Items where Division is "Materials Science & Eng." and Year is 2016

Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z | Ç | Ö | Ü | İ | Ş
Number of items: 79.

A

Abdizadeh, Haleh and Acar, Ömer and Güçlü, Tandaç Fürkan and Tamer, Yusuf Talha and Altınuşak, Tuğçe and Toprak, Erdal and Atılgan, Ali Rana and Atılgan, Canan (2016) Computational assessment of trimethoprim resistance in dihydrofolate reductase. In: 60th Annual Meeting of the Biophysical Society, Los Angeles, CA

Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan (2016) Computational modeling of iron binding and release in human serum transferrin. In: 41st FEBS Congress on Molecular and Systems Biology for a Better Life, Kusadasi, Turkey

Abdizadeh, Haleh and Atılgan, Canan (2016) Predicting long term cooperativity and specific modulators of receptor interactions in human transferrin from dynamics within a single microstate. Physical Chemistry Chemical Physics, 18 (11). pp. 7916-7926. ISSN 1463-9076 (Print) 1463-9084 (Online)

Abulizi, Anaguli (2016) Titanate nanotubes combined with graphene-based materials as a novel anode material for lithium-ion batteries. [Thesis]

Akay, Erdem and Yılmaz, Çağatay and Kocaman, Esat Selim and Türkmen, Halit S. and Yıldız, Mehmet (2016) Monitoring Poisson's ratio degradation of FRP composites under fatigue loading using biaxially embedded FBG sensors. Materials, 9 (9). ISSN 1996-1944 (Print) 1996-1944 (Online)

Akhlaghi Baghoojari, Omid and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) Rheological behavior of poly(acrylonitrile) concentrated solutions: effect of Sb2O3 nanoparticles on shear and extensional flow. Colloid and Polymer Science, 294 (9). pp. 1463-1473. ISSN 0303-402X (Print) 1435-1536 (Online)

Arca, Miray A. and Papila, Melih and Çöker, Demirkan (2016) Experimental investigation of strength of curved beam by thin ply non-crimp fabric laminates. In: Zehnder, Alan T. and Carroll, Jay and Hazeli, Kavan and Berke, Ryan B. and Pataky, Garrett and Cavalli, Matthew and Beese, Alison M. and Xia, Shuman, (eds.) Fracture, Fatigue, Failure and Damage Evolution: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics Series, 8. Springer, Switzerland, pp. 37-42. ISBN 978-3-319-42194-0 (Print) 978-3-319-42195-7 (Online)

Armağan, Efe (2016) Fabrication of stimuli responsive and conducting polymeric nanotubes by chemical vapor deposition: loading/release and sensor studies. [Thesis]

Avcı, Gökay and Akhlaghi Baghoojari, Omid and Üstbaş, Burçin and Özbay, Ceren and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) A PCE-based rheology modifier allows machining of solid cast green bodies of alumina. Ceramics International, 42 (3). pp. 3757-3761. ISSN 0272-8842 (Print) 1873-3956 (Online)

B

Bakan, Feray and Sezen, Meltem (2016) Polimer yüzeylerinin fonksiyonelleştirilmesi için odaklanmış iyon demeti ile nanoyapılandırma uygulamaları. (Accepted)

Bakırcı, Ezgi (2016) Development of cell sheet based bioink for 3D bioprinting applications. [Thesis]

Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and İnce, Gözde and Koç, Bahattin (2016) Cell sheet as a bioink for 3D bioprinting. In: Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden

Baysal, Mustafa and Yürüm, Alp and Yıldız, Burçin and Yürüm, Yuda (2016) Structure of some western Anatolia coals investigated by FTIR, Raman, C-13 solid state NMR spectroscopy and X-ray diffraction. International Journal of Coal Geology, 163 . pp. 166-176. ISSN 0166-5162 (Print) 1872-7840 (Online)

Baysal, Mustafa and Yürüm, Yuda (2016) Characterization of bio-oils and bio-char obtained from the pyrolysis of a mixture of Lolium perenne, Festuca ovina, Festuca rubra and Poa pratensis grasses. Biofuels, 7 (2). pp. 181-189. ISSN 1759-7269 (Print) 1759-7277 (Online)

