Inertial focusing of microparticles in curvilinear microchannels with different curvature angles

Official URL: http://dx.doi.org/10.1007/s10404-018-2082-0

Inertial microfluidics has become one of the emerging topics due to potential applications such as particle separation, particle enrichment, rapid detection and diagnosis of circulating tumor cells. To realize its integration to such applications, underlying physics should be well understood. This study focuses on particle dynamics in curvilinear channels with different curvature angles (280A degrees, 230A degrees, and 180A degrees) and different channel heights (90, 75, and 60 A mu m) where the advantages of hydrodynamic forces were exploited. We presented the cruciality of the three-dimensional particle position with respect to inertial lift forces and Dean drag force by examining the focusing behavior of 20 A mu m (large), 15 A mu m (medium) and 10 A mu m (small) fluorescent polystyrene microparticles for a wide range of flow rates (400-2700 A mu L/min) and corresponding channel Reynolds numbers. Migration of the particles in lateral direction and their equilibrium positions were investigated in detail. In addition, in the light of our findings, we described two different regions: transition region, where the inner wall becomes the outer wall and vice versa, and the outlet region. The maximum distance between the tight particle stream of 20 and 15 A mu m particles was obtained in the 90 high channel with curvature angle of 280A degrees at Reynolds number of 144 in the transition region (intersection of the turns), which was the optimum condition/configuration for focusing.