Items where Subject is "T175 Industrial research. Research and development"

Article

Altıntaş, Y. and Kersting, P. and Biermann, D. and Budak, Erhan and Denkena, B. and Lazoğlu, I. (2014) Virtual process systems for part machining operations. CIRP Annals - Manufacturing Technology, 63 (2). pp. 585-605. ISSN 0007-8506 (Print) 1726-0604 (Online)

Feroci, Marco and Stella, L. and Van der Klis, M. and Courvoisier, T. J.-L. and Hernanz, M. and Hudec, R. and Santangelo, A. and Walton, D. and Zdziarski, A. and Barret, D. and Belloni, T. and Braga, J. and Brandt, S. and Budtz-Jrgensen, C. and Campana, S. and Den Herder, J.-W. and Huovelin, J. and Israel, G. L. and Pohl, M. and Ray, P. and Vacchi, A. and Zane, S. and Argan, A. and Attina, P. and Bertuccio, G. and Bozzo, E. and Campana, R. and Chakrabarty, D. and Costa, E. and De Rosa, A. and Del Monte, E. and Di Cosimo, S. and Donnarumma, I. and Evangelista, Y. and Haas, D. and Jonker, P. and Korpela, S. and Labanti, C. and Malcovati, P. and Mignani, R. and Muleri, F. and Rapisarda, M. and Rashevsky, A. and Rea, N. and Rubini, A. and Tenzer, C. and Wilson-Hodge, C. and Winter, B. and Wood, K. and Zampa, G. and Zampa, N. and Abramowicz, M. A. and Alpar, M. Ali and Altamirano, D. and Alvarez, J. M. and Amati, L. and Amoros, C. and Antonelli, L. A. and Artigue, R. and Azzarello, P. and Bachetti, M. and Baldazzi, G. and Barbera, M. and Barbieri, C. and Basa, S. and Baykal, A. and Belmont, R. and Boirin, L. and Bonvicini, V. and Burderi, L. and Bursa, M. and Cabanac, C. and Cackett, E. and Caliandro, G. A. and Casella, P. and Chaty, S. and Chenevez, J. and Coe, M. J. and Collura, A. and Corongiu, A. and Covino, S. and Cusumano, G. and D'Amico, F. and Dall'Osso, S. and De Martino, D. and De Paris, G. and Di Persio, G. and Di Salvo, T. and Done, C. and Dovciak, M. and Drago, A. and Ertan, Ünal and Fabiani, S. and Falanga, M. and Fender, R. and Ferrando, P. and Della Monica Ferreira, D. and Fraser, G. and Frontera, F. and Fuschino, F. and Galvez, J. L. and Gandhi, P. and Giommi, P. and Godet, O. and Göğüş, Ersin and Goldwurm, A. and Götz, D. and Grassi, M. and Guttridge, P. and Hakala, P. and Henri, G. and Hermsen, W. and Horak, J. and Hornstrup, A. and In 't Zand, J. J. M. and Isern, J. and Kalemci, Emrah and Kanbach, G. and Karas, V. and Kataria, D. and Kennedy, T. and Klochkov, D. and Kluzniak, W. and Kokkotas, K. and Kreykenbohm, I. and Krolik, J. and Kuiper, L. and Kuvvetli, I. and Kylafis, N. and Lattimer, J. M. and Lazzarotto, F. and Leahy, D. and Lebrun, F. and Lin, D. and Lund, N. and Maccarone, T. and Malzac, J. and Marisaldi, M. and Martindale, A. and Mastropietro, M. and McClintock, J. and McHardy, I. and Mendez, M. and Mereghetti, S. and Miller, M. C. and Mineo, T. and Morelli, E. and Morsink, S. and Motch, C. and Motta, S. and Munoz Darias, T. and Naletto, G. and Neustroev, V. and Nevalainen, J. and Olive, J. F. and Orio, M. and Orlandini, M. and Orleanski, P. and Ozel, F. and Pacciani, L. and Paltani, S. and Papadakis, I. and Papitto, A. and Patruno, A. and Pellizzoni, A. and Petracek, V. and Petri, J. and Petrucci, P. O. and Phlips, B. and Picolli, L. and Possenti, A. and Psaltis, D. and Rambaud, D. and Reig, P. and Remillard, R. and Rodriguez, J. and Romano, P. and Romanova, M. and Schanz, T. and Schmid, C. and Segreto, A. and Shearer, A. and Smith, A. and Smith, P. J. and Soffitta, P. and Stergioulas, N. and Stolarski, M. and Stuchlik, Z. and Tiengo, A. and Torres, D. and Török, G. and Turolla, R. and Uttley, P. and Vaughan, S. and Vercellone, S. and Waters, R. and Watts, A. and Wawrzaszek, R. and Webb, N. and Wilms, J. and Zampieri, L. and Zezas, A. and Ziolkowski, J. (2011) The large observatory for x-ray timing (LOFT). Experimental Astronomy (Sl), 34 (2). pp. 415-444. ISSN 1572-9508