Bilge, Kaan and Ürkmez, Ayça and Şimşek, Eren and Papila, Melih (2016) Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self-same nanocomposites. Journal of Applied Polymer Science, 133 (43). ISSN 0021-8995 (Print) 1097-4628 (Online)

Bilge, Kaan and Yılmaz, Bengisu and Papila, Melih (2016) Sound-tracking of failure events in cross-ply composite laminates under tension. Composite Structures, 153 . pp. 421-427. ISSN 0263-8223 (Print) 1879-1085 (Online)

C

Carlier, Aurelli and Akdeniz Skvortsov, Gözde and Hafezi, Forough and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin and Oosterwyck, Hans Van (2016) Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering. Biofabrication, 8 (2). ISSN 1758-5082 (Print) 1758-5090 (Online)

Ceh, Miran and Jeric, Marja and Sturm, Saso and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali (2016) TEM and STEM investigations of Sr(Ti,Nb)O3-δ thermoelectric with the addition of CaO and SrO. In: 16th European Microscopy Congress 2016 (EMC 2016), Lyon, France

Chouhan, Raghuraj Singh and Pandey, Ashish and Qureshi, Anjum and Özgüz, Volkan Hüsnü and Kolkar Mohammed, Javed Hussain Niazi (2016) Nanomaterial resistant microorganism mediated reduction of graphene oxide. Colloids and Surfaces B: Biointerfaces, 146 . pp. 39-46. ISSN 0927-7765 (Print) 1873-4367 (Online)

Chouhan, Raghuraj Singh and Qureshi, Anjum and Yağcı, Barış and Gülgün, Mehmet Ali and Özgüz, Volkan Hüsnü and Kolkar Mohammed, Javed Hussain Niazi (2016) Biotransformation of multi-walled carbon nanotubes mediated by nanomaterial resistant soil bacteria. Chemical Engineering Journal, 298 . pp. 1-9. ISSN 1385-8947 (Print) 1873-3212 (Online)

D

Daş, Elif and Alkan Gürsel, Selmiye and Işıkel Şanlı, Lale and Bayrakçeken Yurtcan, Ayşe (2016) Comparison of two different catalyst preparation methods for graphene nanoplatelets supported platinum catalysts. International Journal of Hydrogen Energy, 41 (23). pp. 9755-9761. ISSN 0360-3199 (Print) 1879-3487 (Online)

Dündar Tekkaya, Ezgi and Yürüm, Yuda (2016) Mesoporous MCM-41 material for hydrogen storage: a short review. International Journal of Hydrogen Energy (SI), 41 (23). pp. 9789-9795. ISSN 0360-3199 (Print) 1879-3487 (Online)

Dündar Tekkaya, Ezgi and Yürüm, Yuda (2016) Synthesis of palladium incorporated MCM-41 via microwave irradiation and investigation of its hydrogen storage properties. International Journal of Hydrogen Energy (SI), 41 (23). pp. 9828-9833. ISSN 0360-3199 (Print) 1879-3487 (Online)

G

Ghobadi, Sajjad and Mehraeen, Shayan and Bakhtiari, Rokhsareh and Shamloo, Bahar and Sadhu, Veera Bhadraiah and Papila, Melih and Cebeci, Fevzi Çakmak and Alkan Gürsel, Selmiye (2016) PVA/PANI/rGO ternary electrospun mats as metal-free anti-bacterial substrates. RSC Advances, 6 (95). pp. 92434-92442. ISSN 2046-2069 (Print) 2046-2069 (Online)

Ghorbani, Morteza and Yıldız, Mehmet and Gözüaçık, Devrim and Koşar, Ali (2016) Cavitating nozzle flows in micro- and minichannels under the effect of turbulence. Journal of Mechanical Science and Technology, 30 (6). pp. 2565-2581. ISSN 1738-494X (Print) 1976-3824 (Online)

Goharibajestani, Zahra and Yürüm, Alp and Yürüm, Yuda (2016) Decoration of graphene sheets with Pd/Al2O3 hybrid particles for hydrogen storage applications. International Journal of Hydrogen Energy (SI), 41 (23). pp. 9810-9818. ISSN 0360-3199 (Print) 1879-3487 (Online)

Goharibajestani, Zahra and Yürüm, Alp and Yürüm, Yuda (2016) Significant improvement in the hydrogen storage capacity of a reduced graphene oxide/TiO2 nanocomposite by chemical bonding of Ti-O-C. RSC Advances, 6 (39). pp. 32831-32838. ISSN 2046-2069 (Print) 2046-2069 (Online)

