Items where Author is "Özlü, Emre"

Article

Barzegar, Zahra and Özlü, Emre (2021) Analytical prediction of cutting tool temperature distribution in orthogonal cutting including third deformation zone. Journal of Manufacturing Processes, 67 . pp. 325-344. ISSN 1526-6125 (Print) 2212-4616 (Online)

Yüksel, Esra and Budak, Erhan and Özlü, Emre and Oral, Ahmet and İğrek, Fatih and Tosun, Fulya (2021) Prediction of thermal growth in a high-speed spindle by considering thermo-mechanical behavior. MM Science Journal, 2021 . pp. 4526-4533. ISSN 1803-1269 (Print) 1805-0476 (Online)

Özlü, Emre and Ebrahimi Araghizad, Arash and Budak, Erhan (2020) Broaching tool design through force modelling and process simulation. CIRP Annals - Manufacturing Technology, 69 (1). pp. 53-56. ISSN 0007-8506 (Print) 1726-0604 (Online)

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2019) Effects of turn-milling conditions on chip formation and surface finish. CIRP Annals - Manufacturing Technology, 68 (1). pp. 113-116. ISSN 0007-8506 (Print) 1726-0604 (Online)

Cakir, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2018) Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face. International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 81-89. ISSN 0268-3768 (Print) 1433-3015 (Online)

Budak, Erhan and Özlü, Emre and Bakioğlu, Hayri and Barzegar Osgouei, Zahra (2016) Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces. CIRP Annals - Manufacturing Technology, 65 (1). pp. 121-124. ISSN 0007-8506 (Print) 1726-0604 (Online)

Özlü, Emre and Molinari, Alain and Budak, Erhan (2010) Two-zone analytical contact model applied to orthogonal cutting. Machining Science and Technology, 14 (3). pp. 323-343. ISSN 1091-0344 (print) 1532-2483 (online)

Özlü, Emre and Budak, Erhan and Molinari, A. (2009) Analytical and experimental investigation of rake contact and friction behavior in metal cutting. International Journal of Machine Tools and Manufacture, 49 (11). pp. 865-875. ISSN 0890-6955

Budak, Erhan and Özlü, Emre (2008) Development of a thermomechanical cutting process model for machining process simulations. CIRP Annals - Manufacturing Technology, 57 (1). pp. 97-100. ISSN 0007-8506

Özlü, Emre and Budak, Erhan (2007) Analytical modeling of chatter stability in turning and boring operations - part I: model development. Journal of Manufacturing Science and Engineering, 129 (4). pp. 726-732. ISSN 1087-1357

Özlü, Emre and Budak, Erhan (2007) Analytical modeling of chatter stability in turning and boring operations - Part II: Experimental verification. Journal of manufacturing science and engineering, 129 (4). pp. 733-739. ISSN 1087-1357

Papers in Conference Proceedings

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan (2021) Dalgalı talaş yüzeyli takımların kararlılık analizi ve takım optimizasyonu [Stability analysis of crest-cut end mills and the optimization of tool geometry]. In: 11th International Congress on Machining (UTIS), Virtual

Yıldız, Saltuk and Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yavaş, Çağlar and Kurt, Seçil and Budak, Erhan (2021) Evaluation of carbide end mills with different cutting geometries in machining of a titanium alloy. In: 11th International Congress on Machining (UTIS), Virtual

Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan (2021) Gantry optimization of a 5-axis cnc machine tool considering dynamic modes. In: 11th International Congress on Machining (UTIS), Virtual

Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan (2020) Design and analysis of a 5-axis gantry CNC machine tool. In: 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), Thessaloniki, Greece

Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan (2018) An experimental study on surface errors in orthogonal turn-milling process. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Çoskun, Sıla and Baytok, Esma and Özlü, Emre and Sert Alağaç, Melike and Akın, Cenk (2018) Experimental analysis of orange peel problem in turning of titanium alloys. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Barzegar Osgouei, Zahra and Özlü, Emre and Altan, Erhan and Budak, Erhan (2018) Heat modeling for third deformation zone. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2017) Development of turn-milling machine tool program parameters based on basic cutting geometry. In: 8th International Symposium on Machining, Antalya, Turkey

Barzegar Osgouei, Zahra and Budak, Erhan and Özlü, Emre (2017) Modeling of tool temperature in orthogonal cutting. In: 8th International Symposium on Machining, Antalya, Turkey

Bakioğlu, Hayri and Özlü, Emre and Budak, Erhan (2015) Dik kesme modelinde üçüncü deformasyon bölgesi kuvvetlerinin termomekanik modellenmesi. In: 6. Ulusal Talaşlı İmalat Sempozyumu, Istanbul

Yalçın, Turgut Köksal and Erberdi, Muharrem and Özlü, Emre and Budak, Erhan (2015) Yüksek hızlı iş millerinin termal modellemesi. In: 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul

