Items where Division is "Manufacturing Systems Eng." and Year is 2019

Group by: Creators | Item Type | No Grouping
Jump to: A | D | E | G | H | I | K | M | N | R | S | T | Z
Number of items: 30.

A

Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Seyyed Monfared Zanjani, Jamal and Yılmaz, Çağatay and Haghighi Poudeh, Leila and Yıldız, Mehmet (2019) Experimental study on dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors. Smart Materials and Structures, 28 (10). ISSN 0964-1726 (Print) 1361-665X (Online)

D

Daskalakis, Evangelos and Aslan, Enes and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bartolo, P. J. (2019) Composite scaffolds for large bone defects. In: 1st International Conference on Progress in Digital and Physical Manufacturing, ProDPM 2019, Leiria

Daskalakis, Evangelos and Liu, Fengyuan and Smith, Benedict and Acar, Anıl Ahmet and Aslan, Enes and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bártolo, Paulo Jorge (2019) Polymer-ceramic bone bricks for tissue engineering. In: AMMM - Additive Manufacturing Meets Medicine 2019, Lübeck, Germany

Demir, Eralp and Yousefi Louyeh, Pouya and Yıldız, Mehmet (2019) Design of variable stiffness composite structures using lamination parameters with fiber steering constraint. Composites Part B: Engineering, 165 . pp. 733-746. ISSN 1359-8368 (Print) 1879-1069 (Online)

E

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory. Composite Structures, 223 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Massarwa, Eyass and Seyyed Monfared Zanjani, Jamal and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2019) Determining tab material for tensile test of CFRP laminates with combined usage of digital image correlation and acoustic emission techniques. Composites Part A: Applied Science and Manufacturing, 127 . ISSN 1359-835X (Print) 1878-5840 (Online)

Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) Acoustic emission monitoring of glass/carbon hybrid fiber/epoxy composites under flexural and tensile loading conditions. In: 5th International Conference on Mechanics of Composites (MECHCOMP), Lisbon, Portugal

Emami Tabrizi, Isa and Zanjani, J. Seyyed Monfared and Yıldız, Mehmet (2019) Investigation of damage accumulation in glass/carbon fiber hybrid composites through acoustic emission method. In: 22nd International Conference on Composites Materials (ICCM22), Melbourne, Australia

Evren Han, Sanem and Ünel, Mustafa (2019) An acceleration-based hybrid learning-adaptive controller for robot manipulators. Transactions of the Institute of Measurement and Control (SI), 41 (8). pp. 2114-2123. ISSN 0142-3312 (Print) 1477-0369 (Online)

G

Gönül, Bora and Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2019) Improved stable conditions in robotic milling by kinematic redundancy. In: 17th CIRP Conference on Modelling of Machining Operations, Sheffield, UK

Gul, Saher (2019) Experimental and numerical investigation of mechanical effect of externally weak layers in thick hybrid composites. [Thesis]

H

Hafezi, Forough and Küçükgül, Can and Özler, Saime Burçe and Koç, Bahattin (2019) Bioprinting: application of additive manufacturing in medicine. In: Bandyopadhyay, Amit and Bose, Susmita, (eds.) Additive Manufacturing, Second Edition. CRC Press, Boca Raton, London, New York. ISBN 9781138609259

I

Işık, Murat and Kısa, Erdal and Koç, Bahattin and Yıldız, Mehmet and Pehlivanoğulları, Barış and Orhangül, Akın and Poyraz, Özgür and Akbulut, Güray (2019) Topology optimization and finite elemental analysis for an inconel 718 engine mounting bracket manufactured via electron beam melting. In: Additive Manufacturing Conference (AMCTURKEY), Istanbul, Turkey

K

Kefal, Adnan and Sohouli, Abdolrasoul and Öterkuş, Erkan and Yıldız, Mehmet and Suleman, Afzal (2019) Topology optimization of cracked structures using peridynamics. Continuum Mechanics and Thermodynamics (SI), 31 (6). pp. 1645-1672. ISSN 0935-1175 (Print) 1432-0959 (Online)

Koç, Bahattin and Acar, Anıl Ahmet and Weightman, Andrew and Cooper, Glen and Blunn, Gordon and Bartolo, Paulo (2019) Biomanufacturing of customized modular scaffolds for critical bone defects. CIRP Annals - Manufacturing Technology, 68 (1). pp. 209-212. ISSN 0007-8506 (Print) 1726-0604 (Online)

