Items where Division is "Industrial Engineering" and Year is 2018

Group by: Creators | Item Type | No Grouping

Number of items: 62.

Article

Bagherzadeh, Amin and Budak, Erhan (2018) Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach. Tribology International, 119 . pp. 510-520. ISSN 0301-679X (Print) 1879-2464 (Online)

Boz, Zeynep and Gunnec, Dilek and Birbil, S. Ilker and Öztürk, M. Kaan (2018) Reassessment and monitoring of loan applications with machine learning. Applied Artificial Intelligence, 32 (9-10). pp. 939-955. ISSN 0883-9514 (Print) 1087-6545 (Online)

Bürgy, Reinhard and Bülbül, Kerem (2018) The job shop scheduling problem with convex costs. European Journal of Operational Research, 268 (1). pp. 82-100. ISSN 0377-2217 (Print) 1872-6860 (Online)

Demir, Eralp and Mercan, Safiye Canset (2018) A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response. International Journal of Machine Tools and Manufacture, 134 . pp. 25-41. ISSN 0890-6955 (Print) 1879-2170 (Online)

Elçi, Özgün and Noyan, Nilay (2018) A chance-constrained two-stage stochastic programming model for humanitarian relief network design. Transportation Research Part B: Methodological, 108 . pp. 55-83. ISSN 0191-2615

Elçi, Özgün and Noyan, Nilay and Bülbül, Kerem (2018) Chance-constrained stochastic programming under variable reliability levels with an application to humanitarian relief network design. Computers and Operations Research, 96 . pp. 91-107. ISSN 0305-0548 (Print) 1873-765X (Online)

Gilg, Brady and Klug, Torsten and Martienssen, Rosemarie and Paat, Joseph and Schlechte, Thomas and Schulz, Christof and Seymen, Senan and Tesch, Alexander (2018) Conflict-free railway track assignment at depots. Journal of Rail Transport Planning and Management, 8 (1). pp. 16-28. ISSN 2210-9706 (Print) 2210-9714 (Online)

Karadeniz Alver, Özlem and Ayvaz, Berk and Çatay, Bülent (2018) A multi-objective reverse logistics network design for waste electrical and electronic equipment: the case of Istanbul (Atık elektrikli ve elektronik eşyalar için çok amaçlı bir tersine lojistik ağ tasarımı: İstanbul uygulaması). Uludağ University Journal of The Faculty of Engineering, 23 (4). pp. 41-54. ISSN 2148-4147 (Print) 2148-4155 (Online)

Kayıkçı, Yaşanur and Mutlu, Aysun and Çatay, Bülent (2018) A decision support system and its application for international sea-rail multimodal freight transportation operations (Uluslararası deniz-demir yolu kombine yük taşımacılığı operasyonları için bir karar destek sistemi ve uygulaması). Uludağ University Journal of The Faculty of Engineering, 23 (4). pp. 99-116. ISSN 2148-4147 (Print) 2148-4155 (Online)

Keskin Özel, Merve and Çatay, Bülent (2018) A matheuristic method for the electric vehicle routing problem with time windows and fast chargers. Computers and Operations Research, 100 . pp. 172-188. ISSN 0305-0548 (Print) 1873-765X (Online)

Koca, Esra and Yaman, Hande and Aktürk, M. Selim (2018) Stochastic lot sizing problem with nervousness considerations. Computers and Operations Research, 94 . pp. 23-37. ISSN 0305-0548 (Print) 1873-765X (Online)

Kocuk, Burak and Dey, Santanu S. and Andy, X. Sun (2018) Matrix minor reformulation and SOCP-based spatial branch-and-cut method for the AC optimal power flow problem. Mathematical Programming Computation, 10 (4). pp. 557-596. ISSN 1867-2949 (Print) 1867-2957 (Online)

Kolak, Orhan İlker and Feyzioğlu, Orhan and Noyan, Nilay (2018) Bi-level multi-objective traffic network optimisation with sustainability perspective. Expert Systems with Applications, 104 . pp. 294-306. ISSN 0957-4174 (Print) 1873-6793 (Online)

Muter, İbrahim and Birbil, Ş. İlker and Bülbül, Kerem (2018) Benders decomposition and column-and-row generation for solving large-scale linear programs with column-dependent-rows. European Journal of Operational Research, 264 (1). pp. 29-45. ISSN 0377-2217 (Print) 1872-6860 (Online)

Noyan, Nilay and Kahvecioğlu, Gökçe (2018) Stochastic last mile relief network design with resource reallocation. OR Spectrum, 40 (1). pp. 187-231. ISSN 0171-6468 (Print) 1436-6304 (Online)

Noyan, Nilay and Rudolf, Gabor (2018) Optimization with stochastic preferences based on a general class of scalarization functions. Operations Research, 66 (2). pp. 463-486. ISSN 0030-364X (Print) 1526-5463 (Online)

Öztoprak, Figen and Birbil, Ş. İlker (2018) An alternative globalization strategy for unconstrained optimization. Optimization, 67 (3). pp. 377-392. ISSN 0233-1934 (Print) 1029-4945 (Online)

Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2018) Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1617-1634. ISSN 0268-3768 (Print) 1433-3015 (Online)

Sahba, Pedram and Balcıoğlu, Barış and Banjevic, Dragan (2018) Multilevel rationing policy for spare parts when demand is state dependent. OR Spectrum, 40 (3). pp. 751-780. ISSN 0171-6468 (Print) 1436-6304 (Online)

Shahmoradi, Zahed and Ünlüyurt, Tonguç (2018) Failure detection for series systems when tests are unreliable. Computers & Industrial Engineering, 118 . pp. 309-318. ISSN 0360-8352 (Print) 1879-0550 (Online)

