Items where Division is "Manufacturing Systems Eng." and Year is 2020

Article

Afghah, Seyedeh Ferdows and Altunbek, Mine and Dikyol, Caner and Koç, Bahattin (2020) Preparation and characterization of nanoclay-hydrogel composite support-bath for bioprinting of complex structures. Scientific Reports, 10 (1). ISSN 2045-2322

Afghah, Seyedeh Ferdows and Ullah, Mohib and Zanjani, Jamal Seyyed Monfared and Süt, Pınar Akkuş and Şen, Özlem and Emanet, Melis and Saner Okan, Burcu and Çulha, Mustafa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Koç, Bahattin (2020) 3D printing of silver-doped polycaprolactone-poly(propylene succinate) composite scaffolds for skin tissue engineering. Biomedical Materials, 15 (3). ISSN 1748-6041 (Print) 1748-605X (Online)

Bayat, Golchehreh and Saghatchi, Roozbeh and Azamat, Jafar and Khataee, Alireza (2020) Separation of methane from different gas mixtures using modified silicon carbide nanosheet: micro and macro scale numerical studies. Chinese Journal of Chemical Engineering, 28 (5). pp. 1268-1276. ISSN 1004-9541 (Print) 2210-321X (Online)

Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin (2020) Realtime localization and estimation of loads on aircraft wings from depth images. Sensors, 20 (12). ISSN 1424-8220

Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Yıldız, Mehmet (2020) An experimental study on tensile and bending properties of biaxial warp knitted textile composites. Advanced Composite Materials, 29 (1). pp. 73-88. ISSN 0924-3046 (Print) 1568-5519 (Online)

El Khaldi, Raed M. and Paşaoğlu, Mehmet E. and Menceloğlu, Yusuf Z. and Özdoğan, Reyhan and Çelebi, Mithat and Kaya, Mehmet A. and Koyuncu, İsmail (2020) Application of high performance fo nanofibers based membrane for model and real seawater desalination. Desalination and Water Treatment, 205 . pp. 53-62. ISSN 1944-3994 (Print) 1944-3986 (Online)

Khan, Raja Muhammad Awais and Emami Tabrizi, Isa and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2020) Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites. Polymer Testing, 90 . ISSN 0142-9418 (Print) 1873-2348 (Online)

Kolukısa, Deniz Can and Özbulut, Murat and Peşman, Emre and Yıldız, Mehmet (2020) Development of computationally efficient augmented Lagrangian SPH for incompressible flows and its quantitative comparison with WCSPH simulating flow past a circular cylinder. International Journal for Numerical Methods in Engineering, 121 (18). pp. 4187-4207. ISSN 0029-5981 (Print) 1097-0207 (Online)

Özbulut, Murat and Ramezanzadeh, Shayan and Yıldız, Mehmet and Gören, Ömer (2020) Modelling of wave generation in a numerical tank by SPH method. Journal of Ocean Engineering and Marine Energy, 6 (2). pp. 121-136. ISSN 2198-6444 (Print) 2198-6452 (Online)

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes. International Journal of Mechanical Sciences, 182 . ISSN 0020-7403 (Print) 1879-2162 (Online)

Saghatchi, Roozbeh and Rahmat, Amin and Yıldız, Mehmet (2020) Electrohydrodynamics of a droplet in a highly confined domain: a numerical study. Physics of Fluids, 32 (12). ISSN 1070-6631 (Print) 1089-7666 (Online)

Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Girginer Özünlü, Burcu and Yağcı, Yavuz Emre and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) Development of waste tire-derived graphene reinforced polypropylene nanocomposites with controlled polymer grade, crystallization and mechanical characteristics via melt-mixing. Polymer International, 69 (9). pp. 771-779. ISSN 0959-8103 (Print) 1097-0126 (Onlilne)

Sohouli, Abdol Rasoul and Kefal, Adnan and Abdelhamid, Ahmed and Yıldız, Mehmet and Suleman, Afzal (2020) Continuous density-based topology optimization of cracked structures using peridynamics. Structural and Multidisciplinary Optimization, 62 (5). pp. 2375-2389. ISSN 1615-147X (Print) 1615-1488 (Online)

Sümer, Yavuz and Bediz, Bekir (2020) Çok fonksiyonlu paralel geçit merdiveni tasarımı, analizi ve üretimi. Makina Tasarım ve İmalat Dergisi, 18 (2). pp. 92-105. ISSN 1302-9487 (Print) 2667-4297 (Online)

