RSC Advances, 6 (95). pp. 92434-92442. ISSN 2046-2069 (Print) 2046-2069 (Online)
Mohamadi, Mahboube and Garmabi, Hamid and Papila, Melih (2016) Effect of miscibility state on crystallization behavior and polymorphism in crystalline/crystalline blends of poly(vinylidene fluoride)/poly(ethylene oxide). Macromolecular Research, 24 (8). pp. 698-709. ISSN 1598-5032 (Print) 2092-7673 (Online)
Ghobadi, Sajjad and Sadighikia, Sina and Papila, Melih and Cebeci, Fevzi Çakmak and Alkan Gürsel, Selmiye (2015) Graphene-reinforced poly(vinyl alcohol) electrospun fibers as building blocks for high performance nanocomposites. RSC Advances, 5 (103). pp. 85009-85018. ISSN 2046-2069 (Print) 2046-2069 (Online)
Bilge, Kaan and Venkataraman, S. and Menceloğlu, Yusuf Z. and Papila, Melih (2014) Global and local nanofibrous interlayer toughened composites for higher in-plane strength. Composites Part A: Applied Science and Manufacturing, 58 . pp. 73-76. ISSN 1359-835X
Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2012) Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers. Composites Science and Technology, 72 (14). pp. 1639-1645. ISSN 0266-3538
Özden Yenigün, Elif and Menceloğlu, Yusuf Z. and Papila, Melih (2012) MWCNTs/P(St-co-GMA) composite nanofibers of engineered interface chemistry for epoxy matrix nanocomposites. ACS Applied Materials & Interfaces, 4 (2). pp. 777-784. ISSN 1944-8244 (Print) 1944-8252 (Online)
Çilingir, Halime Didem and Papila, Melih (2010) "Equivalent" electromechanical coefficient for IPMC actuator design based on equivalent bimorph beam theory. Experimental Mechanics, 50 (8). pp. 1157-1168. ISSN 0014-4851
Alkoy, Ebru Mensur and Papila, Melih (2010) Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics. Ceramics International, 36 (6). pp. 1921-1927. ISSN 0272-8842
Özden, Elif and Menceloğlu, Yusuf Z. and Papila, Melih (2010) Engineering chemistry of electrospun nanofibers and interfaces in nanocomposites for superior mechanical properties. ACS Applied Materials & Interfaces, 2 (7). pp. 1788-1793. ISSN 1944-8244 (Print) 1944-8252 (Online)
Dağdeviren, Canan and Papila, Melih (2010) Dielectric behavior characterization of a fibrous-ZnO/PVDF nanocomposite. Polymer Composites, 31 (6). pp. 1003-1010. ISSN 0272-8397
Mensur Alkoy, Ebru and Dağdeviren, Canan and Papila, Melih (2009) Processing conditions and aging effect on the morphology of PZT electrospun nanofibers, and dielectric properties of the resulting 3–3 PZT/Polymer composite. Journal of the American Ceramic Society, 92 (11). pp. 2566-2570. ISSN 0002-7820
Papila, Melih and Sheplak, Mark and Cattafesta, Louis N. (2008) Optimization of clamped circular piezoelectric composite actuators. Sensors and Actuators A: Physical, 147 (1). pp. 310-323. ISSN 0924-4247
Yördem, Sinan Onur and Papila, Melih and Menceloğlu, Yusuf Z. (2008) Effects of electrospinning parameters on polyacrylonitrile nanofiber diameter: an investigation by response surface methodology. Materials & design, 29 (1). pp. 34-44. ISSN 0261-3069
Papila, Melih and Haftka, Raphael T. and Nishida, Toshikazu and Sheplak, Mark (2006) Piezoresistive microphone design Pareto optimization: Tradeoff between sensitivity and noise floor. Journal of microelectromechanical systems, 15 (6). pp. 1632-1643. ISSN 1057-7157
Goel, Tushar and Haftka, Raphael T. and Papila, Melih and Shyy, Wei (2006) Generalized pointwise bias error bounds for response surface approximations. International journal for numerical methods in engineering, 65 (12). pp. 2035-2059. ISSN 0029-5981
Papila, Melih and Haftka, Raphael T. and Watson, Layne T. (2005) Pointwise bias error bounds for response surface approximations and min-max bias design. AIAA Journal, 43 (8). pp. 1797-1807. ISSN 0001-1452
Papers in Conference Proceedings
Önder, Melike Nur and Gülgün, Mehmet Ali and Papila, Melih (2023) Graphite enhanced GNP/PVA composite piezoresistor with a stable loading response. In: 38th Technical Conference of the American Society for Composites, ASC 2023, Boston, MA, USA
Asghari Arpatappeh, Farzin and Aydemir, Berk Emre and Bilge, Kaan and Papila, Melih (2019) Multiscale reinforcing interlayers of self-same P(St-co-GMA) nanofibers loaded with MCF for polymer composites and nanocomposites. In: AIAA Scitech Forum, 2019, San Diego, United States
Bilge, Kaan and Başer, Gülnur and Papila, Melih (2012) Effect of TEX on the strength and failure envelopes of non-crimp glass fiber composites. In: 15th European Conference on Composite Materials (ECCM15), Venice, Italy
Başer, Gülnur and Bilge, Kaan and Uyanik, Nursli and Papila, Melih (2012) Investigation of the strength and failure envelopes of non-crimp glass fiber reinforced thermoplastic composites based on in-situ polymerized cyclic oligomers. In: 15th European Conference on Composite Materials (ECCM15), Venice, Italy
