title   
  

Experimental and numerical investigation of inlet temperature effect on convective heat transfer of γ-Al2O3/water nanofluid flows in microtubes

Karimzadehkhouei, Mehrdad and Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Akgönül, Sarp and Özbey, Arzu and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2018) Experimental and numerical investigation of inlet temperature effect on convective heat transfer of γ-Al2O3/water nanofluid flows in microtubes. Heat Transfer Engineering . ISSN 0145-7632 (Print) 1521-0537 (Online) Published Online First http://dx.doi.org/10.1080/01457632.2018.1442305

This is the latest version of this item.

Full text not available from this repository.

Official URL: http://dx.doi.org/10.1080/01457632.2018.1442305

Abstract

Nanofluids are the combination of a base fluid with nanoparticles with sizes of 1-100 nm. In order to increase the heat transfer performance, nanoparticles with higher thermal conductivity compared to that of base fluid are introduced into the base fluid. Main parameters affecting single-phase and two-phase heat transfer of nanofluids are shape, material type and average diameter of nanoparticles, mass fraction and stability of nanoparticles, surface roughness and fluid inlet temperature. In this study, the effect of inlet temperature of deionized (DI) water/alumina (Al2O3) nanoparticle nanofluids was both experimentally and numerically investigated. Nanofluids with a mass fraction of 0.1% were tested inside a microtube having inner and outer diameters of 889 and 1067 micrometers, respectively, for hydrodynamically developed and thermally developing laminar flows at Reynolds numbers of 650, 1000, and 1300. According to the obtained numerical and experimental results, the inlet temperature effect was more pronounced for the thermally developing region. The performance enhancement with nanoparticles was obtained at rather higher Reynolds numbers and near the inlet of the microtube. There was a good agreement between the experimental and numerical results so that the numerical approach could be further implemented in future studies on nanofluid flows.

Item Type:Article
Subjects:Q Science > Q Science (General)
T Technology > TJ Mechanical engineering and machinery > TJ163.12 Mechatronics
ID Code:34684
Deposited By:Mehrdad Karimzadehkhouei
Deposited On:15 May 2018 10:58
Last Modified:15 May 2018 10:58

Repository Staff Only: item control page