Items where Author is "Şaş Çaycı, Hatice Sinem"

Group by: Item Type | No Grouping
Number of items: 28.

Article

Barzegar Osgouei, Ali and Karimi, Sasan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2024) Enhancing interlaminar bonding quality estimation in laser-assisted fiber placement of CF/PEKK composites: a correction factor approach for improved prediction of intimate contact. Composites Part A: Applied Science and Manufacturing, 181 . ISSN 1359-835X (Print) 1878-5840 (Online)

Zafar, Salman and Saleem, Qandeel and Şaş Çaycı, Hatice Sinem and Bayazıt, Mustafa Kemal (2024) Numerical investigation of heat transfer and temperature distribution in a microwave-heated heli-flow reactor and experimental validation. Chemical Engineering Journal, 488 . ISSN 1385-8947 (Print) 1873-3212 (Online)

Aliyeva, Nargiz and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) Revolutionizing transportation composite structures: lightweight, sustainable, and multi-scale hybrid design through waste tire-driven graphene, hemp fiber, and bio-based overmoulding. Journal of Thermoplastic Composite Materials . ISSN 0892-7057 (Print) 1530-7980 (Online) Published Online First https://dx.doi.org/10.1177/08927057231222821

Seyednourani, Mahsa and Akgün, Sercan and Ulus, Hasan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2023) Experimental investigation on compression-after-impact (CAI) response of aerospace grade thermoset composites under low-temperature conditions assisted with acoustic emission monitoring. Composite Structures, 321 . ISSN 0263-8223

Dericiler, Kuray and Zafar, Salman and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) The effect of reinforcement aspect ratio on the performance of PA66 composites with recycled carbon fiber and upcycled graphene nanoplatelets: an interface characterization from process to modeling. Journal of Applied Polymer Science, 140 (35). ISSN 0021-8995 (Print) 1097-4628 (Online)

Şükür, Emine Feyza and Elmas, Sinem Gül and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) An experimental implication of long-term hot-wet-aged carbon fiber/polyether ketone ketone composites: the impact of automated fiber placement process parameters and process-induced defects. Journal of Applied Polymer Science, 140 (29). ISSN 0021-8995 (Print) 1097-4628 (Online)

Dericiler, Kuray and Hezarkhani, Marjan and Emami Tabrizi, Isa and Doğan, Semih and Berktaş, İlayda and Erdem, Emre and Advani, Suresh G. and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) Effect of interleaved electrolyte forms on macro-scaled structural hybrid supercapacitors with asymmetric configurations of graphene-coated carbon fabric electrodes. Applied Composite Materials . ISSN 0929-189X (Print) 1573-4897 (Online) Published Online First https://dx.doi.org/10.1007/s10443-023-10130-y

Karimi, Sasan and Yousefi Louyeh, Pouya and Barzegar Osgouei, Ali and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2023) A study of post-processing for AFP-fabricated thermoplastic composites with void content and air permeability characterization. Journal of Reinforced Plastics and Composites . ISSN 0731-6844 (Print) 1530-7964 (Online) Published Online First https://dx.doi.org/10.1177/07316844231166078

Sharani, Baidaa and Haghighi Poudeh, Leila and Elmas, Sinem and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) Aspects of halloysite nanotubes integration in epoxy nanocomposites: curing kinetics and deformation mechanism. Polymer Composites, 44 (1). pp. 574-591. ISSN 0272-8397 (Print) 1548-0569 (Online)

Barzegar Osgouei, Ali and Karimi, Sasan and Sukur, Emine Feyza and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2022) Effect of fiber orientation on temperature history during laser-assisted thermoplastic fiber placement. Journal of Reinforced Plastics and Composites . ISSN 0731-6844 (Print) 1530-7964 (Online) Published Online First https://dx.doi.org/10.1177/07316844221143448

Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) Effects of meso- and micro-scale defects on hygrothermal aging behavior of glass fiber reinforced composites. Polymer Composites, 43 (11). pp. 8396-8408. ISSN 0272-8397 (Print) 1548-0569 (Online)

Elmas, Sinem and Şaş Çaycı, Hatice Sinem (2022) Thermally exfoliated graphene oxide (TEGO) reinforced fast-cure epoxy resin: cure behavior and flexural properties. Erciyes Üniversitesi Fen Bilimleri Enstitüsü Fen Bilimleri Dergisi, 38 (2). pp. 168-179. ISSN 1012-2354

Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) A rational study on the hydrothermal aging of AFP manufactured CF/polyetherketoneketone composites with in situ consolidation supported by acoustic emission inspection. Journal of Applied Polymer Science, 139 (29). ISSN 0021-8995 (Print) 1097-4628 (Online)

