Items where Subject is "TS0200 Metal manufactures. Metalworking"

Article

Altıntaş, Y. and Kersting, P. and Biermann, D. and Budak, Erhan and Denkena, B. and Lazoğlu, I. (2014) Virtual process systems for part machining operations. CIRP Annals - Manufacturing Technology, 63 (2). pp. 585-605. ISSN 0007-8506 (Print) 1726-0604 (Online)

Budak, Erhan and Özlü, Emre (2008) Development of a thermomechanical cutting process model for machining process simulations. CIRP Annals - Manufacturing Technology, 57 (1). pp. 97-100. ISSN 0007-8506

Koç, Bahattin and Thangaswamy, Sridhar (2011) Design and analysis of a reconfigurable discrete pin tooling system for molding of three-dimensional free-form objects. Robotics and Computer-Integrated Manufacturing (Sp. Iss. SI), 27 (2). pp. 335-348. ISSN 0736-5845

Poyraz, Özgür and Yasa, Evren and Tunç, Lütfi Taner and Kilicay, Koray (2021) Parametric simulations for residual stresses and distortions of Inconel 625 fabricated by laser powder bed fusion additive manufacturing. Journal of Additive Manufacturing Technologies, 1 (2). ISSN 2749-3229

Tunç, Lütfi Taner (2019) Effect of MQL conditions on milling of AISI 316L type stainless steeels [AISI 316L tipi paslanmaz çeliklerin frezelemesinde MQL şartlarının takım ömrüne etkisi]. Journal of the Faculty of Engineering and Architecture of Gazi University, 34 (4). pp. 1665-1677. ISSN 1300-1884 (Print) 1304-4915 (Online)

Tunç, Lütfi Taner (2018) Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1891-1909. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner (2016) Rapid extraction of machined surface data through inverse geometrical solution of tool path information. International Journal of Advanced Manufacturing Technology, 87 (1-4). pp. 353-362. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner (2019) Smart tool path generation for 5-axis ball-end milling of sculptured surfaces using process models. Robotics and Computer Integrated Manufacturing, 56 . pp. 212-221. ISSN 0736-5845 (Print) 1879-2537 (Online)

Tunç, Lütfi Taner and Zatarain, Mikel (2019) Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts. CIRP Annals - Manufacturing Technology, 68 (1). pp. 401-404. ISSN 0007-8506 (Print) 1726-0604 (Online)

Papers in Conference Proceedings

Barzegar Osgouei, Zahra and Özlü, Emre and Altan, Erhan and Budak, Erhan (2018) Heat modeling for third deformation zone. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Çoskun, Sıla and Baytok, Esma and Özlü, Emre and Sert Alağaç, Melike and Akın, Cenk (2018) Experimental analysis of orange peel problem in turning of titanium alloys. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Gönül, Bora and Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2019) Improved stable conditions in robotic milling by kinematic redundancy. In: 17th CIRP Conference on Modelling of Machining Operations, Sheffield, UK

Gönül, Bora and Tunç, Lütfi Taner (2019) Model based analysis of kinematic redundancy for increased chatter stability in robotic milling. In: 10th International Congress on Machining, Antalya, Turkey

Kienast, Pascal and Tunç, Lütfi Taner and Koca, Recep and Olgu, Ozan and Ganser, Philip and Bergs, Thomas (2023) Improving dynamic process stability in finishing of thin-walled workpieces by optimal selection of stock shape. In: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy

Özcan, Yiğit and Tunç, Lütfi Taner (2019) Experimental investigation on tool path patterns in controlled depth abrasive water jet machining. In: 15th International Conference on High Speed Machining (HSM 2019), Prague, Czech Republic

Özcan, Yiğit and Tunç, Lütfi Taner (2018) Investigation of surface mophology and integrity in multi axis abrasive waterjet machining (AWJM). In: International Symposium on Machining, Antalya, Turkey

Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan (2018) An experimental study on surface errors in orthogonal turn-milling process. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Tool axis optimization for robotic 5-axis milling considering kinematics. In: 14th Conference on High Speed Machining Conference, San Sebastian (Accepted)

Tunç, Lütfi Taner and Sapmaz, Ömer Faruk (2017) Challenges for industrial robots towards milling applications. In: 8th International Symposium on Machining (UTIS 2017), Antalya, Turkey

Tunç, Lütfi Taner and Seçer, Ragıp Orkun (2019) Investigation of process damping in robotic milling. In: 15th International Conference on High Speed Machining (HSM 2019), Prague, Czech Republic

Book Section / Chapter

Demir, Muhittin H. and Adıvar, Burcu and Haksöz, Çağrı (2011) Managing procurement risks in Turkish machinery industry: the case of Renkler Makina. In: Haksöz, Çağrı and Seshadri, Sridhar and Iyer, Ananth V., (eds.) Managing Supply Chains on the Silk Road: Strategy, Performance, and Risk. Taylor & Francis, New York, NY. ISBN 9781439867204