Items where Division is "Manufacturing Systems Eng." and Year is 2023

Article

Akgün, Sercan and Şenol, Cahit Orhun and Kılıç, Göktuğ and Tabrizi, Isa Emami and Yıldız, Mehmet (2023) A novel damage evaluation of CFRPs under mode-I loading by using multi-instrument structural health monitoring methods. Engineering Fracture Mechanics, 286 . ISSN 0013-7944

Çelik, Dilara and Karaca, Ali and Koç, Bahattin (2023) Directed energy deposition of parts with internal channels using removable graphite supports. 3D Printing and Additive Manufacturing . ISSN 2329-7662 (Print) 2329-7670 (Online) Published Online First https://dx.doi.org/10.1089/3dp.2023.0057

Ebrahimi Araghizad, Arash and Tehranizadeh, Faraz and Kılıç, Kemal and Budak, Erhan (2023) Smart tool-related faults monitoring system using process simulation-based machine learning algorithms. Journal of Machine Engineering, 23 (4). pp. 18-32. ISSN 1895-7595 (Print) 2391-8071 (Online)

Nedjad, Syamak Hossein and Yıldız, Mehmet and Saboori, Abdollah (2023) Solidification behaviour of austenitic stainless steels during welding and directed energy deposition. Science and Technology of Welding and Joining, 28 (1). pp. 1-17. ISSN 1362-1718 (Print) 1743-2936 (Online)

Schmitz, Tony and Betters, Emma and Budak, Erhan and Yüksel, Esra and Park, Simon and Altıntaş, Yusuf (2023) Review and status of tool tip frequency response function prediction using receptance coupling. Precision Engineering, 79 . pp. 60-77. ISSN 0141-6359 (Print) 1873-2372 (Online)

Weng, Jian and Saelzer, Jannis and Berger, Sebastian and Zhuang, Kejia and Bagherzadeh, Amin and Budak, Erhan and Biermann, Dirk (2023) Analytical and experimental investigations of rake face temperature considering temperature-dependent thermal properties. Journal of Materials Processing Technology, 314 . ISSN 0924-0136 (Print) 1873-4774 (Online)

Papers in Conference Proceedings

Al-Nadhari, Abdulrahman Saeed Abdulqader and Şenol, Halil and Ulus, Hasan and Topal, Serra and Yıldız, Mehmet (2023) Acoustic emission analysis on mechanical properties and damage evolution of multiscale Kevlar/Glass hybrid 3D orthogonal woven composites under flexural loading. In: 7th International Conference of Engineering Against Failure (ICEAF) Conference, Spetses Island, Greece (Accepted)

Ebrahimi Araghizad, Arash and Tehranizadeh, Faraz and Kılıç, Kemal and Budak, Erhan (2023) Smart tool-related faults monitoring system using process simulation-based machine learning algorithms. In: XXXIV CIRP Sponsored Conference, Karpacz, Poland

Kienast, Pascal and Tunç, Lütfi Taner and Koca, Recep and Olgu, Ozan and Ganser, Philip and Bergs, Thomas (2023) Improving dynamic process stability in finishing of thin-walled workpieces by optimal selection of stock shape. In: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy

Topal, Serra and Beylergil, Bertan and Yıldırım, Ceren and Ünal, Serkan and Yıldız, Mehmet (2023) Advancing aircraft repair patch prepregs: enhancing composite performance through resin type, cure cycle, and nanomaterial innovations. In: 3rd Global Conference on Advanced Nanotechnology & Nanomaterials, Berlin, Germany

Volumes Edited / Special Issues

Urbikain, Gorka and Olvera-Trejo, Daniel and Budak, Erhan and Wan, Min (2023) Special issue on machining systems and signal processing: advancing machining processes through algorithms, sensors and devices. [Volumes Edited / Special Issues]

Thesis

Bagherzadeh, Amin (2023) Improving Process And Cooling/Lubrication Conditions Through Modeling And Experimental Investigation Of Deformation, Thermal, And Tribology Mechanisms In Hybrid Manufacturing Processes. [Thesis]

Kömürcü, Emre (2023) Mechanical Design And Laminate Optimization Of A Composite Suspension Control Arm With Experimental Validation. [Thesis]

Özer, Aybüke Büşra (2023) Development Of Flexible Sensors With Conjugated Polymers. [Thesis]

Sarghassabi, Mahzad (2023) Design Improvement Of Miniature Boring Tools Using Process Models. [Thesis]

Sheikhi, Mohammad (2023) Modeling and optimization in manufacturing variable stiffness composite structures. [Thesis]

Yıldız, Gülşah (2023) Construction of PCL/SF-based electrospun nanofibers for skin tissue engineering applications. [Thesis]

Yüksel, Esra (2023) Improving Machine Tool Design Trough Novel Analytical And Numeric Methods. [Thesis]