Yıldırım, Ferhat and Kabakçı, Elif and Şaş Çaycı, Hatice Sinem and Eskizeybek, Volkan (2022) Multi-walled carbon nanotube grafted 3D spacer multi-scale composites for electromagnetic interference shielding. Polymer Composites, 43 (8). pp. 5690-5703. ISSN 0272-8397 (Print) 1548-0569 (Online)

Demir, Eralp and Şaş Çaycı, Hatice Sinem and Işık, Murat and Gungor, Eda Aydogan and Davut, Kemal (2022) A numerical methodology for monitoring stress distributions and experimental proof of the concept on metal embedded thin polymer-matrix composites using x-ray diffraction. Thin-Walled Structures, 173 . ISSN 0263-8231 (Print) 1879-3223 (Online)

Arıkan, Muhammed Hasan and Eroğlu, Fatih and Eskizeybek, Volkan and Şükür, Emine Feyza and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) A systematic characterization approach for vacuum bag only prepregs towards an accurate process design. Materials, 15 (2). ISSN 1996-1944

Seyednourani, Mahsa and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2021) A two-stage optimization methodology for gate and vent locations and distribution media layout for liquid composite molding process. Composites Part A: Applied Science and Manufacturing, 149 . ISSN 1359-835X (Print) 1878-5840 (Online)

Aliyeva, Nargiz and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2021) Recent developments on the overmolding process for the fabrication of thermoset and thermoplastic composites by the integration of nano/micron-scale reinforcements. Composites Part A: Applied Science and Manufacturing, 149 . ISSN 1359-835X (Print) 1878-5840 (Online)

Dericiler, Kuray and Sadeghi, Hadi Mohammadjafari and Yağcı, Yavuz Emre and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2021) Experimental and numerical investigation of flow and alignment behavior of waste tire-derived graphene nanoplatelets in PA66 matrix during melt-mixing and injection. Polymers, 13 (6). ISSN 2073-4360 (Online)

Ciftci, Cihan and Şaş Çaycı, Hatice Sinem (2019) A rational utilization of reinforcement material for flexural design of 3D-printed composite beams. Journal of Reinforced Plastics and Composites, 38 (23-24). pp. 1040-1054. ISSN 0731-6844 (Print) 1530-7964 (Online)

Şaş Çaycı, Hatice Sinem and Simacek, Pavel and Advani, Suresh G. (2019) A methodology to characterize fiber preform permeability by using Kardar-Parisi-Zhang equation. Journal of Porous Media, 22 (7). pp. 799-811. ISSN 1091-028X (Print) 1934-0508 (Online)

Çelik, Murat and Çiftçi, Cihan and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem (2019) Numerical characterization of permeability tensor of fiber preforms for liquid composite molding applications. Advanced Science, Engineering and Medicine, 11 (7). pp. 633-636. ISSN 2164-6627 (Print) 2164-6635 (Online)

Papers in Conference Proceedings

Şaş Çaycı, Hatice Sinem and Özbilen, M. and Eskizeybek, V. (2023) Evaluating interfacial performance of carbon-epoxy composites by fiber bundle tests: the impact of nanofiller dimension and surface chemistry. In: 23rd International Conference on Composite Materials, ICCM 2023, Belfast

Barzegar Osgouei, Ali and Karimi, Sasan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2022) Investigating the effect of ply orientation on the surface thermal history of newly placed tape during thermoplastic composite manufacturing with lafp process. In: 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Lausanne

Karimi, Sasan and Barzegar Osgouei, Ali and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) Parametric study of afp lay-up process parameters effect on the air permeability of thermoplastic composites and their suitability for out of autoclave post-processing by a new method. In: 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Lausanne

Yildirim, Afsin T. and Eroglu, Fatih and Yesilyurt, Ogulcan and Albayrak, Kubilay and Şaş Çaycı, Hatice Sinem and Ciftci, Cihan (2018) Effect of ambient temperature on the flexural behavior of 3D printed composite beams. In: SAMPE Long Beach 2018 Conference and Exhibition, Long Beach, CA, USA

Eroglu, Fatih and Yildirim, Afsin T. and Yesilyurt, Ogulcan and Şaş Çaycı, Hatice Sinem and Ciftci, Cihan (2018) Investigation of compressive performance of 3D printed carbon fiber reinforced plastics. In: SAMPE Long Beach 2018 Conference and Exhibition, Long Beach, CA, usa

Book Section / Chapter

Dericiler, Kuray and Aliyeva, Nargiz and Mohammadjafari Sadeghi, Hadi and Şaş Çaycı, Hatice Sinem and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2022) Graphene in automotive parts. In: Song, Huaihe and Nguyen, Tuan Anh and Yasin, Ghulam and Singh, Nakshatra Bahadur and Gupta, Ram K., (eds.) Nanotechnology in the Automotive Industry. Micro and Nano Technologies. Elsevier, UK, pp. 623-651. ISBN 978-0-323-90524-4

This list was generated on Tue Jul 23 06:27:39 2024 +03.