Bilgen, Samet and Özlü, Emre and Erberdi, Muharrem S. and Budak, Erhan (2015) An experimental study of CNC machine tool feed drive limits and cycle time prediction for a 3-axis milling operation. In: 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Aydın, Kuşadası, Türkiye

Albayrak, Mehmet and Yalçın, Turgut Köksal and Erberdi, Muharrem and Özlü, Emre and Budak, Erhan (2015) Static and dynamic analysis of different machine tool spindles. In: 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Aydın, Kuşadası, Türkiye

Çelebi, Ceren and Özlü, Emre and Budak, Erhan (2015) Experimental and analytical investigation of third deformation zone in orthogonal cutting. In: 4th International Conference on Virtual Machining Process Technology, Vancouver, Canada

Bakioğlu, Hayri and Özlü, Emre and Budak, Erhan (2015) Thermo-mechanical modeling of cutting forces in micro endmilling operations. In: 4th International Conference on Virtual Machining Process Technology, Vancouver, Canada

Baytok, Esma and Özlü, Emre and Budak, Erhan (2014) Titanyum ve alaşımlarının yüksek performanslı işlenmesi (High performance machining of titanium and its alloys). In: 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye

Çakır, Esin and Karagüzel, Umut and Olgun, Utku and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2013) Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Baytok, Esma and Tuna, Başak and Toprak, Ayhan and Özlü, Emre and Budak, Erhan (2013) Freze ve delik delme işlemlerinde kullanılan karbür takımların sistematik olarak performans karşılaştırması (Performance comparison of milling and drilling carbide tools). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Çomak, Alptunç and Koca, Recep and Özlü, Emre and Özşahin, Orkun and Öztürk, Erdem and Tunç, Taner and Uysal, Emre and Budak, Erhan and Özgüven, H. Nevzat (2013) Talaşlı imalat süreçlerinin kararlılığı ve takım tezgah dinamiği (Machining process stability and machine tool dynamics). In: 16. Ulusal Makina Teorisi Sempozyumu (UMTS 2013), Erzurum, Turkey

Özlü, Emre and Tunç, Lütfi Taner and Güven, İpek and Budak, Erhan (2012) Industrial applications of science integrated machining approach. In: 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Pamukkale, Denizli, Turkey

Çakır, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2012) Modeling of temperature distribution in orthogonal cutting with dual-zone contact at rake face. In: 1st International Conference on Virtual Machining Process Technology (VMPT), Montreal, Canada

Akçay, Recep and Memiş, Emre K. and Özlü, Emre and Budak, Erhan (2010) Havacılık sanayinde süreç optimizasyonu için kararlılık diyagramlarının kullanımı. In: 2. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2010), Konya, Türkiye

Akçay, Recep and Memiş, Emre K. and Özlü, Emre and Budak, Erhan (2010) Increasing productivity in high speed milling of airframe components using chatter stability diagrams. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

Özlü, Emre and Engin, Şerafettin and Cook, Cristina and El-Wardany, Tahany and Budak, Erhan (2010) Simulation of broaching operations for tool design optimization. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

Özlü, Emre and Budak, Erhan (2009) Process modeling of orthogonal cutting with hone radiused tools. In: 12th CIRP Conference on Modeling and Machining Operations, San Sebastion, Spain

Aksu, Burak and Özlü, Emre and Budak, Erhan (2008) Analysis and modeling of edge forces in orthogonal cutting. In: International Conference on Manufacturing Engineering, Kassandra, Greece

Öztürk, Erdem and Özlü, Emre and Budak, Erhan (2007) Modeling dynamics and stability of 5-axis milling processes. In: 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy

Özlü, Emre and Budak, Erhan and Molinari, Alain (2007) Thermomechanical modeling of orthogonal cutting including the effect of stick-slide regions on the rake face. In: 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy

Özlü, Emre and Budak, Erhan (2007) Experimental analysis and modeling of orthogonal cutting using material and friction models. In: 4th International Conference and Exhibition on Machines and Design and Production of Dies and Molds, Cesme, Izmir, Turkey

Özlü, Emre and Budak, Erhan (2006) Analytical stability models for turning and boring operations. In: 2nd International Conference on High Speed Cutting, Vancouver, Canada

Özlü, Emre and Budak, Erhan (2006) Analytical prediction of stability limit in turning operations. In: CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia

Özlü, Emre and Budak, Erhan (2006) Tornalama işlemlerinde süreç kararlılığının analitik olarak modellenmesi. In: TİMAK Kongresi, Istanbul, Turkey

Working Paper / Technical Report

Ulusoy, Gündüz and Kılıç, Kemal and Özlü, Emre and Altekin, Fatma Tevhide and Çatay, Bülent and Budak, Erhan and Pasin, Merih and Karaata, Enver Selçuk and Varandi, Siamak (2017) Sanayide Dijitalleşme Stratejileri Çalıştayı - Taslak rapor. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Thesis

Özlü, Emre (2008) Analytical modeling of cutting process mechanics and dynamics for simulation of industrial machining operations. [Thesis]