Özden Yenigün, Elif and Atılgan, Canan and Menceloğlu, Yusuf Z. and Papila, Melih (2012) Tracing the superior thermo-mechanical properties in nanocomposites of crosslinked fillers at the interface: molecular point of view. In: 15th European Conference on Composite Materials (ECCM15), Venice, Italy
Özden Yenigün, Elif and Atılgan, Ali Rana and Bilge, Kaan and Menceloğlu, Yusuf Z. and Atılgan, Canan and Papila, Melih (2011) Designed-in molecular interactions lead to superior thermo-mechanical properties in nanocomposites. In: 2010 MRS Fall Meeting, Boston, Massachusetts
Bilge, Kaan and Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Papila, Melih (2011) Strength of hybrid composites reinforced with surface modified polymer/MWCNTs nano-composite interlayers. In: 18th International Conference on Composite Materials (ICCM18), Jeju Island, Korea
Özden, Elif and Menceloğlu, Yusuf Z. and Papila, Melih (2010) Electrospun polymer/MWCNTs nanofiber reinforced composites. In: MRS Fall Meeting 2009, Boston, MA
Mensur Alkoy, Ebru and Papila, Melih (2009) Electrical properties of CuO doped-KNN ceramics and 1-3 piezocomposites. In: 2009 IEEE Ultrasonics Symposium, Roma, Italy
Menşur Alkoy, Ebru and Dağdeviren, Canan and Papila, Melih (2009) Pb(Zr,Ti)O3 nanofibers produced by electrospinning process. In: 2008 MRS Fall Meeting (Symposium V on Materials, Devices, and Characterization for Smart Systems), Boston, USA
Çilingir, Halime Didem and Menceloğlu, Yusuf Z. and Papila, Melih (2008) The effect of IPMC parameters in electromechanical coefficient based on equivalent beam theory. In: Smart Structures/Nondestructive Evaluation for Health Monitoring + Diagnostics, San Diego, California, USA
Dağdeviren, Canan and Papila, Melih (2008) Dielectric properties of ZnO/PVDF flexible composites. In: SAMPE | Fall Technical Conference 2008 Multifunctional Materials: Working Smarter Together, Memphis Tennessee, US
Dağdeviren, Canan and Gülleroğlu, Mert and Gülgün, Mehmet Ali and Papila, Melih (2008) ZnO nanofiber production via electrospinning. In: 4. Ulusal Nanobilim ve Nanoteknoloji Konferansı (NanoTr4), İstanbul, Türkiye
Öğüt, Erdem and Yördem, Sinan Onur and Menceloğlu, Yusuf Z. and Papila, Melih (2007) Poly (vinylidene fluoride)/zinc oxide smart composite material. In: SPIE: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, California USA
Yördem, Sinan Onur and Papila, Melih and Menceloğlu, Yusuf Z. and Öğüt, Erdem and Gülleroğlu, Mert (2006) Piezoelectric polymer and ceramic ultrafine fibers for piezocomposite films. In: American Society for Composites, 21st Technical Conference, Dearborn
Li, Yawei and Nishida, Toshikazu and Cattafesta, Lou and Sheplak, Mark and Papila, Melih (2006) Modeling and optimization of a side-implanted piezoresistive shear. In: SPIE, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, SanDiego
Şimşek, Eren and Yördem, Sinan Onur and Menceloğlu, Yusuf Z. and Papila, Melih (2006) Optimization of superhydrophobic surfaces generated by electrospinning. In: AMERICAN CHEMICAL SOCIETY,
Yördem, Sinan Onur and Gülleroğlu, Mert and Öğüt, Erdem and Menceloğlu, Yusuf Z. and Papila, Melih (2006) Piezoelectric Polymer and Ceramic Ultrafine Fibers for Piezocomposite Films. In: 21st Technical Conference- American Soceity for Composites, Dearborn MI USA (Accepted)
Papila, Melih and Haftka, Raphael T. and Mason, William H. and Alves, Rafael (2004) Tailoring wing structures for reduced drag penalty in off-design flight conditions. In: 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY
Book Section / Chapter
Kızıltaş, Güllü and Papila, Melih and Yılmaz, Bengisu and Bilge, Kaan (2019) Challenges in micro-CT characterization of composites. In: Orhan, Kaan, (ed.) Micro-Computed Tomography (Micro-CT) in Medicine and Engineering. Springer, Cham, Switzerland, pp. 225-246. ISBN 978-3-030-16640-3 (Print) 978-3-030-16641-0 (Online)
Arca, Miray A. and Papila, Melih and Çöker, Demirkan (2016) Experimental investigation of strength of curved beam by thin ply non-crimp fabric laminates. In: Zehnder, Alan T. and Carroll, Jay and Hazeli, Kavan and Berke, Ryan B. and Pataky, Garrett and Cavalli, Matthew and Beese, Alison M. and Xia, Shuman, (eds.) Fracture, Fatigue, Failure and Damage Evolution: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics Series, 8. Springer, Switzerland, pp. 37-42. ISBN 978-3-319-42194-0 (Print) 978-3-319-42195-7 (Online)
Bilge, Kaan and Papila, Melih (2014) Interlayer toughening mechanisms of composite materials. In: Qin, Qinghua and Ye, Jianqiao, (eds.) Toughening Mechanisms in Composite Materials. Elsevier - Woodhead Publishing, Amsterdam, Netherlands. ISBN 9781782422792 (Accepted)
Monograph
Papila, Melih (2020) Double-double laminated skin/grid architecture in structural composite design. Project Report. Tübitak.