Kaya, Alihan and Özdemir, Mehmed Rafet and Keskinöz, Mehmet and Koşar, Ali (2014) The effects of inlet restriction and tube size on boiling instabilities and detection of resulting premature critical heat flux in microtubes using data analysis. Applied Thermal Engineering, 65 (1-2). pp. 575-587. ISSN 1359-4311
This is the latest version of this item.
Official URL: http://dx.doi.org/10.1016/j.applthermaleng.2014.01.062
Abstract
In order to achieve high heat removal rates for micro scale cooling, it may be necessary to exploit boiling heat transfer. The size of corresponding heat sinks is continuously decreasing from mini size to micro size, and one of the most practical and extensive cooling methods is boiling heat transfer in plain microchannels and microtubes, which might be limited by inherent boiling instabilities. This study provides useful information about boiling instability phenomena in microtubes and offers a parametric comparative investigation. Experimental data are obtained from microtubes having 254∼μm and 685∼ μm inner diameters, which were tested at low mass fluxes (78.9 - 276.3 kg/m2 s) to reveal potential boiling instability mechanisms. De-ionized water was used as working fluid, while microtubes were heated by Joule heating. Configurations prone to boiling instabilities (low system pressures, low mass fluxes) were imposed to observe boiling instabilities in microtubes. Fine restriction valves were introduced to the system for providing flow restriction at the inlet. Alongside the experiments without any inlet restriction, experiments were conducted with configurations having inlet restrictions, where pressure drops over inlet restriction elements were 4 and 8 times as much as pressure drop over the microtube to suppress boiling instabilities. Temperature and pressure drop fluctuation signals were recorded and processed before premature CHF (Critical Heat Flux) conditions and at impending premature CHF conditions. Furthermore, Fast Fourier Transform (FFT) of the recorded data is performed for revealing the frequency correlations of the obtained fluctuations for observing the change in the FFT behavior. A significant rise in energy of the side lobes, which are basically the high frequency spectral regions, was observed from FFT profiles for impending premature CHF conditions implying that FFT could be used as a detection tool for premature CHF.
Item Type: | Article |
---|---|
Uncontrolled Keywords: | Boiling heat transfer; Boiling instabilities; Microtubes; Inlet restriction effect; Critical heat flux; Signal processing; Fast Fourier Transform |
Subjects: | T Technology > T Technology (General) T Technology > TJ Mechanical engineering and machinery T Technology > TK Electrical engineering. Electronics Nuclear engineering |
Divisions: | Faculty of Engineering and Natural Sciences > Academic programs > Mechatronics Faculty of Engineering and Natural Sciences > Academic programs > Electronics Faculty of Engineering and Natural Sciences |
Depositing User: | Ali Koşar |
Date Deposited: | 22 Feb 2014 20:49 |
Last Modified: | 02 Aug 2019 09:53 |
URI: | https://research.sabanciuniv.edu/id/eprint/23953 |
Available Versions of this Item
-
The effects of inlet restriction and tube size on boiling instabilities and detection of resulting premature critical heat flux in microtubes. (deposited 31 Oct 2012 22:57)
- The effects of inlet restriction and tube size on boiling instabilities and detection of resulting premature critical heat flux in microtubes using data analysis. (deposited 22 Feb 2014 20:49) [Currently Displayed]