Items where Subject is "TS Manufactures"

Article

Altekin, F. Tevhide and Kandiller, Levent and Özdemirel, Nur Evin (2008) Profit-oriented disassembly-line balancing. International Journal of Production Research, 46 (10). pp. 2675-2693. ISSN 0020-7543

Altekin, Fatma Tevhide (2017) A comparison of piecewise linear programming formulations for stochastic disassembly line balancing. International Journal of Production Research, 55 (24). pp. 7412-7434. ISSN 0020-7543 (Print) 1366–588X (Online)

Altekin, Fatma Tevhide and Akkan, Can (2012) Task-failure-driven rebalancing of disassembly lines. International Journal of Production Research, 50 (18). pp. 4955-4976. ISSN 0020-7543 (Print) 1366–588X (Online)

Altıntaş, Y. and Kersting, P. and Biermann, D. and Budak, Erhan and Denkena, B. and Lazoğlu, I. (2014) Virtual process systems for part machining operations. CIRP Annals - Manufacturing Technology, 63 (2). pp. 585-605. ISSN 0007-8506 (Print) 1726-0604 (Online)

Arslan, M. Çağdaş and Çatay, Bülent and Budak, Erhan (2004) A decision support system for machine selection. Journal of Manufacturing Technology Management, 15 (1). pp. 101-109. ISSN 1741-038X

Bayındır, Z. P. and Birbil, Ş. İlker and Frenk, J. B. G. (2007) A deterministic inventory/production model with general inventory cost rate function and piecewise linear concave production costs. European Journal of Operational Research, 179 (1). pp. 114-123. ISSN 0377-2217

Bayındır, Z. P. and Birbil, Ş. İlker and Frenk, J. B. G. (2006) The joint replenishment problem with variable production costs. European Journal of Operational Research, 175 (1). pp. 622-640. ISSN 0377-2217

Berkün, Işıl and Kızıltaş, Güllü (2018) Optimization of dry powder deposition parameters for production of large substrates using functionally graded ceramics. International Journal of Applied Ceramic Tecnology, 15 (5). pp. 1199-1211. ISSN 1546-542X (Print) 1744-7402 (Online)

Chimate, Chetan and Koç, Bahattin (2014) Pressure assisted multi-syringe single nozzle deposition system for manufacturing of heterogeneous tissue scaffolds. International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 317-330. ISSN 0268-3768 (Print) 1433-3015 (Online)

Çatay, Bülent and Erengüç, Ş. Selçuk and Vakharia, Asoo J. (2003) Tool capacity planning in semiconductor manufacturing. Computers & Operations Research, 30 (9). pp. 1349-1366. ISSN 0305-0548

Çatay, Bülent and Vakharia, Asoo J. and Erengüç, S. Selçuk (2006) Printed circuit board scheduling in an openshop manufacturing environment. International Journal of Advanced Manufacturing Technology, 29 (9-10). pp. 980-989. ISSN 0268-3768 (Print) 1433-3015 (Online)

Jamshidi, Hamid and Budak, Erhan (2021) A 3D analytical thermal model in grinding considering a periodic heat source under dry and wet conditions. Journal of Materials Processing Technology, 295 . ISSN 0924-0136 (Print) 1873-4774 (Online)

Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study. Materials & Design, 109 . pp. 123-132. ISSN 0264-1275 (Print) 1873-4197 (Online)

Marques, Ricardo and Ünel, Mustafa and Yıldız, Mehmet and Suleman, Afzal (2019) Remaining useful life prediction of laminated composite materials using thermoelastic stress analysis. Composite Structures, 210 . pp. 381-390. ISSN 0263-8223 (Print) 1879-1085 (Online)

Noyan, Nilay and Prékopa, András (2006) A variant of the Hungarian inventory control model. International journal of production economics, 103 (2). pp. 784-797. ISSN 0925-5273

Poyraz, Özgür and Yasa, Evren and Tunç, Lütfi Taner and Kilicay, Koray (2021) Parametric simulations for residual stresses and distortions of Inconel 625 fabricated by laser powder bed fusion additive manufacturing. Journal of Additive Manufacturing Technologies, 1 (2). ISSN 2749-3229

Samanta, Kuntal and Özbolat, İbrahim T. and Koç, Bahattin (2014) Optimized normal and distance matching for heterogeneous object modeling. Computers & Industrial Engineering, 69 . pp. 1-11. ISSN 0360-8352 (Print) 1879-0550 (Online)

Sivrikaya Şerifoğlu, Funda and Ulusoy, Gündüz (2004) Multiprocessor task scheduling in multistage hyrid flowshops: a genetic algorithm approach. Journal of the Operational Research Society, 55 (5). pp. 504-512. ISSN 0160-5682

Yılmaz, Pınar and Çatay, Bülent (2006) Strategic level three-stage production distribution planning with capacity expansion. Computers & Industrial Engineering, 51 (4). pp. 609-620. ISSN 0360-8352

