Items where Division is "Industrial Engineering" and Year is 2016

Article

Aksu, Burak and Çelebi, Ceren and Budak, Erhan (2016) An experimental investigation of oblique cutting mechanics. Machining Science and Technology, 20 (3). pp. 495-521. ISSN 1091-0344 (Print) 1532-2483 (Online)

Budak, Erhan and Özlü, Emre and Bakioğlu, Hayri and Barzegar Osgouei, Zahra (2016) Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces. CIRP Annals - Manufacturing Technology, 65 (1). pp. 121-124. ISSN 0007-8506 (Print) 1726-0604 (Online)

Carlier, Aurelli and Akdeniz Skvortsov, Gözde and Hafezi, Forough and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin and Oosterwyck, Hans Van (2016) Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering. Biofabrication, 8 (2). ISSN 1758-5082 (Print) 1758-5090 (Online)

Daldal, Rebi and Gamzu, Iftah and Segev, Danny and Ünlüyurt, Tonguç (2016) Approximation algorithms for sequential batch-testing of series systems. Naval Research Logistics, 63 (4). pp. 275-286. ISSN 0894-069X (Print) 1520_6750 (Online)

Davari, Soheil and Kılıç, Kemal and Naderi Varandi, Siamak (2016) A heuristic approach to solve the preventive health care problem with budget and congestion constraints. Applied Mathematics and Computation, 276 . pp. 442-453. ISSN 0096-3003 (Print) 1873-5649 (Online)

Demir, Eralp (2016) 3D suspension characterization of a rapid transit vehicle using a multi-body dynamic model. Urban Rail Transit, 2 (3-4). pp. 172-187. ISSN 2199-6687 (Print) 2199-6679 (Online)

Emeç, Uğur and Çatay, Bülent and Bozkaya, Burçin (2016) An adaptive large neighborhood search for an e-grocery delivery routing problem. Computers and Operations Research, 69 . pp. 109-125. ISSN 0305-0548 (Print) 1873-765X (Online)

Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2016) Determining collusion opportunities in deregulated electricity markets. Electric Power Systems Research, 141 . pp. 432-441. ISSN 0378-7796 (Print) 1873-2046 (Online)

Kahvecioğlu, Gökçe and Balcıoğlu, Ahmet Barış (2016) Coping with production time variability via dynamic lead-time quotation. OR Spectrum, 38 (4). pp. 877-898. ISSN 0171-6468 (Print) 1436-6304 (Online)

Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2016) Effects of tool axis offset in turn-milling process. Journal of Materials Processing Technology, 231 . pp. 239-247. ISSN 0924-0136

Keskin, Merve and Çatay, Bülent (2016) Partial recharge strategies for the electric vehicle routing problem with time windows. Transportation Research Part C: Emerging Technologies, 65 . pp. 111-127. ISSN 0968-090X

Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study. Materials & Design, 109 . pp. 123-132. ISSN 0264-1275 (Print) 1873-4197 (Online)

Küçükyavuz, Simge and Noyan, Nilay (2016) Cut generation for optimization problems with multivariate risk constraints. Mathematical Programming, 159 (1). pp. 165-199. ISSN 0025-5610 (Print) 1436-4646 (Online)

Munoa, J. and Beudaert, X. and Dombovari, Z. and Altıntaş, Y. and Budak, Erhan and Brecher, C. and Stepan, G. (2016) Chatter suppression techniques in metal cutting. CIRP Annals - Manufacturing Technology, 65 (2). pp. 785-808. ISSN 0007-8506 (Print) 1726-0604 (Online)

Nadernezhad, Ali and Khani, Navid and Akdeniz Skvortsov, Gözde and Toprakhisar, Burak and Bakırcı, Ezgi and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koç, Bahattin (2016) Multifunctional 3D printing of heterogeneous hydrogel structures. Scientific Reports, 6 . ISSN 2045-2322

Noyan, Nilay and Balçık, Burcu and Atakan, Semih (2016) A stochastic optimization model for designing last mile relief networks. Transportation Science, 50 (3). pp. 1092-1113. ISSN 0041-1655 (Print) 1526-5447 (Online)

Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) Generalized model for dynamics and stability of multi-axis milling with complex tool geometries. Journal of Materials Processing Technology, 238 . pp. 446-458. ISSN 0924-0136 (Print) 1873-4774 (Online)

Özler, Saime Burçe and Bakırcı, Ezgi and Küçükgül, Can and Koç, Bahattin (2016) Three-dimensional direct cell bioprinting for tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials . ISSN 1552-4973 (Print) 1552-4981 (Online) Published Online First http://dx.doi.org/10.1002/jbm.b.33768

Tunç, Lütfi Taner and Budak, Erhan and Bilgen, Samet and Zatarain, Mikel (2016) Process simulation integrated tool axis selection for 5-axis tool path generation. CIRP Annals - Manufacturing Technology, 65 (1). pp. 381-384. ISSN 0007-8506 (Print) 1726-0604 (Online)

Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Budak, Erhan (2016) Machining strategy development and parameter selection in 5-axis milling based on process simulations. International Journal of Advanced Manufacturing Technology, 85 (5-8). pp. 1483-1500. ISSN 0268-3768 (Print) 1433-3015 (Online)

Türker, Uraz Cengiz and Ünlüyurt, Tonguç and Yenigün, Hüsnü (2016) Effective algorithms for constructing minimum cost adaptive distinguishing sequences. Information and Software Technology, 74 . pp. 69-85. ISSN 0950-5849 (Print) 1873-6025 (Online)

Ünlüyurt, Tonguç and Tunçer, Yasir (2016) Estimating the performance of emergency medical service location models via discrete event simulation. Computers & Industrial Engineering, 102 . pp. 467-475. ISSN 0360-8352 (Print) 1879-0550 (Online)

Papers in Conference Proceedings

Ahmed, Faran and Kılıç, Kemal (2016) Comparison of fuzzy extent analysis technique and its extensions with original eigen vector approach. In: 18th International Conference on Enterprise Information Systems (ICEIS 2016), Rome, Italy

Ahmed, Faran and Kılıç, Kemal (2016) Fuzzy extent analysis: comparison of defuzzification methods. In: 6th International Conference on Industrial Engineering and Operations Management (IEOM 2016), Kuala Lumpur, Malaysia

Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and İnce, Gözde and Koç, Bahattin (2016) Cell sheet as a bioink for 3D bioprinting. In: Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden

Budak, Erhan (2016) Improving productivity in machining processes through modeling. In: 3. Wiener Produktionstechnik Kongress 2016 Adaptive & Smart Manufacturing, Vienna, Austria

Erdil, Ertunç and Yıldırım, Sinan and Çetin, Müjdat and Taşdizen, Tolga (2016) MCMC shape sampling for image segmentation with nonparametric shape priors. In: 29th IEEE Conference on Computer Vision and Pattern Recognition Workshops (CVPRW), Las Vegas, Nevada, USA

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2016) Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi. In: 7. Uluslararası Talaşlı İmalat Sempozyumu (UTİS 2016), Istanbul

Naderi Varandi, Siamak and Kılıç, Kemal (2016) A decision support system for staff workload balancing. In: 12th International Conference on Application of Fuzzy Systems and Soft Computing (ICAFS 2016), Vienna, Austria (Accepted)

Naderi Varandi, Siamak and Kılıç, Kemal (2016) Fuzzy zoning: a lagrangean relaxation approach. In: IEEE International Conference on Systems, Man, and Cybernetics, Budapest, Hungary (Accepted)

Sevinç, Mete and Ulusoy, Gündüz (2016) Innovation clusters and determinants of innovativeness in manufacturing industries. In: 6th International Conference on Industrial Engineering and Operations Management (IEOM 2016), Kuala Lumpur, Malaysia

Toprakhisar, Burak and Bakırcı, Ezgi and Koç, Bahattin (2016) 3D bioprinting stem-cells with solubilized tendon extracellular matrix (ECM) based hydrogel. In: Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden

Yastıkcı, Batuhan and Jamshidi, Hamid and Budak, Erhan (2016) Experimental investigation of wear mechanisms with electroplated CBN wheel. In: 19th International Symposium on Advances in Abrasive Technology, Stockholm, Sweden

Volumes Edited / Special Issues

Birbil, Ş. İlker and Liao, L.-Z. and Muramatsu, Masakazu (2016) Words from the guest editors (Pacific Journal of Optimization - Special Issue of The First Pacific Optimization Conference (POC2014)). [Volumes Edited / Special Issues]

Thesis

Akbay, Ümmühan (2016) Behavioral experiments on supply chain contracting. [Thesis]

Albayrak, Mehmet (2016) Investigation of machine tool rigidity through measurements and FEA. [Thesis]

Bilgen, Samet (2016) Modelling and optimization of multi-axis machining process considering CNC motion limitations. [Thesis]

Elçi, Özgün (2016) Chance-constrained stochastic programming models for humanitarian relief network design. [Thesis]

Emami Gohari, Amir (2016) Parallel implementations for solving matrix factorization problems with optimization. [Thesis]

Esmaeili Aliabadi, Danial (2016) Analysis of collusion and competition in electricity markets using an agent-based approach. [Thesis]

Hassani, Milad (2016) Predicting drug synergy using data mining. [Thesis]

Imanlou, Bahar (2016) A topology optimized model based on the level-set method for porous bone scaffolds. [Thesis]

Yalçın, Turgut Köksal (2016) Thermal modelling of high speed machine tool spindles. [Thesis]

Yastıkcı, Batuhan (2016) Investigation of tool wear in grinding processes. [Thesis]