Cutting load capacity of end mills with complex geometry

Nemes, J. A. and Asamoah-Attiah, S. and Budak, Erhan (2001) Cutting load capacity of end mills with complex geometry. CIRP Annals - Manufacturing Technology, 50 (1). pp. 65-68. ISSN 0007-8506

PDF (This is a RoMEO green journal -- author can archive pre-print (ie pre-refereeing) and post-print (ie final draft post-refereeing)) - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader

Official URL: http://dx.doi.org/10.1016/S0007-8506(07)62072-1


Cutting load capacity of cemented carbide end mills with high length-to-diameter ratios is determined from critical geometric and loading parameters, including a stress concentration factor (SCF) to account for serrated edges, which is determined by finite element analysis. Tensile strengths are characterised using a statistical Weibull analysis from 4-point bend tests of cemented carbide blanks of two different diameters. The approach is used to predict probability of survival for cutters under different loading conditions. Results are compared to measured failure cutting loads under service conditions as well as to those measured in static three point bend tests.

Item Type:Article
Uncontrolled Keywords:milling; cutter; failure
Subjects:T Technology > TJ Mechanical engineering and machinery
ID Code:231
Deposited By:Erhan Budak
Deposited On:17 Feb 2007 02:00
Last Modified:17 Sep 2019 14:03

Repository Staff Only: item control page