Yılmaz, Çağatay and Topal, Serra and Ali, Hafiz Qasim and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Suleman, Afzal and Yıldız, Mehmet (2020) Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave. Composite Structures, 237 . ISSN 0263-8223 (Print) 1879-1085 (Online)

Papers in Conference Proceedings

Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Seyyed Monfared Zanjani, Jamal and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) New hybrid nano additives for thermoplastic compounding: CVD grown carbon fiber on graphene. In: 35th International Conference of the Polymer Processing Society (PPS), Izmir, Turkey

Daskalakis, Evangelos and Liu, Fengyuan and Acar, Anıl Ahmet and Dinea, Edera-Elena and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bártolo, Paulo Jorge (2020) 3D-printed composite bone bricks for large bone tissue applications. In: 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), Thessaloniki, Greece

Fernandes, Mariana and Sohouli, Abdolrasoul and Yıldız, Mehmet and Suleman, Afzal (2020) Path planning and fiber angle optimization of continuous fiber composites for additive manufacturing. In: Joint Event: 23rd International Conference on Composite Structures (ICCS23) & 6th International Conference on Mechanics of Composites (MECHCOMP6), Portugal

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2020) Numerical investigation on effective toughening mechanisms of graded composites. In: Joint Event: ICCS23 - 23rd International Conference on Composite Structures & MECHCOMP6 - 6th International Conference on Mechanics of Composites, Porto, Portugal

Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Ozunlu, Burcu Girginer and Yağcı, Yavuz Emre (2020) Graphene from waste tire by recycling technique for cost-effective and light-weight automotive plastic part production. In: 35th International Conference of the Polymer Processing Society (PPS 2019), Izmir, Turkey

Shokirov, Nozir and Çatay, Bülent and Ünlüyurt, Tonguç (2020) Crew constrained home health care routing problem with time windows and synchronized visits. In: Global Joint Conference on Industrial Engineering and Its Application Areas (GJCIE 2019), Gazimagusa, North Cyprus

Book Section / Chapter

Daskalakis, Evangelos and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon (2020) Bioglasses for bone tissue engineering. In: Bártolo, Jorge and Bidanda, Bopaya, (eds.) Bio-Materials and Prototyping Applications in Medicine. Springer International Publishing, Switzerland, pp. 165-193. ISBN 978-3-030-35875-4 (Print) 978-3-030-35876-1 (Online)

Seyyed Monfared Zanjani, Jamal and Beylergil, Bertan and Haghighi Poudeh, Leila and Alkhateab, Baidaa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2020) Effect of nanomaterials/nanofibers on the structure and properties of fiber-reinforced composites. In: Han, Baoguo and Sharma, Sumit and Nguyen, Tuan Anh and Longbiao, Li and Bhat, K. Subrahmanya, (eds.) Fiber-Reinforced Nanocomposites: Fundamentals and Applications. Elsevier, Amsterdam, pp. 157-182. ISBN 9780128199107 (Print) 9780128199046 (Online)

Thesis

Acar, Anıl Ahmet (2020) Designing and additive manufacturing of customizable, modular scaffold blocks for large bone defects. [Thesis]

Arıkan, Muhammed Hasan (2020) An integrated and systematic characterization methodology for vacumm bag only prepregs. [Thesis]

Eroğlu, Fatih (2020) Multiphysical modeling and optimization of vacuum bag only process with integration of resin flow, heat transfer and consolidation for composite manufacturing design. [Thesis]

Gönül, Bora (2020) Continuously Variable Posture Selection in Robotic Milling for Increased Chatter Stability. [Thesis]

Seyednourani, Mahsa (2020) A robust process model with two-stage optimization methodology for liquid composite molding process. [Thesis]

Shafighfard, Torkan (2020) Numerical and experimental investigation of fiber-reinforced constant and variable stiffness composites for open hole tension with fiber continuity and curvature constraints. [Thesis]

Uzun, Fatih (2020) Multidisciplinary investigation of C-Type composite sandwich radome panels within the scope of acoustic emission based damage characterization and electromagnetic transmission performance. [Thesis]

Ünal, Deha (2020) Development of IN-SITU thermal monitoring system for selective laser sintering to evaluate nesting design. [Thesis]