Güven, Zekiye Pelin and Üstbaş, Burçin and Harkness, Kellen M. and Coşkun, Hikmet and Joshi, Chakra P. and Besong, Tabot M. D. and Stellacci, Francesco and Bakr, Osman M. and Akbulut, Özge (2016) Synthesis and characterization of mixed ligand chiral nanoclusters. Dalton Transactions, 45 (28). pp. 11297-11300. ISSN 1477-9226 (Print) 1477-9234 (Online)

H

Hendessi, Saman and Seviniş, Emine Billur and Ünal, Serkan and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Ünal, Hayriye (2016) Antibacterial sustained-release coatings from halloysite nanotubes/waterborne polyurethanes. Progress in Organic Coatings, 101 . pp. 253-261. ISSN 0300-9440

I

Işıkel Şanlı, Lale and Bayram, Vildan and Yarar, Begüm and Ghobadi, Sajjad and Alkan Gürsel, Selmiye (2016) Development of graphene supported platinum nanoparticles for polymer electrolyte membrane fuel cells: Effect of support type and impregnation-reduction methods. International Journal of Hydrogen Energy, 41 (5). pp. 3414-3427. ISSN 0360-3199 (Print) 1879-3487 (Online)

J

Jia, Junjun and Ow-Yang, Cleva W. and İnan Akmehmet, Güliz and Nakamura, Shin-ichi and Kato, Kunihisa and Shigesato, Yuzo (2016) Formation of homologous In2O3(ZnO)(m) thin films and its thermoelectric properties. Journal of Vacuum Science and Technology A, 34 (4). ISSN 0734-2101 (Print) 1520-8559 (Online)

K

Karimzadehkhouei, Mehrdad and Sadaghiani, Abdolali Khalili and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2016) Experimental study on heat transfer of multi-walled carbon nanotubes/water nanofluids in horizontal microtubes. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis, Singapore

Keulen, Casey J. and Akay, Erdem and Melemez, Fazlı Fatih and Kocaman, Esat Selim and Deniz, Ataman and Yılmaz, Çağatay and Boz, Talha and Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2016) Prediction of fatigue response of composite structures by monitoring the strain energy release rate with embedded fiber Bragg gratings. Journal of Intelligent Material Systems and Structures, 27 (1). pp. 17-27. ISSN 1045-389X (Print) 1530-8138 (Online)

Khalili Sadaghiani, Abdolali and Koşar, Ali (2016) Numerical and experimental investigation on the effects of diameter and length on high mass flux subcooled flow boiling in horizontal microtubes. International Journal of Heat and Mass Transfer, 92 . pp. 824-837. ISSN 0017-9310 (Print) 1879-2189 (Online)

Khalili Sadaghiani, Abdolali and Şişman, Yağmur and Özaydın İnce, Gözde and Koşar, Ali (2016) An experimental study on flow boiling characteristics of phema nano-coated surfaces in a microchannel. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer (MNHMT2016), Biopolis, Singapore

Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2016) Numerical modeling of convective heat transfer of thermally developing nanofluid flows in a horizontal microtube. International Journal of Thermal Sciences, 109 . pp. 54-69. ISSN 1290-0729 (Print) 1778-4166 (Online)

Kılıç, Deniz and Üstbaş, Burçin and Budak, Ece Polen and Eyisoylu, Hande and Yılmaz, Cem and Eldem, Barkin and Akbulut, Özge (2016) Silicone-based composites as surgical breast models for oncoplasty training. In: Humanitarian Technology: Science, Systems and Global Impact (HumTech2016), Boston, United States

Köken, Deniz (2016) Synthesis and optimization of boron nitride nanotubes for stable aqueous dispersions. [Thesis]

Kurt, Hasan (2016) Investigating the effects of nanostructured dielectric lithium fluoride and plasmonic gold interlayers in organic photovoltaics, including the use of in-situ impedance spectroscopy. [Thesis]

Kurt, Hasan and Ow-Yang, Cleva W. (2016) Impedance spectroscopy analysis of the photophysical dynamics due to the nanostructuring of anode interlayers in organic photovoltaics. Physica Status Solidi A . ISSN 1862-6300 (Print) 1862-6319 (Online) Published Online First http://dx.doi.org/10.1002/pssa.201600314

