Items where Subject is "TJ241-254.7 Machine construction (General)"

Group by: Creators | Item Type
Jump to: A | B | E | H | J | M | R | T | U | Y | Ç | Ö
Number of items at this level: 19.

A

Aksu, Burak and Çelebi, Ceren and Budak, Erhan (2016) An experimental investigation of oblique cutting mechanics. Machining Science and Technology, 20 (3). pp. 495-521. ISSN 1091-0344 (Print) 1532-2483 (Online)

Altıntaş, Y. and Kersting, P. and Biermann, D. and Budak, Erhan and Denkena, B. and Lazoğlu, I. (2014) Virtual process systems for part machining operations. CIRP Annals - Manufacturing Technology, 63 (2). pp. 585-605. ISSN 0007-8506 (Print) 1726-0604 (Online)

Azvar, Milad and Budak, Erhan (2017) Multi-dimensional chatter stability for enhanced productivity in different parallel turning strategies. International Journal of Machine Tools and Manufacture, 123 . pp. 116-128. ISSN 0890-6955 (Print) 1879-2170 (Online)

B

Bagherzadeh, Amin and Budak, Erhan (2018) Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach. Tribology International, 119 . pp. 510-520. ISSN 0301-679X (Print) 1879-2464 (Online)

Bagherzadeh, Amin and Kuram, Emel and Budak, Erhan (2021) Experimental evaluation of eco-friendly hybrid cooling methods in slot milling of titanium alloy. Journal of Cleaner Production, 289 . ISSN 0959-6526 (Print) 1879-1786 (Online)

E

Ebrahimi Araghizad, Arash and Tehranizadeh, Faraz and Kılıç, Kemal and Budak, Erhan (2023) Smart tool-related faults monitoring system using process simulation-based machine learning algorithms. In: XXXIV CIRP Sponsored Conference, Karpacz, Poland

Evren, Sanem and Ünel, Mustafa and Akşit, Mahmut Faruk (2013) Modeling and control of a variable speed variable pitch angle prototype wind turbine. Mathematical and Computational Applications, 18 (3). pp. 408-420. ISSN 1300-686X

H

Hatipoğlu, Ersen and Budak, Erhan (2014) Mikro frezeleme işleminde kesme parametrelerinin yüzey ve talaş oluşumuna etkisinin deneysel olarak incelenmesi (Experimental investigation of cutting parameters effect on surface generation and burr formation in micro milling). In: 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye

J

Jamshidi, Hamid and Budak, Erhan (2020) An analytical grinding force model based on individual grit interaction. Journal of Materials Processing Technology, 283 . ISSN 0924-0136 (Print) 1873-4774 (Online)

M

Mohammadi, Yaser and Azvar, Milad and Budak, Erhan (2018) Suppressing vibration modes of spindle-holder-tool assembly through FRF modification for enhanced chatter stability. CIRP Annals - Manufacturing Technology, 67 (1). pp. 397-400. ISSN 0007-8506 (Print) 1726-0604 (Online)

R

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2017) Development of turn-milling machine tool program parameters based on basic cutting geometry. In: 8th International Symposium on Machining, Antalya, Turkey

Rahimzadeh Berenji, Kaveh and Ozsahin, Orkun and Budak, Erhan (2021) Effect of spindle design on spindle dynamics and chatter stability. In: International Symposium on Precision Engineering and Sustainable Manufacturing PRESM2021, Jeju, South Korea

Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2018) Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1617-1634. ISSN 0268-3768 (Print) 1433-3015 (Online)

T

Tehranizadeh, Faraz and Budak, Erhan (2017) Design of serrated end mills for improved productivity. In: 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Cluny, France

Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems. Mechanical Systems and Signal Processing, 111 . pp. 423-441. ISSN 0888-3270 (Print) 1096-1216 (Online)

U

Uysal, Emre and Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa (2014) Dik frezeyle tornalama işleminde eksenler arası ofsetin etkisi ve takım ömrü (Tool life and the effect of axis offset in orthogonal turn-milling). In: 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye

Y

Yüksel, Esra and Budak, Erhan and Özlü, Emre and Oral, Ahmet and İğrek, Fatih and Tosun, Fulya (2021) Prediction of thermal growth in a high-speed spindle by considering thermo-mechanical behavior. MM Science Journal, 2021 . pp. 4526-4533. ISSN 1803-1269 (Print) 1805-0476 (Online)

Ç

Çomak, Alptunç and Budak, Erhan (2016) Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability. (Accepted)

Ö

Özlü, Emre and Ebrahimi Araghizad, Arash and Budak, Erhan (2020) Broaching tool design through force modelling and process simulation. CIRP Annals - Manufacturing Technology, 69 (1). pp. 53-56. ISSN 0007-8506 (Print) 1726-0604 (Online)

This list was generated on Tue Dec 10 16:18:30 2024 +03.