Tavakol Aghaei, Vahid and Onat, Ahmet and Yıldırım, Sinan (2018) A Markov chain Monte Carlo algorithm for Bayesian policy search. Systems Science and Control Engineering, 6 (1). pp. 438-455. ISSN 2164-2583

Topuz, Fuat and Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Menceloğlu, Yusuf Z. and Koç, Bahattin (2018) Nanosilicate embedded agarose hydrogels with improved bioactivity. Carbohydrate Polymers, 201 . pp. 105-112. ISSN 0144-8617 (Print) 1879-1344 (Online)

Tunç, Lütfi Taner (2018) Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1891-1909. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems. Mechanical Systems and Signal Processing, 111 . pp. 423-441. ISSN 0888-3270 (Print) 1096-1216 (Online)

Yelbay, Belma and Birbil, Ş. İlker and Bülbül, Kerem and Jamil, Hasan M. (2018) Trade-offs computing minimum hub cover toward optimized labeled graph query processing. AJIT-e: Online Academic Journal of Information Technology, 9 (33). pp. 39-68. ISSN 1309-1581

Yüceoğlu, Birol and Birbil, Ş. İlker and Gürbüz, Özgür (2018) Dispersion with connectivity in wireless mesh networks. Journal of Industrial and Management Optimization, 14 (2). pp. 759-784. ISSN 1547-5816 (Print) 1553-166X (Online)

Papers in Conference Proceedings

Acar, Gizem and Öztürk, Özberk and Yapıcı, Murat Kaya (2018) Wearable graphene nanotextile embedded smart armband for cardiac monitoring. In: 17th IEEE SENSORS Conference, New Delhi, India

Atmacasoy, Abdullah and Ok, Ahmet and Şahin, Güvenç (2018) An evaluation of introduction to industrial engineering course at Sabanci University using CIPP model. In: 9th International Conference on Engineering Education for Sustainable Development (EESD2018), Glasboro, New Jersey, USA

Çakmak, Umut Can and Apaydın, Serkan Mehmet and Çatay, Bülent (2018) Traffic speed prediction with neural networks. In: Annual International Conference of the German Operations Research Society (GOR), Berlin, Germany

Çakmak, Umut Can and Çatay, Bülent and Apaydın, Serkan Mehmet (2018) A neural network approach for predicting speeds on road networks. In: 26th Signal Processing and Communications Applications Conference (SIU 2018), Izmir, Turkey

Jamshidi, Hamid and Budak, Erhan (2018) Grinding temperature modeling based on a time dependent heat source. In: 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary

Karadeniz Alver, Özlem and Ayvaz, Berk and Çatay, Bülent (2018) Elektrikli ve elektronik atıklar için tersine lojistik ağ tasarımı: İstanbul örneği. In: 7. Ulusal Lojistik ve Tedarik Zinciri Kongresi, Bursa, Türkiye

Keskin Özel, Merve and Laporte, Gilbert and Çatay, Bülent (2018) Electric vehicle routing problem with time dependent waiting times at recharging stations. In: 7th International Workshop on Freight Transportation and Logistics (ODYSSEUS 2018), Cagliari, Italy

Mutlu, Aysun and Kayıkçı, Yaşanur and Çatay, Bülent (2018) Deniz-demir yolu uluslararası kombine yük taşımacılığı operasyonları için karar destek sistemi. In: 7. Ulusal Lojistik ve Tedarik Zinciri Kongresi, Bursa, Türkiye

Özcan, Yiğit and Tunç, Lütfi Taner (2018) Investigation of surface mophology and integrity in multi axis abrasive waterjet machining (AWJM). In: International Symposium on Machining, Antalya, Turkey

Rahimzadeh Berenji, Kaveh and Kara, Mehmet Emre and Budak, Erhan (2018) Investigating high productivity conditions for turn-milling in comparison to conventional turning. In: 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary

Renken, Malte and Ahmadi Digehsara, Amin and Borndörfer, Ralf and Şahin, Güvenç and Schlechte, Thomas (2018) Demand-driven line planning with selfish routing. In: Annual International Conference of the German Operations Research Society (GOR), Berlin, Germany

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Kinematic based selection of the workpiece location in robotic milling. In: International Symposium on Machining, Antalya, Turkey

Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter (2018) Identification of the CIRP expertise network based on public data. In: 51st CIRP Conference on Manufacturing Systems, Stockholm, Sweden

Working Paper / Technical Report

Esmaeilialiabadi, Danial (2018) Carbon capture, utilization and storage in the context of Turkish energy market. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Küçüksayacıgil, Fikri and Ulusoy, Gündüz (2018) A hybrid genetic algorithm application for a bi-objective, multi-project, multi-mode, resource-constrained project scheduling problem. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Shawuti, Shalima and Difiglio, Carmine and Esmaeilialiabadi, Danial and Gülgün, Mehmet Ali and Öncel, Çınar and Yeşilyurt, Serhat (2018) Using natural gas as an environmentally sustainable power source with solid oxide fuel cells. [Working Paper / Technical Report] Sabanci University ID:UNSPECIFIED

Book Section / Chapter

Budak, Erhan (2018) Machining process improvement through process twins. In: Ni, Jun and Majstorovic, Vidosav D. and Djurdjanovic, Dragan, (eds.) Proceedings of 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Switzerland, pp. 164-179. ISBN 978-3-319-89562-8 (Print) 978-3-319-89563-5 (Online)

Noyan, Nilay (2018) Risk-averse stochastic modeling and optimization. In: Gel, Esma and NTAIMO, LEWIS, (eds.) Recent Advances in Optimization and Modeling of Contemporary Problems. INFORMS (Institute for Operations Research and Management Sciences), Catonsville, MD, USA, pp. 221-254. ISBN 978-0-9906153-2-3