Items where Division is "Manufacturing Systems Eng." and Year is 2022

Abdollahzadeh, Mohammadamin and Kefal, Adnan and Yıldız, Mehmet (2022) Shape sensing of a doubly curved aft fuselage panel using inverse finite element method. In: 9th International Workshop on Metrology for AeroSpace (MetroAeroSpace), Pisa, Italy

Asghari Arpatappeh, Farzin and Manga, Emel and Bilge, Kaan and Aydemir, Berk Emre and Gülgün, Mehmet Ali and Papila, Melih (2022) Morphology evolution of self-same nanocomposites hybridized with jumbo-sized particles. Journal of Applied Polymer Science, 139 (48). ISSN 0021-8995 (Print) 1097-4628 (Online)

Bartolo, Paulo and Malshe, Ajay and Ferraris, Eleonora and Koç, Bahattin (2022) 3D bioprinting: materials, processes, and applications. CIRP Annals, 71 (2). pp. 577-597. ISSN 0007-8506 (Print) 1726-0604 (Online)

Barzegar Osgouei, Ali and Karimi, Sasan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2022) Investigating the effect of ply orientation on the surface thermal history of newly placed tape during thermoplastic composite manufacturing with lafp process. In: 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Lausanne

Bilgiç, Burcu (2022) Monitoring and improvement of machining process of carbon fiber reinforced polymer materials. [Thesis]

Fallah, Ali and Altunbek, Mine and Bartolo, Paulo and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin (2022) 3D printed scaffold design for bone defects with improved mechanical and biological properties. Journal of the Mechanical Behavior of Biomedical Materials, 134 . ISSN 1751-6161 (Print) 1878-0180 (Online)

Girişken, Çağla and Avaz, Merve Senem and Ersoy, Osman Gökhan and Menceloğlu, Yusuf Z. (2022) Development and performance evaluation of cool black surface on thermoplastic polyolefins via incorporation of non-near infrared absorptive pigments. Journal of Applied Polymer Science, 139 (44). ISSN 0021-8995 (Print) 1097-4628 (Online)

Hatipoğlu, Ersen and Bakkal, Mustafa and Budak, Erhan (2022) On the finite element modeling best practices for the metal cutting simulations. In: 19th International Conference on Machine Design and Production (UMTIK), Cappadocia, Turkey

Karimi, Sasan and Barzegar Osgouei, Ali and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) Parametric study of afp lay-up process parameters effect on the air permeability of thermoplastic composites and their suitability for out of autoclave post-processing by a new method. In: 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Lausanne

Kendibilir, Abdullah and Kefal, Adnan and Sohouli, A. and Yıldız, Mehmet and Koç, Bahattin and Suleman, A. (2022) Peridynamics topology optimization of three-dimensional structures with surface cracks for additive manufacturing. Computer Methods in Applied Mechanics and Engineering, 401 (Part B). ISSN 0045-7825 (Print) 1879-2138 (Online)

Kurnaz, Sinem (2022) Identification of feasible operating limits based on experimental analysis in robotic milling. [Thesis]

Küplülü, Mert (2022) omputational modeling of reacting flow inside the polyamide 66 polymerization line. [Thesis]

Manga, Emel (2022) Damage tolerance of toughened epoxy at low temperatures. [Thesis]

Ormancı-Acar, Türkan and Korkut, Sevde and Keskin, Basak and Ağtaş, Meltem and Taş, Cüneyt Erdinç and Mutlu-Salmanlı, Öykü and Türken, Türker and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2022) Combining S-DADPS monomer and halloysite nanotube for fabrication superior nanofiltration membrane. Polymer, 255 . ISSN 0032-3861 (Print) 1873-2291 (Online)

Saghatchi, Roozbeh (2022) Numerical simulation of complex soft matter systems. [Thesis]

Saghatchi, Roozbeh (2022) Numerical simulation of complex soft matter systems. [Thesis]

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yıldız, Saltuk and Budak, Erhan (2022) Chatter stability of thin-walled part machining using special end mills. CIRP Annals, 71 (1). pp. 365-368. ISSN 0007-8506 (Print) 1726-0604 (Online)

Yıldırım, Ferhat and Kabakçı, Elif and Şaş Çaycı, Hatice Sinem and Eskizeybek, Volkan (2022) Multi-walled carbon nanotube grafted 3D spacer multi-scale composites for electromagnetic interference shielding. Polymer Composites, 43 (8). pp. 5690-5703. ISSN 0272-8397 (Print) 1548-0569 (Online)

Yıldız, Saltuk (2022) Modeling milling of thin-walled parts considering dynamic structure-process interactions. [Thesis]

Yoğurtçuoğlu, Abdul Vahap (2022) Effect of surface roughness on tensile properties of additively manufactured thin-walled structures. [Thesis]

Zhao, Feifei and Kefal, Adnan and Bao, Hong (2022) Nonlinear deformation monitoring of elastic beams based on isogeometric iFEM approach. International Journal of Non-Linear Mechanics, 147 . ISSN 0020-7462 (Print) 1878-5638 (Online)