Development and mechanical modeling of Si1-XGex/Si MQW based uncooled microbolometers in a 130 nm BiCMOS

Baristiran-Kaynak, Canan and Göritz, A. and Yamamoto, Y. and Wietstruck, M. and Stocchi, M. and Ünal, Kadir Eren and Özdemir, Mehmet Bora and Özsoy, Yusuf and Gürbüz, Yaşar and Kaynak, Mehmet (2019) Development and mechanical modeling of Si1-XGex/Si MQW based uncooled microbolometers in a 130 nm BiCMOS. In: 19th IEEE Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems (SiRF), Orlando, FL

[thumbnail of Development_and_Mechanical_Modeling_of_Si1-XGex-Si_MQW_Based_Uncooled_Microbolometers_in_a_130_nm_BiCMOS.pdf] PDF
Development_and_Mechanical_Modeling_of_Si1-XGex-Si_MQW_Based_Uncooled_Microbolometers_in_a_130_nm_BiCMOS.pdf

Download (337kB)

Abstract

This paper presents the development of process integration and mechanical modeling of a Si1-xGex/Si MQW based uncooled micro-bolometer. The recent progress on layer transfer based integration scheme of Si1-xGex/Si based micro-bolometer into a 130 nm BiCMOS process is presented. The two important parts of the process integration, namely the layer-transfer and stress compensation of the arms are studied. The initial successful results on layer transfer and the FEM modeling for the stress compensation of the thin and narrow arms of the bolometer is presented. Finally, the developed FEM model is compared with the fabricated cantilevers. The results show that the developed FEM model has a very good matching with the experimental results; thus very convenient to use for the FEM modeling of the full bolometer structure.
Item Type: Papers in Conference Proceedings
Uncontrolled Keywords: FEM modeling; thermistor; micro-bolometer; residual stress; Si/SiGe MQWs
Divisions: Faculty of Engineering and Natural Sciences > Academic programs > Electronics
Faculty of Engineering and Natural Sciences
Depositing User: Yaşar Gürbüz
Date Deposited: 27 Aug 2019 10:09
Last Modified: 26 Apr 2022 09:32
URI: https://research.sabanciuniv.edu/id/eprint/37953

Actions (login required)

View Item
View Item