A novel approach to noise shaping in digital pixels for infrared imagers using over-integration

Warning The system is temporarily closed to updates for reporting purpose.

Abbasi, Shahbaz and Shafique, Atia and Ceylan, Ömer and Yazıcı, Melik and Gürbüz, Yaşar (2018) A novel approach to noise shaping in digital pixels for infrared imagers using over-integration. In: IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy

PDF - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader

Official URL: http://dx.doi.org/10.1109/ISCAS.2018.8351351


Digital readout integrated circuits (DROICs) for small pitch infrared focal plane arrays (IR-FPAs) suffer from low in-pixel resolution owing to the limited pixel real estate. To this end, a new technique to improve the resolution of pulse frequency modulation (PFM) based pixels, using quantization charge noise shaping, is presented. Multiple integration operations are performed in a single frame and the quantization error from each integration phase is retained and effectively induced into the next integration phase. The result is a high pass noise transfer function (NTF) equivalent to what is obtained in a first order sigma delta modulator. Along with a theoretical analysis of the technique, a prototype based on a single pixel and a 2nd order decimation filter is developed to demonstrate the performance of the proposed technique. With an in-pixel circuitry generating 5 bits, a resolution of 11 bits (65 dB) is achieved with an over-integration ratio of 64. With a 100 Hz frame rate and 64 integration operations per frame, a readout noise of 1100e- is measured at full-well fill from the test pixel fabricated in a 90nm CMOS process.

Item Type:Papers in Conference Proceedings
ID Code:36419
Deposited By:Yaşar Gürbüz
Deposited On:09 Sep 2018 14:21
Last Modified:09 Sep 2018 14:21

Repository Staff Only: item control page