Items where Division is "Mechatronics" and Year is 2023

Urbikain, Gorka and Olvera-Trejo, Daniel and Budak, Erhan and Wan, Min (2023) Special issue on machining systems and signal processing: advancing machining processes through algorithms, sensors and devices. [Volumes Edited / Special Issues]

Ahmad, Faseeh and Patoğlu, Volkan and Erdem, Esra (2023) Hybrid planning for challenging construction problems: an answer set programming approach. Artificial Intelligence, 319 . ISSN 0004-3702 (Print) 1872-7921 (Online)

Alipour Ghassabi, Ata and Kızıltaş, Güllü (2023) Microstructure effect on bone formation of a functionally graded scaffold using a mechanostat-based model. In: Tissue Engineering and Regenerative Medicine International Society (TERMIS), Krakow, Poland

Aslanimoghanloo, Muhammad (2023) Control-oriented, physics-inspired data-driven Modeling and simulation of the clinker production Pyro process. [Thesis]

Aydın, Mehmet Serhat and Şahin, Mervenaz and Doğan, Zeynep and Kızıltaş, Güllü (2023) Microstructural characterization of PCL-HA bone scaffolds based on nonsolvent-induced phase separation. ACS Omega, 8 (50). pp. 47595-47605. ISSN 2470-1343

Bahçeci, Beste and Erbatur, Kemalettin (2023) Balance and posture control of legged robots: a survey. Journal of Intelligent and Robotic Systems: Theory and Applications, 108 (2). ISSN 0921-0296 (Print) 1573-0409 (Online)

Bawo, Biram (2023) Optimizing The Output Energy Of A Vertical Axis Wind Turbine Using Deep Deterministic Policy Gradient And Proximal Policy Optimization. [Thesis]

Dadashi Farkhandi, Sahar (2023) Design Optimization For Minimizing The Production Cost Of Lithium Ion Batteries In Electrified Vehicles. [Thesis]

Dedeköy, Demir and Ciğeroğlu, Ender and Bediz, Bekir (2023) Nonlinear vibration analysis of uniform and functionally graded beams with spectral Chebyshev technique and harmonic balance method. In: 40th IMAC: A Conference and Exposition on Structural Dynamics, Orlando, FL, USA

Farrokhpour Sani, Saina (2023) Thermal Management of Tungsten by Spectrally Selective Thin Film Optical Filter under Laser Illumination. [Thesis]

Gül, Furkan (2023) A distance Transform-based loss Function for semantic Image segmentation With deep neural Networks. [Thesis]

Hashem, Nadeen Hossameldin Mohamed (2023) Robust Controller Design For A Fixed-Wing Uav Using Active Disturbance Cancellation. [Thesis]

İz, Selim Ahmet and Ünel, Mustafa (2023) Aerial image stitching using IMU data from a UAV. In: 8th International Conference on Image, Vision and Computing (ICIVC 2023), Dalian, China

İz, Selim Ahmet and Ünel, Mustafa (2023) Vision-based system identification of a quadrotor. In: 8th International Conference on Image, Vision and Computing (ICIVC 2023), Dalian, China

Malekabadi, Fatemeh (2023) Acoustic Radiation Forces And Torques On Elastic Micro Rings. [Thesis]

Malekabadi, Fatemeh and Caldag, Hakan Osman and Yeşilyurt, Serhat (2023) Acoustic radiation forces and torques on elastic micro rings in standing waves. Journal of Fluids and Structures, 118 . ISSN 0889-9746 (Print) 1095-8622 (Online)

Ozdemir, Mirhan and Simsek, Ugur and Kızıltaş, Güllü and Gayir, Cemal Efe and Celik, Alican and Sendur, Polat (2023) A novel design framework for generating functionally graded multi-morphology lattices via hybrid optimization and blending methods. Additive Manufacturing, 70 . ISSN 2214-8604

Öztürk, Sezen and Alipour Ghassabi, Ata and Kızıltaş, Güllü (2023) Effect of 3d scaffold morphology on bone tissue regeneration based on a multi-physics fem model. In: Tissue Engineering and Regenerative Medicine International Society (TERMIS), Krakow, Poland

