title   
  

Development of turn-milling machine tool program parameters based on basic cutting geometry

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2017) Development of turn-milling machine tool program parameters based on basic cutting geometry. In: 8th International Symposium on Machining, Antalya, Turkey

[img]PDF - Repository staff only - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader
552Kb

Official URL: https://docs.wixstatic.com/ugd/100696_a7bad0021ae14d61b64f60d4f811b6ae.pdf

Abstract

The turn-milling operation is a multitasking machining process that takes advantages of turning and milling operations simultaneously. However, using these two machining operations at the same time results in more complex and different cutting parameters compared to conventional turning process. In this study, the turn-milling kinematics have been modeled analytically. Using the model proposed in this study, the required parameters for a machine tool such as feed rate, workpiece, and tool rotational speed can be derived in terms of basic cutting parameters which are cutting speed, feed per tooth, radial depth of cut, and axial depth of cut.

Item Type:Papers in Conference Proceedings
Subjects:T Technology > TJ Mechanical engineering and machinery
T Technology > TJ Mechanical engineering and machinery > TJ241-254.7 Machine construction (General)
T Technology > TJ Mechanical engineering and machinery > TJ170-179 Mechanics applied to machinery. Dynamics
ID Code:35941
Deposited By:Erhan Budak
Deposited On:13 Aug 2018 11:22
Last Modified:13 Aug 2018 11:22

Repository Staff Only: item control page