Papers in Conference Proceedings

Altekin, Fatma Tevhide (2016) A piecewise linear model for stochastic disassembly line balancing. In: 8th IFAC Conference on Manufacturing Modelling, Management and Control (MIM), Troyes, France

Aydın, Mehmet Serhat and Kızıltaş, Güllü and Kuloğlu, Büşra (2018) Fabrication of composite bone scaffolds with controlled multi-scale porosity using non-solvent induced phase separation based 3D printing. In: Materials Research Society Fall 2018 Meetings, Boston, USA

Bülbül, Kerem (2005) Job shop scheduling with earliness, tardiness and intermediate inventory holding costs. In: MISTA Conference 2005, New York, NY, USA, New York

Çatay, Bülent and Göl, Hakan (2007) Logistics outsourcing and 3PL selection: A Case study in an automotive supply chain. In: 86th Annual Meeting of the Transportation Research Board,

Ertek, Gürdal and Aksu, Burak and Birbil, Ş. İlker and İkikat, Cihan and Yıldırmaz, Can (2005) Application of local search methods for solving a quadratic assignment problem: A case study. In: International Conference on Computers and Industrial Engineering, Istanbul, Turkey

Gökçe, Elif İlke and Çatay, Bülent (2005) A revised ant colony system for the vehicle routing problem with time windows. In: 35th International Conference on Computers & Industrial Engineering, İstanbul, Turkey

Khan, Shahzad and Şabanoviç, Asif (2006) Discrete-time sliding mode control of high precision linear drive using frictional model. In: 9th International Workshop on Advanced Motion Control, Istanbul, Turkey

Kienast, Pascal and Tunç, Lütfi Taner and Koca, Recep and Olgu, Ozan and Ganser, Philip and Bergs, Thomas (2023) Improving dynamic process stability in finishing of thin-walled workpieces by optimal selection of stock shape. In: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy

Öztürk, Erdem and Budak, Erhan (2006) 5 eksen frezelemede kuvvet ve şekil hatalarının modellenmesi. In: TIMAK Conference, Balıkesir, Turkey

Sağıroğlu, Mahmut Şamil and Erçil, Aytül (2006) A texture based matching approach for automated assembly of puzzles. In: 18th International Conference on Pattern Recognition (ICPR 2006), Hong Kong, China

Saka, Behlül and Ertek, Gürdal and Türkseven, Can Hulusi (2006) Development of an interactive simulation of steel cord manufacturing for industrial engeneering education. In: 5th International Symposium on Intelligent Manufacturing Systems, Sakarya, Turkey, Sakarya, Turkey

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Kinematic based selection of the workpiece location in robotic milling. In: International Symposium on Machining, Antalya, Turkey

Saygıner, Osman and Kızıltaş, Güllü (2017) Fabrication of functionally graded ceramic- polymer dielectrics via freeze casting for RF applications. In: IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, San Diego, USA

Sheikhi, Mohammad and Gutiu, Eugene and Moldovan, Catalin and Tunç, Lütfi Taner (2023) Effects of process parameters on the quality off non-planar 5-axis printing of free form surfaces. In: 15th International Conference on Modern Technologies In Manufacturing (MTeM 2023), Cluj Napoca, Romania

Şimşek, Eren and Yördem, Sinan Onur and Menceloğlu, Yusuf Z. and Papila, Melih (2006) Optimization of superhydrophobic surfaces generated by electrospinning. In: AMERICAN CHEMICAL SOCIETY,

Tunç, L. Taner and Budak, Erhan (2006) 5 eksen frezeleme süreçlerinin modelleme yoluyla benzetimi ve eniyilenmesi. In: TIMAK Conference, Balikesir, Turkey

Urresti, Ramon Torres Iker and Tunç, Lütfi Taner and Munoa, Jokin and Memis, Namik Kemal and Orbegozo, Iban and Ece, Remzi Ecmel and Torres, Ramon (2021) Spindle and cutting tools for internal suction of chip and dust in CFRP trimming. In: 11th International Congress on Machining (UTIS 2021), Antalya, Turkey

Book Section / Chapter

Doyuran, Tamer and Çatay, Bülent (2008) Two enhanced savings functions for the Clark-Wright algorithm. In: Blecker, Thorsten and Kersten, Wolfgang and Gertz, Carsten, (eds.) Management in Logistics Networks and Nodes: Concepts, Technology and Applications. Operations and Technology Management (8). Erich Schmidt Verlag, Berlin, Germany, pp. 245-258. ISBN 9783503112272

Thesis

Mandal, Sefa Kemal (2019) Damage detection in carbon fiber reinforced polymeric composites and honeycomb sandwich panels by active thermography. [Thesis]

Uzun, Fatih (2020) Multidisciplinary investigation of C-Type composite sandwich radome panels within the scope of acoustic emission based damage characterization and electromagnetic transmission performance. [Thesis]