Items where Division is "Manufacturing Systems Eng." and Year is 2018

Article

Demir, Eralp and Mercan, Safiye Canset (2018) A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response. International Journal of Machine Tools and Manufacture, 134 . pp. 25-41. ISSN 0890-6955 (Print) 1879-2170 (Online)

Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying. ACS Omega, 3 (6). pp. 6400-6410. ISSN 2470-1343

Jahangiri, Sassan and Aravi, İpek and Işıkel Şanlı, Lale and Menceloğlu, Yusuf Z. and Özden Yenigün, Elif (2018) Fabrication and optimization of proton conductive polybenzimidazole electrospun nanofiber membranes. Polymers for Advanced Technologies, 29 (1). pp. 594-602. ISSN 1042-7147 (Print) 1099-1581 (Online)

Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology. Ocean Engineering, 147 . pp. 256-267. ISSN 0029-8018

Öztoprak, Figen and Birbil, Ş. İlker (2018) An alternative globalization strategy for unconstrained optimization. Optimization, 67 (3). pp. 377-392. ISSN 0233-1934 (Print) 1029-4945 (Online)

Rahmat, Amin and Yıldız, Mehmet (2018) A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence. International Journal of Multiphase Flow, 105 . pp. 32-44. ISSN 0301-9322 (Print) 1879-3533 (Online)

Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors. Thin-Walled Structures, 130 . pp. 458-466. ISSN 0263-8231 (Print) 1879-3223 (Online)

Shakoorioskooie, Mahdieh and Menceloğlu, Yusuf Z. and Ünal, Serkan and Hayat Soytaş, Serap (2018) Rapid microwave-assisted synthesis of platinum nanoparticles immobilized in electrospun carbon nanofibers for electrochemical catalysis. ACS Applied Nano Materials, 1 (11). pp. 6236-6246. ISSN 2574-0970

Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2018) Efficient strategies for reliability-based design optimization of variable stiffness composite structures. Structural and Multidisciplinary Optimization, 57 (2). pp. 689-704. ISSN 1615-147X (Print) 1615-1488 (Online)

Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) Cost analysis of variable stiffness composite structures with application to a wind turbine blade. Composite Structures, 203 . pp. 681-695. ISSN 0263-8223 (Print) 1879-1085 (Online)

Tavakol Aghaei, Vahid and Onat, Ahmet and Yıldırım, Sinan (2018) A Markov chain Monte Carlo algorithm for Bayesian policy search. Systems Science and Control Engineering, 6 (1). pp. 438-455. ISSN 2164-2583

Topuz, Fuat and Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Menceloğlu, Yusuf Z. and Koç, Bahattin (2018) Nanosilicate embedded agarose hydrogels with improved bioactivity. Carbohydrate Polymers, 201 . pp. 105-112. ISSN 0144-8617 (Print) 1879-1344 (Online)

Tunç, Lütfi Taner (2018) Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1891-1909. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems. Mechanical Systems and Signal Processing, 111 . pp. 423-441. ISSN 0888-3270 (Print) 1096-1216 (Online)

Ulusoy, Gündüz (2018) İmalat sektöründe endüstri 4.0 dönüşümü çabaları: bazı gözlemler. İktisat ve Toplum, 8 (92). pp. 121-123. ISSN 1309-9418

Papers in Conference Proceedings

Akdeniz Skvortsov, Gözde and Piluso, Susanna and Altunbek, Mine and Khani, Navid and Oosterwyck, Hans Van and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin (2018) 3D bioprinting of cell-laden molecularly engineered PEG-based hydrogels. In: Biofabrication Conference 2018, Wurzberg, Germany

Barzegar Osgouei, Zahra and Özlü, Emre and Altan, Erhan and Budak, Erhan (2018) Heat modeling for third deformation zone. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Çakmak, Umut Can and Apaydın, Serkan Mehmet and Çatay, Bülent (2018) Traffic speed prediction with neural networks. In: Annual International Conference of the German Operations Research Society (GOR), Berlin, Germany

Kefal, Adnan and Haşim, Ahmet Kazım and Yıldız, Mehmet (2018) Isogeometric analysis of moderately thick composite beams and plates based on refined zigzag theory. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Kefal, Adnan and Sohouli, A. and Öterkuş, E. and Yıldız, Mehmet and Suleman, A. (2018) Topology optimization of cracked structures using peridynamics. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Keskin Özel, Merve and Laporte, Gilbert and Çatay, Bülent (2018) Electric vehicle routing problem with time dependent waiting times at recharging stations. In: 7th International Workshop on Freight Transportation and Logistics (ODYSSEUS 2018), Cagliari, Italy

Madenci, Erdoğan and Kefal, Adnan and Dördüncü, Mehmet and Barut, Atila and Yıldız, Mehmet (2018) Isogeometric analysis using peridynamics and XFEM. In: 59th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Kissimmee, USA

Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Koç, Bahattin (2018) Nanocomposite hydrogels of agarose/nanosilicates for 3D bioprinting applications. In: Biofabrication Conference 2018, Wurzberg, Germany

Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan (2018) An experimental study on surface errors in orthogonal turn-milling process. In: 9th International Congress on Machining (UTIS 2018), Antalya, Turkey

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Tool axis optimization for robotic 5-axis milling considering kinematics. In: 14th Conference on High Speed Machining Conference, San Sebastian (Accepted)

Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter (2018) Identification of the CIRP expertise network based on public data. In: 51st CIRP Conference on Manufacturing Systems, Stockholm, Sweden

Yılmaz, C. and Akalın, C. and Günal, I. and Çelik, H. and Büyük, M. and Suleman, A. and Yıldız, Mehmet (2018) Observation of damage accumulation under in-plane shear loading. In: Specialists' Meeting AVT-305 on Sensing Systems for Integrated Vehicle Health Management (IVHM) of Military Vehicles (NATO STO AVT-305), Athens, Greece

Book Section / Chapter

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Self-healing thermosetting composites: concepts, chemistry and future advances. In: Delville, Marie-Helene and Taubert, Andreas, (eds.) Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials. Wiley, UK. ISBN 9783527342556 (Print) 9783527807130 (Online)

Thesis

Bagherzadeh, Amin (2018) Experimental investigation of alternative cooling methods in machining operations. [Thesis]

Barak, Melike (2018) Synthesis and characterization of highly stable functional silica nanoparticles for LbL assembly. [Thesis]

Ebrahimi Araghizad, Arash (2018) Geometrical optimization of the broaching tools by leveling of the cutting forces. [Thesis]

Mercan, Safiye Canset (2018) A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response. [Thesis]

Özcan, Yiğit (2018) Analytical modeling of kerf profile for 3-axis abrasive waterjet machining (AWJM). [Thesis]