M

Mandal, Sefa Kemal (2019) Damage detection in carbon fiber reinforced polymeric composites and honeycomb sandwich panels by active thermography. [Thesis]

Mandal, Sefa Kemal and Zanjani, Jamal S. M. and Yıldız, Mehmet (2019) Damage detection in honeycomb sandwich panels by active thermography. In: 22nd International Conference on Composites Materials (ICCM22), Melbourne, Australia

N

Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Topuz, Fuat and Afghah, Seyedeh Ferdows and Erman, Batu and Koç, Bahattin (2019) Nanocomposite bioinks based on agarose and 2D nanosilicates with tunable flow properties and bioactivity for 3D bioprinting. ACS Applied Bio Materials, 2 (2). pp. 796-806. ISSN 2576-6422

Nadernezhad, Ali and Ünal, Serkan and Khani, Navid and Koç, Bahattin (2019) Material extrusion-based additive manufacturing of structurally controlled poly(lactic acid)/carbon nanotube nanocomposites. International Journal of Advanced Manufacturing Technology (SI), 102 (5-8). pp. 2119-2132. ISSN 0268-3768 (Print) 1433-3015 (Online)

R

Ramezanzadeh, Shayan and Özbulut, M. and Yıldız, Mehmet (2019) Simulation of irregular wave motion using a flap-type wavemaker. In: VIII. International Conference on Computational Methods in Marine Engineering (MARINE 2019), Gothenburg, Sweden

S

Saffarimiandoab, Farzin and Yavuztürk Gül, Bahar and Erkoç İlter, Selda and Güçlü, Serkan and Ünal, Serkan and Tunaboylu, Bahadır and Menceloğlu, Yusuf Z. and Koyuncu, İsmail (2019) Evaluation of biofouling behavior of zwitterionic silane coated reverse osmosis membranes fouled by marine bacteria. Progress in Organic Coatings, 134 . pp. 303-311. ISSN 0300-9440

Sapmaz, Ömer Faruk (2019) Kinematic analysis and optimization of robotic milling. [Thesis]

Seyyed Monfared Zanjani, Jamal and Oğuz, Oğuzhan and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2019) Polymer composites containing functionalized nanoparticles and the environment. In: Pielichowski, Krzysztof and Majka, Tomasz, (eds.) Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications. Elsevier, Amsterdam, pp. 437-466. ISBN 9780128140642 (Print) 9780128140659 (Online)

Shafighfard, Torkan and Demir, Eralp and Yıldız, Mehmet (2019) Design of fiber-reinforced variable-stiffness composites for different open-hole geometries with fiber continuity and curvature constraints. Composite Structures, 226 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Sohouli, Abdolrasoul and Kefal, Adnan and Yıldız, Mehmet and Suleman, Afzal (2019) Multi-material topology optimization of structures using peridynamics. In: 30th International Conference on Adaptive Structures and Technologies (ICAST2019), Montreal, Canada

T

Tofighi, Nima and Özbulut, Murat and Suleman, A. and Feng, J. J. and Yıldız, Mehmet (2019) Dielectrophoretic interaction of circular particles in a uniform electric field. European Journal of Mechanics - B/Fluids, 78 . pp. 194-202. ISSN 0997-7546 (Print) 1873-7390 (Online)

Tunç, Lütfi Taner (2019) Effect of MQL conditions on milling of AISI 316L type stainless steeels [AISI 316L tipi paslanmaz çeliklerin frezelemesinde MQL şartlarının takım ömrüne etkisi]. Journal of the Faculty of Engineering and Architecture of Gazi University, 34 (4). pp. 1665-1677. ISSN 1300-1884 (Print) 1304-4915 (Online)

Tunç, Lütfi Taner (2019) Smart tool path generation for 5-axis ball-end milling of sculptured surfaces using process models. Robotics and Computer Integrated Manufacturing, 56 . pp. 212-221. ISSN 0736-5845 (Print) 1879-2537 (Online)

Tunç, Lütfi Taner and Zatarain, Mikel (2019) Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts. CIRP Annals - Manufacturing Technology, 68 (1). pp. 401-404. ISSN 0007-8506 (Print) 1726-0604 (Online)

Z

Zaki, Hammad and Alcan, Gökhan and Ünel, Mustafa (2019) Robust trajectory control of an unmanned aerial vehicle using acceleration feedback. International Journal of Mechatronics and Manufacturing Systems, 12 (3-4). pp. 298-317. ISSN 1753-1039 (Print) 1753-1047 (Online)

This list was generated on Thu Mar 28 02:21:28 2024 +03.