L

Levanyuk, A. P. and Minyukov, S. A. and Mısırlıoğlu, Burç (2016) Negative bulk modulus and possibility of loss of elastic stability near tricritical transitions in thin films on substrates. Ferroelectrics, 500 (1). pp. 116-128. ISSN 0015-0193 (Print) 1563-5112 (Online)

M

Mısırlıoğlu, Burç and Şen, Canhan and Kesim, M. T. and Alpay, S. P. (2016) Low-voltage ferroelectric-paraelectric superlattices as gate materials for field-effect transistors. Journal of Materials Science, 51 (1). pp. 487-498. ISSN 0022-2461 (Print) 1573-4803 (Online)

Mısırlıoğlu, Burç and Şendur, Kürşat (2016) Ferroelectric/semiconductor/tunnel-junction stacks for nondestructive and low-power read-out memory. IEEE Transactions on Electron Devices, 63 (6). pp. 2374-2379. ISSN 0018-9383 (Print) 1557-9646 (Online)

Mohamadi, Mahboube and Garmabi, Hamid and Papila, Melih (2016) Effect of miscibility state on crystallization behavior and polymorphism in crystalline/crystalline blends of poly(vinylidene fluoride)/poly(ethylene oxide). Macromolecular Research, 24 (8). pp. 698-709. ISSN 1598-5032 (Print) 2092-7673 (Online)

N

Nadernezhad, Ali and Khani, Navid and Akdeniz Skvortsov, Gözde and Toprakhisar, Burak and Bakırcı, Ezgi and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koç, Bahattin (2016) Multifunctional 3D printing of heterogeneous hydrogel structures. Scientific Reports, 6 . ISSN 2045-2322

Nasef, Mohamed Mahmoud and Alkan Gürsel, Selmiye and Karabelli, Duygu and Güven, Olgun (2016) Radiation-grafted materials for energy conversion and energy storage applications. Progress in Polymer Science, 63 . pp. 1-41. ISSN 0079-6700 (Print) 1873-1619 (Online)

Nechaev, Yu S. and Filippova, V. P. and Tomchuk, A. A. and Yürüm, Alp and Yürüm, Yuda and Veziroğlu, T. N. (2016) On the spillover effect of the solid H2 intercalation into GNF's. Nanosystems: Physics, Chemistry, Mathematics, 7 (1). pp. 204-209. ISSN 2220-8054 (Print) 2305-7971 (Online)

Nedaei, Masoumeh and Armağan, Efe and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali (2016) Enhancemet of flow boiling heat transfer in pHEMA/pPFDA coated microtubes with longitudinal variations in wettability. AIP Advances, 6 (3). ISSN 2158-3226

Noberi, Cansu and Kaya, Figen and Kaya, Cengiz (2016) Synthesis, structure and characterization of hydrothermally synthesized Ag-TiO2 nano-structures onto Ni filters using electrophoretic deposition. Ceramics International, 42 (15). pp. 17202-17209. ISSN 0272-8842 (Print) 1873-3956 (Online)

O

Okyay Öner, Firuze and Yürüm, Alp and Yürüm, Yuda (2016) Non-isothermal kinetics of pyrolysis of Turkish petroleum pitches. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38 (15). pp. 2197-2204. ISSN 1556-7036 (Print) 1556-7230 (Online)

P

Popilevsky, L. and Skripnyuk, V. M. and Beregovsky, M. and Sezen, Meltem and Amouyal, Y. and Rabkin, E. (2016) Hydrogen storage and thermal transport properties of pelletized porous Mg-2 wt.% multiwall carbon nanotubes and Mg-2 wt.% graphite composites. International Journal of Hydrogen Energy, 41 (32). pp. 14461-14474. ISSN 0360-3199 (Print) 1879-3487 (Online)

R

Rahmat, Amin and Tofighi, Nima and Yıldız, Mehmet (2016) Numerical simulation of the electrohydrodynamic effects on bubble rising using the SPH method. (Accepted)

S

Sadeghi, Sahl (2016) Novel radiation grafted membranes based on fluorinated polymers for proton exchange membrane fuel cell. [Thesis]

