Items where Division is "Integrated Manufacturing Technologies Research and Application Center" and Year is 2020

Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | E | J | K | L | M | R | S | T | Y | Ç | Ö
Number of items: 38.

A

Abdollahzadeh, Mohammadamin and Kefal, Adnan and Yıldız, Mehmet (2020) A comparative and review study on shape and stress sensing of flat/curved shell geometries using C0-continuous family of iFEM elements. Sensors, 20 (14). ISSN 1424-8220

Acar, Türkan Ormancı and Taş, Cüneyt Erdinç and Keskin, Başak and Seviniş Özbulut, Emine Billur and Turken, Turker and İmer, Derya Yüksel and Tüfekçi, Neşe and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2020) Thin-film composite nanofiltration membranes with high flux and dye rejection fabricated from disulfonated diamine monomer. Journal of Membrane Science, 608 . ISSN 0376-7388 (Print) 1873-3123 (Online)

Afghah, Seyedeh Ferdows and Altunbek, Mine and Dikyol, Caner and Koç, Bahattin (2020) Preparation and characterization of nanoclay-hydrogel composite support-bath for bioprinting of complex structures. Scientific Reports, 10 (1). ISSN 2045-2322

Afghah, Seyedeh Ferdows and Ullah, Mohib and Zanjani, Jamal Seyyed Monfared and Süt, Pınar Akkuş and Şen, Özlem and Emanet, Melis and Saner Okan, Burcu and Çulha, Mustafa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Koç, Bahattin (2020) 3D printing of silver-doped polycaprolactone-poly(propylene succinate) composite scaffolds for skin tissue engineering. Biomedical Materials, 15 (3). ISSN 1748-6041 (Print) 1748-605X (Online)

Alkhateab, Baidaa and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Rahimi, Mohammad Naqib and Haghighi Poudeh, Leila and Kefal, Adnan and Yıldız, Mehmet (2020) Damage mechanisms in CFRP/HNT laminates under flexural and in-plane shear loadings using experimental and numerical methods. Composites Part A: Applied Science and Manufacturing, 136 . ISSN 1359-835X (Print) 1878-5840 (Online)

Anıl, Deniz and Berksun, Ekin and Durmuş Sayar, Ayşe and Seviniş Özbulut, Emine Billur and Ünal, Serkan (2020) Recent advances in waterborne polyurethanes and their nanoparticle-containing dispersions. In: Zarras, Peter and Soucek, Mark D. and Tiwari, Atul, (eds.) Handbook of Waterborne Coatings. Elsevier, Amsterdam, Netherlands, pp. 249-302. ISBN 978-0-12-814201-1

B

Berktaş, İlayda and Ghafar, Ali Nejad and Fontana, Patrick and Çaputcu, Ayten and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) Facile synthesis of graphene from waste tire/silica hybrid additives and optimization study for the fabrication of thermally enhanced cement grouts. Molecules, 25 (4). ISSN 1420-3049

Berktaş, İlayda and Ghafar, Ali Nejad and Fontana, Patrick and Çaputcu, Ayten and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) Synergistic effect of expanded graphite-silane functionalized silica as a hybrid additive in improving the thermal conductivity of cementitious grouts with controllable water uptake. Energies, 13 (14). ISSN 1996-1073

Berktaş, İlayda and Hezarkhani, Marjan and Haghighi Poudeh, Leila and Saner Okan, Burcu (2020) Recent developments in the synthesis of graphene and graphene-like structures from waste sources by recycling and upcycling technologies: a review. Graphene Technology . ISSN 2365-6301 (Print) 2365-631X (Online) Published Online First http://dx.doi.org/10.1007/s41127-020-00033-1

Beylergil, Bertan and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Saeidiharzand, Shaghayegh and Haghighi Poudeh, Leila and Yıldız, Mehmet (2020) Experimental failure analysis and mechanical performance evaluation of fiber-metal sandwich laminates interleaved with polyamide-6,6 interlayers through the combined usage of acoustic emission, thermography and microscopy techniques. Journal of Sandwich Structures and Materials . ISSN 1099-6362 (Print) 1530-7972 (Online) Published Online First http://dx.doi.org/10.1177/1099636220924654

Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner (2020) Improved vision based pose estimation for industrial robots via sparse regression. In: 2020 International Conference on Intelligent Computing, Bari, Italy

Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin (2020) Localization and estimation of bending and twisting loads using neural networks. In: 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), Singapore

Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin (2020) Realtime localization and estimation of loads on aircraft wings from depth images. Sensors, 20 (12). ISSN 1424-8220

D

Daskalakis, Evangelos and Liu, Fengyuan and Acar, Anıl Ahmet and Dinea, Edera-Elena and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bártolo, Paulo Jorge (2020) 3D-printed composite bone bricks for large bone tissue applications. In: 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), Thessaloniki, Greece

Daskalakis, Evangelos and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon (2020) Bioglasses for bone tissue engineering. In: Bártolo, Jorge and Bidanda, Bopaya, (eds.) Bio-materials and prototyping applications in medicine. Springer, Cham, Switzerland. ISBN 978-3-030-35875-4 (Print) 978-3-030-35876-1 (Online)

Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Yıldız, Mehmet (2020) An experimental study on tensile and bending properties of biaxial warp knitted textile composites. Advanced Composite Materials, 29 (1). pp. 73-88. ISSN 0924-3046 (Print) 1568-5519 (Online)

Dızman, Bekir and Şahin, Zeynep and Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Sümbül Boztaş, Ayşe Nur and Uçar, Ali Cuma and Nakipoğlu, Büşra (2020) Polyoxazolines: a review of their synthesis, properties, and applications. In: 32. Ulusal Kimya Kongresi, Online

E

Ertaş Uslu, Merve and Mısırlıoğlu, Burç and Şendur, Kürşat (2020) Crossover of spectral reflectance lineshapes in Ge-doped VO2 thin films. Optical Materials, 104 . ISSN 0925-3467 (Print) 1873-1252 (Online)

J

Jamshidi, Hamid and Budak, Erhan (2020) An analytical grinding force model based on individual grit interaction. Journal of Materials Processing Technology, 283 . ISSN 0924-0136 (Print) 1873-4774 (Online)

K

Kefal, Adnan (2020) A novel four-node inverse-plate element for shape and stress sensing of laminated composite and sandwich plates. Journal of the Faculty of Engineering and Architecture of Gazi University, 35 (4). pp. 1767-1781. ISSN 1300-1884 (Print) 1304-4915 (Online)

Kefal, Adnan and Öterkuş, Erkan (2020) Isogeometric iFEM analysis of thin shell structures. Sensors, 20 (9). ISSN 1424-8220

Khan, Raja Muhammad Awais and Emami Tabrizi, Isa and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2020) Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites. Polymer Testing, 90 . ISSN 0142-9418 (Print) 1873-2348 (Online)

Kolukısa, Deniz Can and Özbulut, Murat and Peşman, Emre and Yıldız, Mehmet (2020) Development of computationally efficient augmented Lagrangian SPH for incompressible flows and its quantitative comparison with WCSPH simulating flow past a circular cylinder. International Journal for Numerical Methods in Engineering, 121 (18). pp. 4187-4207. ISSN 0029-5981 (Print) 1097-0207 (Online)

L

Li, Mingyang and Kefal, Adnan and Cerik, Burak Can and Öterkuş, Erkan (2020) Dent damage identification in stiffened cylindrical structures using inverse finite element method. Ocean Engineering, 198 . ISSN 0029-8018

Li, Mingyang and Kefal, Adnan and Öterkuş, Erkan and Öterkuş, Selda (2020) Structural health monitoring of an offshore wind turbine tower using iFEM methodology. Ocean Engineering, 204 . ISSN 0029-8018

M

Mohammadjafari Sadeghi, Hadi and Mohammadpour, Mojtaba and Babayan, Morsal and Sojoudi, Atta and Chamkha, Ali J. (2020) Unsteady natural convection of water adjacent to the sidewall of a differentially heated cavity with multiple fins. International Communications in Heat and Mass Transfer, 116 . ISSN 0735-1933 (Print) 1879-0178 (Online)