Parlayan, Onur and Ozdemir, Mirhan and Gayir, Cemal Efe and Simsek, Ugur and Kızıltaş, Güllü (2023) A new sensitivity-based mapping scheme for topology optimization of graded TPMS designs. International Journal of Advanced Manufacturing Technology, 129 . pp. 3197-3220. ISSN 0268-3768 (Print) 1433-3015 (Online)

Pehlivan, Ahmet Selim (2023) A novel fuzzy logic pitch angle controller with genetic algorithm optimization for wind turbines. [Thesis]

Pirouzfam, Niloufar (2023) Spectrally selective filters with rough surfaces and multilayer coatings. [Thesis]

Pirouzfam, Niloufar and Şendur, Kürşat (2023) A bowtie antenna plasmonic metamaterial emitter for high-performance radiative cooling. In: Metamaterials XIV, Prague, Czech Republic

Rafiei Anamagh, Mirmeysam and Gokalp, Kaya and Akyıldız, Taha Atahan and Alan, Salih and Kaya, Kamer and Bediz, Bekir (2023) A hybrid CPU–GPU solver based on three-dimensional spectral Chebyshev technique for determining the dynamic behavior of thick sandwich panels. Engineering Analysis with Boundary Elements, 147 . pp. 181-194. ISSN 0955-7997 (Print) 1873-197X (Online)

Saeidfar, Asal (2023) Investigating the performance and degradation of low Platinum loaded proton exchange membrane fuel cells. [Thesis]

Saghatchi, Roozbeh and Yıldız, Mehmet (2023) Vibration induced by active nematics. Journal of Fluid Mechanics, 954 . ISSN 0022-1120 (Print) 1469-7645 (Online)

Schmitz, Tony and Betters, Emma and Budak, Erhan and Yüksel, Esra and Park, Simon and Altıntaş, Yusuf (2023) Review and status of tool tip frequency response function prediction using receptance coupling. Precision Engineering, 79 . pp. 60-77. ISSN 0141-6359 (Print) 1873-2372 (Online)

Sharbati, Pouya (2023) On the effect of static and dynamic contact angles on condensation heat transfer. [Thesis]

Shekhar, Shivang and Bediz, Bekir and Özdoğanlar, O. Burak (2023) Tool-tip dynamics in micromachining with arbitrary tool geometries and the effect of spindle speed. International Journal of Machine Tools and Manufacture, 185 . ISSN 0890-6955 (Print) 1879-2170 (Online)

Shojaeian, Milad and Caldag, Hakan Osman and Bozkurt, Ayhan and Yeşilyurt, Serhat (2023) Fabrication of magnetic helical microribbons made of nickel thin films sandwiched between silicon nitride layers for microswimming applications. Nanotechnology, 34 (1). ISSN 0957-4484 (Print) 1361-6528 (Online)

Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü and Alipour Ghassabi, Ata (2023) Mesenchymal stem cell diffusion integrated mechano- biology analysis of 3d scaffolds. In: Tissue Engineering and Regenerative Medicine International Society (TERMIS), Krakow, Poland

Şuyun, Ahmet Can (2023) Design Of Passive Radiative Surfaces For Energy-Efficient Base Station Cooling. [Thesis]

Şükür, Emine Feyza and Elmas, Sinem Gül and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) An experimental implication of long-term hot-wet-aged carbon fiber/polyether ketone ketone composites: the impact of automated fiber placement process parameters and process-induced defects. Journal of Applied Polymer Science, 140 (29). ISSN 0021-8995 (Print) 1097-4628 (Online)

Tavakol Aghaei, Vahid and Ağababaoğlu, Arda and Bawo, Biram and Naseradinmousavi, Peiman and Yıldırım, Sinan and Yeşilyurt, Serhat and Onat, Ahmet (2023) Energy optimization of wind turbines via a neural control policy based on reinforcement learning Markov chain Monte Carlo algorithm. Applied Energy, 341 . ISSN 0306-2619