Sadighikia, Sina (2016) 3D electron microscopy investigations of human dentin and ion beam irradiation effect on biocompatible anatase TiO2 using focused ion beam based techniques. [Thesis]

Saner Okan, Burcu and Marset Castro, Azucena and Seyyed Monfared Zanjani, Jamal and Akkuş Sut, Pınar and Şen, Özlem and Çulha, Mustafa and Menceloğlu, Yusuf Z. (2016) Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l-lactide-co-ε-caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation. Journal of Applied Polymer Science, 133 (22). ISSN 0021-8995 (Print) 1097-4628 (Online)

Sarıer, Nihal and Arat, Refik and Menceloğlu, Yusuf Z. and Önder, Emel and Boz, Ezgi Ceren and Oğuz, Oğuzhan (2016) Production of PEG grafted PAN copolymers and their electrospun nanowebs as novel thermal energy storage materials. Thermochimica Acta, 643 . pp. 83-93. ISSN 0040-6031 (Print) 1872-762X (Online)

Seyyed Monfared Zanjani, Jamal (2016) Novel design and manufacturing of advanced multifunctional structural nanocomposites containing self-healing fibers and graphene sheets with structural health monitoring capabilities. [Thesis]

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. (2016) Manufacturing of multilayer graphene oxide/poly(ethylene terephthalate) nanocomposites with tunable crystallinity, chain orientations and thermal transitions. Materials Chemistry and Physics, 176 . pp. 58-67. ISSN 0254-0584 (Print) 1879-3312 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2016) Nano-engineered design and manufacturing of high-performance epoxy matrix composites with carbon fiber/selectively integrated graphene as multi-scale reinforcements. RSC Advances, 6 (12). pp. 9495-9506. ISSN 2046-2069 (Print) 2046-2069 (Online)

Sezen, Meltem (2016) Focused ion beams (FIB): novel methodologies and recent applications for multidisciplinary sciences. In: Janeček, Miloš and Kral, Robert, (eds.) Modern Electron Microscopy in Physical and Life Sciences. InTech, Rijeka, Croatia. ISBN 978-953-51-2252-4

Shojaeian, Mostafa and Koşar, Ali (2016) Convective heat transfer of non-Newtonian power-law slip flows with variable thermophysical properties in parallel-plate and circular microchannels. International Journal of Thermal Sciences, 100 . pp. 155-168. ISSN 1290-0729 (Print) 1778-4166 (Online)

Shojaeian, Mostafa and Sezen, Meltem and Koşar, Ali (2016) Pool boiling heat transfer characteristics of non-Newtonian Xanthan gum solutions. Experimental Thermal and Fluid Science, 70 . pp. 77-84. ISSN 0894-1777 (Print) 1879-2286 (Online)

Shojaeian, Mostafa and Yıldızhan, Melike Mercan and Coşkun, Ömer and Özkalay, Ebrar and Tekşen, Yiğit and Gülgün, Mehmet Ali and Yağcı Acar, Havva and Koşar, Ali (2016) Investigation of change in surface morphology of heated surfaces upon pool boiling of magnetic fluids under magnetic actuation. Materials Research Express, 3 (9). ISSN 2053-1591

T

Tofighi, Nima and Özbulut, Murat and Feng, James J. and Yıldız, Mehmet (2016) The effect of normal electric field on the evolution of immiscible Rayleigh-Taylor instability. Theoretical and Computational Fluid Dynamics, 30 (5). pp. 469-483. ISSN 0935-4964 (Print) 1432-2250 (Online)

Toprakhisar, Burak and Bakırcı, Ezgi and Koç, Bahattin (2016) 3D bioprinting stem-cells with solubilized tendon extracellular matrix (ECM) based hydrogel. In: Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden

W

Winterstein, Jonathan P. and Sezen, Meltem and Renik, Aleksander and Carter, C. Barry (2016) Electron microscopy observations of the spinel-forming reaction using MgO nanocubes on Al2O3 substrates. Journal of Materials Science, 51 (1). pp. 144-157. ISSN 0022-2461 (Print) 1573-4803 (Online)

Y

Yarali, Miad and Biçer, Emre and Alkan Gürsel, Selmiye and Yürüm, Alp (2016) Expansion of titanate nanotubes by the use of a surfactant and its improved performance as an anode in Li-ion batteries. Electrochimica Acta, 220 . pp. 453-464. ISSN 0013-4686 (Print) 1873-3859 (Online)