R

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2020) Numerical investigation on effective toughening mechanisms of graded composites. In: Joint Event: ICCS23 - 23rd International Conference on Composite Structures & MECHCOMP6 - 6th International Conference on Mechanics of Composites, Porto, Portugal

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes. International Journal of Mechanical Sciences, 182 . ISSN 0020-7403

S

Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Ozunlu, Burcu Girginer and Yağcı, Yavuz Emre (2020) Graphene from waste tire by recycling technique for cost-effective and light-weight automotive plastic part production. In: 35th International Conference of the Polymer Processing Society (PPS 2019), Izmir, Turkey

Seviniş Özbulut, Emine Billur and Seven, Merve Senem and Bilge, Kaan and Akkaş, Tuğçe and Taş, Cüneyt Erdinç and Yıldız, Burçin and Atılgan, Canan and Menceloğlu, Yusuf Z. and Ünal, Serkan (2020) Blends of highly branched and linear poly(arylene ether sulfone)s: multiscale effect of the degree of branching on the morphology and mechanical properties. Polymer, 188 . ISSN 0032-3861 (Print) 1873-2291 (Online)

Seyyed Monfared Zanjani, Jamal and Beylergil, Bertan and Haghighi Poudeh, Leila and Alkhateab, Baidaa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2020) Effect of nanomaterials/nanofibers on the structure and properties of fiber-reinforced composites. In: Han, Baoguo and Sharma, Sumit and Nguyen, Tuan Anh and Longbiao, Li and Bhat, K. Subrahmanya, (eds.) Fiber-Reinforced Nanocomposites: Fundamentals and Applications. Elsevier, Amsterdam, pp. 157-182. ISBN 978-0-12-819904-6

Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Girginer Özünlü, Burcu and Yağcı, Yavuz Emre and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) Development of waste tire-derived graphene reinforced polypropylene nanocomposites with controlled polymer grade, crystallization and mechanical characteristics via melt-mixing. Polymer International, 69 (9). pp. 771-779. ISSN 0959-8103 (Print) 1097-0126 (Onlilne)

Sohouli, Abdol Rasoul and Kefal, Adnan and Abdelhamid, Ahmed and Yıldız, Mehmet and Suleman, Afzal (2020) Continuous density-based topology optimization of cracked structures using peridynamics. Structural and Multidisciplinary Optimization, 62 (5). pp. 2375-2389. ISSN 1615-147X (Print) 1615-1488 (Online)

T

Taş, Cüneyt Erdinç and Seviniş Özbulut, Emine Billur and Çeven, Ömer Faruk and Alkan Taş, Buket and Ünal, Serkan and Ünal, Hayriye (2020) Purification and sorting of halloysite nanotubes into homogeneous, agglomeration-free fractions by polydopamine functionalization. ACS Omega, 5 (29). pp. 17962-17972. ISSN 2470-1343

Y

Yılmaz, Çağatay and Topal, Serra and Ali, Hafiz Qasim and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Suleman, Afzal and Yıldız, Mehmet (2020) Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave. Composite Structures, 237 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Ç

Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Seyyed Monfared Zanjani, Jamal and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) New hybrid nano additives for thermoplastic compounding: CVD grown carbon fiber on graphene. In: 35th International Conference of the Polymer Processing Society (PPS), Izmir, Turkey

Ö

Özbulut, Murat and Ramezanzadeh, Shayan and Yıldız, Mehmet and Gören, Ömer (2020) Modelling of wave generation in a numerical tank by SPH method. Journal of Ocean Engineering and Marine Energy, 6 (2). pp. 121-136. ISSN 2198-6444 (Print) 2198-6452 (Online)

Özdemir, Murat and Kefal, Adnan and Imachi, Michiya and Tanaka, Satoyuki and Öterkuş, Erkan (2020) Dynamic fracture analysis of functionally graded materials using ordinary state-based peridynamics. Composite Structures, 244 . ISSN 0263-8223 (Print) 1879-1085 (Online)

This list was generated on Mon Jul 4 15:41:13 2022 +03.