Roch, Tomas and Simurka, Lukas and Ow-Yang, Cleva W. and Sezen, Meltem and Satrapinskyy, Leonid and Türütoğlu, Tuncay (2020) Periodic density fluctuations in sputtered aluminum-doped silicon oxynitride layers. International Journal of Applied Glass Science, 11 (1). pp. 207-214. ISSN 2041-1286 (Print) 2041-1294 (Online)

Tunç, Lütfi Taner (2019) Effect of MQL conditions on milling of AISI 316L type stainless steeels [AISI 316L tipi paslanmaz çeliklerin frezelemesinde MQL şartlarının takım ömrüne etkisi]. Journal of the Faculty of Engineering and Architecture of Gazi University, 34 (4). pp. 1665-1677. ISSN 1300-1884 (Print) 1304-4915 (Online)

Tunç, Lütfi Taner and Zatarain, Mikel (2019) Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts. CIRP Annals - Manufacturing Technology, 68 (1). pp. 401-404. ISSN 0007-8506 (Print) 1726-0604 (Online)

Yılmaz, Çağatay and Akalın, Çağdaş and Günal, İbrahim and Çelik, Hakan and Büyük, Murat and Suleman, Afzal and Yıldız, Mehmet (2018) A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading. Composite Structures, 186 . pp. 347-354. ISSN 0263-8223 (Print) 1879-1085 (Online)

Papers in Conference Proceedings

Ertek, Gürdal and Akçay, Alp Eren (2010) Kimya sanayinde su tasarrufu için karar destek sistemi. In: İ.T.Ü. 12. Endüstriyel Kirlenme Kontrolü Sempozyumu, Istanbul, Turkey

Tombuş, Önder and Ertek, Gürdal and Atay, Ceren and Kökten, Gizem and Tombuş, Ayşe Cilacı (2010) A new network flow model for determining the assortment of roll types in packaging industry. In: 2010 IEEE International Conference on Systems, Man, and Cybernetics (SMC2010), Istanbul, Turkey

Tunç, Lütfi Taner and Sapmaz, Ömer Faruk (2017) Challenges for industrial robots towards milling applications. In: 8th International Symposium on Machining (UTIS 2017), Antalya, Turkey

Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter (2018) Identification of the CIRP expertise network based on public data. In: 51st CIRP Conference on Manufacturing Systems, Stockholm, Sweden

Book Section / Chapter

Ulusoy, Gündüz and Altuğ Fayda, Sema Nur and İyigün Meydanlı, İffet (2012) Ar-ge projeleri için proje sonrası analiz ve risk yönetimi süreçleri. In: Öner, Atilla M., (ed.) Teknik Değişimin Ekonomisi ve Yönetimi. Pan Yayıncılık, İstanbul, pp. 413-435. ISBN 9786054518241