Yıldızhan, Melike Mercan (2016) Structural and electronic investigation of Li2O-TiO2 system. [Thesis]

Yıldızhan, Melike Mercan and Sturm, Saso and Gülgün, Mehmet Ali (2016) Structural and electronic modifications on TiO2 anatase by Li, K or Nb doping below and above the solubility limit. Journal of Materials Science, 51 (12). pp. 5912-5923. ISSN 0022-2461 (Print) 1573-4803 (Online)

Yılmaz, Çağatay and Akalın, Çağdaş and Kocaman, Esat Selim and Suleman, A. and Yıldız, Mehmet (2016) Monitoring Poisson's ratio of glass fiber reinforced composites as damage index using biaxial Fiber Bragg Grating sensors. Polymer Testing, 53 . pp. 98-107. ISSN 0142-9418 (Print) 1873-2348 (Online)

Z

Zohour, Bahman and Yılgör, İskender and Gülgün, Mehmet Ali and Birer, Özgür and Ünal, Uğur and Leidholm, Craig and Şenkan, Selim (2016) Discovery of superior Cu-GaOx-HoOy catalysts for the reduction of carbon dioxide to methanol at atmospheric pressure. ChemCatChem, 8 (8). pp. 1464-1469. ISSN 1867-3880 (Print) 1867-3899 (Online)

Ç

Çakıroğlu, Dilek (2016) An investigation on electrochemical performance of supercapacitors assembled with vertically aligned & entangled carbon nanotube and conductive polymer. [Thesis]

Çorapcıoğlu, Gülcan (2016) Conventional and flash sintering of stoichiometric alkaline or niobium excess sodium potassium niobate ceramics. [Thesis]

Çorapcıoğlu, Gülcan and Gülgün, Mehmet Ali and Kisslinger, Kim and Sturm, Saso and Jha, Shikhar K. and Raj, Rishi (2016) Microstructure and microchemistry of flash sintered K0.5Na0.5NbO3. Journal of the Ceramic Society of Japan, 124 (4). pp. 321-328. ISSN 1882-0743 (Print) 1882-0743 (Online)

Ö

Örüm, Aslıhan and Yıldızhan, Melike Mercan and Sezen, Meltem and Gülgün, Mehmet Ali and Takatori, Kazumasa and Kadoura, Hiroaki and Yoshimura, Masamichi and Tani, Toshihiko (2016) Transmission electron microscopy of topochemical conversion interface between La2Ti2O7 reactive template and perovskite product Li(0.16)LA(0.62)TiO(3) electrolyte. Solid State Ionics, 296 . pp. 78-84. ISSN 0167-2738 (Print) 1872-7689 (Online)

Ü

Ürk, Deniz and Demir, Elif and Bulut, Osman and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Öveçoğlu, Lütfi and Cebeci, Hülya (2016) Understanding the polymer type and CNT orientation effect on the dynamic mechanical properties of high volume fraction CNT polymer nanocomposites. Composite Structures, 155 . pp. 255-262. ISSN 0263-8223 (Print) 1879-1085 (Online)

İ

İnan Akmehmet, Güliz and Sturm, Saso and Bocher, Laura and Kociak, Mathieu and Ambrozic, Bojan and Ow-Yang, Cleva W. (2016) Structure and luminescence in long persistence Eu, Dy, and B codoped strontium aluminate phosphors: the Boron effect. Journal of the American Ceramic Society, 99 (6). pp. 2175-2180. ISSN 0002-7820 (Print) 1551-2916 (Online)

Ş

Şişman, Yağmur and Khalili Sadaghiani, Abdolali and Khedir, Khedir R. and Brozak, Matthew and Karabacak, Tansel and Koşar, Ali (2016) Subcooled flow boiling over microstructured plates in rectangular minichannels. Nanoscale and Microscale Thermophysical Engineering, 20 (3-4). pp. 173-190. ISSN 1556-7265 (Print) 1556-7273 (Online)

Şişman, Yağmur and Sadaghiani, Abdolali Khalili and Khedir, Ramazan and Karabacak, Tansel and Koşar, Ali (2016) Nucleate boiling heat transfer enhancement using nanostructured al-alloy plates. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis, Singapore

This list was generated on Fri Apr 12 17:48:13 2024 +03.