Items where Author is "Rahimzadeh Berenji, Kaveh"

Group by: Item Type | No Grouping
Number of items: 12.

Rahimzadeh Berenji, Kaveh and Budak, Erhan (2023) A general model for uncut chip geometry, process kinematics, and mechanics of orthogonal turn-milling process. CIRP Journal of Manufacturing Science and Technology, 43 . pp. 57-70. ISSN 1755-5817

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yıldız, Saltuk and Budak, Erhan (2022) Chatter stability of thin-walled part machining using special end mills. CIRP Annals, 71 (1). pp. 365-368. ISSN 0007-8506 (Print) 1726-0604 (Online)

Rahimzadeh Berenji, Kaveh and Budak, Erhan (2022) Improved machining performance through turn-milling. Journal of Machine Engineering, 22 (2). pp. 5-17. ISSN 1895-7595 (Print) 2391-8071 (Online)

Rahimzadeh Berenji, Kaveh (2022) Mechanics, dynamics, and stability of orthogonal turn-milling operation. [Thesis]

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan (2021) Dalgalı talaş yüzeyli takımların kararlılık analizi ve takım optimizasyonu [Stability analysis of crest-cut end mills and the optimization of tool geometry]. In: 11th International Congress on Machining (UTIS), Virtual

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan (2021) Dynamics and chatter stability of crest-cut end mills. International Journal of Machine Tools and Manufacture, 171 . ISSN 0890-6955 (Print) 1879-2170 (Online)

Yıldız, Saltuk and Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yavaş, Çağlar and Kurt, Seçil and Budak, Erhan (2021) Evaluation of carbide end mills with different cutting geometries in machining of a titanium alloy. In: 11th International Congress on Machining (UTIS), Virtual

Rahimzadeh Berenji, Kaveh and Ozsahin, Orkun and Budak, Erhan (2021) Effect of spindle design on spindle dynamics and chatter stability. In: International Symposium on Precision Engineering and Sustainable Manufacturing PRESM2021, Jeju, South Korea

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2019) Effects of turn-milling conditions on chip formation and surface finish. CIRP Annals - Manufacturing Technology, 68 (1). pp. 113-116. ISSN 0007-8506 (Print) 1726-0604 (Online)

Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan (2018) An experimental study on surface errors in orthogonal turn-milling process. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Rahimzadeh Berenji, Kaveh and Kara, Mehmet Emre and Budak, Erhan (2018) Investigating high productivity conditions for turn-milling in comparison to conventional turning. In: 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2017) Development of turn-milling machine tool program parameters based on basic cutting geometry. In: 8th International Symposium on Machining, Antalya, Turkey

This list was generated on Fri Mar 29 08:45:12 2024 +03.