Items where Author is "Motezakker, Ahmad Reza"

Group by: Item Type | No Grouping
Number of items: 12.

Article

Ghorbani, Morteza and Deprem, Gökberk and Özdemir, Ece and Motezakker, Ahmad Reza and Villanueva, L. G. and Koşar, Ali (2019) On "cavitation on chip" in microfluidic devices with surface and sidewall roughness elements. Journal of Microelectromechanical Systems . ISSN 1057-7157 (Print) 1941-0158 (Online) Published Online First http://dx.doi.org/10.1109/JMEMS.2019.2925541

Karimzadehkhouei, Mehrdad and Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Akgönül, Sarp and Özbey, Arzu and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2019) Experimental and numerical investigation of inlet temperature effect on convective heat transfer of gamma-Al2O3/water nanofluid flows in microtubes. Heat Transfer Engineering, 40 (9-10). pp. 738-752. ISSN 0145-7632 (Print) 1521-0537 (Online)

Motezakker, Ahmad Reza and Khalili Sadaghiani, Abdolali and Çelik, Süleyman and Larsen, Tom and Villanueva, Luis Guillermo and Koşar, Ali (2019) Optimum ratio of hydrophobic to hydrophilic areas of biphilic surfaces in thermal fluid systems involving boiling. International Journal of Heat and Mass Transfer, 135 . pp. 164-174. ISSN 0017-9310 (Print) 1879-2189 (Online)

Özdemir, Mehmed Rafet and Sadaghiani, Abdolali Khalili and Motezakker, Ahmad Reza and Parapari, Sorour Semsari and Park, Hyun Sun and Acar, Havva Yağcı and Koşar, Ali (2018) Experimental studies on ferrofluid pool boiling in the presence of external magnetic force. Applied Thermal Engineering, 139 . pp. 598-608. ISSN 1359-4311 (Print) 1873-5606 (Online)

Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Kasap, Sibel and Kaya, İsmet İnönü and Koşar, Ali (2018) Foamlike 3D graphene coatings for cooling systems involving phase change. ACS Omega, 3 (3). pp. 2804-2811. ISSN 2470-1343

Motezakker, Ahmad Reza and Khalili Sadaghiani, Abdolali and Akkoç, Yunus and Semsari Parapari, Sorour and Gözüaçık, Devrim and Koşar, Ali (2017) Surface modifications for phase change cooling applications via crenarchaeon Sulfolobus solfataricus P2 bio-coatings. Scientific Reports, 7 . ISSN 2045-2322

Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Özpınar, Alsan Volkan and Özaydın İnce, Gözde and Koşar, Ali (2017) Pool boiling heat transfer characteristics of inclined pHEMA-coated surfaces. Journal of Heat Transfer (SI), 139 (11). ISSN 0022-1481 (Print) 1528-8943 (Online)

Ghorbani, Morteza and Mohammadi, Ali and Motezakker, Ahmad Reza and Villanueva, Luis Guillermo and Leblebici, Yusuf and Koşar, Ali (2017) Energy harvesting in microscale with cavitating flows. ACS Omega, 2 (10). pp. 6870-6877. ISSN 2470-1343

Nedaei, Masoumeh and Motezakker, Ahmad Reza and Zeybek, Mehmet Can and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali (2017) Subcooled flow boiling heat transfer enhancement using polyperfluorodecylacrylate (pPFDA) coated microtubes with different coating thicknesses. Experimental Thermal and Fluid Science, 86 . pp. 130-140. ISSN 0894-1777 (Print) 1879-2286 (Online)

Papers in Conference Proceedings

Özdemir, Ece and Özer, Berk and Deprem, Gökberk and Motezakker, Ahmad Reza and Villanueva, Luis Guillermo and Ghorbani, Morteza and Koşar, Ali (2018) Hysteresis in cavitating flows within transparent microchips. In: Cav2018, USA (Accepted)

Sadaghiani, Abdolali Khalili and Motezakker, Ahmad Reza and Koşar, Ali (2017) Experimental studies on steam condensation in horizontal and vertical microtubes. In: 13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2017), Portoroz, Slovenia

Thesis

Motezakker, Ahmad Reza (2018) Phase change heat transfer on micro/nano structured enhanced surfaces. [Thesis]

This list was generated on Fri Dec 9 09:10:21 2022 +03.